diff mbox series

[v14,3/8] genirq: Add mechanism to multiplex a single HW IPI

Message ID 20221201130135.1115380-4-apatel@ventanamicro.com (mailing list archive)
State Superseded
Headers show
Series RISC-V IPI Improvements | expand

Checks

Context Check Description
conchuod/tree_selection fail Guessing tree name failed

Commit Message

Anup Patel Dec. 1, 2022, 1:01 p.m. UTC
All RISC-V platforms have a single HW IPI provided by the INTC local
interrupt controller. The HW method to trigger INTC IPI can be through
external irqchip (e.g. RISC-V AIA), through platform specific device
(e.g. SiFive CLINT timer), or through firmware (e.g. SBI IPI call).

To support multiple IPIs on RISC-V, we add a generic IPI multiplexing
mechanism which help us create multiple virtual IPIs using a single
HW IPI. This generic IPI multiplexing is inspired from the Apple AIC
irqchip driver and it is shared by various RISC-V irqchip drivers.

Signed-off-by: Anup Patel <apatel@ventanamicro.com>
---
 include/linux/irq.h  |   3 +
 kernel/irq/Kconfig   |   5 ++
 kernel/irq/Makefile  |   1 +
 kernel/irq/ipi-mux.c | 199 +++++++++++++++++++++++++++++++++++++++++++
 4 files changed, 208 insertions(+)
 create mode 100644 kernel/irq/ipi-mux.c

Comments

Thomas Gleixner Dec. 1, 2022, 5:20 p.m. UTC | #1
On Thu, Dec 01 2022 at 18:31, Anup Patel wrote:
> All RISC-V platforms have a single HW IPI provided by the INTC local
> interrupt controller. The HW method to trigger INTC IPI can be through
> external irqchip (e.g. RISC-V AIA), through platform specific device
> (e.g. SiFive CLINT timer), or through firmware (e.g. SBI IPI call).
>
> To support multiple IPIs on RISC-V, we add a generic IPI multiplexing

s/we//

> mechanism which help us create multiple virtual IPIs using a single
> HW IPI. This generic IPI multiplexing is inspired from the Apple AIC

s/from/by/

> irqchip driver and it is shared by various RISC-V irqchip drivers.

Sure, but now we have two copies of this. One in the Apple AIC and one
here. The obvious thing to do is:

   1) Provide generic infrastructure

   2) Convert AIC to use it

   3) Add RISCV users

No?

> +static void ipi_mux_mask(struct irq_data *d)
> +{
> +	struct ipi_mux_cpu *icpu = this_cpu_ptr(ipi_mux_pcpu);
> +
> +	atomic_andnot(BIT(irqd_to_hwirq(d)), &icpu->enable);
> +}
> +
> +static void ipi_mux_unmask(struct irq_data *d)
> +{
> +	u32 ibit = BIT(irqd_to_hwirq(d));
> +	struct ipi_mux_cpu *icpu = this_cpu_ptr(ipi_mux_pcpu);

The AIC code got the variable ordering correct ...

https://www.kernel.org/doc/html/latest/process/maintainer-tip.html#variable-declarations

