diff mbox series

[v1,4/6] dt-bindings: mfd: convert da9063 to yaml

Message ID 20220605133300.376161-5-mail@conchuod.ie (mailing list archive)
State New, archived
Headers show
Series clear riscv dtbs_check errors | expand

Commit Message

Conor Dooley June 5, 2022, 1:32 p.m. UTC
From: Conor Dooley <conor.dooley@microchip.com>

Convert the dt binding for the da9063/da9063l to yaml.

Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
---
 .../devicetree/bindings/mfd/da9063.txt        | 111 ----------------
 .../devicetree/bindings/mfd/da9063.yaml       | 123 ++++++++++++++++++
 .../devicetree/bindings/trivial-devices.yaml  |   2 -
 3 files changed, 123 insertions(+), 113 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/mfd/da9063.txt
 create mode 100644 Documentation/devicetree/bindings/mfd/da9063.yaml

Comments

Krzysztof Kozlowski June 6, 2022, 1:11 p.m. UTC | #1
On 05/06/2022 15:32, mail@conchuod.ie wrote:
> From: Conor Dooley <conor.dooley@microchip.com>
> 
> Convert the dt binding for the da9063/da9063l to yaml.
> 
> Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
> ---
>  .../devicetree/bindings/mfd/da9063.txt        | 111 ----------------
>  .../devicetree/bindings/mfd/da9063.yaml       | 123 ++++++++++++++++++
>  .../devicetree/bindings/trivial-devices.yaml  |   2 -
>  3 files changed, 123 insertions(+), 113 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/mfd/da9063.txt
>  create mode 100644 Documentation/devicetree/bindings/mfd/da9063.yaml
> 
> diff --git a/Documentation/devicetree/bindings/mfd/da9063.txt b/Documentation/devicetree/bindings/mfd/da9063.txt
> deleted file mode 100644
> index 91b79a21d403..000000000000
> --- a/Documentation/devicetree/bindings/mfd/da9063.txt
> +++ /dev/null
> @@ -1,111 +0,0 @@
> -* Dialog DA9063/DA9063L Power Management Integrated Circuit (PMIC)
> -
> -DA9063 consists of a large and varied group of sub-devices (I2C Only):
> -
> -Device                   Supply Names    Description
> -------                   ------------    -----------
> -da9063-regulator        :               : LDOs & BUCKs
> -da9063-onkey            :               : On Key
> -da9063-rtc              :               : Real-Time Clock (DA9063 only)
> -da9063-watchdog         :               : Watchdog
> -
> -======
> -
> -Required properties:
> -
> -- compatible : Should be "dlg,da9063" or "dlg,da9063l"
> -- reg : Specifies the I2C slave address (this defaults to 0x58 but it can be
> -  modified to match the chip's OTP settings).
> -- interrupts : IRQ line information.
> -- interrupt-controller
> -
> -Sub-nodes:
> -
> -- regulators : This node defines the settings for the LDOs and BUCKs.
> -  The DA9063(L) regulators are bound using their names listed below:
> -
> -    bcore1    : BUCK CORE1
> -    bcore2    : BUCK CORE2
> -    bpro      : BUCK PRO
> -    bmem      : BUCK MEM
> -    bio       : BUCK IO
> -    bperi     : BUCK PERI
> -    ldo1      : LDO_1	(DA9063 only)
> -    ldo2      : LDO_2	(DA9063 only)
> -    ldo3      : LDO_3
> -    ldo4      : LDO_4	(DA9063 only)
> -    ldo5      : LDO_5	(DA9063 only)
> -    ldo6      : LDO_6	(DA9063 only)
> -    ldo7      : LDO_7
> -    ldo8      : LDO_8
> -    ldo9      : LDO_9
> -    ldo10     : LDO_10	(DA9063 only)
> -    ldo11     : LDO_11
> -
> -  The component follows the standard regulator framework and the bindings
> -  details of individual regulator device can be found in:
> -  Documentation/devicetree/bindings/regulator/regulator.txt
> -
> -- rtc : This node defines settings for the Real-Time Clock associated with
> -  the DA9063 only. The RTC is not present in DA9063L. There are currently
> -  no entries in this binding, however compatible = "dlg,da9063-rtc" should
> -  be added if a node is created.
> -
> -- onkey : This node defines the OnKey settings for controlling the key
> -  functionality of the device. The node should contain the compatible property
> -  with the value "dlg,da9063-onkey".
> -
> -  Optional onkey properties:
> -
> -  - dlg,disable-key-power : Disable power-down using a long key-press. If this
> -    entry exists the OnKey driver will remove support for the KEY_POWER key
> -    press. If this entry does not exist then by default the key-press
> -    triggered power down is enabled and the OnKey will support both KEY_POWER
> -    and KEY_SLEEP.
> -
> -- watchdog : This node defines settings for the Watchdog timer associated
> -  with the DA9063 and DA9063L. There are currently no entries in this
> -  binding, however compatible = "dlg,da9063-watchdog" should be added
> -  if a node is created.
> -
> -
> -Example:
> -
> -	pmic0: da9063@58 {
> -		compatible = "dlg,da9063"
> -		reg = <0x58>;
> -		interrupt-parent = <&gpio6>;
> -		interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
> -		interrupt-controller;
> -
> -		rtc {
> -			compatible = "dlg,da9063-rtc";
> -		};
> -
> -		wdt {
> -			compatible = "dlg,da9063-watchdog";
> -		};
> -
> -		onkey {
> -			compatible = "dlg,da9063-onkey";
> -			dlg,disable-key-power;
> -		};
> -
> -		regulators {
> -			DA9063_BCORE1: bcore1 {
> -				regulator-name = "BCORE1";
> -				regulator-min-microvolt = <300000>;
> -				regulator-max-microvolt = <1570000>;
> -				regulator-min-microamp = <500000>;
> -				regulator-max-microamp = <2000000>;
> -				regulator-boot-on;
> -			};
> -			DA9063_LDO11: ldo11 {
> -				regulator-name = "LDO_11";
> -				regulator-min-microvolt = <900000>;
> -				regulator-max-microvolt = <3600000>;
> -				regulator-boot-on;
> -			};
> -		};
> -	};
> -
> diff --git a/Documentation/devicetree/bindings/mfd/da9063.yaml b/Documentation/devicetree/bindings/mfd/da9063.yaml
> new file mode 100644
> index 000000000000..376880061f42
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mfd/da9063.yaml

