diff mbox series

[v3,14/16] serial: 8250_dw: Add StarFive JH7100 quirk

Message ID 20211102161125.1144023-15-kernel@esmil.dk (mailing list archive)
State New, archived
Headers show
Series Basic StarFive JH7100 RISC-V SoC support | expand

Commit Message

Emil Renner Berthing Nov. 2, 2021, 4:11 p.m. UTC
On the StarFive JH7100 RISC-V SoC the UART core clocks can't be set to
exactly 16 * 115200Hz and many other common bitrates. Trying this will
only result in a higher input clock, but low enough that the UART's
internal divisor can't come close enough to the baud rate target.
So rather than try to set the input clock it's better to skip the
clk_set_rate call and rely solely on the UART's internal divisor.

Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
---
 drivers/tty/serial/8250/8250_dw.c | 3 +++
 1 file changed, 3 insertions(+)

Comments

Andy Shevchenko Nov. 2, 2021, 8:14 p.m. UTC | #1
On Tue, Nov 2, 2021 at 6:44 PM Emil Renner Berthing <kernel@esmil.dk> wrote:
>
> On the StarFive JH7100 RISC-V SoC the UART core clocks can't be set to
> exactly 16 * 115200Hz and many other common bitrates. Trying this will
> only result in a higher input clock, but low enough that the UART's
> internal divisor can't come close enough to the baud rate target.
> So rather than try to set the input clock it's better to skip the
> clk_set_rate call and rely solely on the UART's internal divisor.

Bingo!
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>

> Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
> ---
>  drivers/tty/serial/8250/8250_dw.c | 3 +++
>  1 file changed, 3 insertions(+)
>
> diff --git a/drivers/tty/serial/8250/8250_dw.c b/drivers/tty/serial/8250/8250_dw.c
> index 53f57c3b9f42..1769808031c5 100644
> --- a/drivers/tty/serial/8250/8250_dw.c
> +++ b/drivers/tty/serial/8250/8250_dw.c
> @@ -414,6 +414,8 @@ static void dw8250_quirks(struct uart_port *p, struct dw8250_data *data)
>
>                 if (of_device_is_compatible(np, "marvell,armada-38x-uart"))
>                         p->serial_out = dw8250_serial_out38x;
> +               if (of_device_is_compatible(np, "starfive,jh7100-uart"))
> +                       p->set_termios = dw8250_do_set_termios;
>
>         } else if (acpi_dev_present("APMC0D08", NULL, -1)) {
>                 p->iotype = UPIO_MEM32;
> @@ -696,6 +698,7 @@ static const struct of_device_id dw8250_of_match[] = {
>         { .compatible = "cavium,octeon-3860-uart" },
>         { .compatible = "marvell,armada-38x-uart" },
>         { .compatible = "renesas,rzn1-uart" },
> +       { .compatible = "starfive,jh7100-uart" },
>         { /* Sentinel */ }
>  };
>  MODULE_DEVICE_TABLE(of, dw8250_of_match);
> --
> 2.33.1
>
Geert Uytterhoeven Nov. 8, 2021, 9:32 a.m. UTC | #2
Hi Esmil,

On Tue, Nov 2, 2021 at 5:12 PM Emil Renner Berthing <kernel@esmil.dk> wrote:
> On the StarFive JH7100 RISC-V SoC the UART core clocks can't be set to
> exactly 16 * 115200Hz and many other common bitrates. Trying this will
> only result in a higher input clock, but low enough that the UART's
> internal divisor can't come close enough to the baud rate target.
> So rather than try to set the input clock it's better to skip the
> clk_set_rate call and rely solely on the UART's internal divisor.
>
> Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>

Thanks for your patch!

Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>

> --- a/drivers/tty/serial/8250/8250_dw.c
> +++ b/drivers/tty/serial/8250/8250_dw.c
> @@ -414,6 +414,8 @@ static void dw8250_quirks(struct uart_port *p, struct dw8250_data *data)
>
>                 if (of_device_is_compatible(np, "marvell,armada-38x-uart"))
>                         p->serial_out = dw8250_serial_out38x;
> +               if (of_device_is_compatible(np, "starfive,jh7100-uart"))
> +                       p->set_termios = dw8250_do_set_termios;

BTW, it would be great for a follow-up patch to get rid of
all these of_device_is_compatible() checks, and start using
dw8250_of_match[...].data instead.

>
>         } else if (acpi_dev_present("APMC0D08", NULL, -1)) {
>                 p->iotype = UPIO_MEM32;
> @@ -696,6 +698,7 @@ static const struct of_device_id dw8250_of_match[] = {
>         { .compatible = "cavium,octeon-3860-uart" },
>         { .compatible = "marvell,armada-38x-uart" },
>         { .compatible = "renesas,rzn1-uart" },
> +       { .compatible = "starfive,jh7100-uart" },
>         { /* Sentinel */ }
>  };

Gr{oetje,eeting}s,

                        Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds
diff mbox series

Patch

diff --git a/drivers/tty/serial/8250/8250_dw.c b/drivers/tty/serial/8250/8250_dw.c
index 53f57c3b9f42..1769808031c5 100644
--- a/drivers/tty/serial/8250/8250_dw.c
+++ b/drivers/tty/serial/8250/8250_dw.c
@@ -414,6 +414,8 @@  static void dw8250_quirks(struct uart_port *p, struct dw8250_data *data)
 
 		if (of_device_is_compatible(np, "marvell,armada-38x-uart"))
 			p->serial_out = dw8250_serial_out38x;
+		if (of_device_is_compatible(np, "starfive,jh7100-uart"))
+			p->set_termios = dw8250_do_set_termios;
 
 	} else if (acpi_dev_present("APMC0D08", NULL, -1)) {
 		p->iotype = UPIO_MEM32;
@@ -696,6 +698,7 @@  static const struct of_device_id dw8250_of_match[] = {
 	{ .compatible = "cavium,octeon-3860-uart" },
 	{ .compatible = "marvell,armada-38x-uart" },
 	{ .compatible = "renesas,rzn1-uart" },
+	{ .compatible = "starfive,jh7100-uart" },
 	{ /* Sentinel */ }
 };
 MODULE_DEVICE_TABLE(of, dw8250_of_match);