diff mbox series

[1/1] riscv: default to CONFIG_RISCV_SBI_V01=n

Message ID 20211216123538.175087-1-heinrich.schuchardt@canonical.com (mailing list archive)
State New, archived
Headers show
Series [1/1] riscv: default to CONFIG_RISCV_SBI_V01=n | expand

Commit Message

Heinrich Schuchardt Dec. 16, 2021, 12:35 p.m. UTC
The SBI 0.1 specification is obsolete. The current version is 0.3.
Hence we should not rely by default on SBI 0.1 being implemented.

Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
---
 arch/riscv/Kconfig | 1 -
 1 file changed, 1 deletion(-)

Comments

Jessica Clarke Dec. 16, 2021, 1:49 p.m. UTC | #1
On 16 Dec 2021, at 12:35, Heinrich Schuchardt <heinrich.schuchardt@canonical.com> wrote:
> 
> The SBI 0.1 specification is obsolete. The current version is 0.3.
> Hence we should not rely by default on SBI 0.1 being implemented.

It’s what BBL implements, and some people are still using it,
especially given early hardware shipped before OpenSBI grew in
popularity.

Jess
Heinrich Schuchardt Dec. 16, 2021, 2:17 p.m. UTC | #2
On 12/16/21 14:49, Jessica Clarke wrote:
> On 16 Dec 2021, at 12:35, Heinrich Schuchardt <heinrich.schuchardt@canonical.com> wrote:
>>
>> The SBI 0.1 specification is obsolete. The current version is 0.3.
>> Hence we should not rely by default on SBI 0.1 being implemented.
> 
> It’s what BBL implements, and some people are still using it,
> especially given early hardware shipped before OpenSBI grew in
> popularity.
> 
> Jess
> 

Do you mean BBL is not developed anymore?

Some people may still be using a 0.1 SBI. But that minority stuck on an 
outdated software stack does not justify defaulting to deprecated 
settings in future Linux releases.

Best regards

Heinrich
Jessica Clarke Dec. 16, 2021, 4:51 p.m. UTC | #3
On 16 Dec 2021, at 14:17, Heinrich Schuchardt <heinrich.schuchardt@canonical.com> wrote:
> 
> On 12/16/21 14:49, Jessica Clarke wrote:
>> On 16 Dec 2021, at 12:35, Heinrich Schuchardt <heinrich.schuchardt@canonical.com> wrote:
>>> 
>>> The SBI 0.1 specification is obsolete. The current version is 0.3.
>>> Hence we should not rely by default on SBI 0.1 being implemented.
>> It’s what BBL implements, and some people are still using it,
>> especially given early hardware shipped before OpenSBI grew in
>> popularity.
>> Jess
> 
> Do you mean BBL is not developed anymore?
> 
> Some people may still be using a 0.1 SBI. But that minority stuck on an outdated software stack does not justify defaulting to deprecated settings in future Linux releases.

BBL is still actively maintained; its most recent commit was 24 days
ago. Also, the amount of code CONFIG_RISCV_SBI_V01 affects is tiny, so
I see no tangible benefit from making this change, just unnecessary
breakage of perfectly functional systems.

Jess
Heinrich Schuchardt Dec. 17, 2021, 10:42 a.m. UTC | #4
On 12/16/21 17:51, Jessica Clarke wrote:
> On 16 Dec 2021, at 14:17, Heinrich Schuchardt <heinrich.schuchardt@canonical.com> wrote:
>>
>> On 12/16/21 14:49, Jessica Clarke wrote:
>>> On 16 Dec 2021, at 12:35, Heinrich Schuchardt <heinrich.schuchardt@canonical.com> wrote:
>>>>
>>>> The SBI 0.1 specification is obsolete. The current version is 0.3.
>>>> Hence we should not rely by default on SBI 0.1 being implemented.
>>> It’s what BBL implements, and some people are still using it,
>>> especially given early hardware shipped before OpenSBI grew in
>>> popularity.
>>> Jess
>>
>> Do you mean BBL is not developed anymore?
>>
>> Some people may still be using a 0.1 SBI. But that minority stuck on an outdated software stack does not justify defaulting to deprecated settings in future Linux releases.
> 
> BBL is still actively maintained; its most recent commit was 24 days
> ago. Also, the amount of code CONFIG_RISCV_SBI_V01 affects is tiny, so
> I see no tangible benefit from making this change, just unnecessary
> breakage of perfectly functional systems.

Only the default is changed. How could this break any existing system?
You can still compile with the deprecated setting.

I can not see why we should keep a default that will cause issues on 
systems complying to the current SBI specification.

Best regards

Heinrich
Anup Patel Dec. 17, 2021, 12:09 p.m. UTC | #5
+Atish

On Fri, Dec 17, 2021 at 4:12 PM Heinrich Schuchardt
<heinrich.schuchardt@canonical.com> wrote:
>
>
>
> On 12/16/21 17:51, Jessica Clarke wrote:
> > On 16 Dec 2021, at 14:17, Heinrich Schuchardt <heinrich.schuchardt@canonical.com> wrote:
> >>
> >> On 12/16/21 14:49, Jessica Clarke wrote:
> >>> On 16 Dec 2021, at 12:35, Heinrich Schuchardt <heinrich.schuchardt@canonical.com> wrote:
> >>>>
> >>>> The SBI 0.1 specification is obsolete. The current version is 0.3.
> >>>> Hence we should not rely by default on SBI 0.1 being implemented.
> >>> It’s what BBL implements, and some people are still using it,
> >>> especially given early hardware shipped before OpenSBI grew in
> >>> popularity.
> >>> Jess
> >>
> >> Do you mean BBL is not developed anymore?
> >>
> >> Some people may still be using a 0.1 SBI. But that minority stuck on an outdated software stack does not justify defaulting to deprecated settings in future Linux releases.
> >
> > BBL is still actively maintained; its most recent commit was 24 days
> > ago. Also, the amount of code CONFIG_RISCV_SBI_V01 affects is tiny, so
> > I see no tangible benefit from making this change, just unnecessary
> > breakage of perfectly functional systems.
>
> Only the default is changed. How could this break any existing system?
> You can still compile with the deprecated setting.
>
> I can not see why we should keep a default that will cause issues on
> systems complying to the current SBI specification.

