diff mbox series

[v4,6/9] riscv: Add Kendryte K210 device tree

Message ID 20200316004744.209292-7-damien.lemoal@wdc.com (mailing list archive)
State New, archived
Headers show
Series Kendryte k210 SoC boards support | expand

Commit Message

Damien Le Moal March 16, 2020, 12:47 a.m. UTC 
Add a generic device tree for Kendryte K210 SoC based boards. This is
for now a very simple device tree describing the core elements of the
SoC. This is suitable (and tested) for the Kendryte KD233 development
board, the Sipeed MAIX M1 Dan Dock board and the Sipeed MAIXDUINO board.

Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Sean Anderson <seanga2@gmail.com>
---
 arch/riscv/boot/dts/Makefile           |   1 +
 arch/riscv/boot/dts/kendryte/Makefile  |   2 +
 arch/riscv/boot/dts/kendryte/k210.dts  |  23 +++++
 arch/riscv/boot/dts/kendryte/k210.dtsi | 123 +++++++++++++++++++++++++
 include/dt-bindings/clock/k210-clk.h   |  20 ++++
 5 files changed, 169 insertions(+)
 create mode 100644 arch/riscv/boot/dts/kendryte/Makefile
 create mode 100644 arch/riscv/boot/dts/kendryte/k210.dts
 create mode 100644 arch/riscv/boot/dts/kendryte/k210.dtsi
 create mode 100644 include/dt-bindings/clock/k210-clk.h
diff mbox series

