diff mbox series

[v3,8/9] tty: Add SBI debug console support to HVC SBI driver

Message ID 20231020072140.900967-9-apatel@ventanamicro.com (mailing list archive)
State Superseded
Headers show
Series RISC-V SBI debug console extension support | expand

Checks

Context Check Description
conchuod/vmtest-fixes-PR fail merge-conflict

Commit Message

Anup Patel Oct. 20, 2023, 7:21 a.m. UTC 
From: Atish Patra <atishp@rivosinc.com>

RISC-V SBI specification supports advanced debug console
support via SBI DBCN extension.

Extend the HVC SBI driver to support it.

Signed-off-by: Atish Patra <atishp@rivosinc.com>
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
---
 drivers/tty/hvc/Kconfig         |  2 +-
 drivers/tty/hvc/hvc_riscv_sbi.c | 82 ++++++++++++++++++++++++++++++---
 2 files changed, 76 insertions(+), 8 deletions(-)

Comments

Björn Töpel Oct. 20, 2023, 9:55 a.m. UTC | #1 
Anup Patel <apatel@ventanamicro.com> writes:

> From: Atish Patra <atishp@rivosinc.com>
>
> RISC-V SBI specification supports advanced debug console
> support via SBI DBCN extension.
>
> Extend the HVC SBI driver to support it.
>
> Signed-off-by: Atish Patra <atishp@rivosinc.com>
> Signed-off-by: Anup Patel <apatel@ventanamicro.com>
> ---
>  drivers/tty/hvc/Kconfig         |  2 +-
>  drivers/tty/hvc/hvc_riscv_sbi.c | 82 ++++++++++++++++++++++++++++++---
>  2 files changed, 76 insertions(+), 8 deletions(-)
>
> diff --git a/drivers/tty/hvc/Kconfig b/drivers/tty/hvc/Kconfig
> index 4f9264d005c0..6e05c5c7bca1 100644
> --- a/drivers/tty/hvc/Kconfig
> +++ b/drivers/tty/hvc/Kconfig
> @@ -108,7 +108,7 @@ config HVC_DCC_SERIALIZE_SMP
>  
>  config HVC_RISCV_SBI
>  	bool "RISC-V SBI console support"
> -	depends on RISCV_SBI_V01
> +	depends on RISCV_SBI
>  	select HVC_DRIVER
>  	help
>  	  This enables support for console output via RISC-V SBI calls, which
> diff --git a/drivers/tty/hvc/hvc_riscv_sbi.c b/drivers/tty/hvc/hvc_riscv_sbi.c
> index 31f53fa77e4a..56da1a4b5aca 100644
> --- a/drivers/tty/hvc/hvc_riscv_sbi.c
> +++ b/drivers/tty/hvc/hvc_riscv_sbi.c
> @@ -39,21 +39,89 @@ static int hvc_sbi_tty_get(uint32_t vtermno, char *buf, int count)
>  	return i;
>  }
>  
> -static const struct hv_ops hvc_sbi_ops = {
> +static const struct hv_ops hvc_sbi_v01_ops = {
>  	.get_chars = hvc_sbi_tty_get,
>  	.put_chars = hvc_sbi_tty_put,
>  };
>  
> -static int __init hvc_sbi_init(void)
> +static int hvc_sbi_dbcn_tty_put(uint32_t vtermno, const char *buf, int count)
>  {
> -	return PTR_ERR_OR_ZERO(hvc_alloc(0, 0, &hvc_sbi_ops, 16));
> +	phys_addr_t pa;
> +	struct sbiret ret;
> +
> +	if (is_vmalloc_addr(buf)) {
> +		pa = page_to_phys(vmalloc_to_page(buf)) + offset_in_page(buf);
> +		if (PAGE_SIZE < (offset_in_page(buf) + count))
> +			count = PAGE_SIZE - offset_in_page(buf);

Thanks for fixing the cross-page issue. Now you're cutting the buffer
off. What about doing two SBI calls instead? (Dito on the get side)


