diff mbox series

[v3,15/16] RISC-V: Add initial StarFive JH7100 device tree

Message ID 20211102161125.1144023-16-kernel@esmil.dk (mailing list archive)
State New, archived
Headers show
Series Basic StarFive JH7100 RISC-V SoC support | expand

Commit Message

Emil Renner Berthing Nov. 2, 2021, 4:11 p.m. UTC
Add initial device tree for the JH7100 RISC-V SoC by StarFive Ltd. This
is a test chip for their upcoming JH7110 SoC.

The CPU and cache data is based on the device tree in the vendor u-boot
port.

Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
---
 arch/riscv/boot/dts/starfive/jh7100.dtsi | 230 +++++++++++++++++++++++
 1 file changed, 230 insertions(+)
 create mode 100644 arch/riscv/boot/dts/starfive/jh7100.dtsi
diff mbox series

Patch

diff --git a/arch/riscv/boot/dts/starfive/jh7100.dtsi b/arch/riscv/boot/dts/starfive/jh7100.dtsi
new file mode 100644
index 000000000000..69f22f9aad9d
--- /dev/null
+++ b/arch/riscv/boot/dts/starfive/jh7100.dtsi
@@ -0,0 +1,230 @@ 
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+/*
+ * Copyright (C) 2021 StarFive Technology Co., Ltd.
+ * Copyright (C) 2021 Emil Renner Berthing <kernel@esmil.dk>
+ */
+
+/dts-v1/;
+#include <dt-bindings/clock/starfive-jh7100.h>
+#include <dt-bindings/reset/starfive-jh7100.h>
+
+/ {
+	compatible = "starfive,jh7100";
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			compatible = "sifive,u74-mc", "riscv";
+			reg = <0>;
+			d-cache-block-size = <64>;
+			d-cache-sets = <64>;
+			d-cache-size = <32768>;
+			d-tlb-sets = <1>;
+			d-tlb-size = <32>;
+			device_type = "cpu";
+			i-cache-block-size = <64>;
+			i-cache-sets = <64>;
+			i-cache-size = <32768>;
+			i-tlb-sets = <1>;
+			i-tlb-size = <32>;
+			mmu-type = "riscv,sv39";
+			riscv,isa = "rv64imafdc";
+			tlb-split;
+
+			cpu0_intc: interrupt-controller {
+				compatible = "riscv,cpu-intc";
+				interrupt-controller;
+				#interrupt-cells = <1>;
+			};
+		};
+
+		cpu@1 {
+			compatible = "sifive,u74-mc", "riscv";
+			reg = <1>;
+			d-cache-block-size = <64>;
+			d-cache-sets = <64>;
+			d-cache-size = <32768>;
+			d-tlb-sets = <1>;
+			d-tlb-size = <32>;
+			device_type = "cpu";
+			i-cache-block-size = <64>;
+			i-cache-sets = <64>;
+			i-cache-size = <32768>;
+			i-tlb-sets = <1>;
+			i-tlb-size = <32>;
+			mmu-type = "riscv,sv39";
+			riscv,isa = "rv64imafdc";
+			tlb-split;
+
+			cpu1_intc: interrupt-controller {
+				compatible = "riscv,cpu-intc";
+				interrupt-controller;
+				#interrupt-cells = <1>;
+			};
+		};
+	};
+
+	osc_sys: osc_sys {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		/* This value must be overridden by the board */
+		clock-frequency = <0>;
+	};
+
+	osc_aud: osc_aud {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		/* This value must be overridden by the board */
+		clock-frequency = <0>;
+	};
+
+	gmac_rmii_ref: gmac_rmii_ref {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		/* Should be overridden by the board when needed */
+		clock-frequency = <0>;
+	};
+
+	gmac_gr_mii_rxclk: gmac_gr_mii_rxclk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		/* Should be overridden by the board when needed */
+		clock-frequency = <0>;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		interrupt-parent = <&plic>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		clint: clint@2000000 {
+			compatible = "starfive,jh7100-clint", "sifive,clint0";
+			reg = <0x0 0x2000000 0x0 0x10000>;
