diff mbox series

[v3,2/4] pinctrl: spacemit: add support for SpacemiT K1 SoC

Message ID 20240828-02-k1-pinctrl-v3-2-1fed6a22be98@gentoo.org (mailing list archive)
State Superseded
Delegated to: Conor Dooley
Headers show
Series riscv: spacemit: add pinctrl support to K1 SoC | expand

Checks

Context Check Description
conchuod/vmtest-fixes-PR fail merge-conflict

Commit Message

Yixun Lan Aug. 28, 2024, 11:30 a.m. UTC
SpacemiT's K1 SoC has a pinctrl controller which use single register
to describe all functions, which include bias pull up/down(strong pull),
drive strength, schmitter trigger, slew rate, mux mode.

Signed-off-by: Yixun Lan <dlan@gentoo.org>
---
 drivers/pinctrl/Kconfig               |   1 +
 drivers/pinctrl/Makefile              |   1 +
 drivers/pinctrl/spacemit/Kconfig      |  17 +
 drivers/pinctrl/spacemit/Makefile     |   3 +
 drivers/pinctrl/spacemit/pinctrl-k1.c | 978 ++++++++++++++++++++++++++++++++++
 drivers/pinctrl/spacemit/pinctrl-k1.h | 180 +++++++
 6 files changed, 1180 insertions(+)

Comments

Inochi Amaoto Aug. 30, 2024, 1:46 a.m. UTC | #1
On Wed, Aug 28, 2024 at 11:30:24AM GMT, Yixun Lan wrote:
> SpacemiT's K1 SoC has a pinctrl controller which use single register
> to describe all functions, which include bias pull up/down(strong pull),
> drive strength, schmitter trigger, slew rate, mux mode.
> 
> Signed-off-by: Yixun Lan <dlan@gentoo.org>
> ---
>  drivers/pinctrl/Kconfig               |   1 +
>  drivers/pinctrl/Makefile              |   1 +
>  drivers/pinctrl/spacemit/Kconfig      |  17 +
>  drivers/pinctrl/spacemit/Makefile     |   3 +
>  drivers/pinctrl/spacemit/pinctrl-k1.c | 978 ++++++++++++++++++++++++++++++++++
>  drivers/pinctrl/spacemit/pinctrl-k1.h | 180 +++++++
>  6 files changed, 1180 insertions(+)
> 
> diff --git a/drivers/pinctrl/Kconfig b/drivers/pinctrl/Kconfig
> index 7e4f93a3bc7ac..8358da47cd00d 100644
> --- a/drivers/pinctrl/Kconfig
> +++ b/drivers/pinctrl/Kconfig
> @@ -583,6 +583,7 @@ source "drivers/pinctrl/qcom/Kconfig"
>  source "drivers/pinctrl/realtek/Kconfig"
>  source "drivers/pinctrl/renesas/Kconfig"
>  source "drivers/pinctrl/samsung/Kconfig"
> +source "drivers/pinctrl/spacemit/Kconfig"
>  source "drivers/pinctrl/spear/Kconfig"
>  source "drivers/pinctrl/sprd/Kconfig"
>  source "drivers/pinctrl/starfive/Kconfig"
> diff --git a/drivers/pinctrl/Makefile b/drivers/pinctrl/Makefile
> index cc809669405ab..553beead7ffa0 100644
> --- a/drivers/pinctrl/Makefile
> +++ b/drivers/pinctrl/Makefile
> @@ -73,6 +73,7 @@ obj-y				+= qcom/
>  obj-$(CONFIG_ARCH_REALTEK)      += realtek/
>  obj-$(CONFIG_PINCTRL_RENESAS)	+= renesas/
>  obj-$(CONFIG_PINCTRL_SAMSUNG)	+= samsung/
> +obj-y				+= spacemit/
>  obj-$(CONFIG_PINCTRL_SPEAR)	+= spear/
>  obj-y				+= sprd/
>  obj-$(CONFIG_SOC_STARFIVE)	+= starfive/
> diff --git a/drivers/pinctrl/spacemit/Kconfig b/drivers/pinctrl/spacemit/Kconfig
> new file mode 100644
> index 0000000000000..168f8a5ffbb95
> --- /dev/null
> +++ b/drivers/pinctrl/spacemit/Kconfig
> @@ -0,0 +1,17 @@
> +# SPDX-License-Identifier: GPL-2.0-only
> +#
> +# Sophgo SoC PINCTRL drivers
> +#
> +
> +config PINCTRL_SPACEMIT_K1
> +	tristate "SpacemiT K1 SoC Pinctrl driver"
> +	depends on ARCH_SPACEMIT || COMPILE_TEST
> +	depends on OF
> +	select GENERIC_PINCTRL_GROUPS
> +	select GENERIC_PINMUX_FUNCTIONS
> +	select GENERIC_PINCONF
> +	help
> +	  Say Y to select the pinctrl driver for K1 SoC.
> +	  This pin controller allows selecting the mux function for
> +	  each pin. This driver can also be built as a module called
> +	  pinctrl-k1.
> diff --git a/drivers/pinctrl/spacemit/Makefile b/drivers/pinctrl/spacemit/Makefile
> new file mode 100644
> index 0000000000000..fede1e80fe0ff
> --- /dev/null
> +++ b/drivers/pinctrl/spacemit/Makefile
> @@ -0,0 +1,3 @@
> +# SPDX-License-Identifier: GPL-2.0
> +
> +obj-$(CONFIG_PINCTRL_SPACEMIT_K1)	+= pinctrl-k1.o
> diff --git a/drivers/pinctrl/spacemit/pinctrl-k1.c b/drivers/pinctrl/spacemit/pinctrl-k1.c
> new file mode 100644
> index 0000000000000..9faac5a629c38
> --- /dev/null
> +++ b/drivers/pinctrl/spacemit/pinctrl-k1.c
> @@ -0,0 +1,978 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/* Copyright (c) 2024 Yixun Lan <dlan@gentoo.org> */
> +
> +#include <linux/bitfield.h>
> +#include <linux/export.h>
> +#include <linux/io.h>
> +#include <linux/of.h>
> +#include <linux/platform_device.h>
> +#include <linux/seq_file.h>
> +#include <linux/spinlock.h>
> +#include <linux/module.h>
> +
> +#include <linux/pinctrl/consumer.h>
> +#include <linux/pinctrl/machine.h>
> +#include <linux/pinctrl/pinconf-generic.h>
> +#include <linux/pinctrl/pinconf.h>
> +#include <linux/pinctrl/pinctrl.h>
> +#include <linux/pinctrl/pinmux.h>
> +
> +#include "../core.h"
> +#include "../pinctrl-utils.h"
> +#include "../pinconf.h"
> +#include "../pinmux.h"
> +#include "pinctrl-k1.h"
> +
> +/*
> + * +---------+----------+-----------+--------+--------+----------+--------+
> + * |   pull  |   drive  | schmitter |  slew  |  edge  |  strong  |   mux  |
> + * | up/down | strength |  trigger  |  rate  | detect |   pull   |  mode  |
> + * +---------+----------+-----------+--------+--------+----------+--------+
> + *   3 bits     3 bits     2 bits     1 bit    3 bits     1 bit    3 bits
> + */
> +
> +#define PAD_MUX			GENMASK(2, 0)
> +#define PAD_STRONG_PULL		BIT(3)
> +#define PAD_EDGE_RISE		BIT(4)
> +#define PAD_EDGE_FALL		BIT(5)
> +#define PAD_EDGE_CLEAR		BIT(6)
> +#define PAD_SLEW_RATE		GENMASK(12, 11)
> +#define PAD_SLEW_RATE_EN	BIT(7)
> +#define PAD_SCHMITT		GENMASK(9, 8)
> +#define PAD_DRIVE		GENMASK(12, 10)
> +#define PAD_PULLDOWN		BIT(13)
> +#define PAD_PULLUP		BIT(14)
> +#define PAD_PULL_EN		BIT(15)
> +
> +#define spacemit_pin_to_reg(pctrl, pin)		((pctrl)->regs + (pin << 2))
> +
> +struct spacemit_pin {
> +	u16				pin;
> +	u16				flags;
> +	u8				gpiofunc;
> +};
> +
> +struct spacemit_pinctrl {
> +	struct device				*dev;
> +	struct pinctrl_dev			*pctl_dev;
> +	const struct spacemit_pinctrl_data	*data;
> +	struct pinctrl_desc			pdesc;
> +
> +	struct mutex				mutex;
> +	raw_spinlock_t				lock;
> +
> +	void __iomem				*regs;
> +};
> +
> +struct spacemit_pinctrl_data {
> +	const struct pinctrl_pin_desc   *pins;
> +	const struct spacemit_pin	*data;
> +	u16				npins;
> +};
> +
> +struct spacemit_pin_mux_config {
> +	const struct spacemit_pin	*pin;
> +	u32		config;
> +};
> +
> +struct spacemit_pin_drv_strength {
> +	u8		val;
> +	u32		mA;
> +};
> +
> +static unsigned int spacemit_dt_get_pin(u32 value)
> +{
> +	return (value >> 16) & GENMASK(15, 0);
> +}
> +
> +static unsigned int spacemit_dt_get_pin_mux(u32 value)
> +{
> +	return value & GENMASK(15, 0);
> +}
> +
> +static const struct spacemit_pin *spacemit_get_pin(struct spacemit_pinctrl *pctrl,
> +						   unsigned long pin)
> +{
> +	const struct spacemit_pin *pdata = pctrl->data->data;
> +	int i;
> +
> +	for (i = 0; i < pctrl->data->npins; i++) {
> +		if (pin == pdata[i].pin)
> +			return &pdata[i];
> +	}
> +
> +	return NULL;
> +}
> +
> +static inline enum spacemit_pin_io_type spacemit_to_pin_io_type(
> +	const struct spacemit_pin *pin)
> +{
> +	return K1_PIN_GET_IO_TYPE(pin->flags);
> +}
> +
> +/* External: IO voltage via external source, can be 1.8V or 3.3V */
> +static const char * const io_type_desc[] = {
> +	"None",
> +	"Fixed/1V8",
> +	"Fixed/3V3",
> +	"External",
> +};
> +
> +static void spacemit_pctrl_dbg_show(struct pinctrl_dev *pctldev,
> +				    struct seq_file *seq, unsigned int pin)
> +{
> +	struct spacemit_pinctrl *pctrl = pinctrl_dev_get_drvdata(pctldev);
> +	const struct spacemit_pin *spin = spacemit_get_pin(pctrl, pin);
> +	enum spacemit_pin_io_type type = spacemit_to_pin_io_type(spin);
> +	void __iomem *reg;
> +	u32 value;
> +
> +	seq_printf(seq, "pin: %u ", spin->pin);
> +
> +	seq_printf(seq, "type: %s ", io_type_desc[type]);
> +
> +	reg = spacemit_pin_to_reg(pctrl, spin->pin);
> +	value = readl(reg);
> +	seq_printf(seq, "mux: %ld reg: 0x%04x", (value & PAD_MUX), value);
> +}
> +
> +/* use IO high level output current as the table */
> +static struct spacemit_pin_drv_strength spacemit_ds_1v8_tbl[4] = {
> +	{ 0, 11 },
> +	{ 2, 21 },
> +	{ 4, 32 },
> +	{ 6, 42 },
> +};
> +
> +static struct spacemit_pin_drv_strength spacemit_ds_3v3_tbl[8] = {
> +	{ 0,  7 },
> +	{ 2, 10 },
> +	{ 4, 13 },
> +	{ 6, 16 },
> +	{ 1, 19 },
> +	{ 3, 23 },
> +	{ 5, 26 },
> +	{ 7, 29 },
> +};
> +
> +static inline u8 spacemit_get_ds_value(struct spacemit_pin_drv_strength *tbl,
> +				       u32 num, u32 mA)
> +{
> +	int i;
> +
> +	for (i = 0; i < num; i++)
> +		if (mA <= tbl[i].mA)
> +			return tbl[i].val;
> +
> +	return tbl[num - 1].val;
> +}
> +
> +static inline u8 spacemit_get_driver_strength(enum spacemit_pin_io_type type,
> +					      u32 mA)
> +{
> +	switch (type) {
> +	case IO_TYPE_1V8:
> +		return spacemit_get_ds_value(spacemit_ds_1v8_tbl,
> +					     ARRAY_SIZE(spacemit_ds_1v8_tbl),
> +					     mA);
> +	case IO_TYPE_3V3:
> +		return spacemit_get_ds_value(spacemit_ds_3v3_tbl,
> +					     ARRAY_SIZE(spacemit_ds_3v3_tbl),
> +					     mA);
> +	default:
> +		return 0;
> +	}
> +}
> +static int spacemit_pctrl_check_power(struct pinctrl_dev *pctldev,
> +				      struct device_node *dn,
> +				      struct spacemit_pin_mux_config *pinmuxs,
> +				      int num_pins, const char *grpname)
> +{
> +	struct spacemit_pinctrl *pctrl = pinctrl_dev_get_drvdata(pctldev);
> +	struct device *dev = pctrl->dev;
> +	enum spacemit_pin_io_type type;
> +	u32 power = 0, i;
> +
> +	of_property_read_u32(dn, "power-source", &power);
> +
> +	for (i = 0; i < num_pins; i++) {
> +		type = spacemit_to_pin_io_type(pinmuxs[i].pin);
> +
> +		if (type != IO_TYPE_EXTERNAL)
> +			continue;
> +
> +		switch (power) {
> +		case PIN_POWER_STATE_1V8:
> +		case PIN_POWER_STATE_3V3:
> +			break;
> +		default:
> +			dev_err(dev, "group %s has unsupported power\n",
> +				grpname);
> +			return -ENOTSUPP;
> +		}
> +	}
> +
> +	return 0;
> +}
> +
> +static int spacemit_pctrl_dt_node_to_map(struct pinctrl_dev *pctldev,
> +					 struct device_node *np,
> +					 struct pinctrl_map **maps,
> +					 unsigned int *num_maps)
> +{
> +	struct spacemit_pinctrl *pctrl = pinctrl_dev_get_drvdata(pctldev);
> +	struct device *dev = pctrl->dev;
> +	struct device_node *child;
> +	struct pinctrl_map *map;
> +	const char **grpnames;
> +	const char *grpname;
> +	int ngroups = 0;
> +	int nmaps = 0;
> +	int ret;
> +
> +	for_each_available_child_of_node(np, child)
> +		ngroups += 1;
> +
> +	grpnames = devm_kcalloc(dev, ngroups, sizeof(*grpnames), GFP_KERNEL);
> +	if (!grpnames)
> +		return -ENOMEM;
> +
> +	map = devm_kcalloc(dev, ngroups * 2, sizeof(*map), GFP_KERNEL);
> +	if (!map)
> +		return -ENOMEM;
> +
> +	ngroups = 0;
> +	mutex_lock(&pctrl->mutex);
> +	for_each_available_child_of_node(np, child) {
> +		int npins = of_property_count_u32_elems(child, "pinmux");
> +		unsigned int *pins;
> +		struct spacemit_pin_mux_config *pinmuxs;
> +		u32 config;
> +		int i;
> +
> +		if (npins < 1) {
> +			dev_err(dev, "invalid pinctrl group %pOFn.%pOFn\n",
> +				np, child);
> +			ret = -EINVAL;
> +			goto dt_failed;
> +		}
> +
> +		grpname = devm_kasprintf(dev, GFP_KERNEL, "%pOFn.%pOFn",
> +					 np, child);
> +		if (!grpname) {
> +			ret = -ENOMEM;
> +			goto dt_failed;
> +		}
> +
> +		grpnames[ngroups++] = grpname;
> +
> +		pins = devm_kcalloc(dev, npins, sizeof(*pins), GFP_KERNEL);
> +		if (!pins) {
> +			ret = -ENOMEM;
> +			goto dt_failed;
> +		}
> +
> +		pinmuxs = devm_kcalloc(dev, npins, sizeof(*pinmuxs), GFP_KERNEL);
> +		if (!pinmuxs) {
> +			ret = -ENOMEM;
> +			goto dt_failed;
> +		}
> +
> +		for (i = 0; i < npins; i++) {
> +			ret = of_property_read_u32_index(child, "pinmux",
> +							 i, &config);
> +
> +			if (ret)
> +				goto dt_failed;
> +
> +			pins[i] = spacemit_dt_get_pin(config);
> +			pinmuxs[i].config = config;
> +			pinmuxs[i].pin = spacemit_get_pin(pctrl, pins[i]);
> +
> +			if (!pinmuxs[i].pin) {
> +				dev_err(dev, "failed to get pin %d\n", pins[i]);
> +				ret = -ENODEV;
> +				goto dt_failed;
> +			}
> +		}
> +
> +		ret = spacemit_pctrl_check_power(pctldev, child, pinmuxs,
> +						 npins, grpname);
> +		if (ret < 0)
> +			goto dt_failed;
> +
> +		map[nmaps].type = PIN_MAP_TYPE_MUX_GROUP;
> +		map[nmaps].data.mux.function = np->name;
> +		map[nmaps].data.mux.group = grpname;
> +		nmaps += 1;
> +
> +		ret = pinctrl_generic_add_group(pctldev, grpname,
> +						pins, npins, pinmuxs);
> +		if (ret < 0) {
> +			dev_err(dev, "failed to add group %s: %d\n", grpname, ret);
> +			goto dt_failed;
> +		}
> +
> +		ret = pinconf_generic_parse_dt_config(child, pctldev,
> +						      &map[nmaps].data.configs.configs,
> +						      &map[nmaps].data.configs.num_configs);
> +		if (ret) {
> +			dev_err(dev, "failed to parse pin config of group %s: %d\n",
> +				grpname, ret);
> +			goto dt_failed;
> +		}
> +
> +		if (map[nmaps].data.configs.num_configs == 0)
> +			continue;
> +
> +		map[nmaps].type = PIN_MAP_TYPE_CONFIGS_GROUP;
> +		map[nmaps].data.configs.group_or_pin = grpname;
> +		nmaps += 1;
> +	}
> +
> +	ret = pinmux_generic_add_function(pctldev, np->name,
> +					  grpnames, ngroups, NULL);
> +	if (ret < 0) {
> +		dev_err(dev, "error adding function %s: %d\n", np->name, ret);
> +		goto function_failed;
> +	}
> +
> +	*maps = map;
> +	*num_maps = nmaps;
> +	mutex_unlock(&pctrl->mutex);
> +
> +	return 0;
> +
> +dt_failed:
> +	of_node_put(child);
> +function_failed:
> +	pinctrl_utils_free_map(pctldev, map, nmaps);
> +	mutex_unlock(&pctrl->mutex);
> +	return ret;
> +}
> +
> +static const struct pinctrl_ops spacemit_pctrl_ops = {
> +	.get_groups_count	= pinctrl_generic_get_group_count,
> +	.get_group_name		= pinctrl_generic_get_group_name,
> +	.get_group_pins		= pinctrl_generic_get_group_pins,
> +	.pin_dbg_show		= spacemit_pctrl_dbg_show,
> +	.dt_node_to_map		= spacemit_pctrl_dt_node_to_map,
> +	.dt_free_map		= pinctrl_utils_free_map,
> +};
> +
> +static int spacemit_pmx_set_mux(struct pinctrl_dev *pctldev,
> +			      unsigned int fsel, unsigned int gsel)
> +{
> +	struct spacemit_pinctrl *pctrl = pinctrl_dev_get_drvdata(pctldev);
> +	const struct group_desc *group;
> +	const struct spacemit_pin_mux_config *configs;
> +	unsigned int i, mux;
> +	void __iomem *reg;
> +
> +	group = pinctrl_generic_get_group(pctldev, gsel);
> +	if (!group)
> +		return -EINVAL;
> +
> +	configs = group->data;
> +
> +	for (i = 0; i < group->grp.npins; i++) {
> +		const struct spacemit_pin *spin = configs[i].pin;
> +		u32 value = configs[i].config;
> +		unsigned long flags;
> +
> +		reg = spacemit_pin_to_reg(pctrl, spin->pin);
> +		mux = spacemit_dt_get_pin_mux(value);
> +
> +		raw_spin_lock_irqsave(&pctrl->lock, flags);
> +		value = readl_relaxed(reg) & ~PAD_MUX;
> +		writel_relaxed(mux | value, reg);
> +		raw_spin_unlock_irqrestore(&pctrl->lock, flags);
> +	}
> +
> +	return 0;
> +}
> +
> +static int spacemit_request_gpio(struct pinctrl_dev *pctldev,
> +				 struct pinctrl_gpio_range *range,
> +				 unsigned int pin)
> +{
> +	struct spacemit_pinctrl *pctrl = pinctrl_dev_get_drvdata(pctldev);
> +	const struct spacemit_pin *spin = spacemit_get_pin(pctrl, pin);
> +	void __iomem *reg;
> +
> +	reg = spacemit_pin_to_reg(pctrl, pin);
> +	writel(spin->gpiofunc, reg);
> +
> +	return 0;
> +}
> +
> +static const struct pinmux_ops spacemit_pmx_ops = {
> +	.get_functions_count	= pinmux_generic_get_function_count,
> +	.get_function_name	= pinmux_generic_get_function_name,
> +	.get_function_groups	= pinmux_generic_get_function_groups,
> +	.set_mux		= spacemit_pmx_set_mux,
> +	.gpio_request_enable	= spacemit_request_gpio,
> +	.strict			= true,
> +};
> +