Björn
Anup Patel Oct. 20, 2023, 10:06 a.m. UTC | #2 
On Fri, Oct 20, 2023 at 3:25 PM Björn Töpel <bjorn@kernel.org> wrote:
>
> Anup Patel <apatel@ventanamicro.com> writes:
>
> > From: Atish Patra <atishp@rivosinc.com>
> >
> > RISC-V SBI specification supports advanced debug console
> > support via SBI DBCN extension.
> >
> > Extend the HVC SBI driver to support it.
> >
> > Signed-off-by: Atish Patra <atishp@rivosinc.com>
> > Signed-off-by: Anup Patel <apatel@ventanamicro.com>
> > ---
> >  drivers/tty/hvc/Kconfig         |  2 +-
> >  drivers/tty/hvc/hvc_riscv_sbi.c | 82 ++++++++++++++++++++++++++++++---
> >  2 files changed, 76 insertions(+), 8 deletions(-)
> >
> > diff --git a/drivers/tty/hvc/Kconfig b/drivers/tty/hvc/Kconfig
> > index 4f9264d005c0..6e05c5c7bca1 100644
> > --- a/drivers/tty/hvc/Kconfig
> > +++ b/drivers/tty/hvc/Kconfig
> > @@ -108,7 +108,7 @@ config HVC_DCC_SERIALIZE_SMP
> >
> >  config HVC_RISCV_SBI
> >       bool "RISC-V SBI console support"
> > -     depends on RISCV_SBI_V01
> > +     depends on RISCV_SBI
> >       select HVC_DRIVER
> >       help
> >         This enables support for console output via RISC-V SBI calls, which
> > diff --git a/drivers/tty/hvc/hvc_riscv_sbi.c b/drivers/tty/hvc/hvc_riscv_sbi.c
> > index 31f53fa77e4a..56da1a4b5aca 100644
> > --- a/drivers/tty/hvc/hvc_riscv_sbi.c
> > +++ b/drivers/tty/hvc/hvc_riscv_sbi.c
> > @@ -39,21 +39,89 @@ static int hvc_sbi_tty_get(uint32_t vtermno, char *buf, int count)
> >       return i;
> >  }
> >
> > -static const struct hv_ops hvc_sbi_ops = {
> > +static const struct hv_ops hvc_sbi_v01_ops = {
> >       .get_chars = hvc_sbi_tty_get,
> >       .put_chars = hvc_sbi_tty_put,
> >  };
> >
> > -static int __init hvc_sbi_init(void)
> > +static int hvc_sbi_dbcn_tty_put(uint32_t vtermno, const char *buf, int count)
> >  {
> > -     return PTR_ERR_OR_ZERO(hvc_alloc(0, 0, &hvc_sbi_ops, 16));
> > +     phys_addr_t pa;
> > +     struct sbiret ret;
> > +
> > +     if (is_vmalloc_addr(buf)) {
> > +             pa = page_to_phys(vmalloc_to_page(buf)) + offset_in_page(buf);
> > +             if (PAGE_SIZE < (offset_in_page(buf) + count))
> > +                     count = PAGE_SIZE - offset_in_page(buf);
>
> Thanks for fixing the cross-page issue. Now you're cutting the buffer
> off. What about doing two SBI calls instead? (Dito on the get side)

We don't need to handle that because the hvc_console framework
will ensure remaining characters are sent-out. Same applies to
get side as well.

Regards,
Anup
Andrew Jones Oct. 20, 2023, 10:46 a.m. UTC | #3 
On Fri, Oct 20, 2023 at 12:51:39PM +0530, Anup Patel wrote:
> From: Atish Patra <atishp@rivosinc.com>
> 
> RISC-V SBI specification supports advanced debug console
> support via SBI DBCN extension.
> 
> Extend the HVC SBI driver to support it.
> 
> Signed-off-by: Atish Patra <atishp@rivosinc.com>
> Signed-off-by: Anup Patel <apatel@ventanamicro.com>
> ---
>  drivers/tty/hvc/Kconfig         |  2 +-
>  drivers/tty/hvc/hvc_riscv_sbi.c | 82 ++++++++++++++++++++++++++++++---
>  2 files changed, 76 insertions(+), 8 deletions(-)
> 
> diff --git a/drivers/tty/hvc/Kconfig b/drivers/tty/hvc/Kconfig
> index 4f9264d005c0..6e05c5c7bca1 100644
> --- a/drivers/tty/hvc/Kconfig
> +++ b/drivers/tty/hvc/Kconfig
> @@ -108,7 +108,7 @@ config HVC_DCC_SERIALIZE_SMP
>  
>  config HVC_RISCV_SBI
>  	bool "RISC-V SBI console support"
> -	depends on RISCV_SBI_V01
> +	depends on RISCV_SBI
>  	select HVC_DRIVER
>  	help
>  	  This enables support for console output via RISC-V SBI calls, which
> diff --git a/drivers/tty/hvc/hvc_riscv_sbi.c b/drivers/tty/hvc/hvc_riscv_sbi.c
> index 31f53fa77e4a..56da1a4b5aca 100644
> --- a/drivers/tty/hvc/hvc_riscv_sbi.c
> +++ b/drivers/tty/hvc/hvc_riscv_sbi.c
> @@ -39,21 +39,89 @@ static int hvc_sbi_tty_get(uint32_t vtermno, char *buf, int count)
>  	return i;
>  }
>  
> -static const struct hv_ops hvc_sbi_ops = {
> +static const struct hv_ops hvc_sbi_v01_ops = {
>  	.get_chars = hvc_sbi_tty_get,
>  	.put_chars = hvc_sbi_tty_put,
>  };
>  
> -static int __init hvc_sbi_init(void)
> +static int hvc_sbi_dbcn_tty_put(uint32_t vtermno, const char *buf, int count)
>  {
> -	return PTR_ERR_OR_ZERO(hvc_alloc(0, 0, &hvc_sbi_ops, 16));
> +	phys_addr_t pa;
> +	struct sbiret ret;
> +
> +	if (is_vmalloc_addr(buf)) {
> +		pa = page_to_phys(vmalloc_to_page(buf)) + offset_in_page(buf);
> +		if (PAGE_SIZE < (offset_in_page(buf) + count))