+			interrupts-extended = <&cpu0_intc 3 &cpu0_intc 7
+					       &cpu1_intc 3 &cpu1_intc 7>;
+		};
+
+		plic: interrupt-controller@c000000 {
+			compatible = "starfive,jh7100-plic", "sifive,plic-1.0.0";
+			reg = <0x0 0xc000000 0x0 0x4000000>;
+			interrupts-extended = <&cpu0_intc 11 &cpu0_intc 9
+					       &cpu1_intc 11 &cpu1_intc 9>;
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <1>;
+			riscv,ndev = <127>;
+		};
+
+		clkgen: clock-controller@11800000 {
+			compatible = "starfive,jh7100-clkgen";
+			reg = <0x0 0x11800000 0x0 0x10000>;
+			clocks = <&osc_sys>, <&osc_aud>, <&gmac_rmii_ref>, <&gmac_gr_mii_rxclk>;
+			clock-names = "osc_sys", "osc_aud", "gmac_rmii_ref", "gmac_gr_mii_rxclk";
+			#clock-cells = <1>;
+		};
+
+		rstgen: reset-controller@11840000 {
+			compatible = "starfive,jh7100-reset";
+			reg = <0x0 0x11840000 0x0 0x10000>;
+			#reset-cells = <1>;
+		};
+
+		i2c0: i2c@118b0000 {
+			compatible = "snps,designware-i2c";
+			reg = <0x0 0x118b0000 0x0 0x10000>;
+			clocks = <&clkgen JH7100_CLK_I2C0_CORE>,
+				 <&clkgen JH7100_CLK_I2C0_APB>;
+			clock-names = "ref", "pclk";
+			resets = <&rstgen JH7100_RSTN_I2C0_APB>;
+			interrupts = <96>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@118c0000 {
+			compatible = "snps,designware-i2c";
+			reg = <0x0 0x118c0000 0x0 0x10000>;
+			clocks = <&clkgen JH7100_CLK_I2C1_CORE>,
+				 <&clkgen JH7100_CLK_I2C1_APB>;
+			clock-names = "ref", "pclk";
+			resets = <&rstgen JH7100_RSTN_I2C1_APB>;
+			interrupts = <97>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		gpio: pinctrl@11910000 {
+			compatible = "starfive,jh7100-pinctrl";
+			reg = <0x0 0x11910000 0x0 0x10000>,
+			      <0x0 0x11858000 0x0 0x1000>;
+			reg-names = "gpio", "padctl";
+			clocks = <&clkgen JH7100_CLK_GPIO_APB>;
+			resets = <&rstgen JH7100_RSTN_GPIO_APB>;
+			interrupts = <32>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		uart2: serial@12430000 {
+			compatible = "starfive,jh7100-uart", "snps,dw-apb-uart";
+			reg = <0x0 0x12430000 0x0 0x10000>;
+			clocks = <&clkgen JH7100_CLK_UART2_CORE>,
+				 <&clkgen JH7100_CLK_UART2_APB>;
+			clock-names = "baudclk", "apb_pclk";
+			resets = <&rstgen JH7100_RSTN_UART2_APB>;
+			interrupts = <72>;
+			reg-io-width = <4>;
+			reg-shift = <2>;
+			status = "disabled";
+		};
+
+		uart3: serial@12440000 {
+			compatible = "starfive,jh7100-uart", "snps,dw-apb-uart";
+			reg = <0x0 0x12440000 0x0 0x10000>;
+			clocks = <&clkgen JH7100_CLK_UART3_CORE>,
+				 <&clkgen JH7100_CLK_UART3_APB>;
+			clock-names = "baudclk", "apb_pclk";
+			resets = <&rstgen JH7100_RSTN_UART3_APB>;
+			interrupts = <73>;
+			reg-io-width = <4>;
+			reg-shift = <2>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@12450000 {
+			compatible = "snps,designware-i2c";
+			reg = <0x0 0x12450000 0x0 0x10000>;
+			clocks = <&clkgen JH7100_CLK_I2C2_CORE>,
+				 <&clkgen JH7100_CLK_I2C2_APB>;
+			clock-names = "ref", "pclk";
+			resets = <&rstgen JH7100_RSTN_I2C2_APB>;
+			interrupts = <74>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c3: i2c@12460000 {
+			compatible = "snps,designware-i2c";
+			reg = <0x0 0x12460000 0x0 0x10000>;
+			clocks = <&clkgen JH7100_CLK_I2C3_CORE>,
+				 <&clkgen JH7100_CLK_I2C3_APB>;
+			clock-names = "ref", "pclk";
+			resets = <&rstgen JH7100_RSTN_I2C3_APB>;
+			interrupts = <75>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+	};
+};