diff mbox series

[v4,2/3] pwm: Add Allwinner's D1/T113-S3/R329 SoCs PWM support

Message ID 20230810145443.1053387-3-privatesub2@gmail.com (mailing list archive)
State Superseded
Headers show
Series Add support for Allwinner PWM on D1/T113s/R329 SoCs | expand

Checks

Context Check Description
conchuod/cover_letter success Series has a cover letter
conchuod/tree_selection success Guessed tree name to be for-next at HEAD 174e8ac0272d
conchuod/fixes_present success Fixes tag not required for -next series
conchuod/maintainers_pattern success MAINTAINERS pattern errors before the patch: 4 and now 4
conchuod/verify_signedoff success Signed-off-by tag matches author and committer
conchuod/kdoc success Errors and warnings before: 0 this patch: 0
conchuod/build_rv64_clang_allmodconfig success Errors and warnings before: 9 this patch: 9
conchuod/module_param success Was 0 now: 0
conchuod/build_rv64_gcc_allmodconfig success Errors and warnings before: 9 this patch: 9
conchuod/build_rv32_defconfig success Build OK
conchuod/dtb_warn_rv64 success Errors and warnings before: 12 this patch: 12
conchuod/header_inline success No static functions without inline keyword in header files
conchuod/checkpatch warning WARNING: added, moved or deleted file(s), does MAINTAINERS need updating? WARNING: please write a help paragraph that fully describes the config symbol
conchuod/build_rv64_nommu_k210_defconfig success Build OK
conchuod/verify_fixes success No Fixes tag
conchuod/build_rv64_nommu_virt_defconfig success Build OK

Commit Message

Aleksandr Shubin Aug. 10, 2023, 2:54 p.m. UTC
Allwinner's D1, T113-S3 and R329 SoCs have a quite different PWM
controllers with ones supported by pwm-sun4i driver.

This patch adds a PWM controller driver for Allwinner's D1,
T113-S3 and R329 SoCs. The main difference between these SoCs
is the number of channels defined by the DT property.

Signed-off-by: Aleksandr Shubin <privatesub2@gmail.com>
---
 drivers/pwm/Kconfig      |  10 ++
 drivers/pwm/Makefile     |   1 +
 drivers/pwm/pwm-sun20i.c | 323 +++++++++++++++++++++++++++++++++++++++
 3 files changed, 334 insertions(+)
 create mode 100644 drivers/pwm/pwm-sun20i.c

Comments

kernel test robot Aug. 12, 2023, 2:46 p.m. UTC | #1
Hi Aleksandr,

kernel test robot noticed the following build warnings:

[auto build test WARNING on thierry-reding-pwm/for-next]
[also build test WARNING on sunxi/sunxi/for-next robh/for-next linus/master v6.5-rc5 next-20230809]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch#_base_tree_information]

url:    https://github.com/intel-lab-lkp/linux/commits/Aleksandr-Shubin/dt-bindings-pwm-Add-binding-for-Allwinner-D1-T113-S3-R329-PWM-controller/20230810-225849
base:   https://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm.git for-next
patch link:    https://lore.kernel.org/r/20230810145443.1053387-3-privatesub2%40gmail.com
patch subject: [PATCH v4 2/3] pwm: Add Allwinner's D1/T113-S3/R329 SoCs PWM support
config: x86_64-allyesconfig (https://download.01.org/0day-ci/archive/20230812/202308122212.SOHP09RP-lkp@intel.com/config)
compiler: gcc-12 (Debian 12.2.0-14) 12.2.0
reproduce: (https://download.01.org/0day-ci/archive/20230812/202308122212.SOHP09RP-lkp@intel.com/reproduce)

If you fix the issue in a separate patch/commit (i.e. not just a new version of
the same patch/commit), kindly add following tags
| Reported-by: kernel test robot <lkp@intel.com>
| Closes: https://lore.kernel.org/oe-kbuild-all/202308122212.SOHP09RP-lkp@intel.com/

