diff mbox series

[v2,2/3] drivers: watchdog: Add StarFive Watchdog driver

Message ID 20221219094233.179153-3-xingyu.wu@starfivetech.com (mailing list archive)
State Not Applicable
Headers show
Series Add watchdog driver for StarFive JH7110 RISC-V SoC | expand

Checks

Context Check Description
conchuod/tree_selection fail Guessing tree name failed

Commit Message

Xingyu Wu Dec. 19, 2022, 9:42 a.m. UTC
Add watchdog driver for the StarFive JH7110 SoC.

Signed-off-by: Xingyu Wu <xingyu.wu@starfivetech.com>
---
 MAINTAINERS                     |   7 +
 drivers/watchdog/Kconfig        |  11 +
 drivers/watchdog/Makefile       |   3 +
 drivers/watchdog/starfive-wdt.c | 720 ++++++++++++++++++++++++++++++++
 4 files changed, 741 insertions(+)
 create mode 100644 drivers/watchdog/starfive-wdt.c

Comments

Xingyu Wu Jan. 17, 2023, 6:35 a.m. UTC | #1
On 2022/12/19 17:42, Xingyu Wu wrote:
> Add watchdog driver for the StarFive JH7110 SoC.
> 
> Signed-off-by: Xingyu Wu <xingyu.wu@starfivetech.com>
> ---
>  MAINTAINERS                     |   7 +
>  drivers/watchdog/Kconfig        |  11 +
>  drivers/watchdog/Makefile       |   3 +
>  drivers/watchdog/starfive-wdt.c | 720 ++++++++++++++++++++++++++++++++
>  4 files changed, 741 insertions(+)
>  create mode 100644 drivers/watchdog/starfive-wdt.c
> 
> diff --git a/MAINTAINERS b/MAINTAINERS
> index a70c1d0f303e..9c1758e7d034 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -19623,6 +19623,13 @@ F:	Documentation/devicetree/bindings/reset/starfive,jh7100-reset.yaml
>  F:	drivers/reset/starfive/
>  F:	include/dt-bindings/reset/starfive*
>  
> +STARFIVE JH7110 WATCHDOG DRIVER
> +M:	Xingyu Wu <xingyu.wu@starfivetech.com>
> +M:	Samin Guo <samin.guo@starfivetech.com>
> +S:	Supported
> +F:	Documentation/devicetree/bindings/watchdog/starfive*
> +F:	drivers/watchdog/starfive-wdt.c
> +
>  STATIC BRANCH/CALL
>  M:	Peter Zijlstra <peterz@infradead.org>
>  M:	Josh Poimboeuf <jpoimboe@kernel.org>
> diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
> index b64bc49c7f30..8eeb0e23e98d 100644
> --- a/drivers/watchdog/Kconfig
> +++ b/drivers/watchdog/Kconfig
> @@ -2082,6 +2082,17 @@ config UML_WATCHDOG
>  	tristate "UML watchdog"
>  	depends on UML || COMPILE_TEST
>  
> +# RISCV Architecture
> +
> +config STARFIVE_WATCHDOG
> +	tristate "StarFive Watchdog support"
> +	depends on RISCV
> +	select WATCHDOG_CORE
> +	default SOC_STARFIVE
> +	help
> +	  Say Y here to support the watchdog of StarFive JH7110 SoC.
> +	  This driver can also be built as a module if choose M.
> +
>  #
>  # ISA-based Watchdog Cards
>  #
> diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile
> index d41e5f830ae7..9c22f1a43d5c 100644
> --- a/drivers/watchdog/Makefile
> +++ b/drivers/watchdog/Makefile
> @@ -210,6 +210,9 @@ obj-$(CONFIG_WATCHDOG_SUN4V)		+= sun4v_wdt.o
>  # Xen
>  obj-$(CONFIG_XEN_WDT) += xen_wdt.o
>  
> +# RISCV Architecture
> +obj-$(CONFIG_STARFIVE_WATCHDOG) += starfive-wdt.o
> +
>  # Architecture Independent
>  obj-$(CONFIG_BD957XMUF_WATCHDOG) += bd9576_wdt.o
>  obj-$(CONFIG_DA9052_WATCHDOG) += da9052_wdt.o
> diff --git a/drivers/watchdog/starfive-wdt.c b/drivers/watchdog/starfive-wdt.c
> new file mode 100644
> index 000000000000..d7fad0a2207c
> --- /dev/null
> +++ b/drivers/watchdog/starfive-wdt.c
> @@ -0,0 +1,720 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Starfive Watchdog driver
> + *
> + * Copyright (C) 2022 StarFive Technology Co., Ltd.
> + */
> +
> +#include <linux/clk.h>
> +#include <linux/delay.h>
> +#include <linux/err.h>
> +#include <linux/interrupt.h>
> +#include <linux/io.h>
> +#include <linux/iopoll.h>
> +#include <linux/module.h>
> +#include <linux/moduleparam.h>
> +#include <linux/of.h>
> +#include <linux/of_device.h>
> +#include <linux/platform_device.h>
> +#include <linux/pm_runtime.h>
> +#include <linux/reset.h>
> +#include <linux/reset-controller.h>
> +#include <linux/slab.h>
> +#include <linux/timer.h>
> +#include <linux/types.h>
> +#include <linux/uaccess.h>
> +#include <linux/watchdog.h>
> +
> +/* JH7110 WatchDog register define */
> +#define STARFIVE_WDT_JH7110_LOAD	0x000	/* RW: Watchdog load register */
> +#define STARFIVE_WDT_JH7110_VALUE	0x004	/* RO: The current value for the watchdog counter */
> +#define STARFIVE_WDT_JH7110_CONTROL	0x008	/*
> +						 * RW:
> +						 * [0]: reset enable;
> +						 * [1]: int enable/wdt enable/reload counter;
> +						 * [31:2]: reserve.
> +						 */
> +#define STARFIVE_WDT_JH7110_INTCLR	0x00c	/* WO: clear intterupt && reload the counter */
> +#define STARFIVE_WDT_JH7110_RIS		0x010	/* RO: Raw interrupt status from the counter */
> +#define STARFIVE_WDT_JH7110_IMS		0x014	/* RO: Enabled interrupt status from the counter */
> +#define STARFIVE_WDT_JH7110_LOCK	0xc00	/*
> +						 * RO: Enable write access to all other registers
> +						 * by writing 0x1ACCE551.
> +						 */
> +
> +#define STARFIVE_WDT_JH7110_UNLOCK_KEY		0x1acce551
> +#define STARFIVE_WDT_JH7110_RESEN_SHIFT		1
> +#define STARFIVE_WDT_JH7110_EN_SHIFT		0
> +
> +/* WDOGCONTROL */
> +#define STARFIVE_WDT_ENABLE	0x1
> +#define STARFIVE_WDT_RESET_EN	0x1
> +
> +/* WDOGLOCK */
> +#define STARFIVE_WDT_LOCKED	BIT(0)
> +
> +/* WDOGINTCLR */
> +#define STARFIVE_WDT_INTCLR	0x1
> +
> +#define STARFIVE_WDT_ATBOOT	0x0
> +#define STARFIVE_WDT_MAXCNT	0xffffffff
> +
> +#define STARFIVE_WDT_DEFAULT_TIME	(15)
> +#define STARFIVE_WDT_DELAY_US		0
> +#define STARFIVE_WDT_TIMEOUT_US		10000
> +
> +static bool nowayout = WATCHDOG_NOWAYOUT;
> +static int tmr_margin;
> +static int tmr_atboot = STARFIVE_WDT_ATBOOT;
> +static int soft_noboot;
> +
> +module_param(tmr_margin, int, 0);
> +module_param(tmr_atboot, int, 0);
> +module_param(nowayout, bool, 0);
> +module_param(soft_noboot, int, 0);
> +
> +MODULE_PARM_DESC(tmr_margin, "Watchdog tmr_margin in seconds. (default="
> +		 __MODULE_STRING(STARFIVE_WDT_DEFAULT_TIME) ")");
> +MODULE_PARM_DESC(tmr_atboot,
> +		 "Watchdog is started at boot time if set to 1, default="
> +		 __MODULE_STRING(STARFIVE_WDT_ATBOOT));
> +MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default="
> +		 __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
> +MODULE_PARM_DESC(soft_noboot,
> +		 "Watchdog action, set to 1 to ignore reboots, 0 to reboot (default 0)");
> +
> +struct starfive_wdt_variant {
> +	u32 control;
> +	u32 load;
> +	u32 enable;
> +	u32 value;
> +	u32 int_clr;
> +	u32 unlock;
> +	u32 unlock_key;
> +	u32 irq_is_raise;
> +	u8 enrst_shift;
> +	u8 en_shift;
> +};
> +
> +struct starfive_wdt {
> +	unsigned long freq;
> +	struct device *dev;
> +	struct watchdog_device wdt_device;
> +	struct clk *core_clk;
> +	struct clk *apb_clk;
> +	struct reset_control *rsts;
> +	const struct starfive_wdt_variant *drv_data;
> +	u32 count;	/*count of timeout*/
> +	u32 reload;	/*restore the count*/
> +	void __iomem *base;
> +	spinlock_t lock;	/* spinlock for register handling */
> +};
> +
> +#ifdef CONFIG_OF
> +/* Register bias in JH7110 */
> +static const struct starfive_wdt_variant drv_data_jh7110 = {
> +	.control = STARFIVE_WDT_JH7110_CONTROL,
> +	.load = STARFIVE_WDT_JH7110_LOAD,
> +	.enable = STARFIVE_WDT_JH7110_CONTROL,
> +	.value = STARFIVE_WDT_JH7110_VALUE,
> +	.int_clr = STARFIVE_WDT_JH7110_INTCLR,
> +	.unlock = STARFIVE_WDT_JH7110_LOCK,
> +	.unlock_key = STARFIVE_WDT_JH7110_UNLOCK_KEY,
> +	.irq_is_raise = STARFIVE_WDT_JH7110_IMS,
> +	.enrst_shift = STARFIVE_WDT_JH7110_RESEN_SHIFT,
> +	.en_shift = STARFIVE_WDT_JH7110_EN_SHIFT,
> +};
> +
> +static const struct of_device_id starfive_wdt_match[] = {
> +	{ .compatible = "starfive,jh7110-wdt", .data = &drv_data_jh7110 },
> +	{}
> +};
> +MODULE_DEVICE_TABLE(of, starfive_wdt_match);
> +#endif
> +
> +static const struct platform_device_id starfive_wdt_ids[] = {
> +	{
> +		.name = "starfive-jh7110-wdt",
> +		.driver_data = (unsigned long)&drv_data_jh7110,
> +	},
> +	{}
> +};
> +MODULE_DEVICE_TABLE(platform, starfive_wdt_ids);
> +
> +static int starfive_wdt_get_clock_rate(struct starfive_wdt *wdt)
> +{
> +	if (!IS_ERR(wdt->core_clk)) {
> +		wdt->freq = clk_get_rate(wdt->core_clk);
> +		return 0;
> +	}
> +	dev_err(wdt->dev, "get clock rate failed.\n");
> +
> +	return -ENOENT;
> +}
> +
> +static int starfive_wdt_enable_clock(struct starfive_wdt *wdt)
> +{
> +	int ret = 0;
> +
> +	wdt->apb_clk = devm_clk_get_enabled(wdt->dev, "apb");
> +	if (IS_ERR(wdt->apb_clk)) {
> +		dev_err(wdt->dev, "failed to get and enable apb clock.\n");
> +		ret = PTR_ERR(wdt->apb_clk);
> +		return ret;
> +	}
> +
> +	wdt->core_clk = devm_clk_get_enabled(wdt->dev, "core");
> +	if (IS_ERR(wdt->core_clk)) {
> +		dev_err(wdt->dev, "failed to get and enable core clock.\n");
> +		ret = PTR_ERR(wdt->core_clk);
> +	}
> +
> +	return ret;
> +}
> +
> +static int starfive_wdt_reset_init(struct starfive_wdt *wdt)
> +{
> +	int ret = 0;
> +
> +	wdt->rsts = devm_reset_control_array_get_exclusive(wdt->dev);
> +	if (!IS_ERR(wdt->rsts)) {
> +		ret = reset_control_deassert(wdt->rsts);
> +		if (ret)
> +			dev_err(wdt->dev, "failed to deassert rsts.\n");
> +	} else {
> +		dev_err(wdt->dev, "failed to get rsts error.\n");
> +		ret = PTR_ERR(wdt->rsts);
> +	}
> +
> +	return ret;
> +}
> +
> +static u32 starfive_wdt_ticks_to_sec(struct starfive_wdt *wdt, u32 ticks)
> +{
> +	return DIV_ROUND_CLOSEST(ticks, wdt->freq);
> +}
> +
> +/*
> + * Write unlock-key to unlock. Write other value to lock. When lock bit is 1,
> + * external accesses to other watchdog registers are ignored.
> + */
> +static bool starfive_wdt_is_locked(struct starfive_wdt *wdt)
> +{
> +	u32 val;
> +
> +	val = readl(wdt->base + wdt->drv_data->unlock);
> +	return !!(val & STARFIVE_WDT_LOCKED);
> +}
> +
> +static void starfive_wdt_unlock(struct starfive_wdt *wdt)
> +{
> +	if (starfive_wdt_is_locked(wdt))
> +		writel(wdt->drv_data->unlock_key,
> +		       wdt->base + wdt->drv_data->unlock);
> +}
> +
> +static void starfive_wdt_lock(struct starfive_wdt *wdt)
> +{
> +	if (!starfive_wdt_is_locked(wdt))
> +		writel(~wdt->drv_data->unlock_key,
> +		       wdt->base + wdt->drv_data->unlock);
> +}
> +
> +/* enable watchdog interrupt to reset */
> +static void starfive_wdt_enable_reset(struct starfive_wdt *wdt)
> +{
> +	u32 val;
> +
> +	val = readl(wdt->base + wdt->drv_data->control);
> +	val |= STARFIVE_WDT_RESET_EN << wdt->drv_data->enrst_shift;
> +	writel(val, wdt->base + wdt->drv_data->control);
> +}
> +
> +/* disable watchdog interrupt to reset */
> +static void starfive_wdt_disable_reset(struct starfive_wdt *wdt)
> +{
> +	u32 val;
> +
> +	val = readl(wdt->base + wdt->drv_data->control);
> +	val &= ~(STARFIVE_WDT_RESET_EN << wdt->drv_data->enrst_shift);
> +	writel(val, wdt->base + wdt->drv_data->control);
> +}
> +
> +/* interrupt status whether has been raised from the counter */
> +static bool starfive_wdt_raise_irq_status(struct starfive_wdt *wdt)
> +{
> +	return !!readl(wdt->base + wdt->drv_data->irq_is_raise);
> +}
> +
> +static void starfive_wdt_int_clr(struct starfive_wdt *wdt)
> +{
> +	writel(STARFIVE_WDT_INTCLR, wdt->base + wdt->drv_data->int_clr);
> +}
> +
> +static inline void starfive_wdt_set_count(struct starfive_wdt *wdt, u32 val)
> +{
> +	writel(val, wdt->base + wdt->drv_data->load);
> +}
> +
> +static inline u32 starfive_wdt_get_count(struct starfive_wdt *wdt)
> +{
> +	return readl(wdt->base + wdt->drv_data->value);
> +}
> +
> +static inline void starfive_wdt_enable(struct starfive_wdt *wdt)
> +{
> +	u32 val;
> +
> +	val = readl(wdt->base + wdt->drv_data->enable);
> +	val |= STARFIVE_WDT_ENABLE << wdt->drv_data->en_shift;
> +	writel(val, wdt->base + wdt->drv_data->enable);
> +}
> +
> +static inline void starfive_wdt_disable(struct starfive_wdt *wdt)
> +{
> +	u32 val;
> +
> +	val = readl(wdt->base + wdt->drv_data->enable);
> +	val &= ~(STARFIVE_WDT_ENABLE << wdt->drv_data->en_shift);
> +	writel(val, wdt->base + wdt->drv_data->enable);
> +}
> +
> +static inline void starfive_wdt_set_reload_count(struct starfive_wdt *wdt, u32 count)
> +{
> +	starfive_wdt_set_count(wdt, count);
> +	/* need enable controller to reload counter */
> +	starfive_wdt_enable(wdt);
> +}
> +
> +static void starfive_wdt_mask_and_disable_reset(struct starfive_wdt *wdt, bool mask)
> +{
> +	starfive_wdt_unlock(wdt);
> +
> +	if (mask)
> +		starfive_wdt_disable_reset(wdt);
> +	else
> +		starfive_wdt_enable_reset(wdt);
> +
> +	starfive_wdt_lock(wdt);
> +}
> +
> +static unsigned int starfive_wdt_max_timeout(struct starfive_wdt *wdt)
> +{
> +	return DIV_ROUND_UP(STARFIVE_WDT_MAXCNT, wdt->freq) - 1;
> +}
> +
> +static unsigned int starfive_wdt_get_timeleft(struct watchdog_device *wdd)
> +{
> +	struct starfive_wdt *wdt = watchdog_get_drvdata(wdd);
> +	u32 count;
> +
> +	starfive_wdt_unlock(wdt);
> +	/*
> +	 * Because set half count value,
> +	 * timeleft value should add the count value before first timeout.
> +	 */
> +	count = starfive_wdt_get_count(wdt);
> +	if (!starfive_wdt_raise_irq_status(wdt))
> +		count += wdt->count;
> +
> +	starfive_wdt_lock(wdt);
> +
> +	return starfive_wdt_ticks_to_sec(wdt, count);
> +}
> +
> +static int starfive_wdt_keepalive(struct watchdog_device *wdd)
> +{
> +	struct starfive_wdt *wdt = watchdog_get_drvdata(wdd);
> +
> +	spin_lock(&wdt->lock);
> +
> +	starfive_wdt_unlock(wdt);
> +	starfive_wdt_int_clr(wdt);
> +	starfive_wdt_set_reload_count(wdt, wdt->count);
> +	starfive_wdt_lock(wdt);
> +
> +	spin_unlock(&wdt->lock);
> +
> +	return 0;
> +}
> +
> +static int starfive_wdt_stop(struct watchdog_device *wdd)
> +{
> +	struct starfive_wdt *wdt = watchdog_get_drvdata(wdd);
> +
> +	spin_lock(&wdt->lock);
> +
> +	starfive_wdt_unlock(wdt);
> +	starfive_wdt_int_clr(wdt);
> +	starfive_wdt_disable(wdt);
> +	starfive_wdt_lock(wdt);
> +
> +	spin_unlock(&wdt->lock);
> +
> +	return 0;
> +}
> +
> +static int starfive_wdt_pm_stop(struct watchdog_device *wdd)
> +{
> +	struct starfive_wdt *wdt = watchdog_get_drvdata(wdd);
> +
> +	starfive_wdt_stop(wdd);
> +	pm_runtime_put(wdt->dev);
> +
> +	return 0;
> +}
> +
> +static int starfive_wdt_start(struct watchdog_device *wdd)
> +{
> +	struct starfive_wdt *wdt = watchdog_get_drvdata(wdd);
> +
> +	pm_runtime_get_sync(wdt->dev);
> +
> +	spin_lock(&wdt->lock);
> +
> +	starfive_wdt_unlock(wdt);
> +
> +	if (soft_noboot)
> +		starfive_wdt_disable_reset(wdt);
> +	else
> +		starfive_wdt_enable_reset(wdt);
> +
> +	starfive_wdt_int_clr(wdt);
> +	starfive_wdt_set_count(wdt, wdt->count);
> +	starfive_wdt_enable(wdt);
> +
> +	starfive_wdt_lock(wdt);
> +
> +	spin_unlock(&wdt->lock);
> +
> +	return 0;
> +}
> +
> +static int starfive_wdt_restart(struct watchdog_device *wdd, unsigned long action,
> +				void *data)
> +{
> +	struct starfive_wdt *wdt = watchdog_get_drvdata(wdd);
> +
> +	spin_lock(&wdt->lock);
> +	starfive_wdt_unlock(wdt);
> +	/* disable watchdog, to be safe */
> +	starfive_wdt_disable(wdt);
> +
> +	if (soft_noboot)
> +		starfive_wdt_disable_reset(wdt);
> +	else
> +		starfive_wdt_enable_reset(wdt);
> +
> +	/* put native values into count */
> +	starfive_wdt_set_count(wdt, wdt->count);
> +
> +	/* set the watchdog to go and reset */
> +	starfive_wdt_int_clr(wdt);
> +	starfive_wdt_enable(wdt);
> +
> +	starfive_wdt_lock(wdt);
> +	spin_unlock(&wdt->lock);
> +
> +	return 0;
> +}
> +
> +static int starfive_wdt_set_timeout(struct watchdog_device *wdd,
> +				    unsigned int timeout)
> +{
> +	struct starfive_wdt *wdt = watchdog_get_drvdata(wdd);
> +
> +	unsigned long freq = wdt->freq;
> +	unsigned int count;
> +
> +	spin_lock(&wdt->lock);
> +
> +	if (timeout < wdt->wdt_device.min_timeout)
> +		return -EINVAL;
> +
> +	/*
> +	 * This watchdog takes twice timeouts to reset.
> +	 * In order to reduce time to reset, should set half count value.
> +	 */
> +	count = timeout * freq / 2;
> +
> +	if (count > STARFIVE_WDT_MAXCNT) {
> +		dev_warn(wdt->dev, "timeout %d too big,use the MAX-timeout set.\n",
> +			 timeout);
> +		timeout = starfive_wdt_max_timeout(wdt);
> +		count = timeout * freq;
> +	}
> +
> +	dev_info(wdt->dev, "Heartbeat: timeout=%d, count/2=%d (%08x)\n",
> +		 timeout, count, count);
> +
> +	starfive_wdt_unlock(wdt);
> +	starfive_wdt_disable(wdt);
> +	starfive_wdt_set_reload_count(wdt, count);
> +	starfive_wdt_enable(wdt);
> +	starfive_wdt_lock(wdt);
> +
> +	wdt->count = count;
> +	wdd->timeout = timeout;
> +
> +	spin_unlock(&wdt->lock);
> +
> +	return 0;
> +}
> +
> +#define OPTIONS (WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE)
> +
> +static const struct watchdog_info starfive_wdt_ident = {
> +	.options = OPTIONS,
> +	.firmware_version = 0,
> +	.identity = "StarFive Watchdog",
> +};
> +
> +static const struct watchdog_ops starfive_wdt_ops = {
> +	.owner = THIS_MODULE,
> +	.start = starfive_wdt_start,
> +	.stop = starfive_wdt_pm_stop,
> +	.ping = starfive_wdt_keepalive,
> +	.set_timeout = starfive_wdt_set_timeout,
> +	.restart = starfive_wdt_restart,
> +	.get_timeleft = starfive_wdt_get_timeleft,
> +};
> +
> +static const struct watchdog_device starfive_wdd = {
> +	.info = &starfive_wdt_ident,
> +	.ops = &starfive_wdt_ops,
> +	.timeout = STARFIVE_WDT_DEFAULT_TIME,
> +};
> +
> +static inline const struct starfive_wdt_variant *
> +starfive_wdt_get_drv_data(struct platform_device *pdev)
> +{
> +	const struct starfive_wdt_variant *variant;
> +
> +	variant = of_device_get_match_data(&pdev->dev);
> +	if (!variant) {
> +		/* Device matched by platform_device_id */
> +		variant = (struct starfive_wdt_variant *)
> +			   platform_get_device_id(pdev)->driver_data;
> +	}
> +
> +	return variant;
> +}
> +
> +static int starfive_wdt_probe(struct platform_device *pdev)
> +{
> +	struct device *dev = &pdev->dev;
> +	struct starfive_wdt *wdt;
> +	int started = 0;
> +	int ret;
> +
> +	pm_runtime_enable(dev);
> +
> +	wdt = devm_kzalloc(dev, sizeof(*wdt), GFP_KERNEL);
> +	if (!wdt)
> +		return -ENOMEM;
> +
> +	wdt->dev = dev;
> +	spin_lock_init(&wdt->lock);
> +	wdt->wdt_device = starfive_wdd;
> +
> +	wdt->drv_data = starfive_wdt_get_drv_data(pdev);
> +
> +	/* get the memory region for the watchdog timer */
> +	wdt->base = devm_platform_ioremap_resource(pdev, 0);
> +	if (IS_ERR(wdt->base)) {
> +		ret = PTR_ERR(wdt->base);
> +		return ret;
> +	}
> +
> +	ret = starfive_wdt_enable_clock(wdt);
> +	if (ret)
> +		return ret;
> +
> +	ret = starfive_wdt_get_clock_rate(wdt);
> +	if (ret)
> +		goto err_clk_disable;
> +
> +	ret = starfive_wdt_reset_init(wdt);
> +	if (ret)
> +		goto err_clk_disable;
> +
> +	wdt->wdt_device.min_timeout = 1;
> +	wdt->wdt_device.max_timeout = starfive_wdt_max_timeout(wdt);
> +
> +	watchdog_set_drvdata(&wdt->wdt_device, wdt);
> +
> +	/*
> +	 * see if we can actually set the requested timer margin,
> +	 * and if not, try the default value.
> +	 */
> +	watchdog_init_timeout(&wdt->wdt_device, tmr_margin, dev);
> +
> +	ret = starfive_wdt_set_timeout(&wdt->wdt_device,
> +				       wdt->wdt_device.timeout);
> +	if (ret) {
> +		dev_err(dev, "tmr_margin value out of range, default %d used\n",
> +			STARFIVE_WDT_DEFAULT_TIME);
> +		starfive_wdt_set_timeout(&wdt->wdt_device,
> +					 STARFIVE_WDT_DEFAULT_TIME);
> +	}
> +
> +	watchdog_set_nowayout(&wdt->wdt_device, nowayout);
> +	watchdog_set_restart_priority(&wdt->wdt_device, 128);
> +	watchdog_stop_on_reboot(&wdt->wdt_device);
> +	watchdog_stop_on_unregister(&wdt->wdt_device);
> +
> +	wdt->wdt_device.parent = dev;
> +
> +	ret = watchdog_register_device(&wdt->wdt_device);
> +	if (ret)
> +		goto err_clk_disable;
> +
> +	starfive_wdt_mask_and_disable_reset(wdt, false);
> +
> +	if (tmr_atboot && started == 0) {
> +		starfive_wdt_start(&wdt->wdt_device);
> +	} else if (!tmr_atboot) {
> +		/*
> +		 *if we're not enabling the watchdog, then ensure it is
> +		 * disabled if it has been left running from the bootloader
> +		 * or other source.
> +		 */
> +		starfive_wdt_stop(&wdt->wdt_device);
> +	}
> +
> +#ifdef CONFIG_PM
> +	clk_disable_unprepare(wdt->core_clk);
> +	clk_disable_unprepare(wdt->apb_clk);
> +#endif
> +
> +	platform_set_drvdata(pdev, wdt);
> +
> +	return 0;
> +
> +err_clk_disable:
> +	clk_disable_unprepare(wdt->core_clk);
> +	clk_disable_unprepare(wdt->apb_clk);
> +
> +	return ret;
> +}
> +
> +static int starfive_wdt_remove(struct platform_device *dev)
> +{
> +	struct starfive_wdt *wdt = platform_get_drvdata(dev);
> +
> +	starfive_wdt_mask_and_disable_reset(wdt, true);
> +	watchdog_unregister_device(&wdt->wdt_device);
> +
> +	clk_disable_unprepare(wdt->core_clk);
> +	clk_disable_unprepare(wdt->apb_clk);
> +	pm_runtime_disable(wdt->dev);
> +
> +	return 0;
> +}
> +
> +static void starfive_wdt_shutdown(struct platform_device *dev)
> +{
> +	struct starfive_wdt *wdt = platform_get_drvdata(dev);
> +
> +	starfive_wdt_mask_and_disable_reset(wdt, true);
> +
> +	starfive_wdt_pm_stop(&wdt->wdt_device);
> +}
> +
> +#ifdef CONFIG_PM_SLEEP
> +static int starfive_wdt_suspend(struct device *dev)
> +{
> +	int ret;
> +	struct starfive_wdt *wdt = dev_get_drvdata(dev);
> +
> +	starfive_wdt_unlock(wdt);
> +
> +	/* Save watchdog state, and turn it off. */
> +	wdt->reload = starfive_wdt_get_count(wdt);
> +
> +	starfive_wdt_mask_and_disable_reset(wdt, true);
> +
> +	/* Note that WTCNT doesn't need to be saved. */
> +	starfive_wdt_stop(&wdt->wdt_device);
> +	pm_runtime_force_suspend(dev);
> +
> +	starfive_wdt_lock(wdt);
> +
> +	return 0;
> +}
> +
> +static int starfive_wdt_resume(struct device *dev)
> +{
> +	int ret;
> +	struct starfive_wdt *wdt = dev_get_drvdata(dev);
> +
> +	starfive_wdt_unlock(wdt);
> +
> +	pm_runtime_force_resume(dev);
> +
> +	/* Restore watchdog state. */
> +	starfive_wdt_set_reload_count(wdt, wdt->reload);
> +
> +	starfive_wdt_restart(&wdt->wdt_device, 0, NULL);
> +
> +	starfive_wdt_mask_and_disable_reset(wdt, false);
> +
> +	starfive_wdt_lock(wdt);
> +
> +	return 0;
> +}
> +#endif /* CONFIG_PM_SLEEP */
> +
> +#ifdef CONFIG_PM
> +static int starfive_wdt_runtime_suspend(struct device *dev)
> +{
> +	struct starfive_wdt *wdt = dev_get_drvdata(dev);
> +
> +	clk_disable_unprepare(wdt->apb_clk);
> +	clk_disable_unprepare(wdt->core_clk);
> +
> +	return 0;
> +}
> +
> +static int starfive_wdt_runtime_resume(struct device *dev)
> +{
> +	struct starfive_wdt *wdt = dev_get_drvdata(dev);
> +	int ret;
> +
> +	ret = clk_prepare_enable(wdt->apb_clk);
> +	if (ret) {
> +		dev_err(wdt->dev, "failed to enable apb_clk.\n");
> +		return ret;
> +	}
> +
> +	ret = clk_prepare_enable(wdt->core_clk);
> +	if (ret)
> +		dev_err(wdt->dev, "failed to enable core_clk.\n");
> +
> +	return ret;
> +}
> +#endif /* CONFIG_PM */
> +
> +static const struct dev_pm_ops starfive_wdt_pm_ops = {
> +	SET_RUNTIME_PM_OPS(starfive_wdt_runtime_suspend, starfive_wdt_runtime_resume, NULL)
> +	SET_SYSTEM_SLEEP_PM_OPS(starfive_wdt_suspend, starfive_wdt_resume)
> +};
> +
> +static struct platform_driver starfive_wdt_driver = {
> +	.probe		= starfive_wdt_probe,
> +	.remove		= starfive_wdt_remove,
> +	.shutdown	= starfive_wdt_shutdown,
> +	.id_table	= starfive_wdt_ids,
> +	.driver		= {
> +		.name	= "starfive-wdt",
> +		.pm	= &starfive_wdt_pm_ops,
> +		.of_match_table = of_match_ptr(starfive_wdt_match),
> +	},
> +};
> +
> +module_platform_driver(starfive_wdt_driver);
> +
> +MODULE_AUTHOR("Xingyu Wu <xingyu.wu@starfivetech.com>");
> +MODULE_AUTHOR("Samin Guo <samin.guo@starfivetech.com>");
> +MODULE_DESCRIPTION("StarFive Watchdog Device Driver");
> +MODULE_LICENSE("GPL v2");