dlg,da9063.yaml

> @@ -0,0 +1,123 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/mfd/da9063.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Dialog DA9063/DA9063L Power Management Integrated Circuit (PMIC)
> +
> +maintainers:
> +  - Steve Twiss <stwiss.opensource@diasemi.com>
> +
> +description: |
> +  For device-tree bindings of other sub-modules refer to the binding documents
> +  under the respective sub-system directories.
> +
> +properties:
> +  compatible:
> +    enum:
> +      - dlg,da9063
> +      - dlg,da9063l
> +
> +  reg:
> +    description:
> +      I2C device address.

Skip description.

> +    maxItems: 1
> +
> +  interrupts:
> +    maxItems: 1
> +
> +  interrupt-controller: true
> +
> +  "#interrupt-cells":
> +    const: 2
> +
> +  watchdog:
> +    type: object
> +    $ref: ../watchdog/watchdog.yaml#

1. full reference, so /schemas/watchdog/....
2. unevaluatedProperties:false

> +    properties:
> +      compatible:
> +        const: dlg,da9063-watchdog

> +
> +  rtc:
> +    type: object
> +    $ref: ../rtc/rtc.yaml#

Ditto

> +    properties:
> +      compatible:
> +        const: dlg,da9063-rtc
> +
> +  onkey:
> +    type: object
> +    $ref: ../input/input.yaml#

Ditto

> +    properties:
> +      compatible:
> +        const: dlg,da9063-onkey
> +
> +      dlg,disable-key-power:
> +        type: boolean
> +        description: |
> +          Disable power-down using a long key-press.
> +          If this entry does not exist then by default the key-press triggered
> +          power down is enabled and the OnKey will support both KEY_POWER and
> +          KEY_SLEEP.
> +
> +  regulators:
> +    type: object
> +    patternProperties:
> +      "^(ldo[1-11]|bcore[1-2]|bpro|bmem|bio|bperi)$":
> +        $ref: ../regulator/regulator.yaml