> +static int spacemit_pinconf_get(struct pinctrl_dev *pctldev,
> +				unsigned int pin, unsigned long *config)
> +{
> +	struct spacemit_pinctrl *pctrl = pinctrl_dev_get_drvdata(pctldev);
> +	int param = pinconf_to_config_param(*config);
> +	u32 value, arg;
> +
> +	if (!pin)
> +		return -EINVAL;
> +
> +	value = readl(spacemit_pin_to_reg(pctrl, pin));
> +
> +	switch (param) {
> +	case PIN_CONFIG_BIAS_DISABLE:
> +		arg = !FIELD_GET(PAD_PULL_EN, value);
> +		break;
> +	case PIN_CONFIG_BIAS_PULL_DOWN:
> +		arg = FIELD_GET(PAD_PULLDOWN, value);
> +		break;
> +	case PIN_CONFIG_BIAS_PULL_UP:
> +		arg = FIELD_GET(PAD_PULLUP, value);
> +		break;
> +	case PIN_CONFIG_DRIVE_STRENGTH:
> +		arg = FIELD_GET(PAD_DRIVE, value);
> +		break;
> +	case PIN_CONFIG_INPUT_SCHMITT:
> +		arg = FIELD_GET(PAD_SCHMITT, value);
> +		break;
> +	case PIN_CONFIG_SLEW_RATE:
> +		arg = FIELD_GET(PAD_SLEW_RATE, value);
> +		break;
> +	default:
> +		return -EINVAL;
> +	}
> +
> +	*config = pinconf_to_config_packed(param, arg);
> +
> +	return 0;
> +}

return the value follows the config requirement, not the register value.

> +
> +#define ENABLE_DRV_STRENGTH	BIT(1)
> +#define ENABLE_SLEW_RATE	BIT(2)
> +static int spacemit_pinconf_generate_config(const struct spacemit_pin *spin,
> +					    unsigned long *configs,
> +					    unsigned int num_configs,
> +					    u32 *value)
> +{
> +	enum spacemit_pin_io_type type;
> +	int i, param;
> +	u32 v = 0, voltage = 0, arg, val;
> +	u32 flag = 0, drv_strength, slew_rate;
> +
> +	if (!spin)
> +		return -EINVAL;
> +
> +	for (i = 0; i < num_configs; i++) {
> +		param = pinconf_to_config_param(configs[i]);
> +		arg = pinconf_to_config_argument(configs[i]);
> +
> +		switch (param) {
> +		case PIN_CONFIG_BIAS_DISABLE:
> +			v &= ~(PAD_PULL_EN | PAD_PULLDOWN | PAD_PULLUP);
> +			v &= ~PAD_STRONG_PULL;
> +			break;
> +		case PIN_CONFIG_BIAS_PULL_DOWN:
> +			v &= ~(PAD_PULLUP | PAD_STRONG_PULL);
> +			v |= (PAD_PULL_EN | PAD_PULLDOWN);
> +			break;
> +		case PIN_CONFIG_BIAS_PULL_UP:
> +			v &= ~PAD_PULLDOWN;
> +			v |= (PAD_PULL_EN | PAD_PULLUP);
> +
> +			if (arg == 1)
> +				v |= PAD_STRONG_PULL;
> +			break;
> +		case PIN_CONFIG_DRIVE_STRENGTH:
> +			flag |= ENABLE_DRV_STRENGTH;
> +			drv_strength = arg;
> +			break;
> +		case PIN_CONFIG_INPUT_SCHMITT:
> +			v &= ~PAD_SCHMITT;
> +			v |= FIELD_PREP(PAD_SCHMITT, arg);
> +			break;
> +		case PIN_CONFIG_POWER_SOURCE:
> +			voltage = arg;
> +			break;
> +		case PIN_CONFIG_SLEW_RATE:
> +			if (arg) {
> +				flag |= ENABLE_SLEW_RATE;
> +				v |= PAD_SLEW_RATE_EN;
> +				slew_rate = arg;
> +			} else {
> +				v &= ~PAD_SLEW_RATE_EN;
> +			}
> +			break;
> +		default:
> +			return -EINVAL;
> +		}
> +	}
> +
> +	if (flag & ENABLE_DRV_STRENGTH) {
> +		type = spacemit_to_pin_io_type(spin);
> +
> +		/* fix external io type */
> +		if (type == IO_TYPE_EXTERNAL) {
> +			switch (voltage) {
> +			case 1800:
> +				type = IO_TYPE_1V8;
> +				break;
> +			case 3300:
> +				type = IO_TYPE_3V3;
> +				break;
> +			default:
> +				return -EINVAL;
> +			}
> +		}
> +
> +		val = spacemit_get_driver_strength(type, drv_strength);
> +
> +		v &= ~PAD_DRIVE;
> +		v |= FIELD_PREP(PAD_DRIVE, val);
> +	}
> +
> +	if (flag & ENABLE_SLEW_RATE) {
> +		/* check, driver strength & slew rate */
> +		if (flag & ENABLE_DRV_STRENGTH) {
> +			val = FIELD_GET(PAD_SLEW_RATE, v) + 2;
> +			if (slew_rate > 1 && slew_rate != val) {
> +				pr_err("slew rate conflict with drive strength\n");
> +				return -EINVAL;
> +			}
> +		} else {
> +			v &= ~PAD_SLEW_RATE;
> +			slew_rate = slew_rate > 1 ? (slew_rate - 2) : 0;
> +			v |= FIELD_PREP(PAD_SLEW_RATE, slew_rate);
> +		}
> +	}
> +
> +	*value = v;
> +
> +	return 0;
> +}
> +
> +static int spacemit_pin_set_config(struct spacemit_pinctrl *pctrl,
> +				 unsigned int pin,
> +				 u32 value)
> +{
> +	const struct spacemit_pin *spin = spacemit_get_pin(pctrl, pin);
> +	void __iomem *reg;
> +	unsigned long flags;
> +	unsigned int mux;
> +
> +	if (!pin)
> +		return -EINVAL;
> +
> +	reg = spacemit_pin_to_reg(pctrl, spin->pin);
> +
> +	raw_spin_lock_irqsave(&pctrl->lock, flags);
> +	mux = readl_relaxed(reg) & PAD_MUX;
> +	writel_relaxed(mux | value, reg);
> +	raw_spin_unlock_irqrestore(&pctrl->lock, flags);
> +
> +	return 0;
> +}
> +
> +static int spacemit_pinconf_set(struct pinctrl_dev *pctldev,
> +				unsigned int pin, unsigned long *configs,
> +				unsigned int num_configs)
> +{
> +	struct spacemit_pinctrl *pctrl = pinctrl_dev_get_drvdata(pctldev);
> +	const struct spacemit_pin *spin = spacemit_get_pin(pctrl, pin);
> +	u32 value;
> +
> +	if (spacemit_pinconf_generate_config(spin, configs, num_configs, &value))
> +		return -EINVAL;
> +
> +	return spacemit_pin_set_config(pctrl, pin, value);
> +}
> +
> +static int spacemit_pinconf_group_set(struct pinctrl_dev *pctldev,
> +				      unsigned int gsel,
> +				      unsigned long *configs,
> +				      unsigned int num_configs)
> +{
> +	struct spacemit_pinctrl *pctrl = pinctrl_dev_get_drvdata(pctldev);
> +	const struct spacemit_pin *spin;
> +	const struct group_desc *group;
> +	u32 value;
> +	int i;
> +
> +	group = pinctrl_generic_get_group(pctldev, gsel);
> +	if (!group)
> +		return -EINVAL;
> +
> +	spin = spacemit_get_pin(pctrl, group->grp.pins[0]);
> +	if (spacemit_pinconf_generate_config(spin, configs, num_configs, &value))
> +		return -EINVAL;
> +
> +	for (i = 0; i < group->grp.npins; i++)
> +		spacemit_pin_set_config(pctrl, group->grp.pins[i], value);
> +
> +	return 0;
> +}
> +

