diff mbox series

[v6,2/3] powerpc: Move script to check relocations at compile time in scripts/

Message ID 20210518101252.1484465-3-alex@ghiti.fr (mailing list archive)
State New, archived
Headers show
Series Introduce 64b relocatable kernel | expand

Commit Message

Alexandre Ghiti May 18, 2021, 10:12 a.m. UTC
Relocating kernel at runtime is done very early in the boot process, so
it is not convenient to check for relocations there and react in case a
relocation was not expected.

Powerpc architecture has a script that allows to check at compile time
for such unexpected relocations: extract the common logic to scripts/
so that other architectures can take advantage of it.

Signed-off-by: Alexandre Ghiti <alex@ghiti.fr>
Reviewed-by: Anup Patel <anup@brainfault.org>
---
 arch/powerpc/tools/relocs_check.sh | 18 ++----------------
 scripts/relocs_check.sh            | 20 ++++++++++++++++++++
 2 files changed, 22 insertions(+), 16 deletions(-)
 create mode 100755 scripts/relocs_check.sh

Comments

Michael Ellerman May 19, 2021, 1:09 a.m. UTC | #1
Alexandre Ghiti <alex@ghiti.fr> writes:
> Relocating kernel at runtime is done very early in the boot process, so
> it is not convenient to check for relocations there and react in case a
> relocation was not expected.
>
> Powerpc architecture has a script that allows to check at compile time
> for such unexpected relocations: extract the common logic to scripts/
> so that other architectures can take advantage of it.
>
> Signed-off-by: Alexandre Ghiti <alex@ghiti.fr>
> Reviewed-by: Anup Patel <anup@brainfault.org>
> ---
>  arch/powerpc/tools/relocs_check.sh | 18 ++----------------
>  scripts/relocs_check.sh            | 20 ++++++++++++++++++++
>  2 files changed, 22 insertions(+), 16 deletions(-)
>  create mode 100755 scripts/relocs_check.sh

I'm not sure that script is really big/complicated enough to warrant
sharing vs just copying, but I don't mind either.

Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)

cheers

> diff --git a/arch/powerpc/tools/relocs_check.sh b/arch/powerpc/tools/relocs_check.sh
> index 014e00e74d2b..e367895941ae 100755
> --- a/arch/powerpc/tools/relocs_check.sh
> +++ b/arch/powerpc/tools/relocs_check.sh
> @@ -15,21 +15,8 @@ if [ $# -lt 3 ]; then
>  	exit 1
>  fi
>  
> -# Have Kbuild supply the path to objdump and nm so we handle cross compilation.
> -objdump="$1"
> -nm="$2"
> -vmlinux="$3"
> -
> -# Remove from the bad relocations those that match an undefined weak symbol
> -# which will result in an absolute relocation to 0.
> -# Weak unresolved symbols are of that form in nm output:
> -# "                  w _binary__btf_vmlinux_bin_end"
> -undef_weak_symbols=$($nm "$vmlinux" | awk '$1 ~ /w/ { print $2 }')
> -
>  bad_relocs=$(
> -$objdump -R "$vmlinux" |
> -	# Only look at relocation lines.
> -	grep -E '\<R_' |
> +${srctree}/scripts/relocs_check.sh "$@" |
>  	# These relocations are okay
>  	# On PPC64:
>  	#	R_PPC64_RELATIVE, R_PPC64_NONE
> @@ -43,8 +30,7 @@ R_PPC_ADDR16_LO
>  R_PPC_ADDR16_HI
>  R_PPC_ADDR16_HA
>  R_PPC_RELATIVE
> -R_PPC_NONE' |
> -	([ "$undef_weak_symbols" ] && grep -F -w -v "$undef_weak_symbols" || cat)
> +R_PPC_NONE'
>  )
>  
>  if [ -z "$bad_relocs" ]; then
> diff --git a/scripts/relocs_check.sh b/scripts/relocs_check.sh
> new file mode 100755
> index 000000000000..137c660499f3
> --- /dev/null
> +++ b/scripts/relocs_check.sh
> @@ -0,0 +1,20 @@
> +#!/bin/sh
> +# SPDX-License-Identifier: GPL-2.0-or-later
> +
> +# Get a list of all the relocations, remove from it the relocations
> +# that are known to be legitimate and return this list to arch specific
> +# script that will look for suspicious relocations.
> +
> +objdump="$1"
> +nm="$2"
> +vmlinux="$3"
> +
> +# Remove from the possible bad relocations those that match an undefined
> +# weak symbol which will result in an absolute relocation to 0.
> +# Weak unresolved symbols are of that form in nm output:
> +# "                  w _binary__btf_vmlinux_bin_end"
> +undef_weak_symbols=$($nm "$vmlinux" | awk '$1 ~ /w/ { print $2 }')
> +
> +$objdump -R "$vmlinux" |
> +	grep -E '\<R_' |
> +	([ "$undef_weak_symbols" ] && grep -F -w -v "$undef_weak_symbols" || cat)
> -- 
> 2.30.2
>
>
> _______________________________________________
> linux-riscv mailing list
> linux-riscv@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-riscv
diff mbox series