Ditto

> +
> +required:
> +  - compatible
> +  - reg
> +  - interrupts
> +  - interrupt-controller
> +
Best regards,
Krzysztof
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/mfd/da9063.txt b/Documentation/devicetree/bindings/mfd/da9063.txt
deleted file mode 100644
index 91b79a21d403..000000000000
--- a/Documentation/devicetree/bindings/mfd/da9063.txt
+++ /dev/null
@@ -1,111 +0,0 @@ 
-* Dialog DA9063/DA9063L Power Management Integrated Circuit (PMIC)
-
-DA9063 consists of a large and varied group of sub-devices (I2C Only):
-
-Device                   Supply Names    Description
-------                   ------------    -----------
-da9063-regulator        :               : LDOs & BUCKs
-da9063-onkey            :               : On Key
-da9063-rtc              :               : Real-Time Clock (DA9063 only)
-da9063-watchdog         :               : Watchdog
-
-======
-
-Required properties:
-
-- compatible : Should be "dlg,da9063" or "dlg,da9063l"
-- reg : Specifies the I2C slave address (this defaults to 0x58 but it can be
-  modified to match the chip's OTP settings).
-- interrupts : IRQ line information.
-- interrupt-controller
-
-Sub-nodes:
-
-- regulators : This node defines the settings for the LDOs and BUCKs.
-  The DA9063(L) regulators are bound using their names listed below:
-
-    bcore1    : BUCK CORE1
-    bcore2    : BUCK CORE2
-    bpro      : BUCK PRO
-    bmem      : BUCK MEM
-    bio       : BUCK IO
-    bperi     : BUCK PERI
-    ldo1      : LDO_1	(DA9063 only)
-    ldo2      : LDO_2	(DA9063 only)
-    ldo3      : LDO_3
-    ldo4      : LDO_4	(DA9063 only)
-    ldo5      : LDO_5	(DA9063 only)
-    ldo6      : LDO_6	(DA9063 only)
-    ldo7      : LDO_7
-    ldo8      : LDO_8
-    ldo9      : LDO_9
-    ldo10     : LDO_10	(DA9063 only)
-    ldo11     : LDO_11
-
-  The component follows the standard regulator framework and the bindings
-  details of individual regulator device can be found in:
-  Documentation/devicetree/bindings/regulator/regulator.txt
-
-- rtc : This node defines settings for the Real-Time Clock associated with
-  the DA9063 only. The RTC is not present in DA9063L. There are currently
-  no entries in this binding, however compatible = "dlg,da9063-rtc" should
-  be added if a node is created.
-
-- onkey : This node defines the OnKey settings for controlling the key
-  functionality of the device. The node should contain the compatible property
-  with the value "dlg,da9063-onkey".
-
-  Optional onkey properties:
-
-  - dlg,disable-key-power : Disable power-down using a long key-press. If this
-    entry exists the OnKey driver will remove support for the KEY_POWER key
-    press. If this entry does not exist then by default the key-press
-    triggered power down is enabled and the OnKey will support both KEY_POWER
-    and KEY_SLEEP.
-
-- watchdog : This node defines settings for the Watchdog timer associated
-  with the DA9063 and DA9063L. There are currently no entries in this
-  binding, however compatible = "dlg,da9063-watchdog" should be added
-  if a node is created.
-
-
-Example:
-
-	pmic0: da9063@58 {
-		compatible = "dlg,da9063"
-		reg = <0x58>;
-		interrupt-parent = <&gpio6>;
-		interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
-		interrupt-controller;
-
-		rtc {
-			compatible = "dlg,da9063-rtc";
-		};
-
-		wdt {
-			compatible = "dlg,da9063-watchdog";
-		};
-
-		onkey {
-			compatible = "dlg,da9063-onkey";
-			dlg,disable-key-power;
-		};
-
-		regulators {
-			DA9063_BCORE1: bcore1 {
-				regulator-name = "BCORE1";
-				regulator-min-microvolt = <300000>;
-				regulator-max-microvolt = <1570000>;
-				regulator-min-microamp = <500000>;
-				regulator-max-microamp = <2000000>;
-				regulator-boot-on;
-			};
-			DA9063_LDO11: ldo11 {