Hi Guenter/Wim,

Could you please help to review and provide any comments on this patch?
Thanks.

Best regards,
Xingyu Wu
Guenter Roeck Feb. 1, 2023, 10:46 p.m. UTC | #2
On Mon, Dec 19, 2022 at 05:42:32PM +0800, Xingyu Wu wrote:
> Add watchdog driver for the StarFive JH7110 SoC.
> 
> Signed-off-by: Xingyu Wu <xingyu.wu@starfivetech.com>

This driver is almost impossible for me to review. There is a lot of code
which doesn't make sense to me. I'll outline some of it below, but this is
by far not a complete review.

> ---
>  MAINTAINERS                     |   7 +
>  drivers/watchdog/Kconfig        |  11 +
>  drivers/watchdog/Makefile       |   3 +
>  drivers/watchdog/starfive-wdt.c | 720 ++++++++++++++++++++++++++++++++
>  4 files changed, 741 insertions(+)
>  create mode 100644 drivers/watchdog/starfive-wdt.c
> 
> diff --git a/MAINTAINERS b/MAINTAINERS
> index a70c1d0f303e..9c1758e7d034 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -19623,6 +19623,13 @@ F:	Documentation/devicetree/bindings/reset/starfive,jh7100-reset.yaml
>  F:	drivers/reset/starfive/
>  F:	include/dt-bindings/reset/starfive*
>  
> +STARFIVE JH7110 WATCHDOG DRIVER
> +M:	Xingyu Wu <xingyu.wu@starfivetech.com>
> +M:	Samin Guo <samin.guo@starfivetech.com>
> +S:	Supported
> +F:	Documentation/devicetree/bindings/watchdog/starfive*
> +F:	drivers/watchdog/starfive-wdt.c
> +
>  STATIC BRANCH/CALL
>  M:	Peter Zijlstra <peterz@infradead.org>
>  M:	Josh Poimboeuf <jpoimboe@kernel.org>
> diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
> index b64bc49c7f30..8eeb0e23e98d 100644
> --- a/drivers/watchdog/Kconfig
> +++ b/drivers/watchdog/Kconfig
> @@ -2082,6 +2082,17 @@ config UML_WATCHDOG
>  	tristate "UML watchdog"
>  	depends on UML || COMPILE_TEST
>  
> +# RISCV Architecture
> +
> +config STARFIVE_WATCHDOG
> +	tristate "StarFive Watchdog support"
> +	depends on RISCV
> +	select WATCHDOG_CORE
> +	default SOC_STARFIVE
> +	help
> +	  Say Y here to support the watchdog of StarFive JH7110 SoC.
> +	  This driver can also be built as a module if choose M.
> +
>  #
>  # ISA-based Watchdog Cards
>  #
> diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile
> index d41e5f830ae7..9c22f1a43d5c 100644
> --- a/drivers/watchdog/Makefile
> +++ b/drivers/watchdog/Makefile
> @@ -210,6 +210,9 @@ obj-$(CONFIG_WATCHDOG_SUN4V)		+= sun4v_wdt.o
>  # Xen
>  obj-$(CONFIG_XEN_WDT) += xen_wdt.o
>  
> +# RISCV Architecture
> +obj-$(CONFIG_STARFIVE_WATCHDOG) += starfive-wdt.o
> +
>  # Architecture Independent
>  obj-$(CONFIG_BD957XMUF_WATCHDOG) += bd9576_wdt.o
>  obj-$(CONFIG_DA9052_WATCHDOG) += da9052_wdt.o
> diff --git a/drivers/watchdog/starfive-wdt.c b/drivers/watchdog/starfive-wdt.c
> new file mode 100644
> index 000000000000..d7fad0a2207c
> --- /dev/null
> +++ b/drivers/watchdog/starfive-wdt.c
> @@ -0,0 +1,720 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Starfive Watchdog driver
> + *
> + * Copyright (C) 2022 StarFive Technology Co., Ltd.
> + */
> +
> +#include <linux/clk.h>
> +#include <linux/delay.h>
> +#include <linux/err.h>
> +#include <linux/interrupt.h>
> +#include <linux/io.h>
> +#include <linux/iopoll.h>
> +#include <linux/module.h>
> +#include <linux/moduleparam.h>
> +#include <linux/of.h>
> +#include <linux/of_device.h>
> +#include <linux/platform_device.h>
> +#include <linux/pm_runtime.h>
> +#include <linux/reset.h>
> +#include <linux/reset-controller.h>
> +#include <linux/slab.h>
> +#include <linux/timer.h>
> +#include <linux/types.h>
> +#include <linux/uaccess.h>
> +#include <linux/watchdog.h>

Several of those include files are unnecessary.

> +
> +/* JH7110 WatchDog register define */
> +#define STARFIVE_WDT_JH7110_LOAD	0x000	/* RW: Watchdog load register */
> +#define STARFIVE_WDT_JH7110_VALUE	0x004	/* RO: The current value for the watchdog counter */
> +#define STARFIVE_WDT_JH7110_CONTROL	0x008	/*
> +						 * RW:
> +						 * [0]: reset enable;
> +						 * [1]: int enable/wdt enable/reload counter;
> +						 * [31:2]: reserve.
> +						 */
> +#define STARFIVE_WDT_JH7110_INTCLR	0x00c	/* WO: clear intterupt && reload the counter */
> +#define STARFIVE_WDT_JH7110_RIS		0x010	/* RO: Raw interrupt status from the counter */
> +#define STARFIVE_WDT_JH7110_IMS		0x014	/* RO: Enabled interrupt status from the counter */
> +#define STARFIVE_WDT_JH7110_LOCK	0xc00	/*
> +						 * RO: Enable write access to all other registers
> +						 * by writing 0x1ACCE551.
> +						 */
> +
> +#define STARFIVE_WDT_JH7110_UNLOCK_KEY		0x1acce551
> +#define STARFIVE_WDT_JH7110_RESEN_SHIFT		1
> +#define STARFIVE_WDT_JH7110_EN_SHIFT		0
> +
> +/* WDOGCONTROL */
> +#define STARFIVE_WDT_ENABLE	0x1
> +#define STARFIVE_WDT_RESET_EN	0x1
> +
> +/* WDOGLOCK */
> +#define STARFIVE_WDT_LOCKED	BIT(0)
> +
> +/* WDOGINTCLR */
> +#define STARFIVE_WDT_INTCLR	0x1
> +
> +#define STARFIVE_WDT_ATBOOT	0x0
> +#define STARFIVE_WDT_MAXCNT	0xffffffff
> +
> +#define STARFIVE_WDT_DEFAULT_TIME	(15)
> +#define STARFIVE_WDT_DELAY_US		0
> +#define STARFIVE_WDT_TIMEOUT_US		10000
> +
> +static bool nowayout = WATCHDOG_NOWAYOUT;
> +static int tmr_margin;
> +static int tmr_atboot = STARFIVE_WDT_ATBOOT;
> +static int soft_noboot;
> +
> +module_param(tmr_margin, int, 0);
> +module_param(tmr_atboot, int, 0);
> +module_param(nowayout, bool, 0);
> +module_param(soft_noboot, int, 0);
> +
> +MODULE_PARM_DESC(tmr_margin, "Watchdog tmr_margin in seconds. (default="
> +		 __MODULE_STRING(STARFIVE_WDT_DEFAULT_TIME) ")");

Use "timeout" or "heartbeat".

> +MODULE_PARM_DESC(tmr_atboot,
> +		 "Watchdog is started at boot time if set to 1, default="
> +		 __MODULE_STRING(STARFIVE_WDT_ATBOOT));

Use "early_enable"

> +MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default="
> +		 __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
> +MODULE_PARM_DESC(soft_noboot,
> +		 "Watchdog action, set to 1 to ignore reboots, 0 to reboot (default 0)");

I do not understand what this module parameter is supposed to be used for,
and what the "soft_' prefix is supposed to mean.