I thought checkpatch complained about uppercase constants being on the
left in comparisons.

> +			count = PAGE_SIZE - offset_in_page(buf);
> +	} else {
> +		pa = __pa(buf);
> +	}
> +
> +	if (IS_ENABLED(CONFIG_32BIT))
> +		ret = sbi_ecall(SBI_EXT_DBCN, SBI_EXT_DBCN_CONSOLE_WRITE,
> +				count, lower_32_bits(pa), upper_32_bits(pa),
> +				0, 0, 0);
> +	else
> +		ret = sbi_ecall(SBI_EXT_DBCN, SBI_EXT_DBCN_CONSOLE_WRITE,
> +				count, pa, 0, 0, 0, 0);
> +	if (ret.error)
> +		return 0;
> +
> +	return count;

Shouldn't we return ret.value here in case it's less than count? I see we
already do that below in get().

>  }
> -device_initcall(hvc_sbi_init);
>  
> -static int __init hvc_sbi_console_init(void)
> +static int hvc_sbi_dbcn_tty_get(uint32_t vtermno, char *buf, int count)
>  {
> -	hvc_instantiate(0, 0, &hvc_sbi_ops);
> +	phys_addr_t pa;
> +	struct sbiret ret;
> +
> +	if (is_vmalloc_addr(buf)) {
> +		pa = page_to_phys(vmalloc_to_page(buf)) + offset_in_page(buf);
> +		if (PAGE_SIZE < (offset_in_page(buf) + count))
> +			count = PAGE_SIZE - offset_in_page(buf);
> +	} else {
> +		pa = __pa(buf);
> +	}
> +
> +	if (IS_ENABLED(CONFIG_32BIT))
> +		ret = sbi_ecall(SBI_EXT_DBCN, SBI_EXT_DBCN_CONSOLE_READ,
> +				count, lower_32_bits(pa), upper_32_bits(pa),
> +				0, 0, 0);
> +	else
> +		ret = sbi_ecall(SBI_EXT_DBCN, SBI_EXT_DBCN_CONSOLE_READ,
> +				count, pa, 0, 0, 0, 0);
> +	if (ret.error)
> +		return 0;
> +
> +	return ret.value;
> +}
> +
> +static const struct hv_ops hvc_sbi_dbcn_ops = {
> +	.put_chars = hvc_sbi_dbcn_tty_put,
> +	.get_chars = hvc_sbi_dbcn_tty_get,
> +};
> +
> +static int __init hvc_sbi_init(void)
> +{
> +	int err;
> +
> +	if ((sbi_spec_version >= sbi_mk_version(2, 0)) &&
> +	    (sbi_probe_extension(SBI_EXT_DBCN) > 0)) {
> +		err = PTR_ERR_OR_ZERO(hvc_alloc(0, 0, &hvc_sbi_dbcn_ops, 16));

Why an outbuf size of only 16?