> +	atomic_or(ibit, &icpu->enable);
> +
> +	/*
> +	 * The atomic_or() above must complete before the atomic_read()
> +	 * below to avoid racing ipi_mux_send_mask().
> +	 */
> +	smp_mb__after_atomic();
> +
> +	/* If a pending IPI was unmasked, raise a parent IPI immediately. */
> +	if (atomic_read(&icpu->bits) & ibit)
> +		ipi_mux_send(smp_processor_id());
> +}
> +
> +static void ipi_mux_send_mask(struct irq_data *d, const struct cpumask *mask)
> +{
> +	u32 ibit = BIT(irqd_to_hwirq(d));
> +	struct ipi_mux_cpu *icpu = this_cpu_ptr(ipi_mux_pcpu);
> +	unsigned long pending;
> +	int cpu;
> +
> +	for_each_cpu(cpu, mask) {
> +		icpu = per_cpu_ptr(ipi_mux_pcpu, cpu);
> +		pending = atomic_fetch_or_release(ibit, &icpu->bits);
> +
> +		/*
> +		 * The atomic_fetch_or_release() above must complete
> +		 * before the atomic_read() below to avoid racing with
> +		 * ipi_mux_unmask().
> +		 */
> +		smp_mb__after_atomic();
> +
> +		/*
> +		 * The flag writes must complete before the physical IPI is
> +		 * issued to another CPU. This is implied by the control
> +		 * dependency on the result of atomic_read() below, which is
> +		 * itself already ordered after the vIPI flag write.
> +		 */
> +		if (!(pending & ibit) && (atomic_read(&icpu->enable) & ibit))
> +			ipi_mux_send(cpu);
> +	}
> +}
> +
> +static const struct irq_chip ipi_mux_chip = {
> +	.name		= "IPI Mux",
> +	.irq_mask	= ipi_mux_mask,
> +	.irq_unmask	= ipi_mux_unmask,
> +	.ipi_send_mask	= ipi_mux_send_mask,
> +};
> +
> +static int ipi_mux_domain_alloc(struct irq_domain *d, unsigned int virq,
> +				unsigned int nr_irqs, void *arg)
> +{
> +	int i;
> +
> +	for (i = 0; i < nr_irqs; i++) {
> +		irq_set_percpu_devid(virq + i);
> +		irq_domain_set_info(d, virq + i, i, &ipi_mux_chip, NULL,
> +				    handle_percpu_devid_irq, NULL, NULL);
> +	}
> +
> +	return 0;
> +}
> +
> +static const struct irq_domain_ops ipi_mux_domain_ops = {
> +	.alloc		= ipi_mux_domain_alloc,
> +	.free		= irq_domain_free_irqs_top,
> +};
> +
> +/**
> + * ipi_mux_process - Process multiplexed virtual IPIs
> + */
> +void ipi_mux_process(void)
> +{
> +	struct ipi_mux_cpu *icpu = this_cpu_ptr(ipi_mux_pcpu);
> +	irq_hw_number_t hwirq;
> +	unsigned long ipis;
> +	unsigned int en;
> +
> +	/*
> +	 * Reading enable mask does not need to be ordered as long as
> +	 * this function called from interrupt handler because only
> +	 * the CPU itself can change it's own enable mask.
> +	 */
> +	en = atomic_read(&icpu->enable);
> +
> +	/*
> +	 * Clear the IPIs we are about to handle. This pairs with the
> +	 * atomic_fetch_or_release() in ipi_mux_send_mask().

The comments in the AIC code where you copied from are definitely
better...

Thanks,

        tglx
Anup Patel Dec. 1, 2022, 6 p.m. UTC | #2
On Thu, Dec 1, 2022 at 10:50 PM Thomas Gleixner <tglx@linutronix.de> wrote:
>
> On Thu, Dec 01 2022 at 18:31, Anup Patel wrote:
> > All RISC-V platforms have a single HW IPI provided by the INTC local
> > interrupt controller. The HW method to trigger INTC IPI can be through
> > external irqchip (e.g. RISC-V AIA), through platform specific device
> > (e.g. SiFive CLINT timer), or through firmware (e.g. SBI IPI call).
> >
> > To support multiple IPIs on RISC-V, we add a generic IPI multiplexing
>
> s/we//

Okay, I will update.

>
> > mechanism which help us create multiple virtual IPIs using a single
> > HW IPI. This generic IPI multiplexing is inspired from the Apple AIC
>
> s/from/by/

Okay, I will update.

>
> > irqchip driver and it is shared by various RISC-V irqchip drivers.
>
> Sure, but now we have two copies of this. One in the Apple AIC and one
> here. The obvious thing to do is:
>
>    1) Provide generic infrastructure
>
>    2) Convert AIC to use it

Mark Z already has a converted version of AIC driver.
https://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms.git/log/?h=irq/ipi-mux

>
>    3) Add RISCV users

The PATCH4 of this series converts the two existing
RISC-V users (SBI IPI and CLINT).

We also have a RISC-V AIA series (posted recently) which
uses the IPI muxing added by this series.

>
> No?
>
> > +static void ipi_mux_mask(struct irq_data *d)
> > +{
> > +     struct ipi_mux_cpu *icpu = this_cpu_ptr(ipi_mux_pcpu);
> > +
> > +     atomic_andnot(BIT(irqd_to_hwirq(d)), &icpu->enable);
> > +}
> > +
> > +static void ipi_mux_unmask(struct irq_data *d)
> > +{
> > +     u32 ibit = BIT(irqd_to_hwirq(d));
> > +     struct ipi_mux_cpu *icpu = this_cpu_ptr(ipi_mux_pcpu);
>
> The AIC code got the variable ordering correct ...
>
> https://www.kernel.org/doc/html/latest/process/maintainer-tip.html#variable-declarations

Okay, I will update.