> +static void spacemit_pinconf_dbg_show(struct pinctrl_dev *pctldev,
> +				      struct seq_file *seq, unsigned int pin)
> +{
> +	struct spacemit_pinctrl *pctrl = pinctrl_dev_get_drvdata(pctldev);
> +	const struct spacemit_pin *spin = spacemit_get_pin(pctrl, pin);
> +	enum spacemit_pin_io_type type = spacemit_to_pin_io_type(spin);
> +	void __iomem *reg;
> +	u32 value;
> +
> +	reg = spacemit_pin_to_reg(pctrl, pin);
> +	value = readl(reg);
> +	seq_printf(seq, ", io type (%d)", type);
> +	seq_printf(seq, ", strong pull (%ld)", FIELD_GET(PAD_STRONG_PULL, value));
> +	seq_printf(seq, ", register (0x%04x)\n", value);
> +}

drop, move the "io type" to the spacemit_pctrl_dbg_show.
"strong pull" should be handled if you use real value in
spacemit_pinconf_get.

> +
> +static const struct pinconf_ops spacemit_pinconf_ops = {
> +	.pin_config_get			= spacemit_pinconf_get,
> +	.pin_config_set			= spacemit_pinconf_set,
> +	.pin_config_group_set		= spacemit_pinconf_group_set,
> +	.pin_config_dbg_show		= spacemit_pinconf_dbg_show,
> +	.is_generic			= true,
> +};
> +
> +static int spacemit_pinctrl_probe(struct platform_device *pdev)
> +{
> +	struct device *dev = &pdev->dev;
> +	struct spacemit_pinctrl *pctrl;
> +	const struct spacemit_pinctrl_data *pctrl_data;
> +	int ret;
> +
> +	pctrl_data = device_get_match_data(dev);
> +	if (!pctrl_data)
> +		return -ENODEV;
> +
> +	if (pctrl_data->npins == 0)
> +		return dev_err_probe(dev, -EINVAL, "invalid pin data\n");
> +
> +	pctrl = devm_kzalloc(dev, sizeof(*pctrl), GFP_KERNEL);
> +	if (!pctrl)
> +		return -ENOMEM;
> +
> +	pctrl->regs = devm_platform_ioremap_resource(pdev, 0);
> +	if (IS_ERR(pctrl->regs))
> +		return PTR_ERR(pctrl->regs);
> +
> +	pctrl->pdesc.name = dev_name(dev);
> +	pctrl->pdesc.pins = pctrl_data->pins;
> +	pctrl->pdesc.npins = pctrl_data->npins;
> +	pctrl->pdesc.pctlops = &spacemit_pctrl_ops;
> +	pctrl->pdesc.pmxops = &spacemit_pmx_ops;
> +	pctrl->pdesc.confops = &spacemit_pinconf_ops;
> +	pctrl->pdesc.owner = THIS_MODULE;
> +
> +	pctrl->data = pctrl_data;
> +	pctrl->dev = dev;
> +	raw_spin_lock_init(&pctrl->lock);
> +	mutex_init(&pctrl->mutex);
> +
> +	platform_set_drvdata(pdev, pctrl);
> +
> +	ret = devm_pinctrl_register_and_init(dev, &pctrl->pdesc,
> +					     pctrl, &pctrl->pctl_dev);
> +	if (ret)
> +		return dev_err_probe(dev, ret,
> +				     "fail to register pinctrl driver\n");
> +
> +	return pinctrl_enable(pctrl->pctl_dev);
> +}
> +
> +static const struct pinctrl_pin_desc k1_pin_desc[] = {
> +	PINCTRL_PIN(GPIO_00, "GPIO_00"),
> +	PINCTRL_PIN(GPIO_01, "GPIO_01"),
> +	PINCTRL_PIN(GPIO_02, "GPIO_02"),
> +	PINCTRL_PIN(GPIO_03, "GPIO_03"),
> +	PINCTRL_PIN(GPIO_04, "GPIO_04"),
> +	PINCTRL_PIN(GPIO_05, "GPIO_05"),
> +	PINCTRL_PIN(GPIO_06, "GPIO_06"),
> +	PINCTRL_PIN(GPIO_07, "GPIO_07"),
> +	PINCTRL_PIN(GPIO_08, "GPIO_08"),
> +	PINCTRL_PIN(GPIO_09, "GPIO_09"),
> +	PINCTRL_PIN(GPIO_10, "GPIO_10"),
> +	PINCTRL_PIN(GPIO_11, "GPIO_11"),
> +	PINCTRL_PIN(GPIO_12, "GPIO_12"),
> +	PINCTRL_PIN(GPIO_13, "GPIO_13"),
> +	PINCTRL_PIN(GPIO_14, "GPIO_14"),
> +	PINCTRL_PIN(GPIO_15, "GPIO_15"),
> +	PINCTRL_PIN(GPIO_16, "GPIO_16"),
> +	PINCTRL_PIN(GPIO_17, "GPIO_17"),
> +	PINCTRL_PIN(GPIO_18, "GPIO_18"),
> +	PINCTRL_PIN(GPIO_19, "GPIO_19"),
> +	PINCTRL_PIN(GPIO_20, "GPIO_20"),
> +	PINCTRL_PIN(GPIO_21, "GPIO_21"),
> +	PINCTRL_PIN(GPIO_22, "GPIO_22"),
> +	PINCTRL_PIN(GPIO_23, "GPIO_23"),
> +	PINCTRL_PIN(GPIO_24, "GPIO_24"),
> +	PINCTRL_PIN(GPIO_25, "GPIO_25"),
> +	PINCTRL_PIN(GPIO_26, "GPIO_26"),
> +	PINCTRL_PIN(GPIO_27, "GPIO_27"),
> +	PINCTRL_PIN(GPIO_28, "GPIO_28"),
> +	PINCTRL_PIN(GPIO_29, "GPIO_29"),
> +	PINCTRL_PIN(GPIO_30, "GPIO_30"),
> +	PINCTRL_PIN(GPIO_31, "GPIO_31"),
> +	PINCTRL_PIN(GPIO_32, "GPIO_32"),
> +	PINCTRL_PIN(GPIO_33, "GPIO_33"),
> +	PINCTRL_PIN(GPIO_34, "GPIO_34"),
> +	PINCTRL_PIN(GPIO_35, "GPIO_35"),
> +	PINCTRL_PIN(GPIO_36, "GPIO_36"),
> +	PINCTRL_PIN(GPIO_37, "GPIO_37"),
> +	PINCTRL_PIN(GPIO_38, "GPIO_38"),
> +	PINCTRL_PIN(GPIO_39, "GPIO_39"),
> +	PINCTRL_PIN(GPIO_40, "GPIO_40"),
> +	PINCTRL_PIN(GPIO_41, "GPIO_41"),
> +	PINCTRL_PIN(GPIO_42, "GPIO_42"),
> +	PINCTRL_PIN(GPIO_43, "GPIO_43"),
> +	PINCTRL_PIN(GPIO_44, "GPIO_44"),
> +	PINCTRL_PIN(GPIO_45, "GPIO_45"),
> +	PINCTRL_PIN(GPIO_46, "GPIO_46"),
> +	PINCTRL_PIN(GPIO_47, "GPIO_47"),
> +	PINCTRL_PIN(GPIO_48, "GPIO_48"),
> +	PINCTRL_PIN(GPIO_49, "GPIO_49"),
> +	PINCTRL_PIN(GPIO_50, "GPIO_50"),
> +	PINCTRL_PIN(GPIO_51, "GPIO_51"),
> +	PINCTRL_PIN(GPIO_52, "GPIO_52"),
> +	PINCTRL_PIN(GPIO_53, "GPIO_53"),
> +	PINCTRL_PIN(GPIO_54, "GPIO_54"),
> +	PINCTRL_PIN(GPIO_55, "GPIO_55"),
> +	PINCTRL_PIN(GPIO_56, "GPIO_56"),
> +	PINCTRL_PIN(GPIO_57, "GPIO_57"),
> +	PINCTRL_PIN(GPIO_58, "GPIO_58"),
> +	PINCTRL_PIN(GPIO_59, "GPIO_59"),
> +	PINCTRL_PIN(GPIO_60, "GPIO_60"),
> +	PINCTRL_PIN(GPIO_61, "GPIO_61"),
> +	PINCTRL_PIN(GPIO_62, "GPIO_62"),
> +	PINCTRL_PIN(GPIO_63, "GPIO_63"),
> +	PINCTRL_PIN(GPIO_64, "GPIO_64"),
> +	PINCTRL_PIN(GPIO_65, "GPIO_65"),
> +	PINCTRL_PIN(GPIO_66, "GPIO_66"),
> +	PINCTRL_PIN(GPIO_67, "GPIO_67"),
> +	PINCTRL_PIN(GPIO_68, "GPIO_68"),
> +	PINCTRL_PIN(GPIO_69, "GPIO_69"),
> +	PINCTRL_PIN(GPIO_70, "GPIO_70/PRI_DTI"),
> +	PINCTRL_PIN(GPIO_71, "GPIO_71/PRI_TMS"),
> +	PINCTRL_PIN(GPIO_72, "GPIO_72/PRI_TCK"),
> +	PINCTRL_PIN(GPIO_73, "GPIO_73/PRI_TDO"),
> +	PINCTRL_PIN(GPIO_74, "GPIO_74"),
> +	PINCTRL_PIN(GPIO_75, "GPIO_75"),
> +	PINCTRL_PIN(GPIO_76, "GPIO_76"),
> +	PINCTRL_PIN(GPIO_77, "GPIO_77"),
> +	PINCTRL_PIN(GPIO_78, "GPIO_78"),
> +	PINCTRL_PIN(GPIO_79, "GPIO_79"),
> +	PINCTRL_PIN(GPIO_80, "GPIO_80"),
> +	PINCTRL_PIN(GPIO_81, "GPIO_81"),
> +	PINCTRL_PIN(GPIO_82, "GPIO_82"),
> +	PINCTRL_PIN(GPIO_83, "GPIO_83"),
> +	PINCTRL_PIN(GPIO_84, "GPIO_84"),
> +	PINCTRL_PIN(GPIO_85, "GPIO_85"),
> +	PINCTRL_PIN(GPIO_86, "GPIO_86"),
> +	PINCTRL_PIN(GPIO_87, "GPIO_87"),
> +	PINCTRL_PIN(GPIO_88, "GPIO_88"),
> +	PINCTRL_PIN(GPIO_89, "GPIO_89"),
> +	PINCTRL_PIN(GPIO_90, "GPIO_90"),
> +	PINCTRL_PIN(GPIO_91, "GPIO_91"),
> +	PINCTRL_PIN(GPIO_92, "GPIO_92"),
> +	PINCTRL_PIN(GPIO_93, "GPIO_93/PWR_SCL"),
> +	PINCTRL_PIN(GPIO_94, "GPIO_94/PWR_SDA"),
> +	PINCTRL_PIN(GPIO_95, "GPIO_95/VCX0_EN"),
> +	PINCTRL_PIN(GPIO_96, "GPIO_96/DVL0"),
> +	PINCTRL_PIN(GPIO_97, "GPIO_97/DVL1"),
> +	PINCTRL_PIN(GPIO_98,  "GPIO_98/QSPI_DAT3"),
> +	PINCTRL_PIN(GPIO_99,  "GPIO_99/QSPI_DAT2"),
> +	PINCTRL_PIN(GPIO_100, "GPIO_100/QSPI_DAT1"),
> +	PINCTRL_PIN(GPIO_101, "GPIO_101/QSPI_DAT0"),
> +	PINCTRL_PIN(GPIO_102, "GPIO_102/QSPI_CLK"),
> +	PINCTRL_PIN(GPIO_103, "GPIO_103/QSPI_CSI"),
> +	PINCTRL_PIN(GPIO_104, "GPIO_104/MMC1_DAT3"),
> +	PINCTRL_PIN(GPIO_105, "GPIO_105/MMC1_DAT2"),
> +	PINCTRL_PIN(GPIO_106, "GPIO_106/MMC1_DAT1"),
> +	PINCTRL_PIN(GPIO_107, "GPIO_107/MMC1_DAT0"),
> +	PINCTRL_PIN(GPIO_108, "GPIO_108/MMC1_CMD"),
> +	PINCTRL_PIN(GPIO_109, "GPIO_109/MMC1_CLK"),
> +	PINCTRL_PIN(GPIO_110, "GPIO_110"),
> +	PINCTRL_PIN(GPIO_111, "GPIO_111"),
> +	PINCTRL_PIN(GPIO_112, "GPIO_112"),
> +	PINCTRL_PIN(GPIO_113, "GPIO_113"),
> +	PINCTRL_PIN(GPIO_114, "GPIO_114"),
> +	PINCTRL_PIN(GPIO_115, "GPIO_115"),
> +	PINCTRL_PIN(GPIO_116, "GPIO_116"),
> +	PINCTRL_PIN(GPIO_117, "GPIO_117"),
> +	PINCTRL_PIN(GPIO_118, "GPIO_118"),
> +	PINCTRL_PIN(GPIO_119, "GPIO_119"),
> +	PINCTRL_PIN(GPIO_120, "GPIO_120"),
> +	PINCTRL_PIN(GPIO_121, "GPIO_121"),
> +	PINCTRL_PIN(GPIO_122, "GPIO_122"),
> +	PINCTRL_PIN(GPIO_123, "GPIO_123"),
> +	PINCTRL_PIN(GPIO_124, "GPIO_124"),
> +	PINCTRL_PIN(GPIO_125, "GPIO_125"),
> +	PINCTRL_PIN(GPIO_126, "GPIO_126"),
> +	PINCTRL_PIN(GPIO_127, "GPIO_127"),
> +};
> +
> +static const struct spacemit_pin k1_pin_data[ARRAY_SIZE(k1_pin_desc)] = {
> +	K1_FUNC_PIN(GPIO_00, 0, IO_TYPE_1V8),
> +	K1_FUNC_PIN(GPIO_01, 0, IO_TYPE_1V8),
> +	K1_FUNC_PIN(GPIO_02, 0, IO_TYPE_1V8),
> +	K1_FUNC_PIN(GPIO_03, 0, IO_TYPE_1V8),
> +	K1_FUNC_PIN(GPIO_04, 0, IO_TYPE_1V8),
> +	K1_FUNC_PIN(GPIO_05, 0, IO_TYPE_1V8),
> +	K1_FUNC_PIN(GPIO_06, 0, IO_TYPE_1V8),
> +	K1_FUNC_PIN(GPIO_07, 0, IO_TYPE_1V8),
> +	K1_FUNC_PIN(GPIO_08, 0, IO_TYPE_1V8),
> +	K1_FUNC_PIN(GPIO_09, 0, IO_TYPE_1V8),
> +	K1_FUNC_PIN(GPIO_10, 0, IO_TYPE_1V8),
> +	K1_FUNC_PIN(GPIO_11, 0, IO_TYPE_1V8),
> +	K1_FUNC_PIN(GPIO_12, 0, IO_TYPE_1V8),
> +	K1_FUNC_PIN(GPIO_13, 0, IO_TYPE_1V8),
> +	K1_FUNC_PIN(GPIO_14, 0, IO_TYPE_1V8),
> +	K1_FUNC_PIN(GPIO_15, 0, IO_TYPE_1V8),
> +	K1_FUNC_PIN(GPIO_16, 0, IO_TYPE_1V8),
> +	K1_FUNC_PIN(GPIO_17, 0, IO_TYPE_1V8),
> +	K1_FUNC_PIN(GPIO_18, 0, IO_TYPE_1V8),
> +	K1_FUNC_PIN(GPIO_19, 0, IO_TYPE_1V8),
> +	K1_FUNC_PIN(GPIO_20, 0, IO_TYPE_1V8),
> +	K1_FUNC_PIN(GPIO_21, 0, IO_TYPE_1V8),
> +	K1_FUNC_PIN(GPIO_22, 0, IO_TYPE_1V8),
> +	K1_FUNC_PIN(GPIO_23, 0, IO_TYPE_1V8),
> +	K1_FUNC_PIN(GPIO_24, 0, IO_TYPE_1V8),
> +	K1_FUNC_PIN(GPIO_25, 0, IO_TYPE_1V8),
> +	K1_FUNC_PIN(GPIO_26, 0, IO_TYPE_1V8),
> +	K1_FUNC_PIN(GPIO_27, 0, IO_TYPE_1V8),
> +	K1_FUNC_PIN(GPIO_28, 0, IO_TYPE_1V8),
> +	K1_FUNC_PIN(GPIO_29, 0, IO_TYPE_1V8),
> +	K1_FUNC_PIN(GPIO_30, 0, IO_TYPE_1V8),
> +	K1_FUNC_PIN(GPIO_31, 0, IO_TYPE_1V8),
> +	K1_FUNC_PIN(GPIO_32, 0, IO_TYPE_1V8),
> +	K1_FUNC_PIN(GPIO_33, 0, IO_TYPE_1V8),
> +	K1_FUNC_PIN(GPIO_34, 0, IO_TYPE_1V8),
> +	K1_FUNC_PIN(GPIO_35, 0, IO_TYPE_1V8),
> +	K1_FUNC_PIN(GPIO_36, 0, IO_TYPE_1V8),
> +	K1_FUNC_PIN(GPIO_37, 0, IO_TYPE_1V8),
> +	K1_FUNC_PIN(GPIO_38, 0, IO_TYPE_1V8),
> +	K1_FUNC_PIN(GPIO_39, 0, IO_TYPE_1V8),
> +	K1_FUNC_PIN(GPIO_40, 0, IO_TYPE_1V8),
> +	K1_FUNC_PIN(GPIO_41, 0, IO_TYPE_1V8),
> +	K1_FUNC_PIN(GPIO_42, 0, IO_TYPE_1V8),
> +	K1_FUNC_PIN(GPIO_43, 0, IO_TYPE_1V8),
> +	K1_FUNC_PIN(GPIO_44, 0, IO_TYPE_1V8),
> +	K1_FUNC_PIN(GPIO_45, 0, IO_TYPE_1V8),
> +	K1_FUNC_PIN(GPIO_46, 0, IO_TYPE_1V8),
> +	K1_FUNC_PIN(GPIO_47, 0, IO_TYPE_EXTERNAL),
> +	K1_FUNC_PIN(GPIO_48, 0, IO_TYPE_EXTERNAL),
> +	K1_FUNC_PIN(GPIO_49, 0, IO_TYPE_EXTERNAL),
> +	K1_FUNC_PIN(GPIO_50, 0, IO_TYPE_EXTERNAL),
> +	K1_FUNC_PIN(GPIO_51, 0, IO_TYPE_EXTERNAL),
> +	K1_FUNC_PIN(GPIO_52, 0, IO_TYPE_EXTERNAL),