> +
> +struct starfive_wdt_variant {
> +	u32 control;
> +	u32 load;
> +	u32 enable;
> +	u32 value;
> +	u32 int_clr;
> +	u32 unlock;
> +	u32 unlock_key;
> +	u32 irq_is_raise;
> +	u8 enrst_shift;
> +	u8 en_shift;
> +};
> +
> +struct starfive_wdt {
> +	unsigned long freq;
> +	struct device *dev;
> +	struct watchdog_device wdt_device;
> +	struct clk *core_clk;
> +	struct clk *apb_clk;
> +	struct reset_control *rsts;
> +	const struct starfive_wdt_variant *drv_data;
> +	u32 count;	/*count of timeout*/
> +	u32 reload;	/*restore the count*/
> +	void __iomem *base;
> +	spinlock_t lock;	/* spinlock for register handling */
> +};
> +
> +#ifdef CONFIG_OF
> +/* Register bias in JH7110 */
> +static const struct starfive_wdt_variant drv_data_jh7110 = {
> +	.control = STARFIVE_WDT_JH7110_CONTROL,
> +	.load = STARFIVE_WDT_JH7110_LOAD,
> +	.enable = STARFIVE_WDT_JH7110_CONTROL,
> +	.value = STARFIVE_WDT_JH7110_VALUE,
> +	.int_clr = STARFIVE_WDT_JH7110_INTCLR,
> +	.unlock = STARFIVE_WDT_JH7110_LOCK,
> +	.unlock_key = STARFIVE_WDT_JH7110_UNLOCK_KEY,
> +	.irq_is_raise = STARFIVE_WDT_JH7110_IMS,
> +	.enrst_shift = STARFIVE_WDT_JH7110_RESEN_SHIFT,
> +	.en_shift = STARFIVE_WDT_JH7110_EN_SHIFT,
> +};
> +
> +static const struct of_device_id starfive_wdt_match[] = {
> +	{ .compatible = "starfive,jh7110-wdt", .data = &drv_data_jh7110 },
> +	{}
> +};
> +MODULE_DEVICE_TABLE(of, starfive_wdt_match);
> +#endif
> +
> +static const struct platform_device_id starfive_wdt_ids[] = {
> +	{
> +		.name = "starfive-jh7110-wdt",
> +		.driver_data = (unsigned long)&drv_data_jh7110,

This will fail to compile if CONFIG_OF=n.

> +	},
> +	{}
> +};
> +MODULE_DEVICE_TABLE(platform, starfive_wdt_ids);
> +
> +static int starfive_wdt_get_clock_rate(struct starfive_wdt *wdt)
> +{
> +	if (!IS_ERR(wdt->core_clk)) {
> +		wdt->freq = clk_get_rate(wdt->core_clk);

wdt->freq can at least in theory be 0, which would
result in a zero-divide crash later on.

> +		return 0;
> +	}
> +	dev_err(wdt->dev, "get clock rate failed.\n");
> +
> +	return -ENOENT;

The above code can not be reached.

> +}
> +
> +static int starfive_wdt_enable_clock(struct starfive_wdt *wdt)
> +{
> +	int ret = 0;
> +
> +	wdt->apb_clk = devm_clk_get_enabled(wdt->dev, "apb");
> +	if (IS_ERR(wdt->apb_clk)) {
> +		dev_err(wdt->dev, "failed to get and enable apb clock.\n");
> +		ret = PTR_ERR(wdt->apb_clk);
> +		return ret;
> +	}
> +
> +	wdt->core_clk = devm_clk_get_enabled(wdt->dev, "core");
> +	if (IS_ERR(wdt->core_clk)) {
> +		dev_err(wdt->dev, "failed to get and enable core clock.\n");
> +		ret = PTR_ERR(wdt->core_clk);
> +	}
> +
> +	return ret;
> +}
> +
> +static int starfive_wdt_reset_init(struct starfive_wdt *wdt)
> +{
> +	int ret = 0;
> +
> +	wdt->rsts = devm_reset_control_array_get_exclusive(wdt->dev);
> +	if (!IS_ERR(wdt->rsts)) {

Error handling should come first, and return immediately.

> +		ret = reset_control_deassert(wdt->rsts);
> +		if (ret)
> +			dev_err(wdt->dev, "failed to deassert rsts.\n");
> +	} else {
> +		dev_err(wdt->dev, "failed to get rsts error.\n");
> +		ret = PTR_ERR(wdt->rsts);
> +	}
> +
> +	return ret;
> +}
> +
> +static u32 starfive_wdt_ticks_to_sec(struct starfive_wdt *wdt, u32 ticks)
> +{
> +	return DIV_ROUND_CLOSEST(ticks, wdt->freq);
> +}
> +
> +/*
> + * Write unlock-key to unlock. Write other value to lock. When lock bit is 1,
> + * external accesses to other watchdog registers are ignored.
> + */
> +static bool starfive_wdt_is_locked(struct starfive_wdt *wdt)
> +{
> +	u32 val;
> +
> +	val = readl(wdt->base + wdt->drv_data->unlock);
> +	return !!(val & STARFIVE_WDT_LOCKED);
> +}
> +
> +static void starfive_wdt_unlock(struct starfive_wdt *wdt)
> +{
> +	if (starfive_wdt_is_locked(wdt))
> +		writel(wdt->drv_data->unlock_key,
> +		       wdt->base + wdt->drv_data->unlock);
> +}
> +
> +static void starfive_wdt_lock(struct starfive_wdt *wdt)
> +{
> +	if (!starfive_wdt_is_locked(wdt))
> +		writel(~wdt->drv_data->unlock_key,
> +		       wdt->base + wdt->drv_data->unlock);
> +}
> +
> +/* enable watchdog interrupt to reset */
> +static void starfive_wdt_enable_reset(struct starfive_wdt *wdt)
> +{
> +	u32 val;
> +
> +	val = readl(wdt->base + wdt->drv_data->control);
> +	val |= STARFIVE_WDT_RESET_EN << wdt->drv_data->enrst_shift;
> +	writel(val, wdt->base + wdt->drv_data->control);
> +}
> +
> +/* disable watchdog interrupt to reset */
> +static void starfive_wdt_disable_reset(struct starfive_wdt *wdt)
> +{
> +	u32 val;
> +
> +	val = readl(wdt->base + wdt->drv_data->control);
> +	val &= ~(STARFIVE_WDT_RESET_EN << wdt->drv_data->enrst_shift);
> +	writel(val, wdt->base + wdt->drv_data->control);
> +}
> +
> +/* interrupt status whether has been raised from the counter */
> +static bool starfive_wdt_raise_irq_status(struct starfive_wdt *wdt)
> +{
> +	return !!readl(wdt->base + wdt->drv_data->irq_is_raise);
> +}
> +
> +static void starfive_wdt_int_clr(struct starfive_wdt *wdt)
> +{
> +	writel(STARFIVE_WDT_INTCLR, wdt->base + wdt->drv_data->int_clr);
> +}

There is no explanation for this interrupt handling (or, rather,
non-handling since there is no interrupt handler. What is the purpose
of even having all this code ?

> +
> +static inline void starfive_wdt_set_count(struct starfive_wdt *wdt, u32 val)
> +{
> +	writel(val, wdt->base + wdt->drv_data->load);
> +}
> +
> +static inline u32 starfive_wdt_get_count(struct starfive_wdt *wdt)
> +{
> +	return readl(wdt->base + wdt->drv_data->value);
> +}
> +
> +static inline void starfive_wdt_enable(struct starfive_wdt *wdt)
> +{
> +	u32 val;
> +
> +	val = readl(wdt->base + wdt->drv_data->enable);
> +	val |= STARFIVE_WDT_ENABLE << wdt->drv_data->en_shift;
> +	writel(val, wdt->base + wdt->drv_data->enable);
> +}
> +
> +static inline void starfive_wdt_disable(struct starfive_wdt *wdt)
> +{
> +	u32 val;
> +
> +	val = readl(wdt->base + wdt->drv_data->enable);
> +	val &= ~(STARFIVE_WDT_ENABLE << wdt->drv_data->en_shift);
> +	writel(val, wdt->base + wdt->drv_data->enable);
> +}
> +
> +static inline void starfive_wdt_set_reload_count(struct starfive_wdt *wdt, u32 count)
> +{
> +	starfive_wdt_set_count(wdt, count);
> +	/* need enable controller to reload counter */
> +	starfive_wdt_enable(wdt);
> +}
> +
> +static void starfive_wdt_mask_and_disable_reset(struct starfive_wdt *wdt, bool mask)
> +{
> +	starfive_wdt_unlock(wdt);
> +
> +	if (mask)
> +		starfive_wdt_disable_reset(wdt);
> +	else
> +		starfive_wdt_enable_reset(wdt);
> +
> +	starfive_wdt_lock(wdt);
> +}
> +
> +static unsigned int starfive_wdt_max_timeout(struct starfive_wdt *wdt)
> +{
> +	return DIV_ROUND_UP(STARFIVE_WDT_MAXCNT, wdt->freq) - 1;
> +}

For a frequency of 1 MHz, this results in a maximum timeout of 4294.

This value is then used in starfive_wdt_set_timeout(), but as
(4294 * 1000000) / 2, which is then again compared against
STARFIVE_WDT_MAXCNT. Somewhere this calculation is wrong.



> +
> +static unsigned int starfive_wdt_get_timeleft(struct watchdog_device *wdd)
> +{
> +	struct starfive_wdt *wdt = watchdog_get_drvdata(wdd);
> +	u32 count;
> +
> +	starfive_wdt_unlock(wdt);
> +	/*
> +	 * Because set half count value,
> +	 * timeleft value should add the count value before first timeout.
> +	 */
> +	count = starfive_wdt_get_count(wdt);
> +	if (!starfive_wdt_raise_irq_status(wdt))
> +		count += wdt->count;
> +
> +	starfive_wdt_lock(wdt);
> +
> +	return starfive_wdt_ticks_to_sec(wdt, count);
> +}
> +
> +static int starfive_wdt_keepalive(struct watchdog_device *wdd)
> +{
> +	struct starfive_wdt *wdt = watchdog_get_drvdata(wdd);
> +
> +	spin_lock(&wdt->lock);
> +
> +	starfive_wdt_unlock(wdt);
> +	starfive_wdt_int_clr(wdt);
> +	starfive_wdt_set_reload_count(wdt, wdt->count);
> +	starfive_wdt_lock(wdt);
> +
> +	spin_unlock(&wdt->lock);
> +
> +	return 0;
> +}
> +
> +static int starfive_wdt_stop(struct watchdog_device *wdd)
> +{
> +	struct starfive_wdt *wdt = watchdog_get_drvdata(wdd);
> +
> +	spin_lock(&wdt->lock);
> +
> +	starfive_wdt_unlock(wdt);
> +	starfive_wdt_int_clr(wdt);
> +	starfive_wdt_disable(wdt);
> +	starfive_wdt_lock(wdt);
> +
> +	spin_unlock(&wdt->lock);
> +
> +	return 0;
> +}
> +
> +static int starfive_wdt_pm_stop(struct watchdog_device *wdd)
> +{
> +	struct starfive_wdt *wdt = watchdog_get_drvdata(wdd);
> +
> +	starfive_wdt_stop(wdd);
> +	pm_runtime_put(wdt->dev);
> +
> +	return 0;
> +}
> +
> +static int starfive_wdt_start(struct watchdog_device *wdd)
> +{
> +	struct starfive_wdt *wdt = watchdog_get_drvdata(wdd);
> +
> +	pm_runtime_get_sync(wdt->dev);
> +
> +	spin_lock(&wdt->lock);
> +
> +	starfive_wdt_unlock(wdt);
> +
> +	if (soft_noboot)
> +		starfive_wdt_disable_reset(wdt);
> +	else
> +		starfive_wdt_enable_reset(wdt);
> +
> +	starfive_wdt_int_clr(wdt);
> +	starfive_wdt_set_count(wdt, wdt->count);
> +	starfive_wdt_enable(wdt);
> +
> +	starfive_wdt_lock(wdt);
> +
> +	spin_unlock(&wdt->lock);
> +
> +	return 0;
> +}
> +
> +static int starfive_wdt_restart(struct watchdog_device *wdd, unsigned long action,
> +				void *data)
> +{
> +	struct starfive_wdt *wdt = watchdog_get_drvdata(wdd);
> +
> +	spin_lock(&wdt->lock);
> +	starfive_wdt_unlock(wdt);
> +	/* disable watchdog, to be safe */
> +	starfive_wdt_disable(wdt);
> +
> +	if (soft_noboot)
> +		starfive_wdt_disable_reset(wdt);
> +	else
> +		starfive_wdt_enable_reset(wdt);
> +

This is a _restart_ handler. Disabling it doesn't make any sense.

> +	/* put native values into count */
> +	starfive_wdt_set_count(wdt, wdt->count);
> +
> +	/* set the watchdog to go and reset */
> +	starfive_wdt_int_clr(wdt);
> +	starfive_wdt_enable(wdt);
> +
> +	starfive_wdt_lock(wdt);
> +	spin_unlock(&wdt->lock);
> +
> +	return 0;
> +}
> +
> +static int starfive_wdt_set_timeout(struct watchdog_device *wdd,
> +				    unsigned int timeout)
> +{
> +	struct starfive_wdt *wdt = watchdog_get_drvdata(wdd);
> +
> +	unsigned long freq = wdt->freq;
> +	unsigned int count;
> +
> +	spin_lock(&wdt->lock);
> +
> +	if (timeout < wdt->wdt_device.min_timeout)
> +		return -EINVAL;

This is checked by the watchdog core.

> +
> +	/*
> +	 * This watchdog takes twice timeouts to reset.
> +	 * In order to reduce time to reset, should set half count value.
> +	 */
> +	count = timeout * freq / 2;
> +
> +	if (count > STARFIVE_WDT_MAXCNT) {

count is an unsigned int, which is pretty much everywhere a 32-bit
value. STARFIVE_WDT_MAXCNT is 0xffffffff. How is an unsigned integer
ever supposed to be larger than 0xffffffff ?

> +		dev_warn(wdt->dev, "timeout %d too big,use the MAX-timeout set.\n",
> +			 timeout);
> +		timeout = starfive_wdt_max_timeout(wdt);
> +		count = timeout * freq;

This is confusing. First, the timeout range is checked by the calling code,
which makes sure it is never larger than max_timeout. max_timeout is
set to the value returned by starfive_wdt_max_timeout().
Thus, count = timeout * freq / 2 will _never_ be larger than
STARFIVE_WDT_MAXCNT. Even if it ever was, it doesn't make sense
to use a count value of timeout * freq in that case, ie a value which
could be twice as large as the supposed maximum value.

> +	}
> +
> +	dev_info(wdt->dev, "Heartbeat: timeout=%d, count/2=%d (%08x)\n",
> +		 timeout, count, count);

No. Drop such noise. Make it a debug message if you think you need it.

> +
> +	starfive_wdt_unlock(wdt);
> +	starfive_wdt_disable(wdt);
> +	starfive_wdt_set_reload_count(wdt, count);
> +	starfive_wdt_enable(wdt);
> +	starfive_wdt_lock(wdt);
> +
> +	wdt->count = count;
> +	wdd->timeout = timeout;
> +
> +	spin_unlock(&wdt->lock);
> +
> +	return 0;
> +}
> +
> +#define OPTIONS (WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE)
> +
> +static const struct watchdog_info starfive_wdt_ident = {
> +	.options = OPTIONS,
> +	.firmware_version = 0,

It is not necessary to initilize a static variable with 0.

> +	.identity = "StarFive Watchdog",
> +};
> +
> +static const struct watchdog_ops starfive_wdt_ops = {
> +	.owner = THIS_MODULE,
> +	.start = starfive_wdt_start,
> +	.stop = starfive_wdt_pm_stop,
> +	.ping = starfive_wdt_keepalive,
> +	.set_timeout = starfive_wdt_set_timeout,
> +	.restart = starfive_wdt_restart,
> +	.get_timeleft = starfive_wdt_get_timeleft,
> +};
> +
> +static const struct watchdog_device starfive_wdd = {
> +	.info = &starfive_wdt_ident,
> +	.ops = &starfive_wdt_ops,
> +	.timeout = STARFIVE_WDT_DEFAULT_TIME,
> +};
> +
> +static inline const struct starfive_wdt_variant *
> +starfive_wdt_get_drv_data(struct platform_device *pdev)
> +{
> +	const struct starfive_wdt_variant *variant;
> +
> +	variant = of_device_get_match_data(&pdev->dev);
> +	if (!variant) {
> +		/* Device matched by platform_device_id */
> +		variant = (struct starfive_wdt_variant *)
> +			   platform_get_device_id(pdev)->driver_data;
> +	}
> +
> +	return variant;
> +}
> +
> +static int starfive_wdt_probe(struct platform_device *pdev)
> +{
> +	struct device *dev = &pdev->dev;
> +	struct starfive_wdt *wdt;
> +	int started = 0;

What is this variable supposed to be used for ? It is alway 0.

> +	int ret;
> +
> +	pm_runtime_enable(dev);
> +
> +	wdt = devm_kzalloc(dev, sizeof(*wdt), GFP_KERNEL);
> +	if (!wdt)
> +		return -ENOMEM;
> +
> +	wdt->dev = dev;
> +	spin_lock_init(&wdt->lock);
> +	wdt->wdt_device = starfive_wdd;
> +
> +	wdt->drv_data = starfive_wdt_get_drv_data(pdev);
> +
> +	/* get the memory region for the watchdog timer */
> +	wdt->base = devm_platform_ioremap_resource(pdev, 0);
> +	if (IS_ERR(wdt->base)) {
> +		ret = PTR_ERR(wdt->base);
> +		return ret;
> +	}
> +
> +	ret = starfive_wdt_enable_clock(wdt);
> +	if (ret)
> +		return ret;
> +
> +	ret = starfive_wdt_get_clock_rate(wdt);
> +	if (ret)
> +		goto err_clk_disable;
> +
> +	ret = starfive_wdt_reset_init(wdt);
> +	if (ret)
> +		goto err_clk_disable;
> +
> +	wdt->wdt_device.min_timeout = 1;
> +	wdt->wdt_device.max_timeout = starfive_wdt_max_timeout(wdt);
> +
> +	watchdog_set_drvdata(&wdt->wdt_device, wdt);
> +
> +	/*
> +	 * see if we can actually set the requested timer margin,
> +	 * and if not, try the default value.
> +	 */
> +	watchdog_init_timeout(&wdt->wdt_device, tmr_margin, dev);
> +
> +	ret = starfive_wdt_set_timeout(&wdt->wdt_device,
> +				       wdt->wdt_device.timeout);
> +	if (ret) {
> +		dev_err(dev, "tmr_margin value out of range, default %d used\n",
> +			STARFIVE_WDT_DEFAULT_TIME);
> +		starfive_wdt_set_timeout(&wdt->wdt_device,
> +					 STARFIVE_WDT_DEFAULT_TIME);
> +	}
> +
> +	watchdog_set_nowayout(&wdt->wdt_device, nowayout);
> +	watchdog_set_restart_priority(&wdt->wdt_device, 128);
> +	watchdog_stop_on_reboot(&wdt->wdt_device);
> +	watchdog_stop_on_unregister(&wdt->wdt_device);
> +
> +	wdt->wdt_device.parent = dev;
> +
> +	ret = watchdog_register_device(&wdt->wdt_device);
> +	if (ret)
> +		goto err_clk_disable;
> +
> +	starfive_wdt_mask_and_disable_reset(wdt, false);
> +
> +	if (tmr_atboot && started == 0) {
> +		starfive_wdt_start(&wdt->wdt_device);
> +	} else if (!tmr_atboot) {
> +		/*
> +		 *if we're not enabling the watchdog, then ensure it is
> +		 * disabled if it has been left running from the bootloader
> +		 * or other source.
> +		 */
> +		starfive_wdt_stop(&wdt->wdt_device);

If it _is_ running from the boot loader, the watchdog core is not
informed about it. If it is started here, it is not informed either.
This is unusual and will need to be explained.
Why ?

> +	}
> +
> +#ifdef CONFIG_PM
> +	clk_disable_unprepare(wdt->core_clk);
> +	clk_disable_unprepare(wdt->apb_clk);
> +#endif

I do not understand the above code. Why stop the watchdog if CONFIG_PM
is enabled, even if it is supposed to be running ?