All warnings (new ones prefixed by >>):

   drivers/pwm/pwm-sun20i.c: In function 'sun20i_pwm_apply':
>> drivers/pwm/pwm-sun20i.c:121:48: warning: unused variable 'tmp' [-Wunused-variable]
     121 |         u64 bus_rate, hosc_rate, clk_div, val, tmp;
         |                                                ^~~


vim +/tmp +121 drivers/pwm/pwm-sun20i.c

   115	
   116	static int sun20i_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
   117				    const struct pwm_state *state)
   118	{
   119		struct sun20i_pwm_chip *sun20i_chip = to_sun20i_pwm_chip(chip);
   120		u32 clk_gate, clk_cfg, pwm_en, ctl, period;
 > 121		u64 bus_rate, hosc_rate, clk_div, val, tmp;
   122		u32 prescaler, div_m;
   123		bool use_bus_clk;
   124		int ret = 0;
   125	
   126		mutex_lock(&sun20i_chip->mutex);
   127	
   128		pwm_en = sun20i_pwm_readl(sun20i_chip, PWM_ENABLE);
   129	
   130		if (state->enabled != pwm->state.enabled)
   131			clk_gate = sun20i_pwm_readl(sun20i_chip, PWM_CLK_GATE);
   132	
   133		if (state->enabled != pwm->state.enabled && !state->enabled) {
   134			clk_gate &= ~PWM_CLK_GATE_GATING(pwm->hwpwm);
   135			pwm_en &= ~PWM_ENABLE_EN(pwm->hwpwm);
   136			sun20i_pwm_writel(sun20i_chip, pwm_en, PWM_ENABLE);
   137			sun20i_pwm_writel(sun20i_chip, clk_gate, PWM_CLK_GATE);
   138		}
   139	
   140		if (state->polarity != pwm->state.polarity ||
   141		    state->duty_cycle != pwm->state.duty_cycle ||
   142		    state->period != pwm->state.period) {
   143			ctl = sun20i_pwm_readl(sun20i_chip, PWM_CTL(pwm->hwpwm));
   144			clk_cfg = sun20i_pwm_readl(sun20i_chip, PWM_CLK_CFG(pwm->hwpwm));
   145			hosc_rate = clk_get_rate(sun20i_chip->clk_hosc);
   146			bus_rate = clk_get_rate(sun20i_chip->clk_bus);
   147			if (pwm_en & PWM_ENABLE_EN(pwm->hwpwm ^ 1)) {
   148				/* if the neighbor channel is enable, check period only */
   149				use_bus_clk = FIELD_GET(PWM_CLK_CFG_SRC, clk_cfg) != 0;
   150				val = state->period * (use_bus_clk ? bus_rate : hosc_rate);
   151				do_div(val, NSEC_PER_SEC);
   152	
   153				div_m = FIELD_GET(PWM_CLK_CFG_DIV_M, clk_cfg);
   154			} else {
   155				/* check period and select clock source */
   156				use_bus_clk = false;
   157				val = state->period * hosc_rate;
   158				do_div(val, NSEC_PER_SEC);
   159				if (val <= 1) {
   160					use_bus_clk = true;
   161					val = state->period * bus_rate;
   162					do_div(val, NSEC_PER_SEC);
   163					if (val <= 1) {
   164						ret = -EINVAL;
   165						goto unlock_mutex;
   166					}
   167				}