>
> > +     atomic_or(ibit, &icpu->enable);
> > +
> > +     /*
> > +      * The atomic_or() above must complete before the atomic_read()
> > +      * below to avoid racing ipi_mux_send_mask().
> > +      */
> > +     smp_mb__after_atomic();
> > +
> > +     /* If a pending IPI was unmasked, raise a parent IPI immediately. */
> > +     if (atomic_read(&icpu->bits) & ibit)
> > +             ipi_mux_send(smp_processor_id());
> > +}
> > +
> > +static void ipi_mux_send_mask(struct irq_data *d, const struct cpumask *mask)
> > +{
> > +     u32 ibit = BIT(irqd_to_hwirq(d));
> > +     struct ipi_mux_cpu *icpu = this_cpu_ptr(ipi_mux_pcpu);
> > +     unsigned long pending;
> > +     int cpu;
> > +
> > +     for_each_cpu(cpu, mask) {
> > +             icpu = per_cpu_ptr(ipi_mux_pcpu, cpu);
> > +             pending = atomic_fetch_or_release(ibit, &icpu->bits);
> > +
> > +             /*
> > +              * The atomic_fetch_or_release() above must complete
> > +              * before the atomic_read() below to avoid racing with
> > +              * ipi_mux_unmask().
> > +              */
> > +             smp_mb__after_atomic();
> > +
> > +             /*
> > +              * The flag writes must complete before the physical IPI is
> > +              * issued to another CPU. This is implied by the control
> > +              * dependency on the result of atomic_read() below, which is
> > +              * itself already ordered after the vIPI flag write.
> > +              */
> > +             if (!(pending & ibit) && (atomic_read(&icpu->enable) & ibit))
> > +                     ipi_mux_send(cpu);
> > +     }
> > +}
> > +
> > +static const struct irq_chip ipi_mux_chip = {
> > +     .name           = "IPI Mux",
> > +     .irq_mask       = ipi_mux_mask,
> > +     .irq_unmask     = ipi_mux_unmask,
> > +     .ipi_send_mask  = ipi_mux_send_mask,
> > +};
> > +
> > +static int ipi_mux_domain_alloc(struct irq_domain *d, unsigned int virq,
> > +                             unsigned int nr_irqs, void *arg)
> > +{
> > +     int i;
> > +
> > +     for (i = 0; i < nr_irqs; i++) {
> > +             irq_set_percpu_devid(virq + i);
> > +             irq_domain_set_info(d, virq + i, i, &ipi_mux_chip, NULL,
> > +                                 handle_percpu_devid_irq, NULL, NULL);
> > +     }
> > +
> > +     return 0;
> > +}
> > +
> > +static const struct irq_domain_ops ipi_mux_domain_ops = {
> > +     .alloc          = ipi_mux_domain_alloc,
> > +     .free           = irq_domain_free_irqs_top,
> > +};
> > +
> > +/**
> > + * ipi_mux_process - Process multiplexed virtual IPIs
> > + */
> > +void ipi_mux_process(void)
> > +{
> > +     struct ipi_mux_cpu *icpu = this_cpu_ptr(ipi_mux_pcpu);
> > +     irq_hw_number_t hwirq;
> > +     unsigned long ipis;
> > +     unsigned int en;
> > +
> > +     /*
> > +      * Reading enable mask does not need to be ordered as long as
> > +      * this function called from interrupt handler because only
> > +      * the CPU itself can change it's own enable mask.
> > +      */
> > +     en = atomic_read(&icpu->enable);
> > +
> > +     /*
> > +      * Clear the IPIs we are about to handle. This pairs with the
> > +      * atomic_fetch_or_release() in ipi_mux_send_mask().
>
> The comments in the AIC code where you copied from are definitely
> better...
>
> Thanks,
>
>         tglx

Regards,
Anup
Thomas Gleixner Dec. 2, 2022, 2:09 a.m. UTC | #3
Anup!