> +
> +	platform_set_drvdata(pdev, wdt);
> +
> +	return 0;
> +
> +err_clk_disable:
> +	clk_disable_unprepare(wdt->core_clk);
> +	clk_disable_unprepare(wdt->apb_clk);
> +
> +	return ret;
> +}
> +
> +static int starfive_wdt_remove(struct platform_device *dev)
> +{
> +	struct starfive_wdt *wdt = platform_get_drvdata(dev);
> +
> +	starfive_wdt_mask_and_disable_reset(wdt, true);
> +	watchdog_unregister_device(&wdt->wdt_device);
> +
> +	clk_disable_unprepare(wdt->core_clk);
> +	clk_disable_unprepare(wdt->apb_clk);
> +	pm_runtime_disable(wdt->dev);
> +
> +	return 0;
> +}
> +
> +static void starfive_wdt_shutdown(struct platform_device *dev)
> +{
> +	struct starfive_wdt *wdt = platform_get_drvdata(dev);
> +
> +	starfive_wdt_mask_and_disable_reset(wdt, true);
> +
> +	starfive_wdt_pm_stop(&wdt->wdt_device);
> +}
> +
> +#ifdef CONFIG_PM_SLEEP
> +static int starfive_wdt_suspend(struct device *dev)
> +{
> +	int ret;
> +	struct starfive_wdt *wdt = dev_get_drvdata(dev);
> +
> +	starfive_wdt_unlock(wdt);
> +
> +	/* Save watchdog state, and turn it off. */
> +	wdt->reload = starfive_wdt_get_count(wdt);
> +
> +	starfive_wdt_mask_and_disable_reset(wdt, true);
> +
> +	/* Note that WTCNT doesn't need to be saved. */
> +	starfive_wdt_stop(&wdt->wdt_device);
> +	pm_runtime_force_suspend(dev);
> +
> +	starfive_wdt_lock(wdt);
> +
> +	return 0;
> +}
> +
> +static int starfive_wdt_resume(struct device *dev)
> +{
> +	int ret;
> +	struct starfive_wdt *wdt = dev_get_drvdata(dev);
> +
> +	starfive_wdt_unlock(wdt);
> +
> +	pm_runtime_force_resume(dev);
> +
> +	/* Restore watchdog state. */
> +	starfive_wdt_set_reload_count(wdt, wdt->reload);
> +
> +	starfive_wdt_restart(&wdt->wdt_device, 0, NULL);

I do not understand this call. Per its definition it is a restart handler,
supposed to restart the hardware. Why would anyone want to restart the
system on resume ?

> +
> +	starfive_wdt_mask_and_disable_reset(wdt, false);
> +
> +	starfive_wdt_lock(wdt);
> +
> +	return 0;
> +}
> +#endif /* CONFIG_PM_SLEEP */
> +
> +#ifdef CONFIG_PM
> +static int starfive_wdt_runtime_suspend(struct device *dev)
> +{
> +	struct starfive_wdt *wdt = dev_get_drvdata(dev);
> +
> +	clk_disable_unprepare(wdt->apb_clk);
> +	clk_disable_unprepare(wdt->core_clk);
> +
> +	return 0;
> +}
> +
> +static int starfive_wdt_runtime_resume(struct device *dev)
> +{
> +	struct starfive_wdt *wdt = dev_get_drvdata(dev);
> +	int ret;
> +
> +	ret = clk_prepare_enable(wdt->apb_clk);
> +	if (ret) {
> +		dev_err(wdt->dev, "failed to enable apb_clk.\n");
> +		return ret;
> +	}
> +
> +	ret = clk_prepare_enable(wdt->core_clk);
> +	if (ret)
> +		dev_err(wdt->dev, "failed to enable core_clk.\n");
> +
> +	return ret;
> +}
> +#endif /* CONFIG_PM */
> +
> +static const struct dev_pm_ops starfive_wdt_pm_ops = {
> +	SET_RUNTIME_PM_OPS(starfive_wdt_runtime_suspend, starfive_wdt_runtime_resume, NULL)
> +	SET_SYSTEM_SLEEP_PM_OPS(starfive_wdt_suspend, starfive_wdt_resume)
> +};
> +
> +static struct platform_driver starfive_wdt_driver = {
> +	.probe		= starfive_wdt_probe,
> +	.remove		= starfive_wdt_remove,
> +	.shutdown	= starfive_wdt_shutdown,
> +	.id_table	= starfive_wdt_ids,
> +	.driver		= {
> +		.name	= "starfive-wdt",
> +		.pm	= &starfive_wdt_pm_ops,
> +		.of_match_table = of_match_ptr(starfive_wdt_match),
> +	},
> +};
> +
> +module_platform_driver(starfive_wdt_driver);
> +
> +MODULE_AUTHOR("Xingyu Wu <xingyu.wu@starfivetech.com>");
> +MODULE_AUTHOR("Samin Guo <samin.guo@starfivetech.com>");
> +MODULE_DESCRIPTION("StarFive Watchdog Device Driver");
> +MODULE_LICENSE("GPL v2");
Xingyu Wu Feb. 10, 2023, 7:01 a.m. UTC | #3
On 2023/2/2 6:46, Guenter Roeck wrote:
> On Mon, Dec 19, 2022 at 05:42:32PM +0800, Xingyu Wu wrote:
>> Add watchdog driver for the StarFive JH7110 SoC.
>> 
>> Signed-off-by: Xingyu Wu <xingyu.wu@starfivetech.com>
> 
> This driver is almost impossible for me to review. There is a lot of code
> which doesn't make sense to me. I'll outline some of it below, but this is
> by far not a complete review.

Thanks for your review. It is enough complete and useful.

> 
>>[...]
>> +
>> +#include <linux/clk.h>
>> +#include <linux/delay.h>
>> +#include <linux/err.h>
>> +#include <linux/interrupt.h>
>> +#include <linux/io.h>
>> +#include <linux/iopoll.h>
>> +#include <linux/module.h>
>> +#include <linux/moduleparam.h>
>> +#include <linux/of.h>
>> +#include <linux/of_device.h>
>> +#include <linux/platform_device.h>
>> +#include <linux/pm_runtime.h>
>> +#include <linux/reset.h>
>> +#include <linux/reset-controller.h>
>> +#include <linux/slab.h>
>> +#include <linux/timer.h>
>> +#include <linux/types.h>
>> +#include <linux/uaccess.h>
>> +#include <linux/watchdog.h>
> 
> Several of those include files are unnecessary.

Will drop it.

> 
>> [...]
>> +
>> +static bool nowayout = WATCHDOG_NOWAYOUT;
>> +static int tmr_margin;
>> +static int tmr_atboot = STARFIVE_WDT_ATBOOT;
>> +static int soft_noboot;
>> +
>> +module_param(tmr_margin, int, 0);
>> +module_param(tmr_atboot, int, 0);
>> +module_param(nowayout, bool, 0);
>> +module_param(soft_noboot, int, 0);
>> +
>> +MODULE_PARM_DESC(tmr_margin, "Watchdog tmr_margin in seconds. (default="
>> +		 __MODULE_STRING(STARFIVE_WDT_DEFAULT_TIME) ")");
> 
> Use "timeout" or "heartbeat".

Will fix.

> 
>> +MODULE_PARM_DESC(tmr_atboot,
>> +		 "Watchdog is started at boot time if set to 1, default="
>> +		 __MODULE_STRING(STARFIVE_WDT_ATBOOT));
> 
> Use "early_enable"

Will fix.

> 
>> +MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default="
>> +		 __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
>> +MODULE_PARM_DESC(soft_noboot,
>> +		 "Watchdog action, set to 1 to ignore reboots, 0 to reboot (default 0)");
> 
> I do not understand what this module parameter is supposed to be used for,
> and what the "soft_' prefix is supposed to mean.

This 'soft_noboot' means watchdog reset enabled status. If 'soft_noboot' is set to 1,
it means reset is disabled and do not reboot.Or 'reboot_disbled' instead? 

> 
>> [...]
>> +#ifdef CONFIG_OF
>> +/* Register bias in JH7110 */
>> +static const struct starfive_wdt_variant drv_data_jh7110 = {
>> +	.control = STARFIVE_WDT_JH7110_CONTROL,
>> +	.load = STARFIVE_WDT_JH7110_LOAD,
>> +	.enable = STARFIVE_WDT_JH7110_CONTROL,
>> +	.value = STARFIVE_WDT_JH7110_VALUE,
>> +	.int_clr = STARFIVE_WDT_JH7110_INTCLR,
>> +	.unlock = STARFIVE_WDT_JH7110_LOCK,
>> +	.unlock_key = STARFIVE_WDT_JH7110_UNLOCK_KEY,
>> +	.irq_is_raise = STARFIVE_WDT_JH7110_IMS,
>> +	.enrst_shift = STARFIVE_WDT_JH7110_RESEN_SHIFT,
>> +	.en_shift = STARFIVE_WDT_JH7110_EN_SHIFT,
>> +};
>> +
>> +static const struct of_device_id starfive_wdt_match[] = {
>> +	{ .compatible = "starfive,jh7110-wdt", .data = &drv_data_jh7110 },
>> +	{}
>> +};
>> +MODULE_DEVICE_TABLE(of, starfive_wdt_match);
>> +#endif
>> +
>> +static const struct platform_device_id starfive_wdt_ids[] = {
>> +	{
>> +		.name = "starfive-jh7110-wdt",
>> +		.driver_data = (unsigned long)&drv_data_jh7110,
> 
> This will fail to compile if CONFIG_OF=n.

Will drop '#ifdef CONFIG_OF'.

> 
>> +	},
>> +	{}
>> +};
>> +MODULE_DEVICE_TABLE(platform, starfive_wdt_ids);
>> +
>> +static int starfive_wdt_get_clock_rate(struct starfive_wdt *wdt)
>> +{
>> +	if (!IS_ERR(wdt->core_clk)) {
>> +		wdt->freq = clk_get_rate(wdt->core_clk);
> 
> wdt->freq can at least in theory be 0, which would
> result in a zero-divide crash later on.

Will add a check whether rate is 0 to avoid zero-divide crash.

> 
>> +		return 0;
>> +	}
>> +	dev_err(wdt->dev, "get clock rate failed.\n");
>> +
>> +	return -ENOENT;
> 
> The above code can not be reached.
> 
>> +}
>> +
>> +static int starfive_wdt_enable_clock(struct starfive_wdt *wdt)
>> +{
>> +	int ret = 0;
>> +
>> +	wdt->apb_clk = devm_clk_get_enabled(wdt->dev, "apb");
>> +	if (IS_ERR(wdt->apb_clk)) {
>> +		dev_err(wdt->dev, "failed to get and enable apb clock.\n");
>> +		ret = PTR_ERR(wdt->apb_clk);
>> +		return ret;
>> +	}
>> +
>> +	wdt->core_clk = devm_clk_get_enabled(wdt->dev, "core");
>> +	if (IS_ERR(wdt->core_clk)) {
>> +		dev_err(wdt->dev, "failed to get and enable core clock.\n");
>> +		ret = PTR_ERR(wdt->core_clk);
>> +	}
>> +
>> +	return ret;
>> +}
>> +
>> +static int starfive_wdt_reset_init(struct starfive_wdt *wdt)
>> +{
>> +	int ret = 0;
>> +
>> +	wdt->rsts = devm_reset_control_array_get_exclusive(wdt->dev);
>> +	if (!IS_ERR(wdt->rsts)) {
> 
> Error handling should come first, and return immediately.

Will change the order and return error first.

> 
>> +		ret = reset_control_deassert(wdt->rsts);
>> +		if (ret)
>> +			dev_err(wdt->dev, "failed to deassert rsts.\n");
>> +	} else {
>> +		dev_err(wdt->dev, "failed to get rsts error.\n");
>> +		ret = PTR_ERR(wdt->rsts);
>> +	}
>> +
>> +	return ret;
>> +}
>> [...]
>> +
>> +/* interrupt status whether has been raised from the counter */
>> +static bool starfive_wdt_raise_irq_status(struct starfive_wdt *wdt)
>> +{
>> +	return !!readl(wdt->base + wdt->drv_data->irq_is_raise);
>> +}
>> +
>> +static void starfive_wdt_int_clr(struct starfive_wdt *wdt)
>> +{
>> +	writel(STARFIVE_WDT_INTCLR, wdt->base + wdt->drv_data->int_clr);
>> +}
> 
> There is no explanation for this interrupt handling (or, rather,
> non-handling since there is no interrupt handler. What is the purpose
> of even having all this code ?

Because the watchdog raise an interrupt signal on the hardware when timeout,
although we do not use interrupt handler on the sorfware, but the watchdog
initialization or reload also need to clear the hardware interrupt signal.

> 
>> [...]
>> +
>> +static unsigned int starfive_wdt_max_timeout(struct starfive_wdt *wdt)
>> +{
>> +	return DIV_ROUND_UP(STARFIVE_WDT_MAXCNT, wdt->freq) - 1;
>> +}
> 
> For a frequency of 1 MHz, this results in a maximum timeout of 4294.
> 
> This value is then used in starfive_wdt_set_timeout(), but as
> (4294 * 1000000) / 2, which is then again compared against
> STARFIVE_WDT_MAXCNT. Somewhere this calculation is wrong.

Modify to 'DIV_ROUND_UP(STARFIVE_WDT_MAXCNT, (wdt->freq / 2)) - 1'.

> 
> [...]
>> +
>> +static int starfive_wdt_restart(struct watchdog_device *wdd, unsigned long action,
>> +				void *data)
>> +{
>> +	struct starfive_wdt *wdt = watchdog_get_drvdata(wdd);
>> +
>> +	spin_lock(&wdt->lock);
>> +	starfive_wdt_unlock(wdt);
>> +	/* disable watchdog, to be safe */
>> +	starfive_wdt_disable(wdt);
>> +
>> +	if (soft_noboot)
>> +		starfive_wdt_disable_reset(wdt);
>> +	else
>> +		starfive_wdt_enable_reset(wdt);
>> +
> 
> This is a _restart_ handler. Disabling it doesn't make any sense.

Will drop 'starfive_wdt_disable_reset(wdt)' part.

> 
>> +	/* put native values into count */
>> +	starfive_wdt_set_count(wdt, wdt->count);
>> +
>> +	/* set the watchdog to go and reset */
>> +	starfive_wdt_int_clr(wdt);
>> +	starfive_wdt_enable(wdt);
>> +
>> +	starfive_wdt_lock(wdt);
>> +	spin_unlock(&wdt->lock);
>> +
>> +	return 0;
>> +}
>> +
>> +static int starfive_wdt_set_timeout(struct watchdog_device *wdd,
>> +				    unsigned int timeout)
>> +{
>> +	struct starfive_wdt *wdt = watchdog_get_drvdata(wdd);
>> +
>> +	unsigned long freq = wdt->freq;
>> +	unsigned int count;
>> +
>> +	spin_lock(&wdt->lock);
>> +
>> +	if (timeout < wdt->wdt_device.min_timeout)
>> +		return -EINVAL;
> 
> This is checked by the watchdog core.

Will drop it.

> 
>> +
>> +	/*
>> +	 * This watchdog takes twice timeouts to reset.
>> +	 * In order to reduce time to reset, should set half count value.
>> +	 */
>> +	count = timeout * freq / 2;
>> +
>> +	if (count > STARFIVE_WDT_MAXCNT) {
> 
> count is an unsigned int, which is pretty much everywhere a 32-bit
> value. STARFIVE_WDT_MAXCNT is 0xffffffff. How is an unsigned integer
> ever supposed to be larger than 0xffffffff ?
> 
>> +		dev_warn(wdt->dev, "timeout %d too big,use the MAX-timeout set.\n",
>> +			 timeout);
>> +		timeout = starfive_wdt_max_timeout(wdt);
>> +		count = timeout * freq;
> 
> This is confusing. First, the timeout range is checked by the calling code,
> which makes sure it is never larger than max_timeout. max_timeout is
> set to the value returned by starfive_wdt_max_timeout().
> Thus, count = timeout * freq / 2 will _never_ be larger than
> STARFIVE_WDT_MAXCNT. Even if it ever was, it doesn't make sense
> to use a count value of timeout * freq in that case, ie a value which
> could be twice as large as the supposed maximum value.

Change 'count' type to 'u64'. And if 'count' is larger than STARFIVE_WDT_MAXCNT,
'count' is equal to STARFIVE_WDT_MAXCNT. Does that seem OK?

> 
>> +	}
>> +
>> +	dev_info(wdt->dev, "Heartbeat: timeout=%d, count/2=%d (%08x)\n",
>> +		 timeout, count, count);
> 
> No. Drop such noise. Make it a debug message if you think you need it.

Will modify it to 'dev_dbg'.

> 
>> +
>> +	starfive_wdt_unlock(wdt);
>> +	starfive_wdt_disable(wdt);
>> +	starfive_wdt_set_reload_count(wdt, count);
>> +	starfive_wdt_enable(wdt);
>> +	starfive_wdt_lock(wdt);
>> +
>> +	wdt->count = count;
>> +	wdd->timeout = timeout;
>> +
>> +	spin_unlock(&wdt->lock);
>> +
>> +	return 0;
>> +}
>> +
>> +#define OPTIONS (WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE)
>> +
>> +static const struct watchdog_info starfive_wdt_ident = {
>> +	.options = OPTIONS,
>> +	.firmware_version = 0,
> 
> It is not necessary to initilize a static variable with 0.

Will drop '0'.

> 
>> +	.identity = "StarFive Watchdog",
>> +};
>> +
>> +static const struct watchdog_ops starfive_wdt_ops = {
>> +	.owner = THIS_MODULE,
>> +	.start = starfive_wdt_start,
>> +	.stop = starfive_wdt_pm_stop,
>> +	.ping = starfive_wdt_keepalive,
>> +	.set_timeout = starfive_wdt_set_timeout,
>> +	.restart = starfive_wdt_restart,
>> +	.get_timeleft = starfive_wdt_get_timeleft,
>> +};
>> +
>> +static const struct watchdog_device starfive_wdd = {
>> +	.info = &starfive_wdt_ident,
>> +	.ops = &starfive_wdt_ops,
>> +	.timeout = STARFIVE_WDT_DEFAULT_TIME,
>> +};
>> +
>> +static inline const struct starfive_wdt_variant *
>> +starfive_wdt_get_drv_data(struct platform_device *pdev)
>> +{
>> +	const struct starfive_wdt_variant *variant;
>> +
>> +	variant = of_device_get_match_data(&pdev->dev);
>> +	if (!variant) {
>> +		/* Device matched by platform_device_id */
>> +		variant = (struct starfive_wdt_variant *)
>> +			   platform_get_device_id(pdev)->driver_data;
>> +	}
>> +
>> +	return variant;
>> +}
>> +
>> +static int starfive_wdt_probe(struct platform_device *pdev)
>> +{
>> +	struct device *dev = &pdev->dev;
>> +	struct starfive_wdt *wdt;
>> +	int started = 0;
> 
> What is this variable supposed to be used for ? It is alway 0.

This variable is used to switch for debugging whether to allow the watchdog
to be started at boot time by driver. I think I should remove it.

> 
>> [...]
>> +
>> +	if (tmr_atboot && started == 0) {
>> +		starfive_wdt_start(&wdt->wdt_device);
>> +	} else if (!tmr_atboot) {
>> +		/*
>> +		 *if we're not enabling the watchdog, then ensure it is
>> +		 * disabled if it has been left running from the bootloader
>> +		 * or other source.
>> +		 */
>> +		starfive_wdt_stop(&wdt->wdt_device);
> 
> If it _is_ running from the boot loader, the watchdog core is not
> informed about it. If it is started here, it is not informed either.
> This is unusual and will need to be explained.
> Why ?

Is is okay to remove the 'started'?