> +		if (err)
> +			return err;
> +		hvc_instantiate(0, 0, &hvc_sbi_dbcn_ops);
> +	} else {
> +		if (IS_ENABLED(CONFIG_RISCV_SBI_V01)) {
> +			err = PTR_ERR_OR_ZERO(hvc_alloc(0, 0, &hvc_sbi_v01_ops, 16));
> +			if (err)
> +				return err;
> +			hvc_instantiate(0, 0, &hvc_sbi_v01_ops);
> +		} else {
> +			return -ENODEV;
> +		}
> +	}
>  
>  	return 0;
>  }
> -console_initcall(hvc_sbi_console_init);
> +device_initcall(hvc_sbi_init);
> -- 
> 2.34.1
>

Thanks,
drew
Anup Patel Oct. 20, 2023, 1:47 p.m. UTC | #4 
On Fri, Oct 20, 2023 at 4:16 PM Andrew Jones <ajones@ventanamicro.com> wrote:
>
> On Fri, Oct 20, 2023 at 12:51:39PM +0530, Anup Patel wrote:
> > From: Atish Patra <atishp@rivosinc.com>
> >
> > RISC-V SBI specification supports advanced debug console
> > support via SBI DBCN extension.
> >
> > Extend the HVC SBI driver to support it.
> >
> > Signed-off-by: Atish Patra <atishp@rivosinc.com>
> > Signed-off-by: Anup Patel <apatel@ventanamicro.com>
> > ---
> >  drivers/tty/hvc/Kconfig         |  2 +-
> >  drivers/tty/hvc/hvc_riscv_sbi.c | 82 ++++++++++++++++++++++++++++++---
> >  2 files changed, 76 insertions(+), 8 deletions(-)
> >
> > diff --git a/drivers/tty/hvc/Kconfig b/drivers/tty/hvc/Kconfig
> > index 4f9264d005c0..6e05c5c7bca1 100644
> > --- a/drivers/tty/hvc/Kconfig
> > +++ b/drivers/tty/hvc/Kconfig
> > @@ -108,7 +108,7 @@ config HVC_DCC_SERIALIZE_SMP
> >
> >  config HVC_RISCV_SBI
> >       bool "RISC-V SBI console support"
> > -     depends on RISCV_SBI_V01
> > +     depends on RISCV_SBI
> >       select HVC_DRIVER
> >       help
> >         This enables support for console output via RISC-V SBI calls, which
> > diff --git a/drivers/tty/hvc/hvc_riscv_sbi.c b/drivers/tty/hvc/hvc_riscv_sbi.c
> > index 31f53fa77e4a..56da1a4b5aca 100644
> > --- a/drivers/tty/hvc/hvc_riscv_sbi.c
> > +++ b/drivers/tty/hvc/hvc_riscv_sbi.c
> > @@ -39,21 +39,89 @@ static int hvc_sbi_tty_get(uint32_t vtermno, char *buf, int count)
> >       return i;
> >  }
> >
> > -static const struct hv_ops hvc_sbi_ops = {
> > +static const struct hv_ops hvc_sbi_v01_ops = {
> >       .get_chars = hvc_sbi_tty_get,
> >       .put_chars = hvc_sbi_tty_put,
> >  };
> >
> > -static int __init hvc_sbi_init(void)
> > +static int hvc_sbi_dbcn_tty_put(uint32_t vtermno, const char *buf, int count)
> >  {
> > -     return PTR_ERR_OR_ZERO(hvc_alloc(0, 0, &hvc_sbi_ops, 16));
> > +     phys_addr_t pa;
> > +     struct sbiret ret;
> > +
> > +     if (is_vmalloc_addr(buf)) {
> > +             pa = page_to_phys(vmalloc_to_page(buf)) + offset_in_page(buf);
> > +             if (PAGE_SIZE < (offset_in_page(buf) + count))
>
> I thought checkpatch complained about uppercase constants being on the
> left in comparisons.

Nope checkpatch does not complain about this.

>
> > +                     count = PAGE_SIZE - offset_in_page(buf);
> > +     } else {
> > +             pa = __pa(buf);
> > +     }
> > +
> > +     if (IS_ENABLED(CONFIG_32BIT))
> > +             ret = sbi_ecall(SBI_EXT_DBCN, SBI_EXT_DBCN_CONSOLE_WRITE,
> > +                             count, lower_32_bits(pa), upper_32_bits(pa),
> > +                             0, 0, 0);
> > +     else
> > +             ret = sbi_ecall(SBI_EXT_DBCN, SBI_EXT_DBCN_CONSOLE_WRITE,
> > +                             count, pa, 0, 0, 0, 0);
> > +     if (ret.error)
> > +             return 0;
> > +
> > +     return count;
>
> Shouldn't we return ret.value here in case it's less than count? I see we
> already do that below in get().

Ahh, yes. Good catch, I will update.

