diff mbox series

[v3,6/7] riscv: dts: starfive: jh7110: Add syscon nodes

Message ID 20230414024157.53203-7-xingyu.wu@starfivetech.com (mailing list archive)
State Superseded
Delegated to: Conor Dooley
Headers show
Series Add PLL clocks driver for StarFive JH7110 SoC | expand

Checks

Context Check Description
conchuod/tree_selection fail Failed to apply to next/pending-fixes or riscv/for-next

Commit Message

Xingyu Wu April 14, 2023, 2:41 a.m. UTC 
From: William Qiu <william.qiu@starfivetech.com>

Add stg_syscon/sys_syscon/aon_syscon nodes for JH7110 Soc.

Signed-off-by: William Qiu <william.qiu@starfivetech.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
---
 arch/riscv/boot/dts/starfive/jh7110.dtsi | 15 +++++++++++++++
 1 file changed, 15 insertions(+)
diff mbox series

Patch

diff --git a/arch/riscv/boot/dts/starfive/jh7110.dtsi b/arch/riscv/boot/dts/starfive/jh7110.dtsi
index 4c5fdb905da8..f271c3184d3a 100644
--- a/arch/riscv/boot/dts/starfive/jh7110.dtsi
+++ b/arch/riscv/boot/dts/starfive/jh7110.dtsi
@@ -353,6 +353,11 @@  i2c2: i2c@10050000 {
 			status = "disabled";
 		};
 
+		stg_syscon: syscon@10240000 {
+			compatible = "starfive,jh7110-stg-syscon", "syscon";
+			reg = <0x0 0x10240000 0x0 0x1000>;
+		};
+
 		uart3: serial@12000000 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x0 0x12000000 0x0 0x10000>;
@@ -457,6 +462,11 @@  syscrg: clock-controller@13020000 {
 			#reset-cells = <1>;
 		};
 
+		sys_syscon: syscon@13030000 {
+			compatible = "starfive,jh7110-sys-syscon", "syscon", "simple-mfd";
+			reg = <0x0 0x13030000 0x0 0x1000>;
+		};
+
 		sysgpio: pinctrl@13040000 {
 			compatible = "starfive,jh7110-sys-pinctrl";
 			reg = <0x0 0x13040000 0x0 0x10000>;
@@ -486,6 +496,11 @@  aoncrg: clock-controller@17000000 {
 			#reset-cells = <1>;
 		};
 
+		aon_syscon: syscon@17010000 {
+			compatible = "starfive,jh7110-aon-syscon", "syscon", "simple-mfd";
+			reg = <0x0 0x17010000 0x0 0x1000>;
+		};
+
 		aongpio: pinctrl@17020000 {
 			compatible = "starfive,jh7110-aon-pinctrl";
 			reg = <0x0 0x17020000 0x0 0x10000>;