> 
>> +	}
>> +
>> +#ifdef CONFIG_PM
>> +	clk_disable_unprepare(wdt->core_clk);
>> +	clk_disable_unprepare(wdt->apb_clk);
>> +#endif
> 
> I do not understand the above code. Why stop the watchdog if CONFIG_PM
> is enabled, even if it is supposed to be running ?

There misses a check about 'early_enable' and add 'if (!early_enable)'.
There means that disable clock when watchdog sleep and CONFIG_PM is enable.
Then enable clock when watchdog work by 'starfive_wdt_runtime_resume' function.

> 
>> +
>> +	platform_set_drvdata(pdev, wdt);
>> +
>> +	return 0;
>> +
>> +err_clk_disable:
>> +	clk_disable_unprepare(wdt->core_clk);
>> +	clk_disable_unprepare(wdt->apb_clk);
>> +
>> +	return ret;
>> +}
>> +
>> +static int starfive_wdt_remove(struct platform_device *dev)
>> +{
>> +	struct starfive_wdt *wdt = platform_get_drvdata(dev);
>> +
>> +	starfive_wdt_mask_and_disable_reset(wdt, true);
>> +	watchdog_unregister_device(&wdt->wdt_device);
>> +
>> +	clk_disable_unprepare(wdt->core_clk);
>> +	clk_disable_unprepare(wdt->apb_clk);
>> +	pm_runtime_disable(wdt->dev);
>> +
>> +	return 0;
>> +}
>> +
>> +static void starfive_wdt_shutdown(struct platform_device *dev)
>> +{
>> +	struct starfive_wdt *wdt = platform_get_drvdata(dev);
>> +
>> +	starfive_wdt_mask_and_disable_reset(wdt, true);
>> +
>> +	starfive_wdt_pm_stop(&wdt->wdt_device);
>> +}
>> +
>> +#ifdef CONFIG_PM_SLEEP
>> +static int starfive_wdt_suspend(struct device *dev)
>> +{
>> +	int ret;
>> +	struct starfive_wdt *wdt = dev_get_drvdata(dev);
>> +
>> +	starfive_wdt_unlock(wdt);
>> +
>> +	/* Save watchdog state, and turn it off. */
>> +	wdt->reload = starfive_wdt_get_count(wdt);
>> +
>> +	starfive_wdt_mask_and_disable_reset(wdt, true);
>> +
>> +	/* Note that WTCNT doesn't need to be saved. */
>> +	starfive_wdt_stop(&wdt->wdt_device);
>> +	pm_runtime_force_suspend(dev);
>> +
>> +	starfive_wdt_lock(wdt);
>> +
>> +	return 0;
>> +}
>> +
>> +static int starfive_wdt_resume(struct device *dev)
>> +{
>> +	int ret;
>> +	struct starfive_wdt *wdt = dev_get_drvdata(dev);
>> +
>> +	starfive_wdt_unlock(wdt);
>> +
>> +	pm_runtime_force_resume(dev);
>> +
>> +	/* Restore watchdog state. */
>> +	starfive_wdt_set_reload_count(wdt, wdt->reload);
>> +
>> +	starfive_wdt_restart(&wdt->wdt_device, 0, NULL);
> 
> I do not understand this call. Per its definition it is a restart handler,
> supposed to restart the hardware. Why would anyone want to restart the
> system on resume ?

The watchdog start counting from 'count' to 0 on everytime resume like a restart.
So I directly use a restart.

> 
>> +
>> +	starfive_wdt_mask_and_disable_reset(wdt, false);
>> +
>> +	starfive_wdt_lock(wdt);
>> +
>> +	return 0;
>> +}
>> +#endif /* CONFIG_PM_SLEEP */
>> +
>> +#ifdef CONFIG_PM
>> +static int starfive_wdt_runtime_suspend(struct device *dev)
>> +{
>> +	struct starfive_wdt *wdt = dev_get_drvdata(dev);
>> +
>> +	clk_disable_unprepare(wdt->apb_clk);
>> +	clk_disable_unprepare(wdt->core_clk);
>> +
>> +	return 0;
>> +}
>> +
>> +static int starfive_wdt_runtime_resume(struct device *dev)
>> +{
>> +	struct starfive_wdt *wdt = dev_get_drvdata(dev);
>> +	int ret;
>> +
>> +	ret = clk_prepare_enable(wdt->apb_clk);
>> +	if (ret) {
>> +		dev_err(wdt->dev, "failed to enable apb_clk.\n");
>> +		return ret;
>> +	}
>> +
>> +	ret = clk_prepare_enable(wdt->core_clk);
>> +	if (ret)
>> +		dev_err(wdt->dev, "failed to enable core_clk.\n");
>> +
>> +	return ret;
>> +}
>> +#endif /* CONFIG_PM */
>> +
>> +static const struct dev_pm_ops starfive_wdt_pm_ops = {
>> +	SET_RUNTIME_PM_OPS(starfive_wdt_runtime_suspend, starfive_wdt_runtime_resume, NULL)
>> +	SET_SYSTEM_SLEEP_PM_OPS(starfive_wdt_suspend, starfive_wdt_resume)
>> +};
>> +
>> +static struct platform_driver starfive_wdt_driver = {
>> +	.probe		= starfive_wdt_probe,
>> +	.remove		= starfive_wdt_remove,
>> +	.shutdown	= starfive_wdt_shutdown,
>> +	.id_table	= starfive_wdt_ids,
>> +	.driver		= {
>> +		.name	= "starfive-wdt",
>> +		.pm	= &starfive_wdt_pm_ops,
>> +		.of_match_table = of_match_ptr(starfive_wdt_match),
>> +	},
>> +};
>> +
>> +module_platform_driver(starfive_wdt_driver);
>> +
>> +MODULE_AUTHOR("Xingyu Wu <xingyu.wu@starfivetech.com>");
>> +MODULE_AUTHOR("Samin Guo <samin.guo@starfivetech.com>");
>> +MODULE_DESCRIPTION("StarFive Watchdog Device Driver");
>> +MODULE_LICENSE("GPL v2");


Thank for your review, I will modify this according to your suggestions.

Best regards,
Xingyu Wu
Guenter Roeck Feb. 10, 2023, 3:28 p.m. UTC | #4
On 2/9/23 23:01, Xingyu Wu wrote:
> On 2023/2/2 6:46, Guenter Roeck wrote:
>> On Mon, Dec 19, 2022 at 05:42:32PM +0800, Xingyu Wu wrote:
>>> Add watchdog driver for the StarFive JH7110 SoC.
>>>
>>> Signed-off-by: Xingyu Wu <xingyu.wu@starfivetech.com>
>>
>> This driver is almost impossible for me to review. There is a lot of code
>> which doesn't make sense to me. I'll outline some of it below, but this is
>> by far not a complete review.
> 
> Thanks for your review. It is enough complete and useful.
> 
>>
>>> [...]
>>> +
>>> +#include <linux/clk.h>
>>> +#include <linux/delay.h>
>>> +#include <linux/err.h>
>>> +#include <linux/interrupt.h>
>>> +#include <linux/io.h>
>>> +#include <linux/iopoll.h>
>>> +#include <linux/module.h>
>>> +#include <linux/moduleparam.h>
>>> +#include <linux/of.h>
>>> +#include <linux/of_device.h>
>>> +#include <linux/platform_device.h>
>>> +#include <linux/pm_runtime.h>
>>> +#include <linux/reset.h>
>>> +#include <linux/reset-controller.h>
>>> +#include <linux/slab.h>
>>> +#include <linux/timer.h>
>>> +#include <linux/types.h>
>>> +#include <linux/uaccess.h>
>>> +#include <linux/watchdog.h>
>>
>> Several of those include files are unnecessary.
> 
> Will drop it.
> 
>>
>>> [...]
>>> +
>>> +static bool nowayout = WATCHDOG_NOWAYOUT;
>>> +static int tmr_margin;
>>> +static int tmr_atboot = STARFIVE_WDT_ATBOOT;
>>> +static int soft_noboot;
>>> +
>>> +module_param(tmr_margin, int, 0);
>>> +module_param(tmr_atboot, int, 0);
>>> +module_param(nowayout, bool, 0);
>>> +module_param(soft_noboot, int, 0);
>>> +
>>> +MODULE_PARM_DESC(tmr_margin, "Watchdog tmr_margin in seconds. (default="
>>> +		 __MODULE_STRING(STARFIVE_WDT_DEFAULT_TIME) ")");
>>
>> Use "timeout" or "heartbeat".
> 
> Will fix.
> 
>>
>>> +MODULE_PARM_DESC(tmr_atboot,
>>> +		 "Watchdog is started at boot time if set to 1, default="
>>> +		 __MODULE_STRING(STARFIVE_WDT_ATBOOT));
>>
>> Use "early_enable"
> 
> Will fix.
> 
>>
>>> +MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default="
>>> +		 __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
>>> +MODULE_PARM_DESC(soft_noboot,
>>> +		 "Watchdog action, set to 1 to ignore reboots, 0 to reboot (default 0)");
>>
>> I do not understand what this module parameter is supposed to be used for,
>> and what the "soft_' prefix is supposed to mean.
> 
> This 'soft_noboot' means watchdog reset enabled status. If 'soft_noboot' is set to 1,
> it means reset is disabled and do not reboot.Or 'reboot_disbled' instead?
> 

That means it does nothing ? Why load the watchdog in the first place then ?

>>
>>> [...]
>>> +#ifdef CONFIG_OF
>>> +/* Register bias in JH7110 */
>>> +static const struct starfive_wdt_variant drv_data_jh7110 = {
>>> +	.control = STARFIVE_WDT_JH7110_CONTROL,
>>> +	.load = STARFIVE_WDT_JH7110_LOAD,
>>> +	.enable = STARFIVE_WDT_JH7110_CONTROL,
>>> +	.value = STARFIVE_WDT_JH7110_VALUE,
>>> +	.int_clr = STARFIVE_WDT_JH7110_INTCLR,
>>> +	.unlock = STARFIVE_WDT_JH7110_LOCK,
>>> +	.unlock_key = STARFIVE_WDT_JH7110_UNLOCK_KEY,
>>> +	.irq_is_raise = STARFIVE_WDT_JH7110_IMS,
>>> +	.enrst_shift = STARFIVE_WDT_JH7110_RESEN_SHIFT,
>>> +	.en_shift = STARFIVE_WDT_JH7110_EN_SHIFT,
>>> +};
>>> +
>>> +static const struct of_device_id starfive_wdt_match[] = {
>>> +	{ .compatible = "starfive,jh7110-wdt", .data = &drv_data_jh7110 },
>>> +	{}
>>> +};
>>> +MODULE_DEVICE_TABLE(of, starfive_wdt_match);
>>> +#endif
>>> +
>>> +static const struct platform_device_id starfive_wdt_ids[] = {
>>> +	{
>>> +		.name = "starfive-jh7110-wdt",
>>> +		.driver_data = (unsigned long)&drv_data_jh7110,
>>
>> This will fail to compile if CONFIG_OF=n.
> 
> Will drop '#ifdef CONFIG_OF'.
> 
>>
>>> +	},
>>> +	{}
>>> +};
>>> +MODULE_DEVICE_TABLE(platform, starfive_wdt_ids);
>>> +
>>> +static int starfive_wdt_get_clock_rate(struct starfive_wdt *wdt)
>>> +{
>>> +	if (!IS_ERR(wdt->core_clk)) {
>>> +		wdt->freq = clk_get_rate(wdt->core_clk);
>>
>> wdt->freq can at least in theory be 0, which would
>> result in a zero-divide crash later on.
> 
> Will add a check whether rate is 0 to avoid zero-divide crash.
> 
>>
>>> +		return 0;
>>> +	}
>>> +	dev_err(wdt->dev, "get clock rate failed.\n");
>>> +
>>> +	return -ENOENT;
>>
>> The above code can not be reached.
>>
>>> +}
>>> +
>>> +static int starfive_wdt_enable_clock(struct starfive_wdt *wdt)
>>> +{
>>> +	int ret = 0;
>>> +
>>> +	wdt->apb_clk = devm_clk_get_enabled(wdt->dev, "apb");
>>> +	if (IS_ERR(wdt->apb_clk)) {
>>> +		dev_err(wdt->dev, "failed to get and enable apb clock.\n");
>>> +		ret = PTR_ERR(wdt->apb_clk);
>>> +		return ret;
>>> +	}
>>> +
>>> +	wdt->core_clk = devm_clk_get_enabled(wdt->dev, "core");
>>> +	if (IS_ERR(wdt->core_clk)) {
>>> +		dev_err(wdt->dev, "failed to get and enable core clock.\n");
>>> +		ret = PTR_ERR(wdt->core_clk);
>>> +	}
>>> +
>>> +	return ret;
>>> +}
>>> +
>>> +static int starfive_wdt_reset_init(struct starfive_wdt *wdt)
>>> +{
>>> +	int ret = 0;
>>> +
>>> +	wdt->rsts = devm_reset_control_array_get_exclusive(wdt->dev);
>>> +	if (!IS_ERR(wdt->rsts)) {
>>
>> Error handling should come first, and return immediately.
> 
> Will change the order and return error first.
> 
>>
>>> +		ret = reset_control_deassert(wdt->rsts);
>>> +		if (ret)
>>> +			dev_err(wdt->dev, "failed to deassert rsts.\n");
>>> +	} else {
>>> +		dev_err(wdt->dev, "failed to get rsts error.\n");
>>> +		ret = PTR_ERR(wdt->rsts);
>>> +	}
>>> +
>>> +	return ret;
>>> +}
>>> [...]
>>> +
>>> +/* interrupt status whether has been raised from the counter */
>>> +static bool starfive_wdt_raise_irq_status(struct starfive_wdt *wdt)
>>> +{
>>> +	return !!readl(wdt->base + wdt->drv_data->irq_is_raise);
>>> +}
>>> +
>>> +static void starfive_wdt_int_clr(struct starfive_wdt *wdt)
>>> +{
>>> +	writel(STARFIVE_WDT_INTCLR, wdt->base + wdt->drv_data->int_clr);
>>> +}
>>
>> There is no explanation for this interrupt handling (or, rather,
>> non-handling since there is no interrupt handler. What is the purpose
>> of even having all this code ?
> 
> Because the watchdog raise an interrupt signal on the hardware when timeout,
> although we do not use interrupt handler on the sorfware, but the watchdog
> initialization or reload also need to clear the hardware interrupt signal.
> 

That should be documented.

>>
>>> [...]
>>> +
>>> +static unsigned int starfive_wdt_max_timeout(struct starfive_wdt *wdt)
>>> +{
>>> +	return DIV_ROUND_UP(STARFIVE_WDT_MAXCNT, wdt->freq) - 1;
>>> +}
>>
>> For a frequency of 1 MHz, this results in a maximum timeout of 4294.
>>
>> This value is then used in starfive_wdt_set_timeout(), but as
>> (4294 * 1000000) / 2, which is then again compared against
>> STARFIVE_WDT_MAXCNT. Somewhere this calculation is wrong.
> 
> Modify to 'DIV_ROUND_UP(STARFIVE_WDT_MAXCNT, (wdt->freq / 2)) - 1'.
> 
>>
>> [...]
>>> +
>>> +static int starfive_wdt_restart(struct watchdog_device *wdd, unsigned long action,
>>> +				void *data)
>>> +{
>>> +	struct starfive_wdt *wdt = watchdog_get_drvdata(wdd);
>>> +
>>> +	spin_lock(&wdt->lock);
>>> +	starfive_wdt_unlock(wdt);
>>> +	/* disable watchdog, to be safe */
>>> +	starfive_wdt_disable(wdt);
>>> +
>>> +	if (soft_noboot)
>>> +		starfive_wdt_disable_reset(wdt);
>>> +	else
>>> +		starfive_wdt_enable_reset(wdt);
>>> +
>>
>> This is a _restart_ handler. Disabling it doesn't make any sense.
> 
> Will drop 'starfive_wdt_disable_reset(wdt)' part.
> 
>>
>>> +	/* put native values into count */
>>> +	starfive_wdt_set_count(wdt, wdt->count);
>>> +
>>> +	/* set the watchdog to go and reset */
>>> +	starfive_wdt_int_clr(wdt);
>>> +	starfive_wdt_enable(wdt);
>>> +
>>> +	starfive_wdt_lock(wdt);
>>> +	spin_unlock(&wdt->lock);
>>> +
>>> +	return 0;
>>> +}
>>> +
>>> +static int starfive_wdt_set_timeout(struct watchdog_device *wdd,
>>> +				    unsigned int timeout)
>>> +{
>>> +	struct starfive_wdt *wdt = watchdog_get_drvdata(wdd);
>>> +
>>> +	unsigned long freq = wdt->freq;
>>> +	unsigned int count;
>>> +
>>> +	spin_lock(&wdt->lock);
>>> +
>>> +	if (timeout < wdt->wdt_device.min_timeout)
>>> +		return -EINVAL;
>>
>> This is checked by the watchdog core.
> 
> Will drop it.
> 
>>
>>> +
>>> +	/*
>>> +	 * This watchdog takes twice timeouts to reset.
>>> +	 * In order to reduce time to reset, should set half count value.
>>> +	 */
>>> +	count = timeout * freq / 2;
>>> +
>>> +	if (count > STARFIVE_WDT_MAXCNT) {
>>
>> count is an unsigned int, which is pretty much everywhere a 32-bit
>> value. STARFIVE_WDT_MAXCNT is 0xffffffff. How is an unsigned integer
>> ever supposed to be larger than 0xffffffff ?
>>
>>> +		dev_warn(wdt->dev, "timeout %d too big,use the MAX-timeout set.\n",
>>> +			 timeout);
>>> +		timeout = starfive_wdt_max_timeout(wdt);
>>> +		count = timeout * freq;
>>
>> This is confusing. First, the timeout range is checked by the calling code,
>> which makes sure it is never larger than max_timeout. max_timeout is
>> set to the value returned by starfive_wdt_max_timeout().
>> Thus, count = timeout * freq / 2 will _never_ be larger than
>> STARFIVE_WDT_MAXCNT. Even if it ever was, it doesn't make sense
>> to use a count value of timeout * freq in that case, ie a value which
>> could be twice as large as the supposed maximum value.
> 
> Change 'count' type to 'u64'. And if 'count' is larger than STARFIVE_WDT_MAXCNT,
> 'count' is equal to STARFIVE_WDT_MAXCNT. Does that seem OK?
> 

That would not change anything. This is not about overflows; I would
have mentioned that. count can still never be larger than STARFIVE_WDT_MAXCNT.
Please do the math.

