diff mbox series

[25/32] dt-bindings: Document kendryte,k210-rst bindings

Message ID 20201107081420.60325-26-damien.lemoal@wdc.com (mailing list archive)
State New, archived
Headers show
Series RISC-V Kendryte K210 support improvments | expand

Commit Message

Damien Le Moal Nov. 7, 2020, 8:14 a.m. UTC 
Document the device tree bindings for the Kendryte K210 SoC reset
controller driver in
Documentation/devicetree/bindings/reset/kendryte,k210-rst.yaml.

Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
---
 .../bindings/reset/kendryte,k210-rst.yaml     | 78 +++++++++++++++++++
 1 file changed, 78 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/reset/kendryte,k210-rst.yaml

Comments

Sean Anderson Nov. 7, 2020, 2:07 p.m. UTC | #1 
On 11/7/20 3:14 AM, Damien Le Moal wrote:
> Document the device tree bindings for the Kendryte K210 SoC reset
> controller driver in
> Documentation/devicetree/bindings/reset/kendryte,k210-rst.yaml.
> 
> Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
> ---
>  .../bindings/reset/kendryte,k210-rst.yaml     | 78 +++++++++++++++++++
>  1 file changed, 78 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/reset/kendryte,k210-rst.yaml
> 
> diff --git a/Documentation/devicetree/bindings/reset/kendryte,k210-rst.yaml b/Documentation/devicetree/bindings/reset/kendryte,k210-rst.yaml
> new file mode 100644
> index 000000000000..bdd0bf37bdfb
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/reset/kendryte,k210-rst.yaml
> @@ -0,0 +1,78 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/reset/kendryte,k210-rst.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Kendryte K210 Reset Controller Device Tree Bindings
> +
> +maintainers:
> +  - Damien Le Moal <damien.lemoal@wdc.com>
> +
> +description: |
> +  Kendryte K210 reset controller driver which support the system controller
> +  subsystem supplied reset registers for the various peripherals within
> +  the SoC.
> +
> +  See also:
> +  - dt-bindings/reset/k210-rst.h
> +
> +properties:
> +  compatible:
> +    allOf:
> +      - items:
> +        - const: kendryte,k210-rst
> +        - const: syscon-reset
> +
> +  regmap:
> +    maxItems: 1
> +    description: phandle of the system controller (sysctl) node
> +
> +  offset:
> +    maxItems: 1
> +    description: peripheral reset register offset in the system controller
> +      controller register map
> +
> +  mask:
> +    maxItems: 1
> +    description: bit-mask indicating valid reset bits in the reset register
> +
> +  assert-high:
> +    maxItems: 1
> +    description: bit value to write when asserting a reset
> +
> +  '#reset-cells':
> +    const: 1
> +
> +required:
> +  - '#reset-cells'
> +  - compatible
> +  - regmap
> +  - offset
> +  - mask
> +  - assert-high
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/mfd/k210-sysctl.h>
> +    #include <dt-bindings/reset/k210-rst.h>
> +
> +    sysctl: system-controller@50440000 {
> +      #address-cells = <1>;
> +      #size-cells = <1>;
> +      compatible = "kendryte,k210-sysctl",
> +                   "syscon", "simple-mfd";
> +      reg = <0x50440000 0x1000>;
> +      /* ... */
> +      sysrst: reset-controller {
> +        compatible = "kendryte,k210-rst",
> +                      "syscon-reset";
> +        #reset-cells = <1>;
> +        regmap = <&sysctl>;
> +        offset = <K210_SYSCTL_PERI_RESET>;
> +        mask = <0x27FFFFFF>;
> +        assert-high = <1>;
> +      };
> +    };
> 

Reviewed-by: Sean Anderson <seanga2@gmail.com>
Rob Herring (Arm) Nov. 9, 2020, 3:37 p.m. UTC | #2 
On Sat, 07 Nov 2020 17:14:13 +0900, Damien Le Moal wrote:
> Document the device tree bindings for the Kendryte K210 SoC reset
> controller driver in
> Documentation/devicetree/bindings/reset/kendryte,k210-rst.yaml.
> 
> Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
> ---
>  .../bindings/reset/kendryte,k210-rst.yaml     | 78 +++++++++++++++++++
>  1 file changed, 78 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/reset/kendryte,k210-rst.yaml
> 


My bot found errors running 'make dt_binding_check' on your patch:

yamllint warnings/errors:
./Documentation/devicetree/bindings/reset/kendryte,k210-rst.yaml:24:9: [warning] wrong indentation: expected 10 but found 8 (indentation)

dtschema/dtc warnings/errors:
Documentation/devicetree/bindings/reset/kendryte,k210-rst.example.dts:19:18: fatal error: dt-bindings/mfd/k210-sysctl.h: No such file or directory
   19 |         #include <dt-bindings/mfd/k210-sysctl.h>
      |                  ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
compilation terminated.
make[1]: *** [scripts/Makefile.lib:342: Documentation/devicetree/bindings/reset/kendryte,k210-rst.example.dt.yaml] Error 1
make[1]: *** Waiting for unfinished jobs....
make: *** [Makefile:1364: dt_binding_check] Error 2