I agree with Heinrich.

Almost all SBI implementations (OpenSBI, EDK2, KVM, Xvisor, etc) are
providing at least SBI v0.2 and we can't endlessly wait for BBL to move
away from SBI v0.1. We can't totally remove SBI v0.1 but we should
at least disable it by default.

Same rationale applies to the spinwait CPU operations which are only
required for systems using BBL. The sparse HART id series from Atish
can include a patch to have spinwait CPU operations disabled by
default.

@Atish/Palmer, what do you think ?

Regards,
Anup
Palmer Dabbelt Dec. 17, 2021, 6:35 p.m. UTC | #6
On Fri, 17 Dec 2021 04:09:22 PST (-0800), anup@brainfault.org wrote:
> +Atish
>
> On Fri, Dec 17, 2021 at 4:12 PM Heinrich Schuchardt
> <heinrich.schuchardt@canonical.com> wrote:
>>
>>
>>
>> On 12/16/21 17:51, Jessica Clarke wrote:
>> > On 16 Dec 2021, at 14:17, Heinrich Schuchardt <heinrich.schuchardt@canonical.com> wrote:
>> >>
>> >> On 12/16/21 14:49, Jessica Clarke wrote:
>> >>> On 16 Dec 2021, at 12:35, Heinrich Schuchardt <heinrich.schuchardt@canonical.com> wrote:
>> >>>>
>> >>>> The SBI 0.1 specification is obsolete. The current version is 0.3.
>> >>>> Hence we should not rely by default on SBI 0.1 being implemented.
>> >>> It’s what BBL implements, and some people are still using it,
>> >>> especially given early hardware shipped before OpenSBI grew in
>> >>> popularity.
>> >>> Jess
>> >>
>> >> Do you mean BBL is not developed anymore?
>> >>
>> >> Some people may still be using a 0.1 SBI. But that minority stuck on an outdated software stack does not justify defaulting to deprecated settings in future Linux releases.
>> >
>> > BBL is still actively maintained; its most recent commit was 24 days
>> > ago. Also, the amount of code CONFIG_RISCV_SBI_V01 affects is tiny, so
>> > I see no tangible benefit from making this change, just unnecessary
>> > breakage of perfectly functional systems.
>>
>> Only the default is changed. How could this break any existing system?
>> You can still compile with the deprecated setting.
>>
>> I can not see why we should keep a default that will cause issues on
>> systems complying to the current SBI specification.
>
> I agree with Heinrich.
>
> Almost all SBI implementations (OpenSBI, EDK2, KVM, Xvisor, etc) are
> providing at least SBI v0.2 and we can't endlessly wait for BBL to move
> away from SBI v0.1. We can't totally remove SBI v0.1 but we should
> at least disable it by default.
>
> Same rationale applies to the spinwait CPU operations which are only
> required for systems using BBL. The sparse HART id series from Atish
> can include a patch to have spinwait CPU operations disabled by
> default.
>
> @Atish/Palmer, what do you think ?

I agree with Heinrich: it's just a defconfig change, we're not dropping 
support for SBI-0.1.  The defconfig is generally meant to reflect what 
kernel developers are using, and AFAIK everyone doing upstream 
development moved off the legacy SBI implementations as of a while ago.  
There's some cost associated with supporting the old SBI, it's not like 
this is just some backup calls we're adding.

If vendors are still shipping old firmwares as part of their SDKs that's 
fine, they'll just need to flip on support for it in their configs.  Who 
knows, maybe this will even be the nudge they need to stop shipping 
ancient firmware ;)
Palmer Dabbelt Jan. 20, 2022, 4:58 p.m. UTC | #7
On Thu, 16 Dec 2021 04:35:38 PST (-0800), heinrich.schuchardt@canonical.com wrote:
> The SBI 0.1 specification is obsolete. The current version is 0.3.
> Hence we should not rely by default on SBI 0.1 being implemented.
>
> Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
> ---
>  arch/riscv/Kconfig | 1 -
>  1 file changed, 1 deletion(-)
>
> diff --git a/arch/riscv/Kconfig b/arch/riscv/Kconfig
> index 09abf62ae0ad..f177ad3bee0f 100644
> --- a/arch/riscv/Kconfig
> +++ b/arch/riscv/Kconfig
> @@ -396,7 +396,6 @@ source "kernel/Kconfig.hz"
>
>  config RISCV_SBI_V01
>  	bool "SBI v0.1 support"
> -	default y
>  	depends on RISCV_SBI
>  	help
>  	  This config allows kernel to use SBI v0.1 APIs. This will be

Thanks, this is on for-next.
diff mbox series

Patch

diff --git a/arch/riscv/Kconfig b/arch/riscv/Kconfig
index 09abf62ae0ad..f177ad3bee0f 100644
--- a/arch/riscv/Kconfig
+++ b/arch/riscv/Kconfig
@@ -396,7 +396,6 @@  source "kernel/Kconfig.hz"
 
 config RISCV_SBI_V01
 	bool "SBI v0.1 support"
-	default y
 	depends on RISCV_SBI
 	help
 	  This config allows kernel to use SBI v0.1 APIs. This will be