   168				div_m = fls(DIV_ROUND_DOWN_ULL(val, PWM_MAGIC));
   169				if (div_m >= 9) {
   170					ret = -EINVAL;
   171					goto unlock_mutex;
   172				}
   173	
   174				/* set up the CLK_DIV_M and clock CLK_SRC */
   175				clk_cfg = FIELD_PREP(PWM_CLK_CFG_DIV_M, div_m);
   176				clk_cfg |= FIELD_PREP(PWM_CLK_CFG_SRC, use_bus_clk);
   177	
   178				sun20i_pwm_writel(sun20i_chip, clk_cfg, PWM_CLK_CFG(pwm->hwpwm));
   179			}
   180	
   181			/* calculate prescaler, PWM entire cycle */
   182			clk_div = val >> div_m;
   183			if (clk_div <= 65534) {
   184				prescaler = 0;
   185			} else {
   186				prescaler = DIV_ROUND_UP_ULL(clk_div - 65534, 65535);
   187				if (prescaler >= 256) {
   188					ret = -EINVAL;
   189					goto unlock_mutex;
   190				}
   191				do_div(clk_div, prescaler + 1);
   192			}
   193	
   194			period = FIELD_PREP(PWM_PERIOD_ENTIRE_CYCLE, clk_div);
   195	
   196			/* set duty cycle */
   197			val = state->duty_cycle * (use_bus_clk ? bus_rate : hosc_rate);
   198			do_div(val, NSEC_PER_SEC);
   199			clk_div = val >> div_m;
   200			do_div(clk_div, prescaler + 1);
   201	
   202			/*
   203			 * The formula of the output period and the duty-cycle for PWM are as follows.
   204			 * T period = (PWM01_CLK / PWM0_PRESCALE_K)^-1 * (PPR0.PWM_ENTIRE_CYCLE + 1)
   205			 * T high-level = (PWM01_CLK / PWM0_PRESCALE_K)^-1 * PPR0.PWM_ACT_CYCLE
   206			 * Duty-cycle = T high-level / T period
   207			 * In accordance with this formula, in order to set the duty-cycle to 100%,
   208			 * it is necessary that PWM_ACT_CYCLE >= PWM_ENTIRE_CYCLE + 1
   209			 */
   210			if (state->duty_cycle == state->period)
   211				clk_div++;
   212			period |= FIELD_PREP(PWM_PERIOD_ACT_CYCLE, clk_div);
   213			sun20i_pwm_writel(sun20i_chip, period, PWM_PERIOD(pwm->hwpwm));
   214	
   215			ctl = FIELD_PREP(PWM_CTL_PRESCAL_K, prescaler);
   216			if (state->polarity == PWM_POLARITY_NORMAL)
   217				ctl |= PWM_CTL_ACT_STA;
   218	
   219			sun20i_pwm_writel(sun20i_chip, ctl, PWM_CTL(pwm->hwpwm));
   220		}
   221	
   222		if (state->enabled != pwm->state.enabled && state->enabled) {
   223			clk_gate &= ~PWM_CLK_GATE_BYPASS(pwm->hwpwm);
   224			clk_gate |= PWM_CLK_GATE_GATING(pwm->hwpwm);
   225			pwm_en |= PWM_ENABLE_EN(pwm->hwpwm);
   226			sun20i_pwm_writel(sun20i_chip, pwm_en, PWM_ENABLE);
   227			sun20i_pwm_writel(sun20i_chip, clk_gate, PWM_CLK_GATE);
   228		}
   229	
   230	unlock_mutex:
   231		mutex_unlock(&sun20i_chip->mutex);
   232	
   233		return ret;
   234	}
   235
diff mbox series

