diff mbox series

[24/36] printk: Remove trace_.*_rcuidle() usage

Message ID 20220608144517.444659212@infradead.org (mailing list archive)
State New, archived
Headers show
Series cpuidle,rcu: Cleanup the mess | expand

Commit Message

Peter Zijlstra June 8, 2022, 2:27 p.m. UTC
The problem, per commit fc98c3c8c9dc ("printk: use rcuidle console
tracepoint"), was printk usage from the cpuidle path where RCU was
already disabled.

Per the patches earlier in this series, this is no longer the case.

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
---
 kernel/printk/printk.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

Comments

Peter Zijlstra June 9, 2022, 10:02 a.m. UTC | #1
On Thu, Jun 09, 2022 at 11:16:46AM +0200, Petr Mladek wrote:
> On Wed 2022-06-08 16:27:47, Peter Zijlstra wrote:
> > The problem, per commit fc98c3c8c9dc ("printk: use rcuidle console
> > tracepoint"), was printk usage from the cpuidle path where RCU was
> > already disabled.
> > 
> > Per the patches earlier in this series, this is no longer the case.
> 
> My understanding is that this series reduces a lot the amount
> of code called with RCU disabled. As a result the particular printk()
> call mentioned by commit fc98c3c8c9dc ("printk: use rcuidle console
> tracepoint") is called with RCU enabled now. Hence this particular
> problem is fixed better way now.
> 
> But is this true in general?
> Does this "prevent" calling printk() a safe way in code with
> RCU disabled?

On x86_64, yes. Other architectures, less so.

Specifically, the objtool noinstr validation pass will warn at build
time (DEBUG_ENTRY=y) if any noinstr/cpuidle code does a call to
non-vetted code like printk().

At the same time; there's a few hacks that allow WARN to work, but
mostly if you hit WARN in entry/noinstr you get to keep the pieces in
any case.

On other architecture we'll need to rely on runtime coverage with
PROVE_RCU. That is, if a splat like in the above mentioned commit
happens again, we'll need to fix it by adjusting the callchain, not by
mucking about with RCU state.

> I am not sure if anyone cares. printk() is the best effort
> functionality because of the consoles code anyway. Also I wonder
> if anyone uses this trace_console().

This is the tracepoint used to spool all of printk into ftrace, I
suspect there's users, but I haven't used it myself.

> Therefore if this patch allows to remove some tricky tracing
> code then it might be worth it. But if trace_console_rcuidle()
> variant is still going to be available then I would keep using it.

My ultimate goal is to delete trace_.*_rcuidle() and RCU_NONIDLE()
entirely. We're close, but not quite there yet.
Sergey Senozhatsky June 9, 2022, 11:30 a.m. UTC | #2
My emails are getting rejected... Let me try web-interface

Kudos to Petr for the questions and thanks to PeterZ for the answers.

On Thu, Jun 9, 2022 at 7:02 PM Peter Zijlstra <peterz@infradead.org> wrote:
> This is the tracepoint used to spool all of printk into ftrace, I
> suspect there's users, but I haven't used it myself.

I'm somewhat curious whether we can actually remove that trace event.
Petr Mladek June 9, 2022, 1:02 p.m. UTC | #3
On Thu 2022-06-09 20:30:58, Sergey Senozhatsky wrote:
> My emails are getting rejected... Let me try web-interface

Bad day for mail sending. I have problems as well ;-)

> Kudos to Petr for the questions and thanks to PeterZ for the answers.
> 
> On Thu, Jun 9, 2022 at 7:02 PM Peter Zijlstra <peterz@infradead.org> wrote:
> > This is the tracepoint used to spool all of printk into ftrace, I
> > suspect there's users, but I haven't used it myself.
> 
> I'm somewhat curious whether we can actually remove that trace event.

Good question.

Well, I think that it might be useful. It allows to see trace and
printk messages together.

It was ugly when it was in the console code. The new location
in vprintk_store() allows to have it even "correctly" sorted
(timestamp) against other tracing messages.