On Thu, Dec 01 2022 at 23:30, Anup Patel wrote:
> On Thu, Dec 1, 2022 at 10:50 PM Thomas Gleixner <tglx@linutronix.de> wrote:
>> > irqchip driver and it is shared by various RISC-V irqchip drivers.
>>
>> Sure, but now we have two copies of this. One in the Apple AIC and one
>> here. The obvious thing to do is:
>>
>>    1) Provide generic infrastructure
>>
>>    2) Convert AIC to use it
>
> Mark Z already has a converted version of AIC driver.
> https://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms.git/log/?h=irq/ipi-mux

You are submitting generic infrastructure which is supposed to go
through the relevant maintainer tree and not be funneled through some
riscv branch.

So obviously this very maintainer asks the predictable question and also
wants to see the Acked/Tested-by of the folks who maintain apple-AIC.

How is that supposed to work without integrating this patch into your
series and without having the apple-AIC folks on cc?

You did not start kernel development as of yesterday, right?

Thanks,

        tglx
Anup Patel Dec. 2, 2022, 5:04 a.m. UTC | #4
On Fri, Dec 2, 2022 at 7:39 AM Thomas Gleixner <tglx@linutronix.de> wrote:
>
> Anup!
>
> On Thu, Dec 01 2022 at 23:30, Anup Patel wrote:
> > On Thu, Dec 1, 2022 at 10:50 PM Thomas Gleixner <tglx@linutronix.de> wrote:
> >> > irqchip driver and it is shared by various RISC-V irqchip drivers.
> >>
> >> Sure, but now we have two copies of this. One in the Apple AIC and one
> >> here. The obvious thing to do is:
> >>
> >>    1) Provide generic infrastructure
> >>
> >>    2) Convert AIC to use it
> >
> > Mark Z already has a converted version of AIC driver.
> > https://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms.git/log/?h=irq/ipi-mux
>
> You are submitting generic infrastructure which is supposed to go
> through the relevant maintainer tree and not be funneled through some
> riscv branch.
>
> So obviously this very maintainer asks the predictable question and also
> wants to see the Acked/Tested-by of the folks who maintain apple-AIC.

Not CCing apple-AIC maintainers was purely accidental.

Actually, I had started off ipi-mux with the intent to share across
RISC-V irqchip drivers. Only in recent patch revisions (based on
suggestion from Marc Z), I tried to converge and make it useful
for apple-AIC driver as well. Unfortunately, I don't have apple HW
for testing this so I was hoping someone will help.

Thanks to Marc Z, we now have a patch for apple-AIC driver as well.

>
> How is that supposed to work without integrating this patch into your
> series and without having the apple-AIC folks on cc?

Okay, I will include the apple-AIC patch from Marc Z in the next revision
and add apple-AIC folks in CC.

>
> You did not start kernel development as of yesterday, right?
>
> Thanks,
>
>         tglx

Regards,
Anup
diff mbox series

Patch

diff --git a/include/linux/irq.h b/include/linux/irq.h
index c3eb89606c2b..b1b28affb32a 100644
--- a/include/linux/irq.h
+++ b/include/linux/irq.h
@@ -1266,6 +1266,9 @@  int __ipi_send_mask(struct irq_desc *desc, const struct cpumask *dest);
 int ipi_send_single(unsigned int virq, unsigned int cpu);
 int ipi_send_mask(unsigned int virq, const struct cpumask *dest);
 
+void ipi_mux_process(void);
+int ipi_mux_create(unsigned int nr_ipi, void (*mux_send)(unsigned int cpu));
+
 #ifdef CONFIG_GENERIC_IRQ_MULTI_HANDLER
 /*
  * Registers a generic IRQ handling function as the top-level IRQ handler in
diff --git a/kernel/irq/Kconfig b/kernel/irq/Kconfig
index db3d174c53d4..df17dbc54b02 100644
--- a/kernel/irq/Kconfig
+++ b/kernel/irq/Kconfig
@@ -86,6 +86,11 @@  config GENERIC_IRQ_IPI
 	depends on SMP
 	select IRQ_DOMAIN_HIERARCHY
 