Patch

diff --git a/drivers/pwm/Kconfig b/drivers/pwm/Kconfig
index 8df861b1f4a3..05c48a36969e 100644
--- a/drivers/pwm/Kconfig
+++ b/drivers/pwm/Kconfig
@@ -594,6 +594,16 @@  config PWM_SUN4I
 	  To compile this driver as a module, choose M here: the module
 	  will be called pwm-sun4i.
 
+config PWM_SUN20I
+	tristate "Allwinner D1/T113s/R329 PWM support"
+	depends on ARCH_SUNXI || COMPILE_TEST
+	depends on COMMON_CLK
+	help
+	  Generic PWM framework driver for Allwinner D1/T113s/R329 SoCs.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called pwm-sun20i.
+
 config PWM_SUNPLUS
 	tristate "Sunplus PWM support"
 	depends on ARCH_SUNPLUS || COMPILE_TEST
diff --git a/drivers/pwm/Makefile b/drivers/pwm/Makefile
index 19899b912e00..cea872e22c78 100644
--- a/drivers/pwm/Makefile
+++ b/drivers/pwm/Makefile
@@ -55,6 +55,7 @@  obj-$(CONFIG_PWM_STM32)		+= pwm-stm32.o
 obj-$(CONFIG_PWM_STM32_LP)	+= pwm-stm32-lp.o
 obj-$(CONFIG_PWM_STMPE)		+= pwm-stmpe.o
 obj-$(CONFIG_PWM_SUN4I)		+= pwm-sun4i.o
+obj-$(CONFIG_PWM_SUN20I)	+= pwm-sun20i.o
 obj-$(CONFIG_PWM_SUNPLUS)	+= pwm-sunplus.o
 obj-$(CONFIG_PWM_TEGRA)		+= pwm-tegra.o
 obj-$(CONFIG_PWM_TIECAP)	+= pwm-tiecap.o
diff --git a/drivers/pwm/pwm-sun20i.c b/drivers/pwm/pwm-sun20i.c
new file mode 100644
index 000000000000..e2d425b64066
--- /dev/null
+++ b/drivers/pwm/pwm-sun20i.c
@@ -0,0 +1,323 @@ 
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * PWM Controller Driver for sunxi platforms (D1, T113-S3 and R329)
+ *
+ * Limitations:
+ * - When the parameters change, current running period will not be completed
+ *   and run new settings immediately.
+ * - It output HIGH-Z state when PWM channel disabled.
+ *
+ * Copyright (c) 2023 Aleksandr Shubin <privatesub2@gmail.com>
+ */
+
+#include <linux/bitfield.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/pwm.h>
+#include <linux/reset.h>
+
+#define PWM_CLK_CFG(chan)		(0x20 + (((chan) >> 1) * 0x4))
+#define PWM_CLK_CFG_SRC			GENMASK(8, 7)
+#define PWM_CLK_CFG_DIV_M		GENMASK(3, 0)
+
+#define PWM_CLK_GATE			0x40
+#define PWM_CLK_GATE_BYPASS(chan)	BIT((chan) - 16)
+#define PWM_CLK_GATE_GATING(chan)	BIT(chan)
+
+#define PWM_ENABLE			0x80
+#define PWM_ENABLE_EN(chan)		BIT(chan)
+
+#define PWM_CTL(chan)			(0x100 + (chan) * 0x20)
+#define PWM_CTL_ACT_STA			BIT(8)
+#define PWM_CTL_PRESCAL_K		GENMASK(7, 0)
+
+#define PWM_PERIOD(chan)		(0x104 + (chan) * 0x20)
+#define PWM_PERIOD_ENTIRE_CYCLE		GENMASK(31, 16)
+#define PWM_PERIOD_ACT_CYCLE		GENMASK(15, 0)
+
+#define PWM_MAGIC			(255 * 65535 + 2 * 65534 + 1)
+
+struct sun20i_pwm_chip {
+	struct clk *clk_bus, *clk_hosc;
+	struct reset_control *rst;
+	struct pwm_chip chip;
+	void __iomem *base;
+	/* Mutex to protect pwm apply state */
+	struct mutex mutex;
+};
+
+static inline struct sun20i_pwm_chip *to_sun20i_pwm_chip(struct pwm_chip *chip)
+{