>>
>>> +	}
>>> +
>>> +	dev_info(wdt->dev, "Heartbeat: timeout=%d, count/2=%d (%08x)\n",
>>> +		 timeout, count, count);
>>
>> No. Drop such noise. Make it a debug message if you think you need it.
> 
> Will modify it to 'dev_dbg'.
> 
>>
>>> +
>>> +	starfive_wdt_unlock(wdt);
>>> +	starfive_wdt_disable(wdt);
>>> +	starfive_wdt_set_reload_count(wdt, count);
>>> +	starfive_wdt_enable(wdt);
>>> +	starfive_wdt_lock(wdt);
>>> +
>>> +	wdt->count = count;
>>> +	wdd->timeout = timeout;
>>> +
>>> +	spin_unlock(&wdt->lock);
>>> +
>>> +	return 0;
>>> +}
>>> +
>>> +#define OPTIONS (WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE)
>>> +
>>> +static const struct watchdog_info starfive_wdt_ident = {
>>> +	.options = OPTIONS,
>>> +	.firmware_version = 0,
>>
>> It is not necessary to initilize a static variable with 0.
> 
> Will drop '0'.
> 
>>
>>> +	.identity = "StarFive Watchdog",
>>> +};
>>> +
>>> +static const struct watchdog_ops starfive_wdt_ops = {
>>> +	.owner = THIS_MODULE,
>>> +	.start = starfive_wdt_start,
>>> +	.stop = starfive_wdt_pm_stop,
>>> +	.ping = starfive_wdt_keepalive,
>>> +	.set_timeout = starfive_wdt_set_timeout,
>>> +	.restart = starfive_wdt_restart,
>>> +	.get_timeleft = starfive_wdt_get_timeleft,
>>> +};
>>> +
>>> +static const struct watchdog_device starfive_wdd = {
>>> +	.info = &starfive_wdt_ident,
>>> +	.ops = &starfive_wdt_ops,
>>> +	.timeout = STARFIVE_WDT_DEFAULT_TIME,
>>> +};
>>> +
>>> +static inline const struct starfive_wdt_variant *
>>> +starfive_wdt_get_drv_data(struct platform_device *pdev)
>>> +{
>>> +	const struct starfive_wdt_variant *variant;
>>> +
>>> +	variant = of_device_get_match_data(&pdev->dev);
>>> +	if (!variant) {
>>> +		/* Device matched by platform_device_id */
>>> +		variant = (struct starfive_wdt_variant *)
>>> +			   platform_get_device_id(pdev)->driver_data;
>>> +	}
>>> +
>>> +	return variant;
>>> +}
>>> +
>>> +static int starfive_wdt_probe(struct platform_device *pdev)
>>> +{
>>> +	struct device *dev = &pdev->dev;
>>> +	struct starfive_wdt *wdt;
>>> +	int started = 0;
>>
>> What is this variable supposed to be used for ? It is alway 0.
> 
> This variable is used to switch for debugging whether to allow the watchdog
> to be started at boot time by driver. I think I should remove it.
> 
>>
>>> [...]
>>> +
>>> +	if (tmr_atboot && started == 0) {
>>> +		starfive_wdt_start(&wdt->wdt_device);
>>> +	} else if (!tmr_atboot) {
>>> +		/*
>>> +		 *if we're not enabling the watchdog, then ensure it is
>>> +		 * disabled if it has been left running from the bootloader
>>> +		 * or other source.
>>> +		 */
>>> +		starfive_wdt_stop(&wdt->wdt_device);
>>
>> If it _is_ running from the boot loader, the watchdog core is not
>> informed about it. If it is started here, it is not informed either.
>> This is unusual and will need to be explained.
>> Why ?
> 
> Is is okay to remove the 'started'?
> 
Yes, though of course it would be better if the watchdog is kept running
in that situation and the watchdog core is informed about it. Also,
the watchdog core is still not informed that the watchdog is running
(i.e., WDOG_HW_RUNNING is not set) when it is explicitly started.

>>
>>> +	}
>>> +
>>> +#ifdef CONFIG_PM
>>> +	clk_disable_unprepare(wdt->core_clk);
>>> +	clk_disable_unprepare(wdt->apb_clk);
>>> +#endif
>>
>> I do not understand the above code. Why stop the watchdog if CONFIG_PM
>> is enabled, even if it is supposed to be running ?
> 
> There misses a check about 'early_enable' and add 'if (!early_enable)'.
> There means that disable clock when watchdog sleep and CONFIG_PM is enable.
> Then enable clock when watchdog work by 'starfive_wdt_runtime_resume' function.
> 

I am quite sure that you are supposed to use pm functions for that purpose,
such as pm_runtime_get_sync(), pm_runtime_put_sync(), and pm_runtime_enable(),
similar to the code in omap_wdt.c.

>>
>>> +
>>> +	platform_set_drvdata(pdev, wdt);
>>> +
>>> +	return 0;
>>> +
>>> +err_clk_disable:
>>> +	clk_disable_unprepare(wdt->core_clk);
>>> +	clk_disable_unprepare(wdt->apb_clk);
>>> +
>>> +	return ret;
>>> +}
>>> +
>>> +static int starfive_wdt_remove(struct platform_device *dev)
>>> +{
>>> +	struct starfive_wdt *wdt = platform_get_drvdata(dev);
>>> +
>>> +	starfive_wdt_mask_and_disable_reset(wdt, true);
>>> +	watchdog_unregister_device(&wdt->wdt_device);
>>> +
>>> +	clk_disable_unprepare(wdt->core_clk);
>>> +	clk_disable_unprepare(wdt->apb_clk);
>>> +	pm_runtime_disable(wdt->dev);
>>> +
>>> +	return 0;
>>> +}
>>> +
>>> +static void starfive_wdt_shutdown(struct platform_device *dev)
>>> +{
>>> +	struct starfive_wdt *wdt = platform_get_drvdata(dev);
>>> +
>>> +	starfive_wdt_mask_and_disable_reset(wdt, true);
>>> +
>>> +	starfive_wdt_pm_stop(&wdt->wdt_device);
>>> +}
>>> +
>>> +#ifdef CONFIG_PM_SLEEP
>>> +static int starfive_wdt_suspend(struct device *dev)
>>> +{
>>> +	int ret;
>>> +	struct starfive_wdt *wdt = dev_get_drvdata(dev);
>>> +
>>> +	starfive_wdt_unlock(wdt);
>>> +
>>> +	/* Save watchdog state, and turn it off. */
>>> +	wdt->reload = starfive_wdt_get_count(wdt);
>>> +
>>> +	starfive_wdt_mask_and_disable_reset(wdt, true);
>>> +
>>> +	/* Note that WTCNT doesn't need to be saved. */
>>> +	starfive_wdt_stop(&wdt->wdt_device);
>>> +	pm_runtime_force_suspend(dev);
>>> +
>>> +	starfive_wdt_lock(wdt);
>>> +
>>> +	return 0;
>>> +}
>>> +
>>> +static int starfive_wdt_resume(struct device *dev)
>>> +{
>>> +	int ret;
>>> +	struct starfive_wdt *wdt = dev_get_drvdata(dev);
>>> +
>>> +	starfive_wdt_unlock(wdt);
>>> +
>>> +	pm_runtime_force_resume(dev);
>>> +
>>> +	/* Restore watchdog state. */
>>> +	starfive_wdt_set_reload_count(wdt, wdt->reload);
>>> +
>>> +	starfive_wdt_restart(&wdt->wdt_device, 0, NULL);
>>
>> I do not understand this call. Per its definition it is a restart handler,
>> supposed to restart the hardware. Why would anyone want to restart the
>> system on resume ?
> 
> The watchdog start counting from 'count' to 0 on everytime resume like a restart.
> So I directly use a restart.
> 

That doesn't answer my question. The "restart" callback resets the hardware.
starfive_wdt_restart() is registered as restart handler, and thus expected
to reset the hardware. It it doesn't reset the hardware, it should not
register itself as restart handler. If it does restart the hardware, calling
it on resume would automatically reset the system on each resume.
Something is wrong here, and will have to be fixed.

I _suspect_ that you think that the restart callback is supposed to reset
the watchdog. That would be wrong. It resets (restarts) the hardware,
not the watchdog. Please read Documentation/watchdog/watchdog-kernel-api.rst
if there are questions about this callback.

Thanks,
Guenter

>>
>>> +
>>> +	starfive_wdt_mask_and_disable_reset(wdt, false);
>>> +
>>> +	starfive_wdt_lock(wdt);
>>> +
>>> +	return 0;
>>> +}
>>> +#endif /* CONFIG_PM_SLEEP */
>>> +
>>> +#ifdef CONFIG_PM
>>> +static int starfive_wdt_runtime_suspend(struct device *dev)
>>> +{
>>> +	struct starfive_wdt *wdt = dev_get_drvdata(dev);
>>> +
>>> +	clk_disable_unprepare(wdt->apb_clk);
>>> +	clk_disable_unprepare(wdt->core_clk);
>>> +
>>> +	return 0;
>>> +}
>>> +
>>> +static int starfive_wdt_runtime_resume(struct device *dev)
>>> +{
>>> +	struct starfive_wdt *wdt = dev_get_drvdata(dev);
>>> +	int ret;
>>> +
>>> +	ret = clk_prepare_enable(wdt->apb_clk);
>>> +	if (ret) {
>>> +		dev_err(wdt->dev, "failed to enable apb_clk.\n");
>>> +		return ret;
>>> +	}
>>> +
>>> +	ret = clk_prepare_enable(wdt->core_clk);
>>> +	if (ret)
>>> +		dev_err(wdt->dev, "failed to enable core_clk.\n");
>>> +
>>> +	return ret;
>>> +}
>>> +#endif /* CONFIG_PM */
>>> +
>>> +static const struct dev_pm_ops starfive_wdt_pm_ops = {
>>> +	SET_RUNTIME_PM_OPS(starfive_wdt_runtime_suspend, starfive_wdt_runtime_resume, NULL)
>>> +	SET_SYSTEM_SLEEP_PM_OPS(starfive_wdt_suspend, starfive_wdt_resume)
>>> +};
>>> +
>>> +static struct platform_driver starfive_wdt_driver = {
>>> +	.probe		= starfive_wdt_probe,
>>> +	.remove		= starfive_wdt_remove,
>>> +	.shutdown	= starfive_wdt_shutdown,
>>> +	.id_table	= starfive_wdt_ids,
>>> +	.driver		= {
>>> +		.name	= "starfive-wdt",
>>> +		.pm	= &starfive_wdt_pm_ops,
>>> +		.of_match_table = of_match_ptr(starfive_wdt_match),
>>> +	},
>>> +};
>>> +
>>> +module_platform_driver(starfive_wdt_driver);
>>> +
>>> +MODULE_AUTHOR("Xingyu Wu <xingyu.wu@starfivetech.com>");
>>> +MODULE_AUTHOR("Samin Guo <samin.guo@starfivetech.com>");
>>> +MODULE_DESCRIPTION("StarFive Watchdog Device Driver");
>>> +MODULE_LICENSE("GPL v2");
> 
> 
> Thank for your review, I will modify this according to your suggestions.
> 
> Best regards,
> Xingyu Wu
>
Xingyu Wu Feb. 13, 2023, 1:29 p.m. UTC | #5
On 2023/2/10 23:28, Guenter Roeck wrote:
> On 2/9/23 23:01, Xingyu Wu wrote:
>> On 2023/2/2 6:46, Guenter Roeck wrote:
>>> On Mon, Dec 19, 2022 at 05:42:32PM +0800, Xingyu Wu wrote:
>>>> Add watchdog driver for the StarFive JH7110 SoC.
>>>>
>>>> Signed-off-by: Xingyu Wu <xingyu.wu@starfivetech.com>
>>>
>
>[...]
>
>>>
>>>> +MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default="
>>>> +         __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
>>>> +MODULE_PARM_DESC(soft_noboot,
>>>> +         "Watchdog action, set to 1 to ignore reboots, 0 to reboot (default 0)");
>>>
>>> I do not understand what this module parameter is supposed to be used for,
>>> and what the "soft_' prefix is supposed to mean.
>>
>> This 'soft_noboot' means watchdog reset enabled status. If 'soft_noboot' is set to 1,
>> it means reset is disabled and do not reboot.Or 'reboot_disbled' instead?
>>
> 
> That means it does nothing ? Why load the watchdog in the first place then ?
> 

This feature is used for debugging, so user can check the counter repeatedly
without rebooting the system.

>[...]
>>>> +
>>>> +/* interrupt status whether has been raised from the counter */
>>>> +static bool starfive_wdt_raise_irq_status(struct starfive_wdt *wdt)
>>>> +{
>>>> +    return !!readl(wdt->base + wdt->drv_data->irq_is_raise);
>>>> +}
>>>> +
>>>> +static void starfive_wdt_int_clr(struct starfive_wdt *wdt)
>>>> +{
>>>> +    writel(STARFIVE_WDT_INTCLR, wdt->base + wdt->drv_data->int_clr);
>>>> +}
>>>
>>> There is no explanation for this interrupt handling (or, rather,
>>> non-handling since there is no interrupt handler. What is the purpose
>>> of even having all this code ?
>>
>> Because the watchdog raise an interrupt signal on the hardware when timeout,
>> although we do not use interrupt handler on the sorfware, but the watchdog
>> initialization or reload also need to clear the hardware interrupt signal.
>>
> 
> That should be documented.
> 

I will add that in the comments.

>
>[...]
>>>> +
>>>> +    /*
>>>> +     * This watchdog takes twice timeouts to reset.
>>>> +     * In order to reduce time to reset, should set half count value.
>>>> +     */
>>>> +    count = timeout * freq / 2;
>>>> +
>>>> +    if (count > STARFIVE_WDT_MAXCNT) {
>>>
>>> count is an unsigned int, which is pretty much everywhere a 32-bit
>>> value. STARFIVE_WDT_MAXCNT is 0xffffffff. How is an unsigned integer
>>> ever supposed to be larger than 0xffffffff ?
>>>
>>>> +        dev_warn(wdt->dev, "timeout %d too big,use the MAX-timeout set.\n",
>>>> +             timeout);
>>>> +        timeout = starfive_wdt_max_timeout(wdt);
>>>> +        count = timeout * freq;
>>>
>>> This is confusing. First, the timeout range is checked by the calling code,
>>> which makes sure it is never larger than max_timeout. max_timeout is
>>> set to the value returned by starfive_wdt_max_timeout().
>>> Thus, count = timeout * freq / 2 will _never_ be larger than
>>> STARFIVE_WDT_MAXCNT. Even if it ever was, it doesn't make sense
>>> to use a count value of timeout * freq in that case, ie a value which
>>> could be twice as large as the supposed maximum value.
>>
>> Change 'count' type to 'u64'. And if 'count' is larger than STARFIVE_WDT_MAXCNT,
>> 'count' is equal to STARFIVE_WDT_MAXCNT. Does that seem OK?
>>
> 
> That would not change anything. This is not about overflows; I would
> have mentioned that. count can still never be larger than STARFIVE_WDT_MAXCNT.
> Please do the math.
> 

I get your point. It has checked the 'count' before the ops of 'set_timeout' so
I check the 'count' uselessly in this. I will remove this.

>
>[...]
>>>> +
>>>> +    if (tmr_atboot && started == 0) {
>>>> +        starfive_wdt_start(&wdt->wdt_device);
>>>> +    } else if (!tmr_atboot) {
>>>> +        /*
>>>> +         *if we're not enabling the watchdog, then ensure it is
>>>> +         * disabled if it has been left running from the bootloader
>>>> +         * or other source.
>>>> +         */
>>>> +        starfive_wdt_stop(&wdt->wdt_device);
>>>
>>> If it _is_ running from the boot loader, the watchdog core is not
>>> informed about it. If it is started here, it is not informed either.
>>> This is unusual and will need to be explained.
>>> Why ?
>>
>> Is is okay to remove the 'started'?
>>
> Yes, though of course it would be better if the watchdog is kept running
> in that situation and the watchdog core is informed about it. Also,
> the watchdog core is still not informed that the watchdog is running
> (i.e., WDOG_HW_RUNNING is not set) when it is explicitly started.
> 

Will remove the 'started'.

>>>
>>>> +    }
>>>> +
>>>> +#ifdef CONFIG_PM
>>>> +    clk_disable_unprepare(wdt->core_clk);
>>>> +    clk_disable_unprepare(wdt->apb_clk);
>>>> +#endif
>>>
>>> I do not understand the above code. Why stop the watchdog if CONFIG_PM
>>> is enabled, even if it is supposed to be running ?
>>
>> There misses a check about 'early_enable' and add 'if (!early_enable)'.
>> There means that disable clock when watchdog sleep and CONFIG_PM is enable.
>> Then enable clock when watchdog work by 'starfive_wdt_runtime_resume' function.
>>
> 
> I am quite sure that you are supposed to use pm functions for that purpose,
> such as pm_runtime_get_sync(), pm_runtime_put_sync(), and pm_runtime_enable(),
> similar to the code in omap_wdt.c.
> 

I will use pm_runtime_get_sync() and pm_runtime_put_sync() to operate clocks.

>[...]
>>>> +#ifdef CONFIG_PM_SLEEP
>>>> +static int starfive_wdt_suspend(struct device *dev)
>>>> +{
>>>> +    int ret;
>>>> +    struct starfive_wdt *wdt = dev_get_drvdata(dev);
>>>> +
>>>> +    starfive_wdt_unlock(wdt);
>>>> +
>>>> +    /* Save watchdog state, and turn it off. */
>>>> +    wdt->reload = starfive_wdt_get_count(wdt);
>>>> +
>>>> +    starfive_wdt_mask_and_disable_reset(wdt, true);
>>>> +
>>>> +    /* Note that WTCNT doesn't need to be saved. */
>>>> +    starfive_wdt_stop(&wdt->wdt_device);
>>>> +    pm_runtime_force_suspend(dev);
>>>> +
>>>> +    starfive_wdt_lock(wdt);
>>>> +
>>>> +    return 0;
>>>> +}
>>>> +
>>>> +static int starfive_wdt_resume(struct device *dev)
>>>> +{
>>>> +    int ret;
>>>> +    struct starfive_wdt *wdt = dev_get_drvdata(dev);
>>>> +
>>>> +    starfive_wdt_unlock(wdt);
>>>> +
>>>> +    pm_runtime_force_resume(dev);
>>>> +
>>>> +    /* Restore watchdog state. */
>>>> +    starfive_wdt_set_reload_count(wdt, wdt->reload);
>>>> +
>>>> +    starfive_wdt_restart(&wdt->wdt_device, 0, NULL);
>>>
>>> I do not understand this call. Per its definition it is a restart handler,
>>> supposed to restart the hardware. Why would anyone want to restart the
>>> system on resume ?
>>
>> The watchdog start counting from 'count' to 0 on everytime resume like a restart.
>> So I directly use a restart.
>>
> 
> That doesn't answer my question. The "restart" callback resets the hardware.
> starfive_wdt_restart() is registered as restart handler, and thus expected
> to reset the hardware. It it doesn't reset the hardware, it should not
> register itself as restart handler. If it does restart the hardware, calling
> it on resume would automatically reset the system on each resume.
> Something is wrong here, and will have to be fixed.
> 
> I _suspect_ that you think that the restart callback is supposed to reset
> the watchdog. That would be wrong. It resets (restarts) the hardware,
> not the watchdog. Please read Documentation/watchdog/watchdog-kernel-api.rst
> if there are questions about this callback.
> 

Thanks you for reminding me. I finally understand that the restart callback is supposed
to reset the hardware not watchdog. This watchdog doesn't reset the hardware, and I will
remove that. By the way, if I don't need restart callback, would I still use the 
'watchdog_set_restart_priority' function? Thanks.

Best regards,
Xingyu Wu
Guenter Roeck Feb. 13, 2023, 3:26 p.m. UTC | #6
On 2/13/23 05:29, Xingyu Wu wrote:
> On 2023/2/10 23:28, Guenter Roeck wrote:
>> On 2/9/23 23:01, Xingyu Wu wrote:
>>> On 2023/2/2 6:46, Guenter Roeck wrote:
>>>> On Mon, Dec 19, 2022 at 05:42:32PM +0800, Xingyu Wu wrote:
>>>>> Add watchdog driver for the StarFive JH7110 SoC.
>>>>>
>>>>> Signed-off-by: Xingyu Wu <xingyu.wu@starfivetech.com>
>>>>
>>
>> [...]
>>
>>>>
>>>>> +MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default="
>>>>> +         __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
>>>>> +MODULE_PARM_DESC(soft_noboot,
>>>>> +         "Watchdog action, set to 1 to ignore reboots, 0 to reboot (default 0)");
>>>>
>>>> I do not understand what this module parameter is supposed to be used for,
>>>> and what the "soft_' prefix is supposed to mean.
>>>
>>> This 'soft_noboot' means watchdog reset enabled status. If 'soft_noboot' is set to 1,
>>> it means reset is disabled and do not reboot.Or 'reboot_disbled' instead?
>>>
>>
>> That means it does nothing ? Why load the watchdog in the first place then ?
>>
> 
> This feature is used for debugging, so user can check the counter repeatedly
> without rebooting the system.
> 

Debug options are not acceptable as module options. Please make it a define
if you think you need it.