>
> >  }
> > -device_initcall(hvc_sbi_init);
> >
> > -static int __init hvc_sbi_console_init(void)
> > +static int hvc_sbi_dbcn_tty_get(uint32_t vtermno, char *buf, int count)
> >  {
> > -     hvc_instantiate(0, 0, &hvc_sbi_ops);
> > +     phys_addr_t pa;
> > +     struct sbiret ret;
> > +
> > +     if (is_vmalloc_addr(buf)) {
> > +             pa = page_to_phys(vmalloc_to_page(buf)) + offset_in_page(buf);
> > +             if (PAGE_SIZE < (offset_in_page(buf) + count))
> > +                     count = PAGE_SIZE - offset_in_page(buf);
> > +     } else {
> > +             pa = __pa(buf);
> > +     }
> > +
> > +     if (IS_ENABLED(CONFIG_32BIT))
> > +             ret = sbi_ecall(SBI_EXT_DBCN, SBI_EXT_DBCN_CONSOLE_READ,
> > +                             count, lower_32_bits(pa), upper_32_bits(pa),
> > +                             0, 0, 0);
> > +     else
> > +             ret = sbi_ecall(SBI_EXT_DBCN, SBI_EXT_DBCN_CONSOLE_READ,
> > +                             count, pa, 0, 0, 0, 0);
> > +     if (ret.error)
> > +             return 0;
> > +
> > +     return ret.value;
> > +}
> > +
> > +static const struct hv_ops hvc_sbi_dbcn_ops = {
> > +     .put_chars = hvc_sbi_dbcn_tty_put,
> > +     .get_chars = hvc_sbi_dbcn_tty_get,
> > +};
> > +
> > +static int __init hvc_sbi_init(void)
> > +{
> > +     int err;
> > +
> > +     if ((sbi_spec_version >= sbi_mk_version(2, 0)) &&
> > +         (sbi_probe_extension(SBI_EXT_DBCN) > 0)) {
> > +             err = PTR_ERR_OR_ZERO(hvc_alloc(0, 0, &hvc_sbi_dbcn_ops, 16));
>
> Why an outbuf size of only 16?

The output buffer size of 16 is a very common choice across
HVC drivers. The next best choice is 256.

I guess 256 is better so I will go with that.

>
> > +             if (err)
> > +                     return err;
> > +             hvc_instantiate(0, 0, &hvc_sbi_dbcn_ops);
> > +     } else {
> > +             if (IS_ENABLED(CONFIG_RISCV_SBI_V01)) {
> > +                     err = PTR_ERR_OR_ZERO(hvc_alloc(0, 0, &hvc_sbi_v01_ops, 16));
> > +                     if (err)
> > +                             return err;
> > +                     hvc_instantiate(0, 0, &hvc_sbi_v01_ops);
> > +             } else {
> > +                     return -ENODEV;
> > +             }
> > +     }
> >
> >       return 0;
> >  }
> > -console_initcall(hvc_sbi_console_init);
> > +device_initcall(hvc_sbi_init);
> > --
> > 2.34.1
> >
>
> Thanks,
> drew

Regards,
Anup
Greg Kroah-Hartman Oct. 21, 2023, 4:46 p.m. UTC | #5 
On Fri, Oct 20, 2023 at 12:51:39PM +0530, Anup Patel wrote:
> From: Atish Patra <atishp@rivosinc.com>
> 
> RISC-V SBI specification supports advanced debug console
> support via SBI DBCN extension.
> 
> Extend the HVC SBI driver to support it.
> 
> Signed-off-by: Atish Patra <atishp@rivosinc.com>
> Signed-off-by: Anup Patel <apatel@ventanamicro.com>
> ---
>  drivers/tty/hvc/Kconfig         |  2 +-
>  drivers/tty/hvc/hvc_riscv_sbi.c | 82 ++++++++++++++++++++++++++++++---
>  2 files changed, 76 insertions(+), 8 deletions(-)
> 
> diff --git a/drivers/tty/hvc/Kconfig b/drivers/tty/hvc/Kconfig
> index 4f9264d005c0..6e05c5c7bca1 100644
> --- a/drivers/tty/hvc/Kconfig
> +++ b/drivers/tty/hvc/Kconfig
> @@ -108,7 +108,7 @@ config HVC_DCC_SERIALIZE_SMP
>  
>  config HVC_RISCV_SBI
>  	bool "RISC-V SBI console support"
> -	depends on RISCV_SBI_V01
> +	depends on RISCV_SBI
>  	select HVC_DRIVER
>  	help
>  	  This enables support for console output via RISC-V SBI calls, which
> diff --git a/drivers/tty/hvc/hvc_riscv_sbi.c b/drivers/tty/hvc/hvc_riscv_sbi.c
> index 31f53fa77e4a..56da1a4b5aca 100644
> --- a/drivers/tty/hvc/hvc_riscv_sbi.c
> +++ b/drivers/tty/hvc/hvc_riscv_sbi.c
> @@ -39,21 +39,89 @@ static int hvc_sbi_tty_get(uint32_t vtermno, char *buf, int count)
>  	return i;
>  }
>  
> -static const struct hv_ops hvc_sbi_ops = {
> +static const struct hv_ops hvc_sbi_v01_ops = {
>  	.get_chars = hvc_sbi_tty_get,
>  	.put_chars = hvc_sbi_tty_put,
>  };
>  
> -static int __init hvc_sbi_init(void)
> +static int hvc_sbi_dbcn_tty_put(uint32_t vtermno, const char *buf, int count)
>  {
> -	return PTR_ERR_OR_ZERO(hvc_alloc(0, 0, &hvc_sbi_ops, 16));
> +	phys_addr_t pa;
> +	struct sbiret ret;
> +
> +	if (is_vmalloc_addr(buf)) {
> +		pa = page_to_phys(vmalloc_to_page(buf)) + offset_in_page(buf);
> +		if (PAGE_SIZE < (offset_in_page(buf) + count))
> +			count = PAGE_SIZE - offset_in_page(buf);
> +	} else {
> +		pa = __pa(buf);
> +	}
> +
> +	if (IS_ENABLED(CONFIG_32BIT))
> +		ret = sbi_ecall(SBI_EXT_DBCN, SBI_EXT_DBCN_CONSOLE_WRITE,
> +				count, lower_32_bits(pa), upper_32_bits(pa),
> +				0, 0, 0);
> +	else
> +		ret = sbi_ecall(SBI_EXT_DBCN, SBI_EXT_DBCN_CONSOLE_WRITE,
> +				count, pa, 0, 0, 0, 0);