+	return container_of(chip, struct sun20i_pwm_chip, chip);
+}
+
+static inline u32 sun20i_pwm_readl(struct sun20i_pwm_chip *chip,
+				   unsigned long offset)
+{
+	return readl(chip->base + offset);
+}
+
+static inline void sun20i_pwm_writel(struct sun20i_pwm_chip *chip,
+				     u32 val, unsigned long offset)
+{
+	writel(val, chip->base + offset);
+}
+
+static int sun20i_pwm_get_state(struct pwm_chip *chip,
+				struct pwm_device *pwm,
+				struct pwm_state *state)
+{
+	struct sun20i_pwm_chip *sun20i_chip = to_sun20i_pwm_chip(chip);
+	u16 ent_cycle, act_cycle, prescal;
+	u64 clk_rate, tmp;
+	u8 div_id;
+	u32 val;
+
+	mutex_lock(&sun20i_chip->mutex);
+
+	val = sun20i_pwm_readl(sun20i_chip, PWM_CLK_CFG(pwm->hwpwm));
+	div_id = FIELD_GET(PWM_CLK_CFG_DIV_M, val);
+	if (FIELD_GET(PWM_CLK_CFG_SRC, val) == 0)
+		clk_rate = clk_get_rate(sun20i_chip->clk_hosc);
+	else
+		clk_rate = clk_get_rate(sun20i_chip->clk_bus);
+
+	val = sun20i_pwm_readl(sun20i_chip, PWM_CTL(pwm->hwpwm));
+	state->polarity = (PWM_CTL_ACT_STA & val) ? PWM_POLARITY_NORMAL : PWM_POLARITY_INVERSED;
+
+	prescal = FIELD_GET(PWM_CTL_PRESCAL_K, val) + 1;
+
+	val = sun20i_pwm_readl(sun20i_chip, PWM_ENABLE);
+	state->enabled = (PWM_ENABLE_EN(pwm->hwpwm) & val) ? true : false;
+
+	val = sun20i_pwm_readl(sun20i_chip, PWM_PERIOD(pwm->hwpwm));
+	act_cycle = FIELD_GET(PWM_PERIOD_ACT_CYCLE, val);
+	ent_cycle = FIELD_GET(PWM_PERIOD_ENTIRE_CYCLE, val);
+
+	/*
+	 * The duration of the active phase should not be longer
+	 * than the duration of the period
+	 */
+	if (act_cycle > ent_cycle)
+		act_cycle = ent_cycle;
+
+	tmp = ((u64)(act_cycle) * prescal << div_id) * NSEC_PER_SEC;
+	state->duty_cycle = DIV_ROUND_UP_ULL(tmp, clk_rate);
+	tmp = ((u64)(ent_cycle) * prescal << div_id) * NSEC_PER_SEC;
+	state->period = DIV_ROUND_UP_ULL(tmp, clk_rate);
+	mutex_unlock(&sun20i_chip->mutex);
+
+	return 0;
+}
+
+static int sun20i_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
+			    const struct pwm_state *state)
+{
+	struct sun20i_pwm_chip *sun20i_chip = to_sun20i_pwm_chip(chip);
+	u32 clk_gate, clk_cfg, pwm_en, ctl, period;
+	u64 bus_rate, hosc_rate, clk_div, val, tmp;
+	u32 prescaler, div_m;
+	bool use_bus_clk;
+	int ret = 0;
+
+	mutex_lock(&sun20i_chip->mutex);
+
+	pwm_en = sun20i_pwm_readl(sun20i_chip, PWM_ENABLE);
+
+	if (state->enabled != pwm->state.enabled)
+		clk_gate = sun20i_pwm_readl(sun20i_chip, PWM_CLK_GATE);
+
+	if (state->enabled != pwm->state.enabled && !state->enabled) {
+		clk_gate &= ~PWM_CLK_GATE_GATING(pwm->hwpwm);
+		pwm_en &= ~PWM_ENABLE_EN(pwm->hwpwm);
+		sun20i_pwm_writel(sun20i_chip, pwm_en, PWM_ENABLE);
+		sun20i_pwm_writel(sun20i_chip, clk_gate, PWM_CLK_GATE);
+	}
+
+	if (state->polarity != pwm->state.polarity ||
+	    state->duty_cycle != pwm->state.duty_cycle ||
+	    state->period != pwm->state.period) {
