new file mode 100644
@@ -0,0 +1,204 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2019-20 Sean Anderson <seanga2@gmail.com>
+ * Copyright (C) 2020 Western Digital Corporation or its affiliates.
+ */
+
+/dts-v1/;
+
+#include "k210.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ model = "SiPeed MAIXDUINO";
+ compatible = "sipeed,maixduino", "canaan,kendryte-k210";
+
+ chosen {
+ bootargs = "earlycon console=ttySIF0";
+ stdout-path = "serial0:115200n8";
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ boot {
+ label = "BOOT";
+ linux,code = <BTN_0>;
+ gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ sound {
+ compatible = "simple-audio-card";
+ simple-audio-card,format = "i2s";
+ status = "disabled";
+
+ simple-audio-card,cpu {
+ sound-dai = <&i2s0 0>;
+ };
+
+ simple-audio-card,codec {
+ sound-dai = <&mic>;
+ };
+ };
+
+ mic: mic {
+ #sound-dai-cells = <0>;
+ compatible = "memsensing,msm261s4030h0";
+ status = "disabled";
+ };
+
+ vcc_3v3: regulator-3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+};
+
+&fpioa {
+ status = "okay";
+
+ uarths_pinctrl: uarths-pinmux {
+ pinmux = <K210_FPIOA(4, K210_PCF_UARTHS_RX)>, /* Header "0" */
+ <K210_FPIOA(5, K210_PCF_UARTHS_TX)>; /* Header "1" */
+ };
+
+ gpio_pinctrl: gpio-pinmux {
+ pinmux = <K210_FPIOA(8, K210_PCF_GPIO0)>,
+ <K210_FPIOA(9, K210_PCF_GPIO1)>;
+ };
+
+ gpiohs_pinctrl: gpiohs-pinmux {
+ pinmux = <K210_FPIOA(16, K210_PCF_GPIOHS0)>, /* BOOT */
+ <K210_FPIOA(21, K210_PCF_GPIOHS2)>, /* Header "2" */
+ <K210_FPIOA(22, K210_PCF_GPIOHS3)>, /* Header "3" */
+ <K210_FPIOA(23, K210_PCF_GPIOHS4)>, /* Header "4" */
+ <K210_FPIOA(24, K210_PCF_GPIOHS5)>, /* Header "5" */
+ <K210_FPIOA(32, K210_PCF_GPIOHS6)>, /* Header "6" */
+ <K210_FPIOA(15, K210_PCF_GPIOHS7)>, /* Header "7" */
+ <K210_FPIOA(14, K210_PCF_GPIOHS8)>, /* Header "8" */
+ <K210_FPIOA(13, K210_PCF_GPIOHS9)>, /* Header "9" */
+ <K210_FPIOA(12, K210_PCF_GPIOHS10)>, /* Header "10" */
+ <K210_FPIOA(11, K210_PCF_GPIOHS11)>, /* Header "11" */
+ <K210_FPIOA(10, K210_PCF_GPIOHS12)>, /* Header "12" */
+ <K210_FPIOA(3, K210_PCF_GPIOHS13)>; /* Header "13" */
+ };
+
+ i2s0_pinctrl: i2s0-pinmux {
+ pinmux = <K210_FPIOA(18, K210_PCF_I2S0_SCLK)>,
+ <K210_FPIOA(19, K210_PCF_I2S0_WS)>,
+ <K210_FPIOA(20, K210_PCF_I2S0_IN_D0)>;
+ };
+
+ spi1_pinctrl: spi1-pinmux {
+ pinmux = <K210_FPIOA(26, K210_PCF_SPI1_D1)>,
+ <K210_FPIOA(27, K210_PCF_SPI1_SCLK)>,
+ <K210_FPIOA(28, K210_PCF_SPI1_D0)>,
+ <K210_FPIOA(29, K210_PCF_GPIO2)>; /* cs */
+ };
+
+ i2c1_pinctrl: i2c1-pinmux {
+ pinmux = <K210_FPIOA(30, K210_PCF_I2C1_SCLK)>, /* Header "scl" */