> +	K1_FUNC_PIN(GPIO_53, 0, IO_TYPE_1V8),
> +	K1_FUNC_PIN(GPIO_54, 0, IO_TYPE_1V8),
> +	K1_FUNC_PIN(GPIO_55, 0, IO_TYPE_1V8),
> +	K1_FUNC_PIN(GPIO_56, 0, IO_TYPE_1V8),
> +	K1_FUNC_PIN(GPIO_57, 0, IO_TYPE_1V8),
> +	K1_FUNC_PIN(GPIO_58, 0, IO_TYPE_1V8),
> +	K1_FUNC_PIN(GPIO_59, 0, IO_TYPE_1V8),
> +	K1_FUNC_PIN(GPIO_60, 0, IO_TYPE_1V8),
> +	K1_FUNC_PIN(GPIO_61, 0, IO_TYPE_1V8),
> +	K1_FUNC_PIN(GPIO_62, 0, IO_TYPE_1V8),
> +	K1_FUNC_PIN(GPIO_63, 0, IO_TYPE_1V8),
> +	K1_FUNC_PIN(GPIO_64, 0, IO_TYPE_1V8),
> +	K1_FUNC_PIN(GPIO_65, 0, IO_TYPE_1V8),
> +	K1_FUNC_PIN(GPIO_66, 0, IO_TYPE_1V8),
> +	K1_FUNC_PIN(GPIO_67, 0, IO_TYPE_1V8),
> +	K1_FUNC_PIN(GPIO_68, 0, IO_TYPE_1V8),
> +	K1_FUNC_PIN(GPIO_69, 0, IO_TYPE_1V8),
> +	K1_FUNC_PIN(GPIO_70, 1, IO_TYPE_1V8),
> +	K1_FUNC_PIN(GPIO_71, 1, IO_TYPE_1V8),
> +	K1_FUNC_PIN(GPIO_72, 1, IO_TYPE_1V8),
> +	K1_FUNC_PIN(GPIO_73, 1, IO_TYPE_1V8),
> +	K1_FUNC_PIN(GPIO_74, 0, IO_TYPE_1V8),
> +	K1_FUNC_PIN(GPIO_75, 0, IO_TYPE_EXTERNAL),
> +	K1_FUNC_PIN(GPIO_76, 0, IO_TYPE_EXTERNAL),
> +	K1_FUNC_PIN(GPIO_77, 0, IO_TYPE_EXTERNAL),
> +	K1_FUNC_PIN(GPIO_78, 0, IO_TYPE_EXTERNAL),
> +	K1_FUNC_PIN(GPIO_79, 0, IO_TYPE_EXTERNAL),
> +	K1_FUNC_PIN(GPIO_80, 0, IO_TYPE_EXTERNAL),
> +	K1_FUNC_PIN(GPIO_81, 0, IO_TYPE_1V8),
> +	K1_FUNC_PIN(GPIO_82, 0, IO_TYPE_1V8),
> +	K1_FUNC_PIN(GPIO_83, 0, IO_TYPE_1V8),
> +	K1_FUNC_PIN(GPIO_84, 0, IO_TYPE_1V8),
> +	K1_FUNC_PIN(GPIO_85, 0, IO_TYPE_1V8),
> +	K1_FUNC_PIN(GPIO_86, 0, IO_TYPE_1V8),
> +	K1_FUNC_PIN(GPIO_87, 0, IO_TYPE_1V8),
> +	K1_FUNC_PIN(GPIO_88, 0, IO_TYPE_1V8),
> +	K1_FUNC_PIN(GPIO_89, 0, IO_TYPE_1V8),
> +	K1_FUNC_PIN(GPIO_90, 0, IO_TYPE_1V8),
> +	K1_FUNC_PIN(GPIO_91, 0, IO_TYPE_1V8),
> +	K1_FUNC_PIN(GPIO_92, 0, IO_TYPE_1V8),
> +	K1_FUNC_PIN(GPIO_93, 1, IO_TYPE_1V8),
> +	K1_FUNC_PIN(GPIO_94, 1, IO_TYPE_1V8),
> +	K1_FUNC_PIN(GPIO_95, 1, IO_TYPE_1V8),
> +	K1_FUNC_PIN(GPIO_96, 1, IO_TYPE_1V8),
> +	K1_FUNC_PIN(GPIO_97, 1, IO_TYPE_1V8),
> +	K1_FUNC_PIN(GPIO_98, 1, IO_TYPE_EXTERNAL),
> +	K1_FUNC_PIN(GPIO_99, 1, IO_TYPE_EXTERNAL),
> +	K1_FUNC_PIN(GPIO_100, 1, IO_TYPE_EXTERNAL),
> +	K1_FUNC_PIN(GPIO_101, 1, IO_TYPE_EXTERNAL),
> +	K1_FUNC_PIN(GPIO_102, 1, IO_TYPE_EXTERNAL),
> +	K1_FUNC_PIN(GPIO_103, 1, IO_TYPE_EXTERNAL),
> +	K1_FUNC_PIN(GPIO_104, 4, IO_TYPE_EXTERNAL),
> +	K1_FUNC_PIN(GPIO_105, 4, IO_TYPE_EXTERNAL),
> +	K1_FUNC_PIN(GPIO_106, 4, IO_TYPE_EXTERNAL),
> +	K1_FUNC_PIN(GPIO_107, 4, IO_TYPE_EXTERNAL),
> +	K1_FUNC_PIN(GPIO_108, 4, IO_TYPE_EXTERNAL),
> +	K1_FUNC_PIN(GPIO_109, 4, IO_TYPE_EXTERNAL),
> +	K1_FUNC_PIN(GPIO_110, 0, IO_TYPE_1V8),
> +	K1_FUNC_PIN(GPIO_111, 0, IO_TYPE_1V8),
> +	K1_FUNC_PIN(GPIO_112, 0, IO_TYPE_1V8),
> +	K1_FUNC_PIN(GPIO_113, 0, IO_TYPE_1V8),
> +	K1_FUNC_PIN(GPIO_114, 0, IO_TYPE_1V8),
> +	K1_FUNC_PIN(GPIO_115, 0, IO_TYPE_1V8),
> +	K1_FUNC_PIN(GPIO_116, 0, IO_TYPE_1V8),
> +	K1_FUNC_PIN(GPIO_117, 0, IO_TYPE_1V8),
> +	K1_FUNC_PIN(GPIO_118, 0, IO_TYPE_1V8),
> +	K1_FUNC_PIN(GPIO_119, 0, IO_TYPE_1V8),
> +	K1_FUNC_PIN(GPIO_120, 0, IO_TYPE_1V8),
> +	K1_FUNC_PIN(GPIO_121, 0, IO_TYPE_1V8),
> +	K1_FUNC_PIN(GPIO_122, 0, IO_TYPE_1V8),
> +	K1_FUNC_PIN(GPIO_123, 0, IO_TYPE_1V8),
> +	K1_FUNC_PIN(GPIO_124, 0, IO_TYPE_1V8),
> +	K1_FUNC_PIN(GPIO_125, 0, IO_TYPE_1V8),
> +	K1_FUNC_PIN(GPIO_126, 0, IO_TYPE_1V8),
> +	K1_FUNC_PIN(GPIO_127, 0, IO_TYPE_1V8),
> +};
> +
> +static const struct spacemit_pinctrl_data k1_pinctrl_data = {
> +	.pins = k1_pin_desc,
> +	.data = k1_pin_data,
> +	.npins = ARRAY_SIZE(k1_pin_desc),
> +};
> +
> +static const struct of_device_id k1_pinctrl_ids[] = {
> +	{ .compatible = "spacemit,k1-pinctrl", .data = &k1_pinctrl_data },
> +	{ /* sentinel */ }
> +};
> +MODULE_DEVICE_TABLE(of, k1_pinctrl_ids);
> +
> +static struct platform_driver k1_pinctrl_driver = {
> +	.probe	= spacemit_pinctrl_probe,
> +	.driver	= {
> +		.name			= "k1-pinctrl",
> +		.suppress_bind_attrs	= true,
> +		.of_match_table		= k1_pinctrl_ids,
> +	},
> +};
> +module_platform_driver(k1_pinctrl_driver);
> +
> +MODULE_AUTHOR("Yixun Lan <dlan@gentoo.org>");
> +MODULE_DESCRIPTION("Pinctrl driver for the SpacemiT K1 SoC");
> +MODULE_LICENSE("GPL");
> diff --git a/drivers/pinctrl/spacemit/pinctrl-k1.h b/drivers/pinctrl/spacemit/pinctrl-k1.h
> new file mode 100644
> index 0000000000000..fa98756cf7321
> --- /dev/null
> +++ b/drivers/pinctrl/spacemit/pinctrl-k1.h
> @@ -0,0 +1,180 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +/* Copyright (c) 2024 Yixun Lan <dlan@gentoo.org> */
> +
> +#ifndef _PINCTRL_SPACEMIT_K1_H
> +#define _PINCTRL_SPACEMIT_K1_H
> +
> +#include <linux/bits.h>
> +#include <linux/bitfield.h>
> +#include <linux/device.h>
> +#include <linux/mutex.h>
> +#include <linux/spinlock.h>
> +#include <linux/platform_device.h>
> +#include <linux/pinctrl/pinctrl.h>
> +#include <linux/pinctrl/pinconf.h>
> +
> +enum spacemit_pin_io_type {
> +	IO_TYPE_NONE = 0,
> +	IO_TYPE_1V8,
> +	IO_TYPE_3V3,
> +	IO_TYPE_EXTERNAL,
> +};
> +
> +#define PIN_POWER_STATE_1V8		1800
> +#define PIN_POWER_STATE_3V3		3300
> +
> +#define K1_PIN_IO_TYPE		GENMASK(2, 1)
> +
> +#define K1_PIN_CAP_IO_TYPE(type)				\
> +	FIELD_PREP_CONST(K1_PIN_IO_TYPE, type)
> +#define K1_PIN_GET_IO_TYPE(val)					\
> +	FIELD_GET(K1_PIN_IO_TYPE, val)
> +
> +#define K1_FUNC_PIN(_id, _gpiofunc, _io)			\
> +	{							\
> +		.pin		= (_id),			\
> +		.gpiofunc	= (_gpiofunc),			\
> +		.flags		= (K1_PIN_CAP_IO_TYPE(_io)),	\
> +	}
> +
> +/* pin offset */
> +#define PINID(x)	((x) + 1)
> +
> +#define GPIO_INVAL  0
> +#define GPIO_00     PINID(0)
> +#define GPIO_01     PINID(1)
> +#define GPIO_02     PINID(2)
> +#define GPIO_03     PINID(3)
> +#define GPIO_04     PINID(4)
> +#define GPIO_05     PINID(5)
> +#define GPIO_06     PINID(6)
> +#define GPIO_07     PINID(7)
> +#define GPIO_08     PINID(8)
> +#define GPIO_09     PINID(9)
> +#define GPIO_10     PINID(10)
> +#define GPIO_11     PINID(11)
> +#define GPIO_12     PINID(12)
> +#define GPIO_13     PINID(13)
> +#define GPIO_14     PINID(14)
> +#define GPIO_15     PINID(15)
> +#define GPIO_16     PINID(16)
> +#define GPIO_17     PINID(17)
> +#define GPIO_18     PINID(18)
> +#define GPIO_19     PINID(19)
> +#define GPIO_20     PINID(20)
> +#define GPIO_21     PINID(21)
> +#define GPIO_22     PINID(22)
> +#define GPIO_23     PINID(23)
> +#define GPIO_24     PINID(24)
> +#define GPIO_25     PINID(25)
> +#define GPIO_26     PINID(26)
> +#define GPIO_27     PINID(27)
> +#define GPIO_28     PINID(28)
> +#define GPIO_29     PINID(29)
> +#define GPIO_30     PINID(30)
> +#define GPIO_31     PINID(31)
> +
> +#define GPIO_32     PINID(32)
> +#define GPIO_33     PINID(33)
> +#define GPIO_34     PINID(34)
> +#define GPIO_35     PINID(35)
> +#define GPIO_36     PINID(36)
> +#define GPIO_37     PINID(37)
> +#define GPIO_38     PINID(38)
> +#define GPIO_39     PINID(39)
> +#define GPIO_40     PINID(40)
> +#define GPIO_41     PINID(41)
> +#define GPIO_42     PINID(42)
> +#define GPIO_43     PINID(43)
> +#define GPIO_44     PINID(44)
> +#define GPIO_45     PINID(45)
> +#define GPIO_46     PINID(46)
> +#define GPIO_47     PINID(47)
> +#define GPIO_48     PINID(48)
> +#define GPIO_49     PINID(49)
> +#define GPIO_50     PINID(50)
> +#define GPIO_51     PINID(51)
> +#define GPIO_52     PINID(52)
> +#define GPIO_53     PINID(53)
> +#define GPIO_54     PINID(54)
> +#define GPIO_55     PINID(55)
> +#define GPIO_56     PINID(56)
> +#define GPIO_57     PINID(57)
> +#define GPIO_58     PINID(58)
> +#define GPIO_59     PINID(59)
> +#define GPIO_60     PINID(60)
> +#define GPIO_61     PINID(61)
> +#define GPIO_62     PINID(62)
> +#define GPIO_63     PINID(63)
> +
> +#define GPIO_64     PINID(64)
> +#define GPIO_65     PINID(65)
> +#define GPIO_66     PINID(66)
> +#define GPIO_67     PINID(67)
> +#define GPIO_68     PINID(68)
> +#define GPIO_69     PINID(69)
> +#define GPIO_70     PINID(70)
> +#define GPIO_71     PINID(71)
> +#define GPIO_72     PINID(72)
> +#define GPIO_73     PINID(73)
> +#define GPIO_74     PINID(74)
> +#define GPIO_75     PINID(75)
> +#define GPIO_76     PINID(76)
> +#define GPIO_77     PINID(77)
> +#define GPIO_78     PINID(78)
> +#define GPIO_79     PINID(79)
> +#define GPIO_80     PINID(80)
> +#define GPIO_81     PINID(81)
> +#define GPIO_82     PINID(82)
> +#define GPIO_83     PINID(83)
> +#define GPIO_84     PINID(84)
> +#define GPIO_85     PINID(85)
> +
> +#define GPIO_101    PINID(89)
> +#define GPIO_100    PINID(90)
> +#define GPIO_99     PINID(91)
> +#define GPIO_98     PINID(92)
> +#define GPIO_103    PINID(93)
> +#define GPIO_102    PINID(94)
> +
> +#define GPIO_104    PINID(109)
> +#define GPIO_105    PINID(110)
> +#define GPIO_106    PINID(111)
> +#define GPIO_107    PINID(112)
> +#define GPIO_108    PINID(113)
> +#define GPIO_109    PINID(114)
> +#define GPIO_110    PINID(115)
> +
> +#define GPIO_93     PINID(116)
> +#define GPIO_94     PINID(117)
> +#define GPIO_95     PINID(118)
> +#define GPIO_96     PINID(119)
> +#define GPIO_97     PINID(120)
> +
> +#define GPIO_86     PINID(122)
> +#define GPIO_87     PINID(123)
> +#define GPIO_88     PINID(124)
> +#define GPIO_89     PINID(125)
> +#define GPIO_90     PINID(126)
> +#define GPIO_91     PINID(127)
> +#define GPIO_92     PINID(128)
> +
> +#define GPIO_111    PINID(130)
> +#define GPIO_112    PINID(131)
> +#define GPIO_113    PINID(132)
> +#define GPIO_114    PINID(133)
> +#define GPIO_115    PINID(134)
> +#define GPIO_116    PINID(135)
> +#define GPIO_117    PINID(136)
> +#define GPIO_118    PINID(137)
> +#define GPIO_119    PINID(138)
> +#define GPIO_120    PINID(139)
> +#define GPIO_121    PINID(140)
> +#define GPIO_122    PINID(141)
> +#define GPIO_123    PINID(142)
> +#define GPIO_124    PINID(143)
> +#define GPIO_125    PINID(144)
> +#define GPIO_126    PINID(145)
> +#define GPIO_127    PINID(146)
> +
> +#endif /* _PINCTRL_SPACEMIT_K1_H */
> 
> -- 
> 2.45.2
>
Yixun Lan Aug. 30, 2024, 8:09 a.m. UTC | #2
Hi Inochi:

On 09:46 Fri 30 Aug     , Inochi Amaoto wrote:
> On Wed, Aug 28, 2024 at 11:30:24AM GMT, Yixun Lan wrote:
> > SpacemiT's K1 SoC has a pinctrl controller which use single register
> > to describe all functions, which include bias pull up/down(strong pull),
> > drive strength, schmitter trigger, slew rate, mux mode.
> > 
> > Signed-off-by: Yixun Lan <dlan@gentoo.org>
> > ---
> >  drivers/pinctrl/Kconfig               |   1 +
> >  drivers/pinctrl/Makefile              |   1 +
> >  drivers/pinctrl/spacemit/Kconfig      |  17 +
> >  drivers/pinctrl/spacemit/Makefile     |   3 +
> >  drivers/pinctrl/spacemit/pinctrl-k1.c | 978 ++++++++++++++++++++++++++++++++++
> >  drivers/pinctrl/spacemit/pinctrl-k1.h | 180 +++++++
> >  6 files changed, 1180 insertions(+)
> > 
.. snip
> > +
> > +obj-$(CONFIG_PINCTRL_SPACEMIT_K1)	+= pinctrl-k1.o
> > diff --git a/drivers/pinctrl/spacemit/pinctrl-k1.c b/drivers/pinctrl/spacemit/pinctrl-k1.c
> > new file mode 100644
> > index 0000000000000..9faac5a629c38
> > --- /dev/null
> > +++ b/drivers/pinctrl/spacemit/pinctrl-k1.c
> > @@ -0,0 +1,978 @@
> > +// SPDX-License-Identifier: GPL-2.0
> > +/* Copyright (c) 2024 Yixun Lan <dlan@gentoo.org> */
> > +
> > +
.. snip
> > +static int spacemit_request_gpio(struct pinctrl_dev *pctldev,
> > +				 struct pinctrl_gpio_range *range,
> > +				 unsigned int pin)
> > +{
> > +	struct spacemit_pinctrl *pctrl = pinctrl_dev_get_drvdata(pctldev);
> > +	const struct spacemit_pin *spin = spacemit_get_pin(pctrl, pin);
> > +	void __iomem *reg;
> > +
> > +	reg = spacemit_pin_to_reg(pctrl, pin);
> > +	writel(spin->gpiofunc, reg);
> > +
> > +	return 0;
> > +}
> > +
> > +static const struct pinmux_ops spacemit_pmx_ops = {
> > +	.get_functions_count	= pinmux_generic_get_function_count,
> > +	.get_function_name	= pinmux_generic_get_function_name,
> > +	.get_function_groups	= pinmux_generic_get_function_groups,
> > +	.set_mux		= spacemit_pmx_set_mux,
> > +	.gpio_request_enable	= spacemit_request_gpio,
> > +	.strict			= true,
> > +};
> > +
> 
> > +static int spacemit_pinconf_get(struct pinctrl_dev *pctldev,
> > +				unsigned int pin, unsigned long *config)
> > +{
> > +	struct spacemit_pinctrl *pctrl = pinctrl_dev_get_drvdata(pctldev);
> > +	int param = pinconf_to_config_param(*config);
> > +	u32 value, arg;
> > +
> > +	if (!pin)
> > +		return -EINVAL;
> > +
> > +	value = readl(spacemit_pin_to_reg(pctrl, pin));
> > +
> > +	switch (param) {
> > +	case PIN_CONFIG_BIAS_DISABLE:
> > +		arg = !FIELD_GET(PAD_PULL_EN, value);
> > +		break;
> > +	case PIN_CONFIG_BIAS_PULL_DOWN:
> > +		arg = FIELD_GET(PAD_PULLDOWN, value);
> > +		break;
> > +	case PIN_CONFIG_BIAS_PULL_UP:
> > +		arg = FIELD_GET(PAD_PULLUP, value);
> > +		break;
> > +	case PIN_CONFIG_DRIVE_STRENGTH:
> > +		arg = FIELD_GET(PAD_DRIVE, value);
> > +		break;
> > +	case PIN_CONFIG_INPUT_SCHMITT:
> > +		arg = FIELD_GET(PAD_SCHMITT, value);
> > +		break;
> > +	case PIN_CONFIG_SLEW_RATE:
> > +		arg = FIELD_GET(PAD_SLEW_RATE, value);
> > +		break;
> > +	default:
> > +		return -EINVAL;
> > +	}
> > +
> > +	*config = pinconf_to_config_packed(param, arg);
> > +
> > +	return 0;
> > +}
> 
> return the value follows the config requirement, not the register value.
> 
ok, I rework this part