Again, you need a helper function here to keep you from having to keep
this all in sync.

> +	if (ret.error)
> +		return 0;
> +
> +	return count;
>  }
> -device_initcall(hvc_sbi_init);
>  
> -static int __init hvc_sbi_console_init(void)
> +static int hvc_sbi_dbcn_tty_get(uint32_t vtermno, char *buf, int count)
>  {
> -	hvc_instantiate(0, 0, &hvc_sbi_ops);
> +	phys_addr_t pa;
> +	struct sbiret ret;
> +
> +	if (is_vmalloc_addr(buf)) {
> +		pa = page_to_phys(vmalloc_to_page(buf)) + offset_in_page(buf);
> +		if (PAGE_SIZE < (offset_in_page(buf) + count))
> +			count = PAGE_SIZE - offset_in_page(buf);
> +	} else {
> +		pa = __pa(buf);
> +	}
> +
> +	if (IS_ENABLED(CONFIG_32BIT))
> +		ret = sbi_ecall(SBI_EXT_DBCN, SBI_EXT_DBCN_CONSOLE_READ,
> +				count, lower_32_bits(pa), upper_32_bits(pa),
> +				0, 0, 0);
> +	else
> +		ret = sbi_ecall(SBI_EXT_DBCN, SBI_EXT_DBCN_CONSOLE_READ,
> +				count, pa, 0, 0, 0, 0);

And here too.