+		ctl = sun20i_pwm_readl(sun20i_chip, PWM_CTL(pwm->hwpwm));
+		clk_cfg = sun20i_pwm_readl(sun20i_chip, PWM_CLK_CFG(pwm->hwpwm));
+		hosc_rate = clk_get_rate(sun20i_chip->clk_hosc);
+		bus_rate = clk_get_rate(sun20i_chip->clk_bus);
+		if (pwm_en & PWM_ENABLE_EN(pwm->hwpwm ^ 1)) {
+			/* if the neighbor channel is enable, check period only */
+			use_bus_clk = FIELD_GET(PWM_CLK_CFG_SRC, clk_cfg) != 0;
+			val = state->period * (use_bus_clk ? bus_rate : hosc_rate);
+			do_div(val, NSEC_PER_SEC);
+
+			div_m = FIELD_GET(PWM_CLK_CFG_DIV_M, clk_cfg);
+		} else {
+			/* check period and select clock source */
+			use_bus_clk = false;
+			val = state->period * hosc_rate;
+			do_div(val, NSEC_PER_SEC);
+			if (val <= 1) {
+				use_bus_clk = true;
+				val = state->period * bus_rate;
+				do_div(val, NSEC_PER_SEC);
+				if (val <= 1) {
+					ret = -EINVAL;
+					goto unlock_mutex;
+				}
+			}
+			div_m = fls(DIV_ROUND_DOWN_ULL(val, PWM_MAGIC));
+			if (div_m >= 9) {
+				ret = -EINVAL;
+				goto unlock_mutex;
+			}
+
+			/* set up the CLK_DIV_M and clock CLK_SRC */
+			clk_cfg = FIELD_PREP(PWM_CLK_CFG_DIV_M, div_m);
+			clk_cfg |= FIELD_PREP(PWM_CLK_CFG_SRC, use_bus_clk);
+
+			sun20i_pwm_writel(sun20i_chip, clk_cfg, PWM_CLK_CFG(pwm->hwpwm));
+		}
+
+		/* calculate prescaler, PWM entire cycle */
+		clk_div = val >> div_m;
+		if (clk_div <= 65534) {
+			prescaler = 0;
+		} else {
+			prescaler = DIV_ROUND_UP_ULL(clk_div - 65534, 65535);
+			if (prescaler >= 256) {
+				ret = -EINVAL;
+				goto unlock_mutex;
+			}
+			do_div(clk_div, prescaler + 1);
+		}
+
+		period = FIELD_PREP(PWM_PERIOD_ENTIRE_CYCLE, clk_div);
+
+		/* set duty cycle */
+		val = state->duty_cycle * (use_bus_clk ? bus_rate : hosc_rate);
+		do_div(val, NSEC_PER_SEC);
+		clk_div = val >> div_m;
+		do_div(clk_div, prescaler + 1);
+
+		/*
+		 * The formula of the output period and the duty-cycle for PWM are as follows.
+		 * T period = (PWM01_CLK / PWM0_PRESCALE_K)^-1 * (PPR0.PWM_ENTIRE_CYCLE + 1)
+		 * T high-level = (PWM01_CLK / PWM0_PRESCALE_K)^-1 * PPR0.PWM_ACT_CYCLE
+		 * Duty-cycle = T high-level / T period
+		 * In accordance with this formula, in order to set the duty-cycle to 100%,
+		 * it is necessary that PWM_ACT_CYCLE >= PWM_ENTIRE_CYCLE + 1
+		 */
+		if (state->duty_cycle == state->period)
+			clk_div++;
+		period |= FIELD_PREP(PWM_PERIOD_ACT_CYCLE, clk_div);
+		sun20i_pwm_writel(sun20i_chip, period, PWM_PERIOD(pwm->hwpwm));
+
+		ctl = FIELD_PREP(PWM_CTL_PRESCAL_K, prescaler);
+		if (state->polarity == PWM_POLARITY_NORMAL)
+			ctl |= PWM_CTL_ACT_STA;
+
+		sun20i_pwm_writel(sun20i_chip, ctl, PWM_CTL(pwm->hwpwm));
+	}
+
+	if (state->enabled != pwm->state.enabled && state->enabled) {
+		clk_gate &= ~PWM_CLK_GATE_BYPASS(pwm->hwpwm);
+		clk_gate |= PWM_CLK_GATE_GATING(pwm->hwpwm);