> > +
> > +#define ENABLE_DRV_STRENGTH	BIT(1)
> > +#define ENABLE_SLEW_RATE	BIT(2)
> > +static int spacemit_pinconf_generate_config(const struct spacemit_pin *spin,
> > +					    unsigned long *configs,
> > +					    unsigned int num_configs,
> > +					    u32 *value)
> > +{
> > +	enum spacemit_pin_io_type type;
> > +	int i, param;
> > +	u32 v = 0, voltage = 0, arg, val;
> > +	u32 flag = 0, drv_strength, slew_rate;
> > +
> > +	if (!spin)
> > +		return -EINVAL;
> > +
> > +	for (i = 0; i < num_configs; i++) {
> > +		param = pinconf_to_config_param(configs[i]);
> > +		arg = pinconf_to_config_argument(configs[i]);
> > +
> > +		switch (param) {
> > +		case PIN_CONFIG_BIAS_DISABLE:
> > +			v &= ~(PAD_PULL_EN | PAD_PULLDOWN | PAD_PULLUP);
> > +			v &= ~PAD_STRONG_PULL;
> > +			break;
> > +		case PIN_CONFIG_BIAS_PULL_DOWN:
> > +			v &= ~(PAD_PULLUP | PAD_STRONG_PULL);
> > +			v |= (PAD_PULL_EN | PAD_PULLDOWN);
> > +			break;
> > +		case PIN_CONFIG_BIAS_PULL_UP:
> > +			v &= ~PAD_PULLDOWN;
> > +			v |= (PAD_PULL_EN | PAD_PULLUP);
> > +
> > +			if (arg == 1)
> > +				v |= PAD_STRONG_PULL;
> > +			break;
> > +		case PIN_CONFIG_DRIVE_STRENGTH:
> > +			flag |= ENABLE_DRV_STRENGTH;
> > +			drv_strength = arg;
> > +			break;
> > +		case PIN_CONFIG_INPUT_SCHMITT:
> > +			v &= ~PAD_SCHMITT;
> > +			v |= FIELD_PREP(PAD_SCHMITT, arg);
> > +			break;
> > +		case PIN_CONFIG_POWER_SOURCE:
> > +			voltage = arg;
> > +			break;
> > +		case PIN_CONFIG_SLEW_RATE:
> > +			if (arg) {
> > +				flag |= ENABLE_SLEW_RATE;
> > +				v |= PAD_SLEW_RATE_EN;
> > +				slew_rate = arg;
> > +			} else {
> > +				v &= ~PAD_SLEW_RATE_EN;
> > +			}
> > +			break;
> > +		default:
> > +			return -EINVAL;
> > +		}
> > +	}
> > +
> > +	if (flag & ENABLE_DRV_STRENGTH) {
> > +		type = spacemit_to_pin_io_type(spin);
> > +
> > +		/* fix external io type */
> > +		if (type == IO_TYPE_EXTERNAL) {
> > +			switch (voltage) {
> > +			case 1800:
> > +				type = IO_TYPE_1V8;
> > +				break;
> > +			case 3300:
> > +				type = IO_TYPE_3V3;
> > +				break;
> > +			default:
> > +				return -EINVAL;
> > +			}
> > +		}
> > +
> > +		val = spacemit_get_driver_strength(type, drv_strength);
> > +
> > +		v &= ~PAD_DRIVE;
> > +		v |= FIELD_PREP(PAD_DRIVE, val);
> > +	}
> > +
> > +	if (flag & ENABLE_SLEW_RATE) {
> > +		/* check, driver strength & slew rate */
> > +		if (flag & ENABLE_DRV_STRENGTH) {
> > +			val = FIELD_GET(PAD_SLEW_RATE, v) + 2;
> > +			if (slew_rate > 1 && slew_rate != val) {
> > +				pr_err("slew rate conflict with drive strength\n");
> > +				return -EINVAL;
> > +			}
> > +		} else {
> > +			v &= ~PAD_SLEW_RATE;
> > +			slew_rate = slew_rate > 1 ? (slew_rate - 2) : 0;
> > +			v |= FIELD_PREP(PAD_SLEW_RATE, slew_rate);
> > +		}
> > +	}
> > +
> > +	*value = v;
> > +
> > +	return 0;
> > +}
> > +
> > +static int spacemit_pin_set_config(struct spacemit_pinctrl *pctrl,
> > +				 unsigned int pin,
> > +				 u32 value)
> > +{
> > +	const struct spacemit_pin *spin = spacemit_get_pin(pctrl, pin);
> > +	void __iomem *reg;
> > +	unsigned long flags;
> > +	unsigned int mux;
> > +
> > +	if (!pin)
> > +		return -EINVAL;
> > +
> > +	reg = spacemit_pin_to_reg(pctrl, spin->pin);
> > +
> > +	raw_spin_lock_irqsave(&pctrl->lock, flags);
> > +	mux = readl_relaxed(reg) & PAD_MUX;
> > +	writel_relaxed(mux | value, reg);
> > +	raw_spin_unlock_irqrestore(&pctrl->lock, flags);
> > +
> > +	return 0;
> > +}
> > +
> > +static int spacemit_pinconf_set(struct pinctrl_dev *pctldev,
> > +				unsigned int pin, unsigned long *configs,
> > +				unsigned int num_configs)
> > +{
> > +	struct spacemit_pinctrl *pctrl = pinctrl_dev_get_drvdata(pctldev);
> > +	const struct spacemit_pin *spin = spacemit_get_pin(pctrl, pin);
> > +	u32 value;
> > +
> > +	if (spacemit_pinconf_generate_config(spin, configs, num_configs, &value))
> > +		return -EINVAL;
> > +
> > +	return spacemit_pin_set_config(pctrl, pin, value);
> > +}
> > +
> > +static int spacemit_pinconf_group_set(struct pinctrl_dev *pctldev,
> > +				      unsigned int gsel,
> > +				      unsigned long *configs,
> > +				      unsigned int num_configs)
> > +{
> > +	struct spacemit_pinctrl *pctrl = pinctrl_dev_get_drvdata(pctldev);
> > +	const struct spacemit_pin *spin;
> > +	const struct group_desc *group;
> > +	u32 value;
> > +	int i;
> > +
> > +	group = pinctrl_generic_get_group(pctldev, gsel);
> > +	if (!group)
> > +		return -EINVAL;
> > +
> > +	spin = spacemit_get_pin(pctrl, group->grp.pins[0]);
> > +	if (spacemit_pinconf_generate_config(spin, configs, num_configs, &value))
> > +		return -EINVAL;
> > +
> > +	for (i = 0; i < group->grp.npins; i++)
> > +		spacemit_pin_set_config(pctrl, group->grp.pins[i], value);
> > +
> > +	return 0;
> > +}
> > +
> 
> > +static void spacemit_pinconf_dbg_show(struct pinctrl_dev *pctldev,
> > +				      struct seq_file *seq, unsigned int pin)
> > +{
> > +	struct spacemit_pinctrl *pctrl = pinctrl_dev_get_drvdata(pctldev);
> > +	const struct spacemit_pin *spin = spacemit_get_pin(pctrl, pin);
> > +	enum spacemit_pin_io_type type = spacemit_to_pin_io_type(spin);
> > +	void __iomem *reg;
> > +	u32 value;
> > +
> > +	reg = spacemit_pin_to_reg(pctrl, pin);
> > +	value = readl(reg);
> > +	seq_printf(seq, ", io type (%d)", type);
> > +	seq_printf(seq, ", strong pull (%ld)", FIELD_GET(PAD_STRONG_PULL, value));
> > +	seq_printf(seq, ", register (0x%04x)\n", value);
> > +}
> 
> drop, move the "io type" to the spacemit_pctrl_dbg_show.
Ok

> "strong pull" should be handled if you use real value in
> spacemit_pinconf_get.
> 
for this reason, I will just drop it
Linus Walleij Sept. 2, 2024, 7:57 a.m. UTC | #3
Hi Yixun,

thanks for your patch! Overall the driver looks very good, it's using the
right helpers and abstractions etc.

There is this thing that needs some elaboration:

On Wed, Aug 28, 2024 at 1:31 PM Yixun Lan <dlan@gentoo.org> wrote:

> +/* pin offset */
> +#define PINID(x)       ((x) + 1)
> +
> +#define GPIO_INVAL  0
> +#define GPIO_00     PINID(0)
> +#define GPIO_01     PINID(1)
(...)

So GPIO 00 has pin ID 1 actually etc.

But why?

If there is no datasheet or other conflicting documentation, just
begin numbering the GPIOs at 1 instead of 0 to match the
hardware:

#define GPIO_01 1
#define GPIO_02 2

and all is fine.

It's just very uninituitive for developers. I guess that there
is a reason, such as that the datasheet has stated that the pin
with pin ID 1 is GPIO 00, then this needs to be explained with
a comment in the code: "we are doing this because otherwise
the developers will see an offset of -1 between the number the
pin has in the datasheet and the number they put into the
device tree, while the hardware starts the numbering at 1, the
documentation starts the numbering at 0".

It is common that engineers from analog electronics background
start numbering things from 1 while any computer science
engineer start the numbering at 0. So this is what you get when
an analog engineer designs the electronics and a computer
science engineer writes that datasheet and decides to "fix"
the problem.

Yours,
Linus Walleij
Yixun Lan Sept. 2, 2024, 3:47 p.m. UTC | #4
Hi Linus:

On 09:57 Mon 02 Sep     , Linus Walleij wrote:
> Hi Yixun,
> 
> thanks for your patch! Overall the driver looks very good, it's using the
> right helpers and abstractions etc.
> 
> There is this thing that needs some elaboration:
> 
> On Wed, Aug 28, 2024 at 1:31 PM Yixun Lan <dlan@gentoo.org> wrote:
> 
> > +/* pin offset */
> > +#define PINID(x)       ((x) + 1)
> > +
> > +#define GPIO_INVAL  0
> > +#define GPIO_00     PINID(0)
> > +#define GPIO_01     PINID(1)
> (...)
> 
> So GPIO 00 has pin ID 1 actually etc.
> 
yes, in current version

> But why?
> 
good question!

from hw perspective, the GPIO_00 pinctrl register start at offset 0x4,
see chap 3.3.1 of "Pin Information" section at [1]

and in this version of patch, we are extracting pinid from register offset,
using the algorithem pinid = (offset >> 2). this idea was something I
borrowed from vendor's driver, and now you remind me this might be wrong..

> If there is no datasheet or other conflicting documentation, just
> begin numbering the GPIOs at 1 instead of 0 to match the
> hardware:
> 
> #define GPIO_01 1
> #define GPIO_02 2
> 

as current patch version, there will be some non-linear mapping, such as
#define GPIO_98 93
#define GPIO_99 92
..
#define GPIO_110 116
...

I think we could fix this by introducing a pinid_to_register_offset() function,
which should drop the pinid = (offset >> 2) mapping, but instead, doing in the
reverse way, retrive register offset from pinid, so idealy we should get
a linear mapping of GPIO to pinid, like

#define GPIO_00 0
#define GPIO_01 1
..
#define GPIO_127 127

I will work this in next patch version.

> and all is fine.
> 
> It's just very uninituitive for developers. I guess that there
> is a reason, such as that the datasheet has stated that the pin
> with pin ID 1 is GPIO 00, then this needs to be explained with
> a comment in the code: "we are doing this because otherwise
> the developers will see an offset of -1 between the number the
> pin has in the datasheet and the number they put into the
> device tree, while the hardware starts the numbering at 1, the
> documentation starts the numbering at 0".
> 
see above, a potential solution to fix this

> It is common that engineers from analog electronics background
> start numbering things from 1 while any computer science
> engineer start the numbering at 0. So this is what you get when
> an analog engineer designs the electronics and a computer
> science engineer writes that datasheet and decides to "fix"
> the problem.
> 
true, things happens, sometimes there is gap in understanding between
analog engineers and software developers..

Link: https://developer.spacemit.com/documentation?token=An1vwTwKaigaXRkYfwmcznTXned [1]
diff mbox series