Patch

diff --git a/arch/riscv/boot/dts/Makefile b/arch/riscv/boot/dts/Makefile
index 0bf2669aa12d..87815557f2db 100644
--- a/arch/riscv/boot/dts/Makefile
+++ b/arch/riscv/boot/dts/Makefile
@@ -3,4 +3,5 @@  ifneq ($(CONFIG_BUILTIN_DTB_SOURCE),"")
 obj-$(CONFIG_USE_BUILTIN_DTB) += $(patsubst "%",%,$(CONFIG_BUILTIN_DTB_SOURCE)).dtb.o
 else
 subdir-y += sifive
+subdir-y += kendryte
 endif
diff --git a/arch/riscv/boot/dts/kendryte/Makefile b/arch/riscv/boot/dts/kendryte/Makefile
new file mode 100644
index 000000000000..815444e69e89
--- /dev/null
+++ b/arch/riscv/boot/dts/kendryte/Makefile
@@ -0,0 +1,2 @@ 
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_SOC_KENDRYTE) += k210.dtb
diff --git a/arch/riscv/boot/dts/kendryte/k210.dts b/arch/riscv/boot/dts/kendryte/k210.dts
new file mode 100644
index 000000000000..0d1f28fce6b2
--- /dev/null
+++ b/arch/riscv/boot/dts/kendryte/k210.dts
@@ -0,0 +1,23 @@ 
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2020 Western Digital Corporation or its affiliates.
+ */
+
+/dts-v1/;
+
+#include "k210.dtsi"
+
+/ {
+	model = "Kendryte K210 generic";
+	compatible = "kendryte,k210";
+
+	chosen {
+		bootargs = "earlycon console=ttySIF0";
+		stdout-path = "serial0";
+	};
+};
+
+&uarths0 {
+	status = "okay";
+};
+
diff --git a/arch/riscv/boot/dts/kendryte/k210.dtsi b/arch/riscv/boot/dts/kendryte/k210.dtsi
new file mode 100644
index 000000000000..c1df56ccb8d5
--- /dev/null
+++ b/arch/riscv/boot/dts/kendryte/k210.dtsi
@@ -0,0 +1,123 @@ 
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2019 Sean Anderson <seanga2@gmail.com>
+ * Copyright (C) 2020 Western Digital Corporation or its affiliates.
+ */
+#include <dt-bindings/clock/k210-clk.h>
+
+/ {
+	/*
+	 * Although the K210 is a 64-bit CPU, the address bus is only 32-bits
+	 * wide, and the upper half of all addresses is ignored.
+	 */
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "kendryte,k210";
+
+	aliases {
+		serial0 = &uarths0;
+	};
+
+	/*
+	 * The K210 has an sv39 MMU following the priviledge specification v1.9.
+	 * Since this is a non-ratified draft specification, the kernel does not
+	 * support it and the K210 support enabled only for the !MMU case.
+	 * Be consistent with this by setting the CPUs MMU type to "none".
+	 */
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		timebase-frequency = <7800000>;
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			reg = <0>;
+			compatible = "kendryte,k210", "sifive,rocket0", "riscv";
+			riscv,isa = "rv64imafdc";
+			mmu-type = "none";
+			i-cache-size = <0x8000>;
+			i-cache-block-size = <64>;
+			d-cache-size = <0x8000>;
+			d-cache-block-size = <64>;
+			clocks = <&sysctl K210_CLK_CPU>;
+			clock-frequency = <390000000>;
+			cpu0_intc: interrupt-controller {
+				#interrupt-cells = <1>;
+				interrupt-controller;
+				compatible = "riscv,cpu-intc";
+			};
+		};
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			reg = <1>;
+			compatible = "kendryte,k210", "sifive,rocket0", "riscv";
+			riscv,isa = "rv64imafdc";
+			mmu-type = "none";
+			i-cache-size = <0x8000>;
+			i-cache-block-size = <64>;
+			d-cache-size = <0x8000>;
+			d-cache-block-size = <64>;
+			clocks = <&sysctl K210_CLK_CPU>;
+			clock-frequency = <390000000>;
+			cpu1_intc: interrupt-controller {
+				#interrupt-cells = <1>;
+				interrupt-controller;
+				compatible = "riscv,cpu-intc";
+			};
+		};
+	};
+
+	sram: memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x400000>,
+		      <0x80400000 0x200000>,
+		      <0x80600000 0x200000>;
+		reg-names = "sram0", "sram1", "aisram";
+	};
+
+	clocks {
+		in0: oscillator {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <26000000>;
+		};
+	};
+
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "kendryte,k210-soc", "simple-bus";
+		ranges;
+		interrupt-parent = <&plic0>;
+
+		sysctl: sysctl@50440000 {
+			compatible = "kendryte,k210-sysctl", "simple-mfd";
+			reg = <0x50440000 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		clint0: interrupt-controller@2000000 {
+			compatible = "riscv,clint0";
+			reg = <0x2000000 0xC000>;
+			interrupts-extended = <&cpu0_intc 3>,  <&cpu1_intc 3>;
+			clocks = <&sysctl K210_CLK_ACLK>;
+		};
+
+		plic0: interrupt-controller@c000000 {
+			#interrupt-cells = <1>;
+			interrupt-controller;
+			compatible = "kendryte,k210-plic0", "riscv,plic0";
+			reg = <0xC000000 0x4000000>;
+			interrupts-extended = <&cpu0_intc 11>, <&cpu0_intc 0xffffffff>,
+					      <&cpu1_intc 11>, <&cpu1_intc 0xffffffff>;
+			riscv,ndev = <65>;
+			riscv,max-priority = <7>;
+		};
+
+		uarths0: serial@38000000 {
+			compatible = "kendryte,k210-uarths", "sifive,uart0";
+			reg = <0x38000000 0x1000>;
+			interrupts = <33>;
+			clocks = <&sysctl K210_CLK_CPU>;
+		};
+	};
+};
diff --git a/include/dt-bindings/clock/k210-clk.h b/include/dt-bindings/clock/k210-clk.h
new file mode 100644
index 000000000000..5a2fd64d1a49
--- /dev/null
+++ b/include/dt-bindings/clock/k210-clk.h
@@ -0,0 +1,20 @@ 
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * Copyright (C) 2019-20 Sean Anderson <seanga2@gmail.com>
+ * Copyright (c) 2020 Western Digital Corporation or its affiliates.
+ */
+#ifndef K210_CLK_H
+#define K210_CLK_H
+
+/*
+ * Arbitrary identifiers for clocks.
+ * The structure is: in0 -> pll0 -> aclk -> cpu
+ *
+ * Since we use the hardware defaults for now, set all these to the same clock.
+ */
+#define K210_CLK_PLL0   0
+#define K210_CLK_PLL1   0
+#define K210_CLK_ACLK   0
+#define K210_CLK_CPU    0
+
+#endif /* K210_CLK_H */