thanks,

greg k-h
Anup Patel Nov. 17, 2023, 1:11 p.m. UTC | #6 
On Sat, Oct 21, 2023 at 10:16 PM Greg Kroah-Hartman
<gregkh@linuxfoundation.org> wrote:
>
> On Fri, Oct 20, 2023 at 12:51:39PM +0530, Anup Patel wrote:
> > From: Atish Patra <atishp@rivosinc.com>
> >
> > RISC-V SBI specification supports advanced debug console
> > support via SBI DBCN extension.
> >
> > Extend the HVC SBI driver to support it.
> >
> > Signed-off-by: Atish Patra <atishp@rivosinc.com>
> > Signed-off-by: Anup Patel <apatel@ventanamicro.com>
> > ---
> >  drivers/tty/hvc/Kconfig         |  2 +-
> >  drivers/tty/hvc/hvc_riscv_sbi.c | 82 ++++++++++++++++++++++++++++++---
> >  2 files changed, 76 insertions(+), 8 deletions(-)
> >
> > diff --git a/drivers/tty/hvc/Kconfig b/drivers/tty/hvc/Kconfig
> > index 4f9264d005c0..6e05c5c7bca1 100644
> > --- a/drivers/tty/hvc/Kconfig
> > +++ b/drivers/tty/hvc/Kconfig
> > @@ -108,7 +108,7 @@ config HVC_DCC_SERIALIZE_SMP
> >
> >  config HVC_RISCV_SBI
> >       bool "RISC-V SBI console support"
> > -     depends on RISCV_SBI_V01
> > +     depends on RISCV_SBI
> >       select HVC_DRIVER
> >       help
> >         This enables support for console output via RISC-V SBI calls, which
> > diff --git a/drivers/tty/hvc/hvc_riscv_sbi.c b/drivers/tty/hvc/hvc_riscv_sbi.c
> > index 31f53fa77e4a..56da1a4b5aca 100644
> > --- a/drivers/tty/hvc/hvc_riscv_sbi.c
> > +++ b/drivers/tty/hvc/hvc_riscv_sbi.c
> > @@ -39,21 +39,89 @@ static int hvc_sbi_tty_get(uint32_t vtermno, char *buf, int count)
> >       return i;
> >  }
> >
> > -static const struct hv_ops hvc_sbi_ops = {
> > +static const struct hv_ops hvc_sbi_v01_ops = {
> >       .get_chars = hvc_sbi_tty_get,
> >       .put_chars = hvc_sbi_tty_put,
> >  };
> >
> > -static int __init hvc_sbi_init(void)
> > +static int hvc_sbi_dbcn_tty_put(uint32_t vtermno, const char *buf, int count)
> >  {
> > -     return PTR_ERR_OR_ZERO(hvc_alloc(0, 0, &hvc_sbi_ops, 16));
> > +     phys_addr_t pa;
> > +     struct sbiret ret;
> > +
> > +     if (is_vmalloc_addr(buf)) {
> > +             pa = page_to_phys(vmalloc_to_page(buf)) + offset_in_page(buf);
> > +             if (PAGE_SIZE < (offset_in_page(buf) + count))
> > +                     count = PAGE_SIZE - offset_in_page(buf);
> > +     } else {
> > +             pa = __pa(buf);
> > +     }
> > +
> > +     if (IS_ENABLED(CONFIG_32BIT))
> > +             ret = sbi_ecall(SBI_EXT_DBCN, SBI_EXT_DBCN_CONSOLE_WRITE,
> > +                             count, lower_32_bits(pa), upper_32_bits(pa),
> > +                             0, 0, 0);
> > +     else
> > +             ret = sbi_ecall(SBI_EXT_DBCN, SBI_EXT_DBCN_CONSOLE_WRITE,
> > +                             count, pa, 0, 0, 0, 0);
>
> Again, you need a helper function here to keep you from having to keep
> this all in sync.

Sure, I will update.

>
> > +     if (ret.error)
> > +             return 0;
> > +
> > +     return count;
> >  }
> > -device_initcall(hvc_sbi_init);
> >
> > -static int __init hvc_sbi_console_init(void)
> > +static int hvc_sbi_dbcn_tty_get(uint32_t vtermno, char *buf, int count)
> >  {
> > -     hvc_instantiate(0, 0, &hvc_sbi_ops);
> > +     phys_addr_t pa;
> > +     struct sbiret ret;
> > +
> > +     if (is_vmalloc_addr(buf)) {
> > +             pa = page_to_phys(vmalloc_to_page(buf)) + offset_in_page(buf);
> > +             if (PAGE_SIZE < (offset_in_page(buf) + count))
> > +                     count = PAGE_SIZE - offset_in_page(buf);
> > +     } else {
> > +             pa = __pa(buf);
> > +     }
> > +
> > +     if (IS_ENABLED(CONFIG_32BIT))
> > +             ret = sbi_ecall(SBI_EXT_DBCN, SBI_EXT_DBCN_CONSOLE_READ,
> > +                             count, lower_32_bits(pa), upper_32_bits(pa),
> > +                             0, 0, 0);
> > +     else
> > +             ret = sbi_ecall(SBI_EXT_DBCN, SBI_EXT_DBCN_CONSOLE_READ,
> > +                             count, pa, 0, 0, 0, 0);
>
> And here too.

Okay.

