| Message ID | 20201028232759.1928479-4-atish.patra@wdc.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | Add Microchip PolarFire Soc Support | expand |
On Thu, Oct 29, 2020 at 4:58 AM Atish Patra <atish.patra@wdc.com> wrote: > > Enable Microchip PolarFire ICICLE soc config in defconfig. > It allows the default upstream kernel to boot on PolarFire ICICLE board. > > Signed-off-by: Atish Patra <atish.patra@wdc.com> > --- > arch/riscv/configs/defconfig | 4 ++++ > 1 file changed, 4 insertions(+) > > diff --git a/arch/riscv/configs/defconfig b/arch/riscv/configs/defconfig > index d222d353d86d..2660fa05451e 100644 > --- a/arch/riscv/configs/defconfig > +++ b/arch/riscv/configs/defconfig > @@ -16,6 +16,7 @@ CONFIG_EXPERT=y > CONFIG_BPF_SYSCALL=y > CONFIG_SOC_SIFIVE=y > CONFIG_SOC_VIRT=y > +CONFIG_SOC_MICROCHIP_POLARFIRE=y > CONFIG_SMP=y > CONFIG_JUMP_LABEL=y > CONFIG_MODULES=y > @@ -79,6 +80,9 @@ CONFIG_USB_OHCI_HCD=y > CONFIG_USB_OHCI_HCD_PLATFORM=y > CONFIG_USB_STORAGE=y > CONFIG_USB_UAS=y > +CONFIG_SDHCI=y > +CONFIG_MMC_SDHCI_PLTFM=y > +CONFIG_MMC_SDHCI_CADENCE=y > CONFIG_MMC=y > CONFIG_MMC_SPI=y > CONFIG_RTC_CLASS=y > -- > 2.25.1 > Looks good to me. Reviewed-by: Anup Patel <anup@brainfault.org> Regards, Anup
On 30/10/2020 09:09, Anup Patel wrote: > On Thu, Oct 29, 2020 at 4:58 AM Atish Patra <atish.patra@wdc.com> wrote: >> >> Enable Microchip PolarFire ICICLE soc config in defconfig. >> It allows the default upstream kernel to boot on PolarFire ICICLE board. >> >> Signed-off-by: Atish Patra <atish.patra@wdc.com> >> --- Is there going to be a git tree with all the necessary support for the polarfire/icicle boards? I so far have updated yocto patches, a rebase to v5.9 and the v17 PCIe patches (which still don't work for us)
On Thu, Oct 29, 2020 at 6:00 PM Atish Patra <atish.patra@wdc.com> wrote: > > Enable Microchip PolarFire ICICLE soc config in defconfig. > It allows the default upstream kernel to boot on PolarFire ICICLE board. > > Signed-off-by: Atish Patra <atish.patra@wdc.com> > --- > arch/riscv/configs/defconfig | 4 ++++ > 1 file changed, 4 insertions(+) > Reviewed-by: Bin Meng <bin.meng@windriver.com>
On Wed, 28 Oct 2020 16:27:59 PDT (-0700), Atish Patra wrote: > Enable Microchip PolarFire ICICLE soc config in defconfig. > It allows the default upstream kernel to boot on PolarFire ICICLE board. I don't actually have one of these to test on yet. That said, if it boots for you then I don't really see any reason to delay this -- maybe there's some issues floating around, but I don't really see any reason to delay putting this on for-next. I'd even go so far as to say we should take it during the RCs, as so far it's just build/DT stuff. Given that this is currently the only production RISC-V Linux board I don't really any reason not to add it to the defconfigs. Is there a reason this is an RFC? > > Signed-off-by: Atish Patra <atish.patra@wdc.com> > --- > arch/riscv/configs/defconfig | 4 ++++ > 1 file changed, 4 insertions(+) > > diff --git a/arch/riscv/configs/defconfig b/arch/riscv/configs/defconfig > index d222d353d86d..2660fa05451e 100644 > --- a/arch/riscv/configs/defconfig > +++ b/arch/riscv/configs/defconfig > @@ -16,6 +16,7 @@ CONFIG_EXPERT=y > CONFIG_BPF_SYSCALL=y > CONFIG_SOC_SIFIVE=y > CONFIG_SOC_VIRT=y > +CONFIG_SOC_MICROCHIP_POLARFIRE=y > CONFIG_SMP=y > CONFIG_JUMP_LABEL=y > CONFIG_MODULES=y > @@ -79,6 +80,9 @@ CONFIG_USB_OHCI_HCD=y > CONFIG_USB_OHCI_HCD_PLATFORM=y > CONFIG_USB_STORAGE=y > CONFIG_USB_UAS=y > +CONFIG_SDHCI=y > +CONFIG_MMC_SDHCI_PLTFM=y > +CONFIG_MMC_SDHCI_CADENCE=y > CONFIG_MMC=y > CONFIG_MMC_SPI=y > CONFIG_RTC_CLASS=y Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com>
diff --git a/arch/riscv/configs/defconfig b/arch/riscv/configs/defconfig index d222d353d86d..2660fa05451e 100644 --- a/arch/riscv/configs/defconfig +++ b/arch/riscv/configs/defconfig @@ -16,6 +16,7 @@ CONFIG_EXPERT=y CONFIG_BPF_SYSCALL=y CONFIG_SOC_SIFIVE=y CONFIG_SOC_VIRT=y +CONFIG_SOC_MICROCHIP_POLARFIRE=y CONFIG_SMP=y CONFIG_JUMP_LABEL=y CONFIG_MODULES=y @@ -79,6 +80,9 @@ CONFIG_USB_OHCI_HCD=y CONFIG_USB_OHCI_HCD_PLATFORM=y CONFIG_USB_STORAGE=y CONFIG_USB_UAS=y +CONFIG_SDHCI=y +CONFIG_MMC_SDHCI_PLTFM=y +CONFIG_MMC_SDHCI_CADENCE=y CONFIG_MMC=y CONFIG_MMC_SPI=y CONFIG_RTC_CLASS=y
Enable Microchip PolarFire ICICLE soc config in defconfig. It allows the default upstream kernel to boot on PolarFire ICICLE board. Signed-off-by: Atish Patra <atish.patra@wdc.com> --- arch/riscv/configs/defconfig | 4 ++++ 1 file changed, 4 insertions(+)