+# Generic IRQ IPI Mux support
+config GENERIC_IRQ_IPI_MUX
+	bool
+	depends on SMP
+
 # Generic MSI interrupt support
 config GENERIC_MSI_IRQ
 	bool
diff --git a/kernel/irq/Makefile b/kernel/irq/Makefile
index b4f53717d143..f19d3080bf11 100644
--- a/kernel/irq/Makefile
+++ b/kernel/irq/Makefile
@@ -15,6 +15,7 @@  obj-$(CONFIG_GENERIC_IRQ_MIGRATION) += cpuhotplug.o
 obj-$(CONFIG_PM_SLEEP) += pm.o
 obj-$(CONFIG_GENERIC_MSI_IRQ) += msi.o
 obj-$(CONFIG_GENERIC_IRQ_IPI) += ipi.o
+obj-$(CONFIG_GENERIC_IRQ_IPI_MUX) += ipi-mux.o
 obj-$(CONFIG_SMP) += affinity.o
 obj-$(CONFIG_GENERIC_IRQ_DEBUGFS) += debugfs.o
 obj-$(CONFIG_GENERIC_IRQ_MATRIX_ALLOCATOR) += matrix.o
diff --git a/kernel/irq/ipi-mux.c b/kernel/irq/ipi-mux.c
new file mode 100644
index 000000000000..1a6ba19b736c
--- /dev/null
+++ b/kernel/irq/ipi-mux.c
@@ -0,0 +1,199 @@ 
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Multiplex several virtual IPIs over a single HW IPI.
+ *
+ * Copyright The Asahi Linux Contributors
+ * Copyright (c) 2022 Ventana Micro Systems Inc.
+ */
+
+#define pr_fmt(fmt) "ipi-mux: " fmt
+#include <linux/cpu.h>
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/irqchip.h>
+#include <linux/irqchip/chained_irq.h>
+#include <linux/irqdomain.h>
+#include <linux/jump_label.h>
+#include <linux/percpu.h>
+#include <linux/smp.h>
+
+struct ipi_mux_cpu {
+	atomic_t			enable;
+	atomic_t			bits;
+};
+
+static struct ipi_mux_cpu __percpu *ipi_mux_pcpu;
+static struct irq_domain *ipi_mux_domain;
+static void (*ipi_mux_send)(unsigned int cpu);
+
+static void ipi_mux_mask(struct irq_data *d)
+{
+	struct ipi_mux_cpu *icpu = this_cpu_ptr(ipi_mux_pcpu);
+
+	atomic_andnot(BIT(irqd_to_hwirq(d)), &icpu->enable);
+}
+
+static void ipi_mux_unmask(struct irq_data *d)
+{
+	u32 ibit = BIT(irqd_to_hwirq(d));
+	struct ipi_mux_cpu *icpu = this_cpu_ptr(ipi_mux_pcpu);
+
+	atomic_or(ibit, &icpu->enable);
+
+	/*
+	 * The atomic_or() above must complete before the atomic_read()
+	 * below to avoid racing ipi_mux_send_mask().
+	 */
+	smp_mb__after_atomic();
+
+	/* If a pending IPI was unmasked, raise a parent IPI immediately. */
+	if (atomic_read(&icpu->bits) & ibit)
+		ipi_mux_send(smp_processor_id());
+}
+
+static void ipi_mux_send_mask(struct irq_data *d, const struct cpumask *mask)
+{
+	u32 ibit = BIT(irqd_to_hwirq(d));
+	struct ipi_mux_cpu *icpu = this_cpu_ptr(ipi_mux_pcpu);
+	unsigned long pending;
+	int cpu;
+
+	for_each_cpu(cpu, mask) {
+		icpu = per_cpu_ptr(ipi_mux_pcpu, cpu);
+		pending = atomic_fetch_or_release(ibit, &icpu->bits);
+
+		/*
+		 * The atomic_fetch_or_release() above must complete
+		 * before the atomic_read() below to avoid racing with
+		 * ipi_mux_unmask().
+		 */
+		smp_mb__after_atomic();
+
+		/*
+		 * The flag writes must complete before the physical IPI is
+		 * issued to another CPU. This is implied by the control
+		 * dependency on the result of atomic_read() below, which is
+		 * itself already ordered after the vIPI flag write.
+		 */
+		if (!(pending & ibit) && (atomic_read(&icpu->enable) & ibit))