>
> thanks,
>
> greg k-h

Regards,
Anup
diff mbox series

Patch

diff --git a/drivers/tty/hvc/Kconfig b/drivers/tty/hvc/Kconfig
index 4f9264d005c0..6e05c5c7bca1 100644
--- a/drivers/tty/hvc/Kconfig
+++ b/drivers/tty/hvc/Kconfig
@@ -108,7 +108,7 @@  config HVC_DCC_SERIALIZE_SMP
 
 config HVC_RISCV_SBI
 	bool "RISC-V SBI console support"
-	depends on RISCV_SBI_V01
+	depends on RISCV_SBI
 	select HVC_DRIVER
 	help
 	  This enables support for console output via RISC-V SBI calls, which
diff --git a/drivers/tty/hvc/hvc_riscv_sbi.c b/drivers/tty/hvc/hvc_riscv_sbi.c
index 31f53fa77e4a..56da1a4b5aca 100644
--- a/drivers/tty/hvc/hvc_riscv_sbi.c
+++ b/drivers/tty/hvc/hvc_riscv_sbi.c
@@ -39,21 +39,89 @@  static int hvc_sbi_tty_get(uint32_t vtermno, char *buf, int count)
 	return i;
 }
 
-static const struct hv_ops hvc_sbi_ops = {
+static const struct hv_ops hvc_sbi_v01_ops = {
 	.get_chars = hvc_sbi_tty_get,
 	.put_chars = hvc_sbi_tty_put,
 };
 
-static int __init hvc_sbi_init(void)
+static int hvc_sbi_dbcn_tty_put(uint32_t vtermno, const char *buf, int count)
 {
-	return PTR_ERR_OR_ZERO(hvc_alloc(0, 0, &hvc_sbi_ops, 16));
+	phys_addr_t pa;
+	struct sbiret ret;
+
+	if (is_vmalloc_addr(buf)) {
+		pa = page_to_phys(vmalloc_to_page(buf)) + offset_in_page(buf);
+		if (PAGE_SIZE < (offset_in_page(buf) + count))
+			count = PAGE_SIZE - offset_in_page(buf);
+	} else {
+		pa = __pa(buf);
+	}
+
+	if (IS_ENABLED(CONFIG_32BIT))
+		ret = sbi_ecall(SBI_EXT_DBCN, SBI_EXT_DBCN_CONSOLE_WRITE,
+				count, lower_32_bits(pa), upper_32_bits(pa),
+				0, 0, 0);
+	else
+		ret = sbi_ecall(SBI_EXT_DBCN, SBI_EXT_DBCN_CONSOLE_WRITE,
+				count, pa, 0, 0, 0, 0);
+	if (ret.error)
+		return 0;
+
+	return count;
 }
-device_initcall(hvc_sbi_init);
 
-static int __init hvc_sbi_console_init(void)
+static int hvc_sbi_dbcn_tty_get(uint32_t vtermno, char *buf, int count)
 {
-	hvc_instantiate(0, 0, &hvc_sbi_ops);
+	phys_addr_t pa;
+	struct sbiret ret;
+
+	if (is_vmalloc_addr(buf)) {
+		pa = page_to_phys(vmalloc_to_page(buf)) + offset_in_page(buf);
+		if (PAGE_SIZE < (offset_in_page(buf) + count))
+			count = PAGE_SIZE - offset_in_page(buf);
+	} else {
+		pa = __pa(buf);
+	}
+
+	if (IS_ENABLED(CONFIG_32BIT))
+		ret = sbi_ecall(SBI_EXT_DBCN, SBI_EXT_DBCN_CONSOLE_READ,
+				count, lower_32_bits(pa), upper_32_bits(pa),
+				0, 0, 0);
+	else
+		ret = sbi_ecall(SBI_EXT_DBCN, SBI_EXT_DBCN_CONSOLE_READ,
+				count, pa, 0, 0, 0, 0);
+	if (ret.error)
+		return 0;
+
+	return ret.value;
+}
+
+static const struct hv_ops hvc_sbi_dbcn_ops = {
+	.put_chars = hvc_sbi_dbcn_tty_put,
+	.get_chars = hvc_sbi_dbcn_tty_get,
+};
+
+static int __init hvc_sbi_init(void)
+{
+	int err;
+
+	if ((sbi_spec_version >= sbi_mk_version(2, 0)) &&
+	    (sbi_probe_extension(SBI_EXT_DBCN) > 0)) {
+		err = PTR_ERR_OR_ZERO(hvc_alloc(0, 0, &hvc_sbi_dbcn_ops, 16));
+		if (err)
+			return err;
+		hvc_instantiate(0, 0, &hvc_sbi_dbcn_ops);
+	} else {
+		if (IS_ENABLED(CONFIG_RISCV_SBI_V01)) {
+			err = PTR_ERR_OR_ZERO(hvc_alloc(0, 0, &hvc_sbi_v01_ops, 16));
+			if (err)
+				return err;
+			hvc_instantiate(0, 0, &hvc_sbi_v01_ops);
+		} else {
+			return -ENODEV;
+		}
+	}
 
 	return 0;
 }
-console_initcall(hvc_sbi_console_init);
+device_initcall(hvc_sbi_init);