+		pwm_en |= PWM_ENABLE_EN(pwm->hwpwm);
+		sun20i_pwm_writel(sun20i_chip, pwm_en, PWM_ENABLE);
+		sun20i_pwm_writel(sun20i_chip, clk_gate, PWM_CLK_GATE);
+	}
+
+unlock_mutex:
+	mutex_unlock(&sun20i_chip->mutex);
+
+	return ret;
+}
+
+static const struct pwm_ops sun20i_pwm_ops = {
+	.get_state = sun20i_pwm_get_state,
+	.apply = sun20i_pwm_apply,
+	.owner = THIS_MODULE,
+};
+
+static const struct of_device_id sun20i_pwm_dt_ids[] = {
+	{ .compatible = "allwinner,sun20i-d1-pwm" },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, sun20i_pwm_dt_ids);
+
+static int sun20i_pwm_probe(struct platform_device *pdev)
+{
+	struct sun20i_pwm_chip *sun20i_chip;
+	int ret;
+
+	sun20i_chip = devm_kzalloc(&pdev->dev, sizeof(*sun20i_chip), GFP_KERNEL);
+	if (!sun20i_chip)
+		return -ENOMEM;
+
+	sun20i_chip->base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(sun20i_chip->base))
+		return PTR_ERR(sun20i_chip->base);
+
+	sun20i_chip->clk_bus = devm_clk_get_enabled(&pdev->dev, "bus");
+	if (IS_ERR(sun20i_chip->clk_bus))
+		return dev_err_probe(&pdev->dev, PTR_ERR(sun20i_chip->clk_bus),
+				     "failed to get bus clock\n");
+
+	sun20i_chip->clk_hosc = devm_clk_get_enabled(&pdev->dev, "hosc");
+	if (IS_ERR(sun20i_chip->clk_hosc))
+		return dev_err_probe(&pdev->dev, PTR_ERR(sun20i_chip->clk_hosc),
+				     "failed to get hosc clock\n");
+
+	sun20i_chip->rst = devm_reset_control_get_exclusive(&pdev->dev, NULL);
+	if (IS_ERR(sun20i_chip->rst))
+		return dev_err_probe(&pdev->dev, PTR_ERR(sun20i_chip->rst),
+				     "failed to get bus reset\n");
+
+	ret = of_property_read_u32(pdev->dev.of_node, "allwinner,pwm-channels",
+				   &sun20i_chip->chip.npwm);
+	if (ret)
+		sun20i_chip->chip.npwm = 8;
+
+	/* Deassert reset */
+	ret = reset_control_deassert(sun20i_chip->rst);
+	if (ret)
+		return dev_err_probe(&pdev->dev, ret, "failed to deassert reset\n");
+
+	sun20i_chip->chip.dev = &pdev->dev;
+	sun20i_chip->chip.ops = &sun20i_pwm_ops;
+
+	mutex_init(&sun20i_chip->mutex);
+
+	ret = pwmchip_add(&sun20i_chip->chip);
+	if (ret < 0) {
+		reset_control_assert(sun20i_chip->rst);
+		return dev_err_probe(&pdev->dev, ret, "failed to add PWM chip\n");
+	}
+
+	platform_set_drvdata(pdev, sun20i_chip);
+
+	return 0;
+}
+
+static void sun20i_pwm_remove(struct platform_device *pdev)
+{
+	struct sun20i_pwm_chip *sun20i_chip = platform_get_drvdata(pdev);
+
+	pwmchip_remove(&sun20i_chip->chip);
+
+	reset_control_assert(sun20i_chip->rst);
+}
+
+static struct platform_driver sun20i_pwm_driver = {
+	.driver = {
+		.name = "sun20i-pwm",
+		.of_match_table = sun20i_pwm_dt_ids,
+	},
+	.probe = sun20i_pwm_probe,
+	.remove_new = sun20i_pwm_remove,
+};
+module_platform_driver(sun20i_pwm_driver);
+
+MODULE_AUTHOR("Aleksandr Shubin <privatesub2@gmail.com>");
+MODULE_DESCRIPTION("Allwinner sun20i PWM driver");
+MODULE_LICENSE("GPL");