>> [...]
>>>>> +
>>>>> +/* interrupt status whether has been raised from the counter */
>>>>> +static bool starfive_wdt_raise_irq_status(struct starfive_wdt *wdt)
>>>>> +{
>>>>> +    return !!readl(wdt->base + wdt->drv_data->irq_is_raise);
>>>>> +}
>>>>> +
>>>>> +static void starfive_wdt_int_clr(struct starfive_wdt *wdt)
>>>>> +{
>>>>> +    writel(STARFIVE_WDT_INTCLR, wdt->base + wdt->drv_data->int_clr);
>>>>> +}
>>>>
>>>> There is no explanation for this interrupt handling (or, rather,
>>>> non-handling since there is no interrupt handler. What is the purpose
>>>> of even having all this code ?
>>>
>>> Because the watchdog raise an interrupt signal on the hardware when timeout,
>>> although we do not use interrupt handler on the sorfware, but the watchdog
>>> initialization or reload also need to clear the hardware interrupt signal.
>>>
>>
>> That should be documented.
>>
> 
> I will add that in the comments.
> 
>>
>> [...]
>>>>> +
>>>>> +    /*
>>>>> +     * This watchdog takes twice timeouts to reset.
>>>>> +     * In order to reduce time to reset, should set half count value.
>>>>> +     */
>>>>> +    count = timeout * freq / 2;
>>>>> +
>>>>> +    if (count > STARFIVE_WDT_MAXCNT) {
>>>>
>>>> count is an unsigned int, which is pretty much everywhere a 32-bit
>>>> value. STARFIVE_WDT_MAXCNT is 0xffffffff. How is an unsigned integer
>>>> ever supposed to be larger than 0xffffffff ?
>>>>
>>>>> +        dev_warn(wdt->dev, "timeout %d too big,use the MAX-timeout set.\n",
>>>>> +             timeout);
>>>>> +        timeout = starfive_wdt_max_timeout(wdt);
>>>>> +        count = timeout * freq;
>>>>
>>>> This is confusing. First, the timeout range is checked by the calling code,
>>>> which makes sure it is never larger than max_timeout. max_timeout is
>>>> set to the value returned by starfive_wdt_max_timeout().
>>>> Thus, count = timeout * freq / 2 will _never_ be larger than
>>>> STARFIVE_WDT_MAXCNT. Even if it ever was, it doesn't make sense
>>>> to use a count value of timeout * freq in that case, ie a value which
>>>> could be twice as large as the supposed maximum value.
>>>
>>> Change 'count' type to 'u64'. And if 'count' is larger than STARFIVE_WDT_MAXCNT,
>>> 'count' is equal to STARFIVE_WDT_MAXCNT. Does that seem OK?
>>>
>>
>> That would not change anything. This is not about overflows; I would
>> have mentioned that. count can still never be larger than STARFIVE_WDT_MAXCNT.
>> Please do the math.
>>
> 
> I get your point. It has checked the 'count' before the ops of 'set_timeout' so
> I check the 'count' uselessly in this. I will remove this.
> 
>>
>> [...]
>>>>> +
>>>>> +    if (tmr_atboot && started == 0) {
>>>>> +        starfive_wdt_start(&wdt->wdt_device);
>>>>> +    } else if (!tmr_atboot) {
>>>>> +        /*
>>>>> +         *if we're not enabling the watchdog, then ensure it is
>>>>> +         * disabled if it has been left running from the bootloader
>>>>> +         * or other source.
>>>>> +         */
>>>>> +        starfive_wdt_stop(&wdt->wdt_device);
>>>>
>>>> If it _is_ running from the boot loader, the watchdog core is not
>>>> informed about it. If it is started here, it is not informed either.
>>>> This is unusual and will need to be explained.
>>>> Why ?
>>>
>>> Is is okay to remove the 'started'?
>>>
>> Yes, though of course it would be better if the watchdog is kept running
>> in that situation and the watchdog core is informed about it. Also,
>> the watchdog core is still not informed that the watchdog is running
>> (i.e., WDOG_HW_RUNNING is not set) when it is explicitly started.
>>
> 
> Will remove the 'started'.
> 
>>>>
>>>>> +    }
>>>>> +
>>>>> +#ifdef CONFIG_PM
>>>>> +    clk_disable_unprepare(wdt->core_clk);
>>>>> +    clk_disable_unprepare(wdt->apb_clk);
>>>>> +#endif
>>>>
>>>> I do not understand the above code. Why stop the watchdog if CONFIG_PM
>>>> is enabled, even if it is supposed to be running ?
>>>
>>> There misses a check about 'early_enable' and add 'if (!early_enable)'.
>>> There means that disable clock when watchdog sleep and CONFIG_PM is enable.
>>> Then enable clock when watchdog work by 'starfive_wdt_runtime_resume' function.
>>>
>>
>> I am quite sure that you are supposed to use pm functions for that purpose,
>> such as pm_runtime_get_sync(), pm_runtime_put_sync(), and pm_runtime_enable(),
>> similar to the code in omap_wdt.c.
>>
> 
> I will use pm_runtime_get_sync() and pm_runtime_put_sync() to operate clocks.
> 
>> [...]
>>>>> +#ifdef CONFIG_PM_SLEEP
>>>>> +static int starfive_wdt_suspend(struct device *dev)
>>>>> +{
>>>>> +    int ret;
>>>>> +    struct starfive_wdt *wdt = dev_get_drvdata(dev);
>>>>> +
>>>>> +    starfive_wdt_unlock(wdt);
>>>>> +
>>>>> +    /* Save watchdog state, and turn it off. */
>>>>> +    wdt->reload = starfive_wdt_get_count(wdt);
>>>>> +
>>>>> +    starfive_wdt_mask_and_disable_reset(wdt, true);
>>>>> +
>>>>> +    /* Note that WTCNT doesn't need to be saved. */
>>>>> +    starfive_wdt_stop(&wdt->wdt_device);
>>>>> +    pm_runtime_force_suspend(dev);
>>>>> +
>>>>> +    starfive_wdt_lock(wdt);
>>>>> +
>>>>> +    return 0;
>>>>> +}
>>>>> +
>>>>> +static int starfive_wdt_resume(struct device *dev)
>>>>> +{
>>>>> +    int ret;
>>>>> +    struct starfive_wdt *wdt = dev_get_drvdata(dev);
>>>>> +
>>>>> +    starfive_wdt_unlock(wdt);
>>>>> +
>>>>> +    pm_runtime_force_resume(dev);
>>>>> +
>>>>> +    /* Restore watchdog state. */
>>>>> +    starfive_wdt_set_reload_count(wdt, wdt->reload);
>>>>> +
>>>>> +    starfive_wdt_restart(&wdt->wdt_device, 0, NULL);
>>>>
>>>> I do not understand this call. Per its definition it is a restart handler,
>>>> supposed to restart the hardware. Why would anyone want to restart the
>>>> system on resume ?
>>>
>>> The watchdog start counting from 'count' to 0 on everytime resume like a restart.
>>> So I directly use a restart.
>>>
>>
>> That doesn't answer my question. The "restart" callback resets the hardware.
>> starfive_wdt_restart() is registered as restart handler, and thus expected
>> to reset the hardware. It it doesn't reset the hardware, it should not
>> register itself as restart handler. If it does restart the hardware, calling
>> it on resume would automatically reset the system on each resume.
>> Something is wrong here, and will have to be fixed.
>>
>> I _suspect_ that you think that the restart callback is supposed to reset
>> the watchdog. That would be wrong. It resets (restarts) the hardware,
>> not the watchdog. Please read Documentation/watchdog/watchdog-kernel-api.rst
>> if there are questions about this callback.
>>
> 
> Thanks you for reminding me. I finally understand that the restart callback is supposed
> to reset the hardware not watchdog. This watchdog doesn't reset the hardware, and I will
> remove that. By the way, if I don't need restart callback, would I still use the
> 'watchdog_set_restart_priority' function? Thanks.
> 

No.

Thanks,
Guenter

> Best regards,
> Xingyu Wu
Xingyu Wu Feb. 16, 2023, 7:11 a.m. UTC | #7
On 2023/2/2 6:46, Guenter Roeck wrote:
> On Mon, Dec 19, 2022 at 05:42:32PM +0800, Xingyu Wu wrote:
>> Add watchdog driver for the StarFive JH7110 SoC.
>> 
>> Signed-off-by: Xingyu Wu <xingyu.wu@starfivetech.com>
>> +
>>[...]
>> +
>> +static const struct watchdog_info starfive_wdt_ident = {
>> +	.options = OPTIONS,
>> +	.firmware_version = 0,
> 
> It is not necessary to initilize a static variable with 0.
> 
>> +	.identity = "StarFive Watchdog",
>> +};

Hi Guenter,

It would be a compilation error if drop the '0'. I found that other files
initialize this static variable as well.


Best regards,
Xingyu Wu
Guenter Roeck Feb. 16, 2023, 2:57 p.m. UTC | #8
On 2/15/23 23:11, Xingyu Wu wrote:
> On 2023/2/2 6:46, Guenter Roeck wrote:
>> On Mon, Dec 19, 2022 at 05:42:32PM +0800, Xingyu Wu wrote:
>>> Add watchdog driver for the StarFive JH7110 SoC.
>>>
>>> Signed-off-by: Xingyu Wu <xingyu.wu@starfivetech.com>
>>> +
>>> [...]
>>> +
>>> +static const struct watchdog_info starfive_wdt_ident = {
>>> +	.options = OPTIONS,
>>> +	.firmware_version = 0,
>>
>> It is not necessary to initilize a static variable with 0.
>>
>>> +	.identity = "StarFive Watchdog",
>>> +};
> 
> Hi Guenter,
> 
> It would be a compilation error if drop the '0'. I found that other files

No.

> initialize this static variable as well.
> 

Ah, the old "others do it, so do I" argument.
Sorry, that is not a valid argument.

Guenter
Xingyu Wu Feb. 17, 2023, 2:30 a.m. UTC | #9
On 2023/2/16 22:57, Guenter Roeck wrote:
> On 2/15/23 23:11, Xingyu Wu wrote:
>> On 2023/2/2 6:46, Guenter Roeck wrote:
>>> On Mon, Dec 19, 2022 at 05:42:32PM +0800, Xingyu Wu wrote:
>>>> Add watchdog driver for the StarFive JH7110 SoC.
>>>>
>>>> Signed-off-by: Xingyu Wu <xingyu.wu@starfivetech.com>
>>>> +
>>>> [...]
>>>> +
>>>> +static const struct watchdog_info starfive_wdt_ident = {
>>>> +    .options = OPTIONS,
>>>> +    .firmware_version = 0,
>>>
>>> It is not necessary to initilize a static variable with 0.
>>>
>>>> +    .identity = "StarFive Watchdog",
>>>> +};
>>
>> Hi Guenter,
>>
>> It would be a compilation error if drop the '0'. I found that other files
> 
> No.
> 
>> initialize this static variable as well.
>>
> 
> Ah, the old "others do it, so do I" argument.
> Sorry, that is not a valid argument.
> 

Can I assign ‘firmware_version’ to a macro definition in the probe?

Best regards,
Xingyu Wu
Xingyu Wu Feb. 17, 2023, 7:29 a.m. UTC | #10
On 2023/2/17 10:30, Xingyu Wu wrote:
> On 2023/2/16 22:57, Guenter Roeck wrote:
>> On 2/15/23 23:11, Xingyu Wu wrote:
>>> On 2023/2/2 6:46, Guenter Roeck wrote:
>>>> On Mon, Dec 19, 2022 at 05:42:32PM +0800, Xingyu Wu wrote:
>>>>> Add watchdog driver for the StarFive JH7110 SoC.
>>>>>
>>>>> Signed-off-by: Xingyu Wu <xingyu.wu@starfivetech.com>
>>>>> +
>>>>> [...]
>>>>> +
>>>>> +static const struct watchdog_info starfive_wdt_ident = {
>>>>> +    .options = OPTIONS,
>>>>> +    .firmware_version = 0,
>>>>
>>>> It is not necessary to initilize a static variable with 0.
>>>>
>>>>> +    .identity = "StarFive Watchdog",
>>>>> +};
>>>
>>> Hi Guenter,
>>>
>>> It would be a compilation error if drop the '0'. I found that other files
>> 
>> No.
>> 
>>> initialize this static variable as well.
>>>
>> 
>> Ah, the old "others do it, so do I" argument.
>> Sorry, that is not a valid argument.
>> 
> 
> Can I assign ‘firmware_version’ to a macro definition in the probe?
> 

Or drop the 'firmware_version' ?

Best regards,
Xingyu Wu
diff mbox series

Patch

diff --git a/MAINTAINERS b/MAINTAINERS
index a70c1d0f303e..9c1758e7d034 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -19623,6 +19623,13 @@  F:	Documentation/devicetree/bindings/reset/starfive,jh7100-reset.yaml
 F:	drivers/reset/starfive/
 F:	include/dt-bindings/reset/starfive*
 
+STARFIVE JH7110 WATCHDOG DRIVER
+M:	Xingyu Wu <xingyu.wu@starfivetech.com>
+M:	Samin Guo <samin.guo@starfivetech.com>
+S:	Supported
+F:	Documentation/devicetree/bindings/watchdog/starfive*
+F:	drivers/watchdog/starfive-wdt.c
+
 STATIC BRANCH/CALL
 M:	Peter Zijlstra <peterz@infradead.org>
 M:	Josh Poimboeuf <jpoimboe@kernel.org>
diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index b64bc49c7f30..8eeb0e23e98d 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -2082,6 +2082,17 @@  config UML_WATCHDOG
 	tristate "UML watchdog"
 	depends on UML || COMPILE_TEST
 
+# RISCV Architecture
+
+config STARFIVE_WATCHDOG
+	tristate "StarFive Watchdog support"
+	depends on RISCV
+	select WATCHDOG_CORE
+	default SOC_STARFIVE
+	help
+	  Say Y here to support the watchdog of StarFive JH7110 SoC.
+	  This driver can also be built as a module if choose M.
+
 #
 # ISA-based Watchdog Cards
 #
diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile
index d41e5f830ae7..9c22f1a43d5c 100644
--- a/drivers/watchdog/Makefile
+++ b/drivers/watchdog/Makefile
@@ -210,6 +210,9 @@  obj-$(CONFIG_WATCHDOG_SUN4V)		+= sun4v_wdt.o
 # Xen
 obj-$(CONFIG_XEN_WDT) += xen_wdt.o
 