Patch

diff --git a/arch/powerpc/tools/relocs_check.sh b/arch/powerpc/tools/relocs_check.sh
index 014e00e74d2b..e367895941ae 100755
--- a/arch/powerpc/tools/relocs_check.sh
+++ b/arch/powerpc/tools/relocs_check.sh
@@ -15,21 +15,8 @@  if [ $# -lt 3 ]; then
 	exit 1
 fi
 
-# Have Kbuild supply the path to objdump and nm so we handle cross compilation.
-objdump="$1"
-nm="$2"
-vmlinux="$3"
-
-# Remove from the bad relocations those that match an undefined weak symbol
-# which will result in an absolute relocation to 0.
-# Weak unresolved symbols are of that form in nm output:
-# "                  w _binary__btf_vmlinux_bin_end"
-undef_weak_symbols=$($nm "$vmlinux" | awk '$1 ~ /w/ { print $2 }')
-
 bad_relocs=$(
-$objdump -R "$vmlinux" |
-	# Only look at relocation lines.
-	grep -E '\<R_' |
+${srctree}/scripts/relocs_check.sh "$@" |
 	# These relocations are okay
 	# On PPC64:
 	#	R_PPC64_RELATIVE, R_PPC64_NONE
@@ -43,8 +30,7 @@  R_PPC_ADDR16_LO
 R_PPC_ADDR16_HI
 R_PPC_ADDR16_HA
 R_PPC_RELATIVE
-R_PPC_NONE' |
-	([ "$undef_weak_symbols" ] && grep -F -w -v "$undef_weak_symbols" || cat)
+R_PPC_NONE'
 )
 
 if [ -z "$bad_relocs" ]; then
diff --git a/scripts/relocs_check.sh b/scripts/relocs_check.sh
new file mode 100755
index 000000000000..137c660499f3
--- /dev/null
+++ b/scripts/relocs_check.sh
@@ -0,0 +1,20 @@ 
+#!/bin/sh
+# SPDX-License-Identifier: GPL-2.0-or-later
+
+# Get a list of all the relocations, remove from it the relocations
+# that are known to be legitimate and return this list to arch specific
+# script that will look for suspicious relocations.
+
+objdump="$1"
+nm="$2"
+vmlinux="$3"
+
+# Remove from the possible bad relocations those that match an undefined
+# weak symbol which will result in an absolute relocation to 0.
+# Weak unresolved symbols are of that form in nm output:
+# "                  w _binary__btf_vmlinux_bin_end"
+undef_weak_symbols=$($nm "$vmlinux" | awk '$1 ~ /w/ { print $2 }')
+
+$objdump -R "$vmlinux" |
+	grep -E '\<R_' |
+	([ "$undef_weak_symbols" ] && grep -F -w -v "$undef_weak_symbols" || cat)