+ <K210_FPIOA(31, K210_PCF_I2C1_SDA)>; /* Header "sda" */
+ };
+
+ i2s1_pinctrl: i2s1-pinmux {
+ pinmux = <K210_FPIOA(33, K210_PCF_I2S1_WS)>,
+ <K210_FPIOA(34, K210_PCF_I2S1_IN_D0)>,
+ <K210_FPIOA(35, K210_PCF_I2S1_SCLK)>;
+ };
+
+ spi0_pinctrl: spi0-pinmux {
+ pinmux = <K210_FPIOA(36, K210_PCF_GPIOHS20)>, /* cs */
+ <K210_FPIOA(37, K210_PCF_GPIOHS21)>, /* rst */
+ <K210_FPIOA(38, K210_PCF_GPIOHS22)>, /* dc */
+ <K210_FPIOA(39, K210_PCF_SPI0_SCLK)>; /* wr */
+ };
+
+ dvp_pinctrl: dvp-pinmux {
+ pinmux = <K210_FPIOA(40, K210_PCF_SCCB_SDA)>,
+ <K210_FPIOA(41, K210_PCF_SCCB_SCLK)>,
+ <K210_FPIOA(42, K210_PCF_DVP_RST)>,
+ <K210_FPIOA(43, K210_PCF_DVP_VSYNC)>,
+ <K210_FPIOA(44, K210_PCF_DVP_PWDN)>,
+ <K210_FPIOA(45, K210_PCF_DVP_HSYNC)>,
+ <K210_FPIOA(46, K210_PCF_DVP_XCLK)>,
+ <K210_FPIOA(47, K210_PCF_DVP_PCLK)>;
+ };
+};
+
+&uarths0 {
+ pinctrl-0 = <&uarths_pinctrl>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
+&gpio0 {
+ pinctrl-0 = <&gpiohs_pinctrl>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
+&gpio1 {
+ pinctrl-0 = <&gpio_pinctrl>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
+&i2s0 {
+ #sound-dai-cells = <1>;
+ pinctrl-0 = <&i2s0_pinctrl>;
+ pinctrl-names = "default";
+};
+
+&i2c1 {
+ pinctrl-0 = <&i2c1_pinctrl>;
+ pinctrl-names = "default";
+ clock-frequency = <400000>;
+ status = "okay";
+};
+
+&spi0 {
+ pinctrl-0 = <&spi0_pinctrl>;
+ pinctrl-names = "default";
+ num-cs = <1>;
+ cs-gpios = <&gpio0 20 GPIO_ACTIVE_HIGH>;
+
+ panel@0 {
+ compatible = "sitronix,st7789v";
+ reg = <0>;
+ reset-gpios = <&gpio0 21 GPIO_ACTIVE_LOW>;
+ dc-gpios = <&gpio0 22 0>;
+ spi-max-frequency = <15000000>;
+ power-supply = <&vcc_3v3>;
+ };
+};
+
+&spi1 {
+ pinctrl-0 = <&spi1_pinctrl>;
+ pinctrl-names = "default";
+ num-cs = <1>;
+ cs-gpios = <&gpio1_0 2 GPIO_ACTIVE_LOW>;
+ status = "okay";
+
+ slot@0 {
+ compatible = "mmc-spi-slot";
+ reg = <0>;
+ voltage-ranges = <3300 3300>;
+ spi-max-frequency = <25000000>;
+ broken-cd;
+ };
+};
+
+&spi3 {
+ spi-flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <50000000>;
+ m25p,fast-read;
+ broken-flash-reset;
+ };
+};
Add the device tree sipeed_maixduino.dts for the SiPeed MAIXDUINO board. This device tree enables LEDs and spi/mmc SD card device. Additionally, gpios and i2c are also enabled and mapped to the board header pins as indicated on the board itself. Cc: Rob Herring <robh@kernel.org> Cc: devicetree@vger.kernel.org Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> --- .../boot/dts/canaan/sipeed_maixduino.dts | 204 ++++++++++++++++++ 1 file changed, 204 insertions(+) create mode 100644 arch/riscv/boot/dts/canaan/sipeed_maixduino.dts