+			ipi_mux_send(cpu);
+	}
+}
+
+static const struct irq_chip ipi_mux_chip = {
+	.name		= "IPI Mux",
+	.irq_mask	= ipi_mux_mask,
+	.irq_unmask	= ipi_mux_unmask,
+	.ipi_send_mask	= ipi_mux_send_mask,
+};
+
+static int ipi_mux_domain_alloc(struct irq_domain *d, unsigned int virq,
+				unsigned int nr_irqs, void *arg)
+{
+	int i;
+
+	for (i = 0; i < nr_irqs; i++) {
+		irq_set_percpu_devid(virq + i);
+		irq_domain_set_info(d, virq + i, i, &ipi_mux_chip, NULL,
+				    handle_percpu_devid_irq, NULL, NULL);
+	}
+
+	return 0;
+}
+
+static const struct irq_domain_ops ipi_mux_domain_ops = {
+	.alloc		= ipi_mux_domain_alloc,
+	.free		= irq_domain_free_irqs_top,
+};
+
+/**
+ * ipi_mux_process - Process multiplexed virtual IPIs
+ */
+void ipi_mux_process(void)
+{
+	struct ipi_mux_cpu *icpu = this_cpu_ptr(ipi_mux_pcpu);
+	irq_hw_number_t hwirq;
+	unsigned long ipis;
+	unsigned int en;
+
+	/*
+	 * Reading enable mask does not need to be ordered as long as
+	 * this function called from interrupt handler because only
+	 * the CPU itself can change it's own enable mask.
+	 */
+	en = atomic_read(&icpu->enable);
+
+	/*
+	 * Clear the IPIs we are about to handle. This pairs with the
+	 * atomic_fetch_or_release() in ipi_mux_send_mask().
+	 */
+	ipis = atomic_fetch_andnot(en, &icpu->bits) & en;
+
+	for_each_set_bit(hwirq, &ipis, BITS_PER_TYPE(int))
+		generic_handle_domain_irq(ipi_mux_domain, hwirq);
+}
+
+/**
+ * ipi_mux_create - Create virtual IPIs multiplexed on top of a single
+ * parent IPI.
+ * @nr_ipi:		number of virtual IPIs to create. This should
+ *			be <= BITS_PER_TYPE(int)
+ * @mux_send:		callback to trigger parent IPI for a particular CPU
+ *
+ * Returns first virq of the newly created virtual IPIs upon success
+ * or <=0 upon failure
+ */
+int ipi_mux_create(unsigned int nr_ipi, void (*mux_send)(unsigned int cpu))
+{
+	struct fwnode_handle *fwnode;
+	struct irq_domain *domain;
+	int rc;
+
+	if (ipi_mux_domain)
+		return -EEXIST;
+
+	if (BITS_PER_TYPE(int) < nr_ipi || !mux_send)
+		return -EINVAL;
+
+	ipi_mux_pcpu = alloc_percpu(typeof(*ipi_mux_pcpu));
+	if (!ipi_mux_pcpu)
+		return -ENOMEM;
+
+	fwnode = irq_domain_alloc_named_fwnode("IPI-Mux");
+	if (!fwnode) {
+		pr_err("unable to create IPI Mux fwnode\n");
+		rc = -ENOMEM;
+		goto fail_free_cpu;
+	}
+
+	domain = irq_domain_create_linear(fwnode, nr_ipi,
+					  &ipi_mux_domain_ops, NULL);
+	if (!domain) {
+		pr_err("unable to add IPI Mux domain\n");
+		rc = -ENOMEM;
+		goto fail_free_fwnode;
+	}
+
+	domain->flags |= IRQ_DOMAIN_FLAG_IPI_SINGLE;
+	irq_domain_update_bus_token(domain, DOMAIN_BUS_IPI);
+
+	rc = __irq_domain_alloc_irqs(domain, -1, nr_ipi,
+				     NUMA_NO_NODE, NULL, false, NULL);
+	if (rc <= 0) {
+		pr_err("unable to alloc IRQs from IPI Mux domain\n");
+		goto fail_free_domain;
+	}
+
+	ipi_mux_domain = domain;
+	ipi_mux_send = mux_send;
+
+	return rc;
+
+fail_free_domain:
+	irq_domain_remove(domain);
+fail_free_fwnode:
+	irq_domain_free_fwnode(fwnode);
+fail_free_cpu:
+	free_percpu(ipi_mux_pcpu);
+	return rc;
+}