+# RISCV Architecture
+obj-$(CONFIG_STARFIVE_WATCHDOG) += starfive-wdt.o
+
 # Architecture Independent
 obj-$(CONFIG_BD957XMUF_WATCHDOG) += bd9576_wdt.o
 obj-$(CONFIG_DA9052_WATCHDOG) += da9052_wdt.o
diff --git a/drivers/watchdog/starfive-wdt.c b/drivers/watchdog/starfive-wdt.c
new file mode 100644
index 000000000000..d7fad0a2207c
--- /dev/null
+++ b/drivers/watchdog/starfive-wdt.c
@@ -0,0 +1,720 @@ 
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Starfive Watchdog driver
+ *
+ * Copyright (C) 2022 StarFive Technology Co., Ltd.
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/iopoll.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/reset.h>
+#include <linux/reset-controller.h>
+#include <linux/slab.h>
+#include <linux/timer.h>
+#include <linux/types.h>
+#include <linux/uaccess.h>
+#include <linux/watchdog.h>
+
+/* JH7110 WatchDog register define */
+#define STARFIVE_WDT_JH7110_LOAD	0x000	/* RW: Watchdog load register */
+#define STARFIVE_WDT_JH7110_VALUE	0x004	/* RO: The current value for the watchdog counter */
+#define STARFIVE_WDT_JH7110_CONTROL	0x008	/*
+						 * RW:
+						 * [0]: reset enable;
+						 * [1]: int enable/wdt enable/reload counter;
+						 * [31:2]: reserve.
+						 */
+#define STARFIVE_WDT_JH7110_INTCLR	0x00c	/* WO: clear intterupt && reload the counter */
+#define STARFIVE_WDT_JH7110_RIS		0x010	/* RO: Raw interrupt status from the counter */
+#define STARFIVE_WDT_JH7110_IMS		0x014	/* RO: Enabled interrupt status from the counter */
+#define STARFIVE_WDT_JH7110_LOCK	0xc00	/*
+						 * RO: Enable write access to all other registers
+						 * by writing 0x1ACCE551.
+						 */
+
+#define STARFIVE_WDT_JH7110_UNLOCK_KEY		0x1acce551
+#define STARFIVE_WDT_JH7110_RESEN_SHIFT		1
+#define STARFIVE_WDT_JH7110_EN_SHIFT		0
+
+/* WDOGCONTROL */
+#define STARFIVE_WDT_ENABLE	0x1
+#define STARFIVE_WDT_RESET_EN	0x1
+
+/* WDOGLOCK */
+#define STARFIVE_WDT_LOCKED	BIT(0)
+
+/* WDOGINTCLR */
+#define STARFIVE_WDT_INTCLR	0x1
+
+#define STARFIVE_WDT_ATBOOT	0x0
+#define STARFIVE_WDT_MAXCNT	0xffffffff
+
+#define STARFIVE_WDT_DEFAULT_TIME	(15)
+#define STARFIVE_WDT_DELAY_US		0
+#define STARFIVE_WDT_TIMEOUT_US		10000
+
+static bool nowayout = WATCHDOG_NOWAYOUT;
+static int tmr_margin;
+static int tmr_atboot = STARFIVE_WDT_ATBOOT;
+static int soft_noboot;
+
+module_param(tmr_margin, int, 0);
+module_param(tmr_atboot, int, 0);
+module_param(nowayout, bool, 0);
+module_param(soft_noboot, int, 0);
+
+MODULE_PARM_DESC(tmr_margin, "Watchdog tmr_margin in seconds. (default="
+		 __MODULE_STRING(STARFIVE_WDT_DEFAULT_TIME) ")");
+MODULE_PARM_DESC(tmr_atboot,
+		 "Watchdog is started at boot time if set to 1, default="
+		 __MODULE_STRING(STARFIVE_WDT_ATBOOT));
+MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default="
+		 __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+MODULE_PARM_DESC(soft_noboot,
+		 "Watchdog action, set to 1 to ignore reboots, 0 to reboot (default 0)");
+
+struct starfive_wdt_variant {
+	u32 control;
+	u32 load;
+	u32 enable;
+	u32 value;
+	u32 int_clr;
+	u32 unlock;
+	u32 unlock_key;
+	u32 irq_is_raise;
+	u8 enrst_shift;
+	u8 en_shift;
+};
+
+struct starfive_wdt {
+	unsigned long freq;
+	struct device *dev;
+	struct watchdog_device wdt_device;
+	struct clk *core_clk;
+	struct clk *apb_clk;
+	struct reset_control *rsts;
+	const struct starfive_wdt_variant *drv_data;
+	u32 count;	/*count of timeout*/
+	u32 reload;	/*restore the count*/
+	void __iomem *base;
+	spinlock_t lock;	/* spinlock for register handling */
+};
+
+#ifdef CONFIG_OF
+/* Register bias in JH7110 */
+static const struct starfive_wdt_variant drv_data_jh7110 = {
+	.control = STARFIVE_WDT_JH7110_CONTROL,
+	.load = STARFIVE_WDT_JH7110_LOAD,
+	.enable = STARFIVE_WDT_JH7110_CONTROL,
+	.value = STARFIVE_WDT_JH7110_VALUE,
+	.int_clr = STARFIVE_WDT_JH7110_INTCLR,
+	.unlock = STARFIVE_WDT_JH7110_LOCK,
+	.unlock_key = STARFIVE_WDT_JH7110_UNLOCK_KEY,
+	.irq_is_raise = STARFIVE_WDT_JH7110_IMS,
+	.enrst_shift = STARFIVE_WDT_JH7110_RESEN_SHIFT,
+	.en_shift = STARFIVE_WDT_JH7110_EN_SHIFT,
+};
+
+static const struct of_device_id starfive_wdt_match[] = {
+	{ .compatible = "starfive,jh7110-wdt", .data = &drv_data_jh7110 },
+	{}
+};
+MODULE_DEVICE_TABLE(of, starfive_wdt_match);
+#endif
+
+static const struct platform_device_id starfive_wdt_ids[] = {
+	{
+		.name = "starfive-jh7110-wdt",
+		.driver_data = (unsigned long)&drv_data_jh7110,
+	},
+	{}
+};
+MODULE_DEVICE_TABLE(platform, starfive_wdt_ids);
+
+static int starfive_wdt_get_clock_rate(struct starfive_wdt *wdt)
+{
+	if (!IS_ERR(wdt->core_clk)) {
+		wdt->freq = clk_get_rate(wdt->core_clk);
+		return 0;
+	}
+	dev_err(wdt->dev, "get clock rate failed.\n");
+
+	return -ENOENT;
+}
+
+static int starfive_wdt_enable_clock(struct starfive_wdt *wdt)
+{
+	int ret = 0;
+
+	wdt->apb_clk = devm_clk_get_enabled(wdt->dev, "apb");
+	if (IS_ERR(wdt->apb_clk)) {
+		dev_err(wdt->dev, "failed to get and enable apb clock.\n");
+		ret = PTR_ERR(wdt->apb_clk);
+		return ret;
+	}
+
+	wdt->core_clk = devm_clk_get_enabled(wdt->dev, "core");
+	if (IS_ERR(wdt->core_clk)) {
+		dev_err(wdt->dev, "failed to get and enable core clock.\n");
+		ret = PTR_ERR(wdt->core_clk);
+	}
+
+	return ret;
+}
+
+static int starfive_wdt_reset_init(struct starfive_wdt *wdt)
+{
+	int ret = 0;
+
+	wdt->rsts = devm_reset_control_array_get_exclusive(wdt->dev);
+	if (!IS_ERR(wdt->rsts)) {
+		ret = reset_control_deassert(wdt->rsts);
+		if (ret)
+			dev_err(wdt->dev, "failed to deassert rsts.\n");
+	} else {
+		dev_err(wdt->dev, "failed to get rsts error.\n");
+		ret = PTR_ERR(wdt->rsts);
+	}
+
+	return ret;
+}
+
+static u32 starfive_wdt_ticks_to_sec(struct starfive_wdt *wdt, u32 ticks)
+{
+	return DIV_ROUND_CLOSEST(ticks, wdt->freq);
+}
+
+/*
+ * Write unlock-key to unlock. Write other value to lock. When lock bit is 1,
+ * external accesses to other watchdog registers are ignored.
+ */
+static bool starfive_wdt_is_locked(struct starfive_wdt *wdt)
+{
+	u32 val;
+
+	val = readl(wdt->base + wdt->drv_data->unlock);
+	return !!(val & STARFIVE_WDT_LOCKED);
+}
+
+static void starfive_wdt_unlock(struct starfive_wdt *wdt)
+{
+	if (starfive_wdt_is_locked(wdt))
+		writel(wdt->drv_data->unlock_key,
+		       wdt->base + wdt->drv_data->unlock);
+}
+
+static void starfive_wdt_lock(struct starfive_wdt *wdt)
+{
+	if (!starfive_wdt_is_locked(wdt))
+		writel(~wdt->drv_data->unlock_key,
+		       wdt->base + wdt->drv_data->unlock);
+}
+
+/* enable watchdog interrupt to reset */
+static void starfive_wdt_enable_reset(struct starfive_wdt *wdt)
+{
+	u32 val;
+
+	val = readl(wdt->base + wdt->drv_data->control);
+	val |= STARFIVE_WDT_RESET_EN << wdt->drv_data->enrst_shift;
+	writel(val, wdt->base + wdt->drv_data->control);
+}
+
+/* disable watchdog interrupt to reset */
+static void starfive_wdt_disable_reset(struct starfive_wdt *wdt)
+{
+	u32 val;
+
+	val = readl(wdt->base + wdt->drv_data->control);
+	val &= ~(STARFIVE_WDT_RESET_EN << wdt->drv_data->enrst_shift);
+	writel(val, wdt->base + wdt->drv_data->control);
+}
+
+/* interrupt status whether has been raised from the counter */
+static bool starfive_wdt_raise_irq_status(struct starfive_wdt *wdt)
+{
+	return !!readl(wdt->base + wdt->drv_data->irq_is_raise);
+}
+
+static void starfive_wdt_int_clr(struct starfive_wdt *wdt)
+{
+	writel(STARFIVE_WDT_INTCLR, wdt->base + wdt->drv_data->int_clr);
+}
+
+static inline void starfive_wdt_set_count(struct starfive_wdt *wdt, u32 val)
+{
+	writel(val, wdt->base + wdt->drv_data->load);
+}
+
+static inline u32 starfive_wdt_get_count(struct starfive_wdt *wdt)
+{
+	return readl(wdt->base + wdt->drv_data->value);
+}
+
+static inline void starfive_wdt_enable(struct starfive_wdt *wdt)
+{
+	u32 val;
+
+	val = readl(wdt->base + wdt->drv_data->enable);
+	val |= STARFIVE_WDT_ENABLE << wdt->drv_data->en_shift;
+	writel(val, wdt->base + wdt->drv_data->enable);
+}
+
+static inline void starfive_wdt_disable(struct starfive_wdt *wdt)
+{
+	u32 val;
+
+	val = readl(wdt->base + wdt->drv_data->enable);
+	val &= ~(STARFIVE_WDT_ENABLE << wdt->drv_data->en_shift);
+	writel(val, wdt->base + wdt->drv_data->enable);
+}
+
+static inline void starfive_wdt_set_reload_count(struct starfive_wdt *wdt, u32 count)
+{
+	starfive_wdt_set_count(wdt, count);
+	/* need enable controller to reload counter */
+	starfive_wdt_enable(wdt);
+}
+
+static void starfive_wdt_mask_and_disable_reset(struct starfive_wdt *wdt, bool mask)
+{
+	starfive_wdt_unlock(wdt);
+
+	if (mask)
+		starfive_wdt_disable_reset(wdt);
+	else
+		starfive_wdt_enable_reset(wdt);
+
+	starfive_wdt_lock(wdt);
+}
+
+static unsigned int starfive_wdt_max_timeout(struct starfive_wdt *wdt)
+{
+	return DIV_ROUND_UP(STARFIVE_WDT_MAXCNT, wdt->freq) - 1;
+}
+
+static unsigned int starfive_wdt_get_timeleft(struct watchdog_device *wdd)
+{
+	struct starfive_wdt *wdt = watchdog_get_drvdata(wdd);
+	u32 count;
+
+	starfive_wdt_unlock(wdt);
+	/*
+	 * Because set half count value,
+	 * timeleft value should add the count value before first timeout.
+	 */
+	count = starfive_wdt_get_count(wdt);
+	if (!starfive_wdt_raise_irq_status(wdt))
+		count += wdt->count;
+
+	starfive_wdt_lock(wdt);
+
+	return starfive_wdt_ticks_to_sec(wdt, count);
+}
+
+static int starfive_wdt_keepalive(struct watchdog_device *wdd)
+{
+	struct starfive_wdt *wdt = watchdog_get_drvdata(wdd);
+
+	spin_lock(&wdt->lock);
+
+	starfive_wdt_unlock(wdt);
+	starfive_wdt_int_clr(wdt);
+	starfive_wdt_set_reload_count(wdt, wdt->count);
+	starfive_wdt_lock(wdt);
+
+	spin_unlock(&wdt->lock);
+
+	return 0;
+}
+
+static int starfive_wdt_stop(struct watchdog_device *wdd)
+{
+	struct starfive_wdt *wdt = watchdog_get_drvdata(wdd);
+
+	spin_lock(&wdt->lock);
+
+	starfive_wdt_unlock(wdt);
+	starfive_wdt_int_clr(wdt);
+	starfive_wdt_disable(wdt);
+	starfive_wdt_lock(wdt);
+
+	spin_unlock(&wdt->lock);
+
+	return 0;
+}
+
+static int starfive_wdt_pm_stop(struct watchdog_device *wdd)
+{
+	struct starfive_wdt *wdt = watchdog_get_drvdata(wdd);
+
+	starfive_wdt_stop(wdd);
+	pm_runtime_put(wdt->dev);
+
+	return 0;
+}
+
+static int starfive_wdt_start(struct watchdog_device *wdd)
+{
+	struct starfive_wdt *wdt = watchdog_get_drvdata(wdd);
+
+	pm_runtime_get_sync(wdt->dev);
+
+	spin_lock(&wdt->lock);
+
+	starfive_wdt_unlock(wdt);
+
+	if (soft_noboot)
+		starfive_wdt_disable_reset(wdt);
+	else
+		starfive_wdt_enable_reset(wdt);
+
+	starfive_wdt_int_clr(wdt);
+	starfive_wdt_set_count(wdt, wdt->count);
+	starfive_wdt_enable(wdt);
+
+	starfive_wdt_lock(wdt);
+
+	spin_unlock(&wdt->lock);
+
+	return 0;
+}
+
+static int starfive_wdt_restart(struct watchdog_device *wdd, unsigned long action,
+				void *data)
+{
+	struct starfive_wdt *wdt = watchdog_get_drvdata(wdd);
+
+	spin_lock(&wdt->lock);
+	starfive_wdt_unlock(wdt);
+	/* disable watchdog, to be safe */
+	starfive_wdt_disable(wdt);
+
+	if (soft_noboot)
+		starfive_wdt_disable_reset(wdt);
+	else
+		starfive_wdt_enable_reset(wdt);
+
+	/* put native values into count */
+	starfive_wdt_set_count(wdt, wdt->count);
+
+	/* set the watchdog to go and reset */
+	starfive_wdt_int_clr(wdt);
+	starfive_wdt_enable(wdt);
+
+	starfive_wdt_lock(wdt);
+	spin_unlock(&wdt->lock);
+
+	return 0;
+}
+
+static int starfive_wdt_set_timeout(struct watchdog_device *wdd,
+				    unsigned int timeout)
+{
+	struct starfive_wdt *wdt = watchdog_get_drvdata(wdd);
+
+	unsigned long freq = wdt->freq;
+	unsigned int count;
+
+	spin_lock(&wdt->lock);
+
+	if (timeout < wdt->wdt_device.min_timeout)
+		return -EINVAL;
+
+	/*
+	 * This watchdog takes twice timeouts to reset.
+	 * In order to reduce time to reset, should set half count value.
+	 */
+	count = timeout * freq / 2;
+
+	if (count > STARFIVE_WDT_MAXCNT) {
+		dev_warn(wdt->dev, "timeout %d too big,use the MAX-timeout set.\n",
+			 timeout);
+		timeout = starfive_wdt_max_timeout(wdt);
+		count = timeout * freq;
+	}
+
+	dev_info(wdt->dev, "Heartbeat: timeout=%d, count/2=%d (%08x)\n",
+		 timeout, count, count);
+
+	starfive_wdt_unlock(wdt);
+	starfive_wdt_disable(wdt);
+	starfive_wdt_set_reload_count(wdt, count);
+	starfive_wdt_enable(wdt);
+	starfive_wdt_lock(wdt);
+
+	wdt->count = count;
+	wdd->timeout = timeout;
+
+	spin_unlock(&wdt->lock);
+
+	return 0;
+}
+
+#define OPTIONS (WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE)
+
+static const struct watchdog_info starfive_wdt_ident = {
+	.options = OPTIONS,
+	.firmware_version = 0,
+	.identity = "StarFive Watchdog",
+};
+
+static const struct watchdog_ops starfive_wdt_ops = {
+	.owner = THIS_MODULE,
+	.start = starfive_wdt_start,
+	.stop = starfive_wdt_pm_stop,
+	.ping = starfive_wdt_keepalive,
+	.set_timeout = starfive_wdt_set_timeout,
+	.restart = starfive_wdt_restart,
+	.get_timeleft = starfive_wdt_get_timeleft,
+};
+
+static const struct watchdog_device starfive_wdd = {
+	.info = &starfive_wdt_ident,
+	.ops = &starfive_wdt_ops,
+	.timeout = STARFIVE_WDT_DEFAULT_TIME,
+};
+
+static inline const struct starfive_wdt_variant *
+starfive_wdt_get_drv_data(struct platform_device *pdev)
+{
+	const struct starfive_wdt_variant *variant;
+
+	variant = of_device_get_match_data(&pdev->dev);
+	if (!variant) {
+		/* Device matched by platform_device_id */
+		variant = (struct starfive_wdt_variant *)
+			   platform_get_device_id(pdev)->driver_data;
+	}
+
+	return variant;
+}
+
+static int starfive_wdt_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct starfive_wdt *wdt;
+	int started = 0;
+	int ret;
+
+	pm_runtime_enable(dev);
+
+	wdt = devm_kzalloc(dev, sizeof(*wdt), GFP_KERNEL);
+	if (!wdt)
+		return -ENOMEM;
+
+	wdt->dev = dev;
+	spin_lock_init(&wdt->lock);
+	wdt->wdt_device = starfive_wdd;
+
+	wdt->drv_data = starfive_wdt_get_drv_data(pdev);
+
+	/* get the memory region for the watchdog timer */
+	wdt->base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(wdt->base)) {
+		ret = PTR_ERR(wdt->base);
+		return ret;
+	}
+
+	ret = starfive_wdt_enable_clock(wdt);
+	if (ret)
+		return ret;
+
+	ret = starfive_wdt_get_clock_rate(wdt);
+	if (ret)
+		goto err_clk_disable;
+
+	ret = starfive_wdt_reset_init(wdt);
+	if (ret)
+		goto err_clk_disable;
+
+	wdt->wdt_device.min_timeout = 1;
+	wdt->wdt_device.max_timeout = starfive_wdt_max_timeout(wdt);
+
+	watchdog_set_drvdata(&wdt->wdt_device, wdt);
+
+	/*
+	 * see if we can actually set the requested timer margin,
+	 * and if not, try the default value.
+	 */
+	watchdog_init_timeout(&wdt->wdt_device, tmr_margin, dev);
+
+	ret = starfive_wdt_set_timeout(&wdt->wdt_device,
+				       wdt->wdt_device.timeout);
+	if (ret) {
+		dev_err(dev, "tmr_margin value out of range, default %d used\n",
+			STARFIVE_WDT_DEFAULT_TIME);
+		starfive_wdt_set_timeout(&wdt->wdt_device,
+					 STARFIVE_WDT_DEFAULT_TIME);
+	}
+
+	watchdog_set_nowayout(&wdt->wdt_device, nowayout);
+	watchdog_set_restart_priority(&wdt->wdt_device, 128);
+	watchdog_stop_on_reboot(&wdt->wdt_device);
+	watchdog_stop_on_unregister(&wdt->wdt_device);
+
+	wdt->wdt_device.parent = dev;
+
+	ret = watchdog_register_device(&wdt->wdt_device);
+	if (ret)
+		goto err_clk_disable;
+
+	starfive_wdt_mask_and_disable_reset(wdt, false);
+
+	if (tmr_atboot && started == 0) {
+		starfive_wdt_start(&wdt->wdt_device);
+	} else if (!tmr_atboot) {
+		/*
+		 *if we're not enabling the watchdog, then ensure it is
+		 * disabled if it has been left running from the bootloader
+		 * or other source.
+		 */
+		starfive_wdt_stop(&wdt->wdt_device);
+	}
+
+#ifdef CONFIG_PM
+	clk_disable_unprepare(wdt->core_clk);
+	clk_disable_unprepare(wdt->apb_clk);
+#endif
+
+	platform_set_drvdata(pdev, wdt);
+
+	return 0;
+
+err_clk_disable:
+	clk_disable_unprepare(wdt->core_clk);
+	clk_disable_unprepare(wdt->apb_clk);
+
+	return ret;
+}
+
+static int starfive_wdt_remove(struct platform_device *dev)
+{
+	struct starfive_wdt *wdt = platform_get_drvdata(dev);
+
+	starfive_wdt_mask_and_disable_reset(wdt, true);
+	watchdog_unregister_device(&wdt->wdt_device);
+
+	clk_disable_unprepare(wdt->core_clk);
+	clk_disable_unprepare(wdt->apb_clk);
+	pm_runtime_disable(wdt->dev);
+
+	return 0;
+}
+
+static void starfive_wdt_shutdown(struct platform_device *dev)
+{
+	struct starfive_wdt *wdt = platform_get_drvdata(dev);
+
+	starfive_wdt_mask_and_disable_reset(wdt, true);
+
+	starfive_wdt_pm_stop(&wdt->wdt_device);
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int starfive_wdt_suspend(struct device *dev)
+{
+	int ret;
+	struct starfive_wdt *wdt = dev_get_drvdata(dev);
+
+	starfive_wdt_unlock(wdt);
+
+	/* Save watchdog state, and turn it off. */
+	wdt->reload = starfive_wdt_get_count(wdt);
+
+	starfive_wdt_mask_and_disable_reset(wdt, true);
+
+	/* Note that WTCNT doesn't need to be saved. */
+	starfive_wdt_stop(&wdt->wdt_device);
+	pm_runtime_force_suspend(dev);
+
+	starfive_wdt_lock(wdt);
+
+	return 0;
+}
+
+static int starfive_wdt_resume(struct device *dev)
+{
+	int ret;
+	struct starfive_wdt *wdt = dev_get_drvdata(dev);
+
+	starfive_wdt_unlock(wdt);
+
+	pm_runtime_force_resume(dev);
+
+	/* Restore watchdog state. */
+	starfive_wdt_set_reload_count(wdt, wdt->reload);
+
+	starfive_wdt_restart(&wdt->wdt_device, 0, NULL);
+
+	starfive_wdt_mask_and_disable_reset(wdt, false);
+
+	starfive_wdt_lock(wdt);
+
+	return 0;
+}
+#endif /* CONFIG_PM_SLEEP */
+
+#ifdef CONFIG_PM
+static int starfive_wdt_runtime_suspend(struct device *dev)
+{
+	struct starfive_wdt *wdt = dev_get_drvdata(dev);
+
+	clk_disable_unprepare(wdt->apb_clk);
+	clk_disable_unprepare(wdt->core_clk);
+
+	return 0;
+}
+
+static int starfive_wdt_runtime_resume(struct device *dev)
+{
+	struct starfive_wdt *wdt = dev_get_drvdata(dev);
+	int ret;
+
+	ret = clk_prepare_enable(wdt->apb_clk);
+	if (ret) {
+		dev_err(wdt->dev, "failed to enable apb_clk.\n");
+		return ret;
+	}
+
+	ret = clk_prepare_enable(wdt->core_clk);
+	if (ret)
+		dev_err(wdt->dev, "failed to enable core_clk.\n");
+
+	return ret;
+}
+#endif /* CONFIG_PM */
+
+static const struct dev_pm_ops starfive_wdt_pm_ops = {
+	SET_RUNTIME_PM_OPS(starfive_wdt_runtime_suspend, starfive_wdt_runtime_resume, NULL)
+	SET_SYSTEM_SLEEP_PM_OPS(starfive_wdt_suspend, starfive_wdt_resume)
+};
+
+static struct platform_driver starfive_wdt_driver = {
+	.probe		= starfive_wdt_probe,
+	.remove		= starfive_wdt_remove,
+	.shutdown	= starfive_wdt_shutdown,
+	.id_table	= starfive_wdt_ids,
+	.driver		= {
+		.name	= "starfive-wdt",
+		.pm	= &starfive_wdt_pm_ops,
+		.of_match_table = of_match_ptr(starfive_wdt_match),
+	},
+};
+
+module_platform_driver(starfive_wdt_driver);
+
+MODULE_AUTHOR("Xingyu Wu <xingyu.wu@starfivetech.com>");
+MODULE_AUTHOR("Samin Guo <samin.guo@starfivetech.com>");
+MODULE_DESCRIPTION("StarFive Watchdog Device Driver");
+MODULE_LICENSE("GPL v2");