diff mbox series

[v1,3/5] firmware: microchip: clarify that sizes and addresses are in hex

Message ID 20240410-elk-staleness-285063ef0433@spud (mailing list archive)
State Accepted
Delegated to: Conor Dooley
Headers show
Series PolarFire SoC Auto Update design info support | expand

Checks

Context Check Description
conchuod/vmtest-fixes-PR fail merge-conflict

Commit Message

Conor Dooley April 10, 2024, 11:58 a.m. UTC
From: Conor Dooley <conor.dooley@microchip.com>

As it says on the tin. It can be kinda confusing when "22830" is in hex,
so prefix the hex numbers with a "0x".

Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
---
 drivers/firmware/microchip/mpfs-auto-update.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)
diff mbox series

Patch

diff --git a/drivers/firmware/microchip/mpfs-auto-update.c b/drivers/firmware/microchip/mpfs-auto-update.c
index 298ad21e139b..078ff328f261 100644
--- a/drivers/firmware/microchip/mpfs-auto-update.c
+++ b/drivers/firmware/microchip/mpfs-auto-update.c
@@ -279,7 +279,7 @@  static int mpfs_auto_update_set_image_address(struct mpfs_auto_update_priv *priv
 	       AUTO_UPDATE_DIRECTORY_WIDTH);
 	memset(buffer + AUTO_UPDATE_BLANK_DIRECTORY, 0x0, AUTO_UPDATE_DIRECTORY_WIDTH);
 
-	dev_info(priv->dev, "Writing the image address (%x) to the flash directory (%llx)\n",
+	dev_info(priv->dev, "Writing the image address (0x%x) to the flash directory (0x%llx)\n",
 		 image_address, directory_address);
 
 	ret = mtd_write(priv->flash, 0x0, erase_size, &bytes_written, (u_char *)buffer);
@@ -342,7 +342,7 @@  static int mpfs_auto_update_write_bitstream(struct fw_upload *fw_uploader, const
 	erase.len = round_up(size, (size_t)priv->flash->erasesize);
 	erase.addr = image_address;
 
-	dev_info(priv->dev, "Erasing the flash at address (%x)\n", image_address);
+	dev_info(priv->dev, "Erasing the flash at address (0x%x)\n", image_address);
 	ret = mtd_erase(priv->flash, &erase);
 	if (ret)
 		goto out;
@@ -352,7 +352,7 @@  static int mpfs_auto_update_write_bitstream(struct fw_upload *fw_uploader, const
 	 * will do all of that itself - including verifying that the bitstream
 	 * is valid.
 	 */
-	dev_info(priv->dev, "Writing the image to the flash at address (%x)\n", image_address);
+	dev_info(priv->dev, "Writing the image to the flash at address (0x%x)\n", image_address);
 	ret = mtd_write(priv->flash, (loff_t)image_address, size, &bytes_written, data);
 	if (ret)
 		goto out;