See https://patchwork.ozlabs.org/patch/1396082

The base for the patch is generally the last rc1. Any dependencies
should be noted.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit.
Rob Herring (Arm) Nov. 9, 2020, 3:41 p.m. UTC | #3 
On Sat, Nov 07, 2020 at 05:14:13PM +0900, Damien Le Moal wrote:
> Document the device tree bindings for the Kendryte K210 SoC reset
> controller driver in
> Documentation/devicetree/bindings/reset/kendryte,k210-rst.yaml.
> 
> Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
> ---
>  .../bindings/reset/kendryte,k210-rst.yaml     | 78 +++++++++++++++++++
>  1 file changed, 78 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/reset/kendryte,k210-rst.yaml
> 
> diff --git a/Documentation/devicetree/bindings/reset/kendryte,k210-rst.yaml b/Documentation/devicetree/bindings/reset/kendryte,k210-rst.yaml
> new file mode 100644
> index 000000000000..bdd0bf37bdfb
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/reset/kendryte,k210-rst.yaml
> @@ -0,0 +1,78 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/reset/kendryte,k210-rst.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Kendryte K210 Reset Controller Device Tree Bindings
> +
> +maintainers:
> +  - Damien Le Moal <damien.lemoal@wdc.com>
> +
> +description: |
> +  Kendryte K210 reset controller driver which support the system controller
> +  subsystem supplied reset registers for the various peripherals within
> +  the SoC.
> +
> +  See also:
> +  - dt-bindings/reset/k210-rst.h
> +
> +properties:
> +  compatible:
> +    allOf:
> +      - items:
> +        - const: kendryte,k210-rst

> +        - const: syscon-reset

This is not a generic thing.

> +
> +  regmap:
> +    maxItems: 1
> +    description: phandle of the system controller (sysctl) node
> +
> +  offset:
> +    maxItems: 1
> +    description: peripheral reset register offset in the system controller
> +      controller register map
> +
> +  mask:
> +    maxItems: 1
> +    description: bit-mask indicating valid reset bits in the reset register

You don't need this. Just don't use invalid cell values.

> +
> +  assert-high:
> +    maxItems: 1
> +    description: bit value to write when asserting a reset

Should be implied by the compatible string.

> +
> +  '#reset-cells':
> +    const: 1
> +
> +required:
> +  - '#reset-cells'
> +  - compatible
> +  - regmap
> +  - offset
> +  - mask
> +  - assert-high
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/mfd/k210-sysctl.h>
> +    #include <dt-bindings/reset/k210-rst.h>
> +
> +    sysctl: system-controller@50440000 {
> +      #address-cells = <1>;
> +      #size-cells = <1>;
> +      compatible = "kendryte,k210-sysctl",
> +                   "syscon", "simple-mfd";
> +      reg = <0x50440000 0x1000>;
> +      /* ... */
> +      sysrst: reset-controller {
> +        compatible = "kendryte,k210-rst",
> +                      "syscon-reset";
> +        #reset-cells = <1>;
> +        regmap = <&sysctl>;

That's just the parent node, you don't need this.

> +        offset = <K210_SYSCTL_PERI_RESET>;

Use 'reg'.

> +        mask = <0x27FFFFFF>;
> +        assert-high = <1>;
> +      };
> +    };
> -- 
> 2.28.0
>
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/reset/kendryte,k210-rst.yaml b/Documentation/devicetree/bindings/reset/kendryte,k210-rst.yaml
new file mode 100644
index 000000000000..bdd0bf37bdfb
--- /dev/null
+++ b/Documentation/devicetree/bindings/reset/kendryte,k210-rst.yaml
@@ -0,0 +1,78 @@ 
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/reset/kendryte,k210-rst.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Kendryte K210 Reset Controller Device Tree Bindings
+
+maintainers:
+  - Damien Le Moal <damien.lemoal@wdc.com>
+
+description: |
+  Kendryte K210 reset controller driver which support the system controller
+  subsystem supplied reset registers for the various peripherals within
+  the SoC.
+
+  See also:
+  - dt-bindings/reset/k210-rst.h
+
+properties:
+  compatible:
+    allOf:
+      - items:
+        - const: kendryte,k210-rst
+        - const: syscon-reset
+
+  regmap:
+    maxItems: 1
+    description: phandle of the system controller (sysctl) node
+
+  offset:
+    maxItems: 1
+    description: peripheral reset register offset in the system controller
+      controller register map
+
+  mask:
+    maxItems: 1
+    description: bit-mask indicating valid reset bits in the reset register
+
+  assert-high:
+    maxItems: 1
+    description: bit value to write when asserting a reset
+
+  '#reset-cells':
+    const: 1
+
+required:
+  - '#reset-cells'
+  - compatible
+  - regmap
+  - offset
+  - mask
+  - assert-high
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/mfd/k210-sysctl.h>
+    #include <dt-bindings/reset/k210-rst.h>
+
+    sysctl: system-controller@50440000 {
+      #address-cells = <1>;
+      #size-cells = <1>;
+      compatible = "kendryte,k210-sysctl",
+                   "syscon", "simple-mfd";
+      reg = <0x50440000 0x1000>;
+      /* ... */
+      sysrst: reset-controller {
+        compatible = "kendryte,k210-rst",
+                      "syscon-reset";
+        #reset-cells = <1>;
+        regmap = <&sysctl>;
+        offset = <K210_SYSCTL_PERI_RESET>;
+        mask = <0x27FFFFFF>;
+        assert-high = <1>;
+      };
+    };