-				regulator-name = "LDO_11";
-				regulator-min-microvolt = <900000>;
-				regulator-max-microvolt = <3600000>;
-				regulator-boot-on;
-			};
-		};
-	};
-
diff --git a/Documentation/devicetree/bindings/mfd/da9063.yaml b/Documentation/devicetree/bindings/mfd/da9063.yaml
new file mode 100644
index 000000000000..376880061f42
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/da9063.yaml
@@ -0,0 +1,123 @@ 
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/da9063.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Dialog DA9063/DA9063L Power Management Integrated Circuit (PMIC)
+
+maintainers:
+  - Steve Twiss <stwiss.opensource@diasemi.com>
+
+description: |
+  For device-tree bindings of other sub-modules refer to the binding documents
+  under the respective sub-system directories.
+
+properties:
+  compatible:
+    enum:
+      - dlg,da9063
+      - dlg,da9063l
+
+  reg:
+    description:
+      I2C device address.
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-controller: true
+
+  "#interrupt-cells":
+    const: 2
+
+  watchdog:
+    type: object
+    $ref: ../watchdog/watchdog.yaml#
+    properties:
+      compatible:
+        const: dlg,da9063-watchdog
+
+  rtc:
+    type: object
+    $ref: ../rtc/rtc.yaml#
+    properties:
+      compatible:
+        const: dlg,da9063-rtc
+
+  onkey:
+    type: object
+    $ref: ../input/input.yaml#
+    properties:
+      compatible:
+        const: dlg,da9063-onkey
+
+      dlg,disable-key-power:
+        type: boolean
+        description: |
+          Disable power-down using a long key-press.
+          If this entry does not exist then by default the key-press triggered
+          power down is enabled and the OnKey will support both KEY_POWER and
+          KEY_SLEEP.
+
+  regulators:
+    type: object
+    patternProperties:
+      "^(ldo[1-11]|bcore[1-2]|bpro|bmem|bio|bperi)$":
+        $ref: ../regulator/regulator.yaml
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-controller
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      pmic@58 {
+        compatible = "dlg,da9063";
+        reg = <0x58>;
+        #interrupt-cells = <2>;
+        interrupt-parent = <&gpio6>;
+        interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+        interrupt-controller;
+
+        rtc {
+          compatible = "dlg,da9063-rtc";
+        };
+
+        watchdog {
+          compatible = "dlg,da9063-watchdog";
+        };
+
+        onkey {
+          compatible = "dlg,da9063-onkey";
+          dlg,disable-key-power;
+        };
+
+        regulators {
+          regulator-bcore1 {
+            regulator-name = "BCORE1";
+            regulator-min-microvolt = <300000>;
+            regulator-max-microvolt = <1570000>;
+            regulator-min-microamp = <500000>;
+            regulator-max-microamp = <2000000>;
+            regulator-boot-on;
+          };
+          regulator-ldo11 {
+            regulator-name = "LDO_11";
+            regulator-min-microvolt = <900000>;
+            regulator-max-microvolt = <3600000>;
+            regulator-boot-on;
+          };
+        };
+      };
+    };
+...
diff --git a/Documentation/devicetree/bindings/trivial-devices.yaml b/Documentation/devicetree/bindings/trivial-devices.yaml
index 6aafa71806a3..00acb9078cc0 100644
--- a/Documentation/devicetree/bindings/trivial-devices.yaml
+++ b/Documentation/devicetree/bindings/trivial-devices.yaml
@@ -93,8 +93,6 @@  properties:
           - dh,dhcom-board
             # DA9053: flexible system level PMIC with multicore support
           - dlg,da9053
-            # DA9063: system PMIC for quad-core application processors
-          - dlg,da9063
             # DMARD05: 3-axis I2C Accelerometer
           - domintech,dmard05
             # DMARD06: 3-axis I2C Accelerometer