diff mbox series

[3/3] riscv: dts: starfive: Add StarFive VisionFive V1 device tree

Message ID 20220901224253.2353071-4-cristian.ciocaltea@collabora.com (mailing list archive)
State Superseded
Headers show
Series Enable initial support for StarFive VisionFive V1 SBC | expand

Commit Message

Cristian Ciocaltea Sept. 1, 2022, 10:42 p.m. UTC
Add initial device tree for the StarFive VisionFive V1 SBC [1], which
is similar with the already supported BeagleV Starlight Beta board,
both being based on the StarFive JH7100 SoC.

[1] https://github.com/starfive-tech/VisionFive

Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
---
 arch/riscv/boot/dts/starfive/Makefile         |  2 +-
 .../jh7100-starfive-visionfive-v1.dts         | 20 +++++++++++++++++++
 2 files changed, 21 insertions(+), 1 deletion(-)
 create mode 100644 arch/riscv/boot/dts/starfive/jh7100-starfive-visionfive-v1.dts
diff mbox series

Patch

diff --git a/arch/riscv/boot/dts/starfive/Makefile b/arch/riscv/boot/dts/starfive/Makefile
index 0ea1bc15ab30..039c143cba33 100644
--- a/arch/riscv/boot/dts/starfive/Makefile
+++ b/arch/riscv/boot/dts/starfive/Makefile
@@ -1,2 +1,2 @@ 
 # SPDX-License-Identifier: GPL-2.0
-dtb-$(CONFIG_SOC_STARFIVE) += jh7100-beaglev-starlight.dtb
+dtb-$(CONFIG_SOC_STARFIVE) += jh7100-beaglev-starlight.dtb jh7100-starfive-visionfive-v1.dtb
diff --git a/arch/riscv/boot/dts/starfive/jh7100-starfive-visionfive-v1.dts b/arch/riscv/boot/dts/starfive/jh7100-starfive-visionfive-v1.dts
new file mode 100644
index 000000000000..e82af72f1aaf
--- /dev/null
+++ b/arch/riscv/boot/dts/starfive/jh7100-starfive-visionfive-v1.dts
@@ -0,0 +1,20 @@ 
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+/*
+ * Copyright (C) 2021 StarFive Technology Co., Ltd.
+ * Copyright (C) 2021 Emil Renner Berthing <kernel@esmil.dk>
+ */
+
+/dts-v1/;
+#include "jh7100-common.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "StarFive VisionFive V1";
+	compatible = "starfive,visionfive-v1", "starfive,jh7100";
+
+	gpio-restart {
+		compatible = "gpio-restart";
+		gpios = <&gpio 63 GPIO_ACTIVE_HIGH>;
+		priority = <224>;
+	};
+};