Patch

diff --git a/drivers/pinctrl/Kconfig b/drivers/pinctrl/Kconfig
index 7e4f93a3bc7ac..8358da47cd00d 100644
--- a/drivers/pinctrl/Kconfig
+++ b/drivers/pinctrl/Kconfig
@@ -583,6 +583,7 @@  source "drivers/pinctrl/qcom/Kconfig"
 source "drivers/pinctrl/realtek/Kconfig"
 source "drivers/pinctrl/renesas/Kconfig"
 source "drivers/pinctrl/samsung/Kconfig"
+source "drivers/pinctrl/spacemit/Kconfig"
 source "drivers/pinctrl/spear/Kconfig"
 source "drivers/pinctrl/sprd/Kconfig"
 source "drivers/pinctrl/starfive/Kconfig"
diff --git a/drivers/pinctrl/Makefile b/drivers/pinctrl/Makefile
index cc809669405ab..553beead7ffa0 100644
--- a/drivers/pinctrl/Makefile
+++ b/drivers/pinctrl/Makefile
@@ -73,6 +73,7 @@  obj-y				+= qcom/
 obj-$(CONFIG_ARCH_REALTEK)      += realtek/
 obj-$(CONFIG_PINCTRL_RENESAS)	+= renesas/
 obj-$(CONFIG_PINCTRL_SAMSUNG)	+= samsung/
+obj-y				+= spacemit/
 obj-$(CONFIG_PINCTRL_SPEAR)	+= spear/
 obj-y				+= sprd/
 obj-$(CONFIG_SOC_STARFIVE)	+= starfive/
diff --git a/drivers/pinctrl/spacemit/Kconfig b/drivers/pinctrl/spacemit/Kconfig
new file mode 100644
index 0000000000000..168f8a5ffbb95
--- /dev/null
+++ b/drivers/pinctrl/spacemit/Kconfig
@@ -0,0 +1,17 @@ 
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# Sophgo SoC PINCTRL drivers
+#
+
+config PINCTRL_SPACEMIT_K1
+	tristate "SpacemiT K1 SoC Pinctrl driver"
+	depends on ARCH_SPACEMIT || COMPILE_TEST
+	depends on OF
+	select GENERIC_PINCTRL_GROUPS
+	select GENERIC_PINMUX_FUNCTIONS
+	select GENERIC_PINCONF
+	help
+	  Say Y to select the pinctrl driver for K1 SoC.
+	  This pin controller allows selecting the mux function for
+	  each pin. This driver can also be built as a module called
+	  pinctrl-k1.
diff --git a/drivers/pinctrl/spacemit/Makefile b/drivers/pinctrl/spacemit/Makefile
new file mode 100644
index 0000000000000..fede1e80fe0ff
--- /dev/null
+++ b/drivers/pinctrl/spacemit/Makefile
@@ -0,0 +1,3 @@ 
+# SPDX-License-Identifier: GPL-2.0
+
+obj-$(CONFIG_PINCTRL_SPACEMIT_K1)	+= pinctrl-k1.o
diff --git a/drivers/pinctrl/spacemit/pinctrl-k1.c b/drivers/pinctrl/spacemit/pinctrl-k1.c
new file mode 100644
index 0000000000000..9faac5a629c38
--- /dev/null
+++ b/drivers/pinctrl/spacemit/pinctrl-k1.c
@@ -0,0 +1,978 @@ 
+// SPDX-License-Identifier: GPL-2.0
+/* Copyright (c) 2024 Yixun Lan <dlan@gentoo.org> */
+
+#include <linux/bitfield.h>
+#include <linux/export.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/seq_file.h>
+#include <linux/spinlock.h>
+#include <linux/module.h>
+
+#include <linux/pinctrl/consumer.h>
+#include <linux/pinctrl/machine.h>
+#include <linux/pinctrl/pinconf-generic.h>
+#include <linux/pinctrl/pinconf.h>
+#include <linux/pinctrl/pinctrl.h>
+#include <linux/pinctrl/pinmux.h>
+
+#include "../core.h"
+#include "../pinctrl-utils.h"
+#include "../pinconf.h"
+#include "../pinmux.h"
+#include "pinctrl-k1.h"
+
+/*
+ * +---------+----------+-----------+--------+--------+----------+--------+
+ * |   pull  |   drive  | schmitter |  slew  |  edge  |  strong  |   mux  |
+ * | up/down | strength |  trigger  |  rate  | detect |   pull   |  mode  |
+ * +---------+----------+-----------+--------+--------+----------+--------+
+ *   3 bits     3 bits     2 bits     1 bit    3 bits     1 bit    3 bits
+ */
+
+#define PAD_MUX			GENMASK(2, 0)
+#define PAD_STRONG_PULL		BIT(3)
+#define PAD_EDGE_RISE		BIT(4)
+#define PAD_EDGE_FALL		BIT(5)
+#define PAD_EDGE_CLEAR		BIT(6)
+#define PAD_SLEW_RATE		GENMASK(12, 11)
+#define PAD_SLEW_RATE_EN	BIT(7)
+#define PAD_SCHMITT		GENMASK(9, 8)
+#define PAD_DRIVE		GENMASK(12, 10)
+#define PAD_PULLDOWN		BIT(13)
+#define PAD_PULLUP		BIT(14)
+#define PAD_PULL_EN		BIT(15)
+
+#define spacemit_pin_to_reg(pctrl, pin)		((pctrl)->regs + (pin << 2))
+
+struct spacemit_pin {
+	u16				pin;
+	u16				flags;
+	u8				gpiofunc;
+};
+
+struct spacemit_pinctrl {
+	struct device				*dev;
+	struct pinctrl_dev			*pctl_dev;
+	const struct spacemit_pinctrl_data	*data;
+	struct pinctrl_desc			pdesc;
+
+	struct mutex				mutex;
+	raw_spinlock_t				lock;
+
+	void __iomem				*regs;
+};
+
+struct spacemit_pinctrl_data {
+	const struct pinctrl_pin_desc   *pins;
+	const struct spacemit_pin	*data;
+	u16				npins;
+};
+
+struct spacemit_pin_mux_config {
+	const struct spacemit_pin	*pin;
+	u32		config;
+};
+
+struct spacemit_pin_drv_strength {
+	u8		val;
+	u32		mA;
+};
+
+static unsigned int spacemit_dt_get_pin(u32 value)
+{
+	return (value >> 16) & GENMASK(15, 0);
+}
+
+static unsigned int spacemit_dt_get_pin_mux(u32 value)
+{
+	return value & GENMASK(15, 0);
+}
+
+static const struct spacemit_pin *spacemit_get_pin(struct spacemit_pinctrl *pctrl,
+						   unsigned long pin)
+{
+	const struct spacemit_pin *pdata = pctrl->data->data;
+	int i;
+
+	for (i = 0; i < pctrl->data->npins; i++) {
+		if (pin == pdata[i].pin)
+			return &pdata[i];
+	}
+
+	return NULL;
+}
+
+static inline enum spacemit_pin_io_type spacemit_to_pin_io_type(
+	const struct spacemit_pin *pin)
+{
+	return K1_PIN_GET_IO_TYPE(pin->flags);
+}
+
+/* External: IO voltage via external source, can be 1.8V or 3.3V */
+static const char * const io_type_desc[] = {
+	"None",
+	"Fixed/1V8",
+	"Fixed/3V3",
+	"External",
+};
+
+static void spacemit_pctrl_dbg_show(struct pinctrl_dev *pctldev,
+				    struct seq_file *seq, unsigned int pin)
+{
+	struct spacemit_pinctrl *pctrl = pinctrl_dev_get_drvdata(pctldev);
+	const struct spacemit_pin *spin = spacemit_get_pin(pctrl, pin);
+	enum spacemit_pin_io_type type = spacemit_to_pin_io_type(spin);
+	void __iomem *reg;
+	u32 value;
+
+	seq_printf(seq, "pin: %u ", spin->pin);
+
+	seq_printf(seq, "type: %s ", io_type_desc[type]);
+
+	reg = spacemit_pin_to_reg(pctrl, spin->pin);
+	value = readl(reg);
+	seq_printf(seq, "mux: %ld reg: 0x%04x", (value & PAD_MUX), value);
+}
+
+/* use IO high level output current as the table */
+static struct spacemit_pin_drv_strength spacemit_ds_1v8_tbl[4] = {
+	{ 0, 11 },
+	{ 2, 21 },
+	{ 4, 32 },
+	{ 6, 42 },
+};
+
+static struct spacemit_pin_drv_strength spacemit_ds_3v3_tbl[8] = {
+	{ 0,  7 },
+	{ 2, 10 },
+	{ 4, 13 },
+	{ 6, 16 },
+	{ 1, 19 },
+	{ 3, 23 },
+	{ 5, 26 },
+	{ 7, 29 },
+};
+
+static inline u8 spacemit_get_ds_value(struct spacemit_pin_drv_strength *tbl,
+				       u32 num, u32 mA)
+{
+	int i;
+
+	for (i = 0; i < num; i++)
+		if (mA <= tbl[i].mA)
+			return tbl[i].val;
+
+	return tbl[num - 1].val;
+}
+
+static inline u8 spacemit_get_driver_strength(enum spacemit_pin_io_type type,
+					      u32 mA)
+{
+	switch (type) {
+	case IO_TYPE_1V8:
+		return spacemit_get_ds_value(spacemit_ds_1v8_tbl,
+					     ARRAY_SIZE(spacemit_ds_1v8_tbl),
+					     mA);
+	case IO_TYPE_3V3:
+		return spacemit_get_ds_value(spacemit_ds_3v3_tbl,
+					     ARRAY_SIZE(spacemit_ds_3v3_tbl),
+					     mA);
+	default:
+		return 0;
+	}
+}
+static int spacemit_pctrl_check_power(struct pinctrl_dev *pctldev,
+				      struct device_node *dn,
+				      struct spacemit_pin_mux_config *pinmuxs,
+				      int num_pins, const char *grpname)
+{
+	struct spacemit_pinctrl *pctrl = pinctrl_dev_get_drvdata(pctldev);
+	struct device *dev = pctrl->dev;
+	enum spacemit_pin_io_type type;
+	u32 power = 0, i;
+
+	of_property_read_u32(dn, "power-source", &power);
+
+	for (i = 0; i < num_pins; i++) {
+		type = spacemit_to_pin_io_type(pinmuxs[i].pin);
+
+		if (type != IO_TYPE_EXTERNAL)
+			continue;
+
+		switch (power) {
+		case PIN_POWER_STATE_1V8:
+		case PIN_POWER_STATE_3V3:
+			break;
+		default:
+			dev_err(dev, "group %s has unsupported power\n",
+				grpname);
+			return -ENOTSUPP;
+		}
+	}
+
+	return 0;
+}
+
+static int spacemit_pctrl_dt_node_to_map(struct pinctrl_dev *pctldev,
+					 struct device_node *np,
+					 struct pinctrl_map **maps,
+					 unsigned int *num_maps)
+{
+	struct spacemit_pinctrl *pctrl = pinctrl_dev_get_drvdata(pctldev);
+	struct device *dev = pctrl->dev;
+	struct device_node *child;
+	struct pinctrl_map *map;
+	const char **grpnames;
+	const char *grpname;
+	int ngroups = 0;
+	int nmaps = 0;
+	int ret;
+
+	for_each_available_child_of_node(np, child)
+		ngroups += 1;
+
+	grpnames = devm_kcalloc(dev, ngroups, sizeof(*grpnames), GFP_KERNEL);
+	if (!grpnames)
+		return -ENOMEM;
+
+	map = devm_kcalloc(dev, ngroups * 2, sizeof(*map), GFP_KERNEL);
+	if (!map)
+		return -ENOMEM;
+
+	ngroups = 0;
+	mutex_lock(&pctrl->mutex);
+	for_each_available_child_of_node(np, child) {
+		int npins = of_property_count_u32_elems(child, "pinmux");
+		unsigned int *pins;
+		struct spacemit_pin_mux_config *pinmuxs;
+		u32 config;
+		int i;
+
+		if (npins < 1) {
+			dev_err(dev, "invalid pinctrl group %pOFn.%pOFn\n",
+				np, child);
+			ret = -EINVAL;
+			goto dt_failed;
+		}
+
+		grpname = devm_kasprintf(dev, GFP_KERNEL, "%pOFn.%pOFn",
+					 np, child);
+		if (!grpname) {
+			ret = -ENOMEM;
+			goto dt_failed;
+		}
+
+		grpnames[ngroups++] = grpname;
+
+		pins = devm_kcalloc(dev, npins, sizeof(*pins), GFP_KERNEL);
+		if (!pins) {
+			ret = -ENOMEM;
+			goto dt_failed;
+		}
+
+		pinmuxs = devm_kcalloc(dev, npins, sizeof(*pinmuxs), GFP_KERNEL);
+		if (!pinmuxs) {
+			ret = -ENOMEM;
+			goto dt_failed;
+		}
+
+		for (i = 0; i < npins; i++) {
+			ret = of_property_read_u32_index(child, "pinmux",
+							 i, &config);
+
+			if (ret)
+				goto dt_failed;
+
+			pins[i] = spacemit_dt_get_pin(config);
+			pinmuxs[i].config = config;
+			pinmuxs[i].pin = spacemit_get_pin(pctrl, pins[i]);
+
+			if (!pinmuxs[i].pin) {
+				dev_err(dev, "failed to get pin %d\n", pins[i]);
+				ret = -ENODEV;
+				goto dt_failed;
+			}
+		}
+
+		ret = spacemit_pctrl_check_power(pctldev, child, pinmuxs,
+						 npins, grpname);
+		if (ret < 0)
+			goto dt_failed;
+
+		map[nmaps].type = PIN_MAP_TYPE_MUX_GROUP;
+		map[nmaps].data.mux.function = np->name;
+		map[nmaps].data.mux.group = grpname;
+		nmaps += 1;
+
+		ret = pinctrl_generic_add_group(pctldev, grpname,
+						pins, npins, pinmuxs);
+		if (ret < 0) {
+			dev_err(dev, "failed to add group %s: %d\n", grpname, ret);
+			goto dt_failed;
+		}
+
+		ret = pinconf_generic_parse_dt_config(child, pctldev,
+						      &map[nmaps].data.configs.configs,
+						      &map[nmaps].data.configs.num_configs);
+		if (ret) {
+			dev_err(dev, "failed to parse pin config of group %s: %d\n",
+				grpname, ret);
+			goto dt_failed;
+		}
+
+		if (map[nmaps].data.configs.num_configs == 0)
+			continue;
+
+		map[nmaps].type = PIN_MAP_TYPE_CONFIGS_GROUP;
