| Message ID | 20240501-spearman-primary-17df3c21c770@spud (mailing list archive) |
|---|---|
| State | Accepted |
| Headers | show |
| Series | riscv: dts: microchip: add pac1934 power-monitor to icicle | expand |
On Wed, May 01, 2024 at 04:36:31PM +0100, Conor Dooley wrote: > From: Conor Dooley <conor.dooley@microchip.com> > > The binding for this landed in v6.9, add the description. In the > off-chance that there were people carrying local patches for this based > on the driver shipped on the Microchip website (or vendor kernel) both > the binding and sysfs filenames changed during upstreaming. > > Signed-off-by: Conor Dooley <conor.dooley@microchip.com> > --- > CC: Conor Dooley <conor.dooley@microchip.com> > CC: Daire McNamara <daire.mcnamara@microchip.com> > CC: Rob Herring <robh@kernel.org> > CC: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org> > CC: linux-riscv@lists.infradead.org > CC: devicetree@vger.kernel.org > CC: linux-kernel@vger.kernel.org I thought I send this out last week, but I could not find the patch on either lore or patchwork when I went to apply it today, so I must not have... > --- > .../boot/dts/microchip/mpfs-icicle-kit.dts | 32 +++++++++++++++++++ > 1 file changed, 32 insertions(+) > > diff --git a/arch/riscv/boot/dts/microchip/mpfs-icicle-kit.dts b/arch/riscv/boot/dts/microchip/mpfs-icicle-kit.dts > index 222a39d90f85..f80df225f72b 100644 > --- a/arch/riscv/boot/dts/microchip/mpfs-icicle-kit.dts > +++ b/arch/riscv/boot/dts/microchip/mpfs-icicle-kit.dts > @@ -100,6 +100,38 @@ &i2c0 { > > &i2c1 { > status = "okay"; > + > + power-monitor@10 { > + compatible = "microchip,pac1934"; > + reg = <0x10>; > + > + #address-cells = <1>; > + #size-cells = <0>; > + > + channel@1 { > + reg = <0x1>; > + shunt-resistor-micro-ohms = <10000>; > + label = "VDDREG"; > + }; > + > + channel@2 { > + reg = <0x2>; > + shunt-resistor-micro-ohms = <10000>; > + label = "VDDA25"; > + }; > + > + channel@3 { > + reg = <0x3>; > + shunt-resistor-micro-ohms = <10000>; > + label = "VDD25"; > + }; > + > + channel@4 { > + reg = <0x4>; > + shunt-resistor-micro-ohms = <10000>; > + label = "VDDA_REG"; > + }; > + }; > }; > > &i2c2 { > -- > 2.43.0 >
From: Conor Dooley <conor.dooley@microchip.com> On Wed, 01 May 2024 16:36:31 +0100, Conor Dooley wrote: > The binding for this landed in v6.9, add the description. In the > off-chance that there were people carrying local patches for this based > on the driver shipped on the Microchip website (or vendor kernel) both > the binding and sysfs filenames changed during upstreaming. > > Applied to riscv-dt-for-next, thanks! [1/1] riscv: dts: microchip: add pac1934 power-monitor to icicle https://git.kernel.org/conor/c/8fd63d81a760 Thanks, Conor.
diff --git a/arch/riscv/boot/dts/microchip/mpfs-icicle-kit.dts b/arch/riscv/boot/dts/microchip/mpfs-icicle-kit.dts index 222a39d90f85..f80df225f72b 100644 --- a/arch/riscv/boot/dts/microchip/mpfs-icicle-kit.dts +++ b/arch/riscv/boot/dts/microchip/mpfs-icicle-kit.dts @@ -100,6 +100,38 @@ &i2c0 { &i2c1 { status = "okay"; + + power-monitor@10 { + compatible = "microchip,pac1934"; + reg = <0x10>; + + #address-cells = <1>; + #size-cells = <0>; + + channel@1 { + reg = <0x1>; + shunt-resistor-micro-ohms = <10000>; + label = "VDDREG"; + }; + + channel@2 { + reg = <0x2>; + shunt-resistor-micro-ohms = <10000>; + label = "VDDA25"; + }; + + channel@3 { + reg = <0x3>; + shunt-resistor-micro-ohms = <10000>; + label = "VDD25"; + }; + + channel@4 { + reg = <0x4>; + shunt-resistor-micro-ohms = <10000>; + label = "VDDA_REG"; + }; + }; }; &i2c2 {