Best Regards,
Petr
Petr Mladek June 9, 2022, 1:06 p.m. UTC | #4
On Thu 2022-06-09 12:02:04, Peter Zijlstra wrote:
> On Thu, Jun 09, 2022 at 11:16:46AM +0200, Petr Mladek wrote:
> > On Wed 2022-06-08 16:27:47, Peter Zijlstra wrote:
> > > The problem, per commit fc98c3c8c9dc ("printk: use rcuidle console
> > > tracepoint"), was printk usage from the cpuidle path where RCU was
> > > already disabled.
> > > 
> > Does this "prevent" calling printk() a safe way in code with
> > RCU disabled?
> 
> On x86_64, yes. Other architectures, less so.
> 
> Specifically, the objtool noinstr validation pass will warn at build
> time (DEBUG_ENTRY=y) if any noinstr/cpuidle code does a call to
> non-vetted code like printk().
> 
> At the same time; there's a few hacks that allow WARN to work, but
> mostly if you hit WARN in entry/noinstr you get to keep the pieces in
> any case.
> 
> On other architecture we'll need to rely on runtime coverage with
> PROVE_RCU. That is, if a splat like in the above mentioned commit
> happens again, we'll need to fix it by adjusting the callchain, not by
> mucking about with RCU state.

Makes sense. Feel free to use for this patch:

Acked-by: Petr Mladek <pmladek@suse.com>

> > Therefore if this patch allows to remove some tricky tracing
> > code then it might be worth it. But if trace_console_rcuidle()
> > variant is still going to be available then I would keep using it.
> 
> My ultimate goal is to delete trace_.*_rcuidle() and RCU_NONIDLE()
> entirely. We're close, but not quite there yet.

I keep my fingers crossed.

Best Regards,
Petr
Sergey Senozhatsky June 11, 2022, 2:23 a.m. UTC | #5
On Thu, Jun 9, 2022 at 10:06 PM Petr Mladek <pmladek@suse.com> wrote:
>
> Makes sense. Feel free to use for this patch:
>
> Acked-by: Petr Mladek <pmladek@suse.com>

Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Sergey Senozhatsky June 11, 2022, 2:33 a.m. UTC | #6
On Thu, Jun 9, 2022 at 10:02 PM Petr Mladek <pmladek@suse.com> wrote:
>
> On Thu 2022-06-09 20:30:58, Sergey Senozhatsky wrote:
> > My emails are getting rejected... Let me try web-interface
>
> Bad day for mail sending. I have problems as well ;-)

For me the problem is still there and apparently it's an "too many
recipients" error.

> > I'm somewhat curious whether we can actually remove that trace event.
>
> Good question.
>
> Well, I think that it might be useful. It allows to see trace and
> printk messages together.

Fair enough. Seems that back in 2011 people were pretty happy with it
https://lore.kernel.org/all/1322161388.5366.54.camel@jlt3.sipsolutions.net/T/#m7bf6416f469119372191f22a6ecf653c5f7331d2

but... reportedly, one of the folks who Ack-ed it (*cough cough*
PeterZ) has never used it.

> It was ugly when it was in the console code. The new location
> in vprintk_store() allows to have it even "correctly" sorted
> (timestamp) against other tracing messages.

That's true.
Steven Rostedt June 14, 2022, 2:37 p.m. UTC | #7
On Thu, 9 Jun 2022 15:02:20 +0200
Petr Mladek <pmladek@suse.com> wrote:

> > I'm somewhat curious whether we can actually remove that trace event.  
> 
> Good question.
> 
> Well, I think that it might be useful. It allows to see trace and
> printk messages together.

Yes people still use it. I was just asked about it at Kernel Recipes. That
is, someone wanted printk mixed in with the tracing, and I told them about
this event (which they didn't know about but was happy to hear that it
existed).

-- Steve
diff mbox series

Patch

--- a/kernel/printk/printk.c
+++ b/kernel/printk/printk.c
@@ -2238,7 +2238,7 @@  static u16 printk_sprint(char *text, u16
 		}
 	}
 
-	trace_console_rcuidle(text, text_len);
+	trace_console(text, text_len);
 
 	return text_len;
 }