+		map[nmaps].data.configs.group_or_pin = grpname;
+		nmaps += 1;
+	}
+
+	ret = pinmux_generic_add_function(pctldev, np->name,
+					  grpnames, ngroups, NULL);
+	if (ret < 0) {
+		dev_err(dev, "error adding function %s: %d\n", np->name, ret);
+		goto function_failed;
+	}
+
+	*maps = map;
+	*num_maps = nmaps;
+	mutex_unlock(&pctrl->mutex);
+
+	return 0;
+
+dt_failed:
+	of_node_put(child);
+function_failed:
+	pinctrl_utils_free_map(pctldev, map, nmaps);
+	mutex_unlock(&pctrl->mutex);
+	return ret;
+}
+
+static const struct pinctrl_ops spacemit_pctrl_ops = {
+	.get_groups_count	= pinctrl_generic_get_group_count,
+	.get_group_name		= pinctrl_generic_get_group_name,
+	.get_group_pins		= pinctrl_generic_get_group_pins,
+	.pin_dbg_show		= spacemit_pctrl_dbg_show,
+	.dt_node_to_map		= spacemit_pctrl_dt_node_to_map,
+	.dt_free_map		= pinctrl_utils_free_map,
+};
+
+static int spacemit_pmx_set_mux(struct pinctrl_dev *pctldev,
+			      unsigned int fsel, unsigned int gsel)
+{
+	struct spacemit_pinctrl *pctrl = pinctrl_dev_get_drvdata(pctldev);
+	const struct group_desc *group;
+	const struct spacemit_pin_mux_config *configs;
+	unsigned int i, mux;
+	void __iomem *reg;
+
+	group = pinctrl_generic_get_group(pctldev, gsel);
+	if (!group)
+		return -EINVAL;
+
+	configs = group->data;
+
+	for (i = 0; i < group->grp.npins; i++) {
+		const struct spacemit_pin *spin = configs[i].pin;
+		u32 value = configs[i].config;
+		unsigned long flags;
+
+		reg = spacemit_pin_to_reg(pctrl, spin->pin);
+		mux = spacemit_dt_get_pin_mux(value);
+
+		raw_spin_lock_irqsave(&pctrl->lock, flags);
+		value = readl_relaxed(reg) & ~PAD_MUX;
+		writel_relaxed(mux | value, reg);
+		raw_spin_unlock_irqrestore(&pctrl->lock, flags);
+	}
+
+	return 0;
+}
+
+static int spacemit_request_gpio(struct pinctrl_dev *pctldev,
+				 struct pinctrl_gpio_range *range,
+				 unsigned int pin)
+{
+	struct spacemit_pinctrl *pctrl = pinctrl_dev_get_drvdata(pctldev);
+	const struct spacemit_pin *spin = spacemit_get_pin(pctrl, pin);
+	void __iomem *reg;
+
+	reg = spacemit_pin_to_reg(pctrl, pin);
+	writel(spin->gpiofunc, reg);
+
+	return 0;
+}
+
+static const struct pinmux_ops spacemit_pmx_ops = {
+	.get_functions_count	= pinmux_generic_get_function_count,
+	.get_function_name	= pinmux_generic_get_function_name,
+	.get_function_groups	= pinmux_generic_get_function_groups,
+	.set_mux		= spacemit_pmx_set_mux,
+	.gpio_request_enable	= spacemit_request_gpio,
+	.strict			= true,
+};
+
+static int spacemit_pinconf_get(struct pinctrl_dev *pctldev,
+				unsigned int pin, unsigned long *config)
+{
+	struct spacemit_pinctrl *pctrl = pinctrl_dev_get_drvdata(pctldev);
+	int param = pinconf_to_config_param(*config);
+	u32 value, arg;
+
+	if (!pin)
+		return -EINVAL;
+
+	value = readl(spacemit_pin_to_reg(pctrl, pin));
+
+	switch (param) {
+	case PIN_CONFIG_BIAS_DISABLE:
+		arg = !FIELD_GET(PAD_PULL_EN, value);
+		break;
+	case PIN_CONFIG_BIAS_PULL_DOWN:
+		arg = FIELD_GET(PAD_PULLDOWN, value);
+		break;
+	case PIN_CONFIG_BIAS_PULL_UP:
+		arg = FIELD_GET(PAD_PULLUP, value);
+		break;
+	case PIN_CONFIG_DRIVE_STRENGTH:
+		arg = FIELD_GET(PAD_DRIVE, value);
+		break;
+	case PIN_CONFIG_INPUT_SCHMITT:
+		arg = FIELD_GET(PAD_SCHMITT, value);
+		break;
+	case PIN_CONFIG_SLEW_RATE:
+		arg = FIELD_GET(PAD_SLEW_RATE, value);
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	*config = pinconf_to_config_packed(param, arg);
+
+	return 0;
+}
+
+#define ENABLE_DRV_STRENGTH	BIT(1)
+#define ENABLE_SLEW_RATE	BIT(2)
+static int spacemit_pinconf_generate_config(const struct spacemit_pin *spin,
+					    unsigned long *configs,
+					    unsigned int num_configs,
+					    u32 *value)
+{
+	enum spacemit_pin_io_type type;
+	int i, param;
+	u32 v = 0, voltage = 0, arg, val;
+	u32 flag = 0, drv_strength, slew_rate;
+
+	if (!spin)
+		return -EINVAL;
+
+	for (i = 0; i < num_configs; i++) {
+		param = pinconf_to_config_param(configs[i]);
+		arg = pinconf_to_config_argument(configs[i]);
+
+		switch (param) {
+		case PIN_CONFIG_BIAS_DISABLE:
+			v &= ~(PAD_PULL_EN | PAD_PULLDOWN | PAD_PULLUP);
+			v &= ~PAD_STRONG_PULL;
+			break;
+		case PIN_CONFIG_BIAS_PULL_DOWN:
+			v &= ~(PAD_PULLUP | PAD_STRONG_PULL);
+			v |= (PAD_PULL_EN | PAD_PULLDOWN);
+			break;
+		case PIN_CONFIG_BIAS_PULL_UP:
+			v &= ~PAD_PULLDOWN;
+			v |= (PAD_PULL_EN | PAD_PULLUP);
+
+			if (arg == 1)
+				v |= PAD_STRONG_PULL;
+			break;
+		case PIN_CONFIG_DRIVE_STRENGTH:
+			flag |= ENABLE_DRV_STRENGTH;
+			drv_strength = arg;
+			break;
+		case PIN_CONFIG_INPUT_SCHMITT:
+			v &= ~PAD_SCHMITT;
+			v |= FIELD_PREP(PAD_SCHMITT, arg);
+			break;
+		case PIN_CONFIG_POWER_SOURCE:
+			voltage = arg;
+			break;
+		case PIN_CONFIG_SLEW_RATE:
+			if (arg) {
+				flag |= ENABLE_SLEW_RATE;
+				v |= PAD_SLEW_RATE_EN;
+				slew_rate = arg;
+			} else {
+				v &= ~PAD_SLEW_RATE_EN;
+			}
+			break;
+		default:
+			return -EINVAL;
+		}
+	}
+
+	if (flag & ENABLE_DRV_STRENGTH) {
+		type = spacemit_to_pin_io_type(spin);
+
+		/* fix external io type */
+		if (type == IO_TYPE_EXTERNAL) {
+			switch (voltage) {
+			case 1800:
+				type = IO_TYPE_1V8;
+				break;
+			case 3300:
+				type = IO_TYPE_3V3;
+				break;
+			default:
+				return -EINVAL;
+			}
+		}
+
+		val = spacemit_get_driver_strength(type, drv_strength);
+
+		v &= ~PAD_DRIVE;
+		v |= FIELD_PREP(PAD_DRIVE, val);
+	}
+
+	if (flag & ENABLE_SLEW_RATE) {
+		/* check, driver strength & slew rate */
+		if (flag & ENABLE_DRV_STRENGTH) {
+			val = FIELD_GET(PAD_SLEW_RATE, v) + 2;
+			if (slew_rate > 1 && slew_rate != val) {
+				pr_err("slew rate conflict with drive strength\n");
+				return -EINVAL;
+			}
+		} else {
+			v &= ~PAD_SLEW_RATE;
+			slew_rate = slew_rate > 1 ? (slew_rate - 2) : 0;
+			v |= FIELD_PREP(PAD_SLEW_RATE, slew_rate);
+		}
+	}
+
+	*value = v;
+
+	return 0;
+}
+
+static int spacemit_pin_set_config(struct spacemit_pinctrl *pctrl,
+				 unsigned int pin,
+				 u32 value)
+{
+	const struct spacemit_pin *spin = spacemit_get_pin(pctrl, pin);
+	void __iomem *reg;
+	unsigned long flags;
+	unsigned int mux;
+
+	if (!pin)
+		return -EINVAL;
+
+	reg = spacemit_pin_to_reg(pctrl, spin->pin);
+
+	raw_spin_lock_irqsave(&pctrl->lock, flags);
+	mux = readl_relaxed(reg) & PAD_MUX;
+	writel_relaxed(mux | value, reg);
+	raw_spin_unlock_irqrestore(&pctrl->lock, flags);
+
+	return 0;
+}
+
+static int spacemit_pinconf_set(struct pinctrl_dev *pctldev,
+				unsigned int pin, unsigned long *configs,
+				unsigned int num_configs)
+{
+	struct spacemit_pinctrl *pctrl = pinctrl_dev_get_drvdata(pctldev);
+	const struct spacemit_pin *spin = spacemit_get_pin(pctrl, pin);
+	u32 value;
+
+	if (spacemit_pinconf_generate_config(spin, configs, num_configs, &value))
+		return -EINVAL;
+
+	return spacemit_pin_set_config(pctrl, pin, value);
+}
+
+static int spacemit_pinconf_group_set(struct pinctrl_dev *pctldev,
+				      unsigned int gsel,
+				      unsigned long *configs,
+				      unsigned int num_configs)
+{
+	struct spacemit_pinctrl *pctrl = pinctrl_dev_get_drvdata(pctldev);
+	const struct spacemit_pin *spin;
+	const struct group_desc *group;
+	u32 value;
+	int i;
+
+	group = pinctrl_generic_get_group(pctldev, gsel);
+	if (!group)
+		return -EINVAL;
+
+	spin = spacemit_get_pin(pctrl, group->grp.pins[0]);
+	if (spacemit_pinconf_generate_config(spin, configs, num_configs, &value))
+		return -EINVAL;
+
+	for (i = 0; i < group->grp.npins; i++)
+		spacemit_pin_set_config(pctrl, group->grp.pins[i], value);
+
+	return 0;
+}
+
+static void spacemit_pinconf_dbg_show(struct pinctrl_dev *pctldev,
+				      struct seq_file *seq, unsigned int pin)
+{
+	struct spacemit_pinctrl *pctrl = pinctrl_dev_get_drvdata(pctldev);
+	const struct spacemit_pin *spin = spacemit_get_pin(pctrl, pin);
+	enum spacemit_pin_io_type type = spacemit_to_pin_io_type(spin);
+	void __iomem *reg;
+	u32 value;
+
+	reg = spacemit_pin_to_reg(pctrl, pin);
+	value = readl(reg);
+	seq_printf(seq, ", io type (%d)", type);
+	seq_printf(seq, ", strong pull (%ld)", FIELD_GET(PAD_STRONG_PULL, value));
+	seq_printf(seq, ", register (0x%04x)\n", value);
+}
+
+static const struct pinconf_ops spacemit_pinconf_ops = {
+	.pin_config_get			= spacemit_pinconf_get,
+	.pin_config_set			= spacemit_pinconf_set,
+	.pin_config_group_set		= spacemit_pinconf_group_set,
+	.pin_config_dbg_show		= spacemit_pinconf_dbg_show,
+	.is_generic			= true,
+};
+
+static int spacemit_pinctrl_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct spacemit_pinctrl *pctrl;
+	const struct spacemit_pinctrl_data *pctrl_data;
+	int ret;
+
+	pctrl_data = device_get_match_data(dev);
+	if (!pctrl_data)
+		return -ENODEV;
+
+	if (pctrl_data->npins == 0)
+		return dev_err_probe(dev, -EINVAL, "invalid pin data\n");
+
+	pctrl = devm_kzalloc(dev, sizeof(*pctrl), GFP_KERNEL);
+	if (!pctrl)
+		return -ENOMEM;
+
+	pctrl->regs = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(pctrl->regs))
+		return PTR_ERR(pctrl->regs);
+
+	pctrl->pdesc.name = dev_name(dev);
+	pctrl->pdesc.pins = pctrl_data->pins;
+	pctrl->pdesc.npins = pctrl_data->npins;
+	pctrl->pdesc.pctlops = &spacemit_pctrl_ops;
+	pctrl->pdesc.pmxops = &spacemit_pmx_ops;
+	pctrl->pdesc.confops = &spacemit_pinconf_ops;
+	pctrl->pdesc.owner = THIS_MODULE;
+
+	pctrl->data = pctrl_data;
+	pctrl->dev = dev;
+	raw_spin_lock_init(&pctrl->lock);
+	mutex_init(&pctrl->mutex);
+
+	platform_set_drvdata(pdev, pctrl);
+
+	ret = devm_pinctrl_register_and_init(dev, &pctrl->pdesc,
+					     pctrl, &pctrl->pctl_dev);
+	if (ret)
+		return dev_err_probe(dev, ret,
+				     "fail to register pinctrl driver\n");
+
+	return pinctrl_enable(pctrl->pctl_dev);
+}
+
+static const struct pinctrl_pin_desc k1_pin_desc[] = {
+	PINCTRL_PIN(GPIO_00, "GPIO_00"),
+	PINCTRL_PIN(GPIO_01, "GPIO_01"),
+	PINCTRL_PIN(GPIO_02, "GPIO_02"),
+	PINCTRL_PIN(GPIO_03, "GPIO_03"),
+	PINCTRL_PIN(GPIO_04, "GPIO_04"),
+	PINCTRL_PIN(GPIO_05, "GPIO_05"),
+	PINCTRL_PIN(GPIO_06, "GPIO_06"),
+	PINCTRL_PIN(GPIO_07, "GPIO_07"),
+	PINCTRL_PIN(GPIO_08, "GPIO_08"),
+	PINCTRL_PIN(GPIO_09, "GPIO_09"),
+	PINCTRL_PIN(GPIO_10, "GPIO_10"),
+	PINCTRL_PIN(GPIO_11, "GPIO_11"),
+	PINCTRL_PIN(GPIO_12, "GPIO_12"),
+	PINCTRL_PIN(GPIO_13, "GPIO_13"),
+	PINCTRL_PIN(GPIO_14, "GPIO_14"),
+	PINCTRL_PIN(GPIO_15, "GPIO_15"),
+	PINCTRL_PIN(GPIO_16, "GPIO_16"),
+	PINCTRL_PIN(GPIO_17, "GPIO_17"),
+	PINCTRL_PIN(GPIO_18, "GPIO_18"),
+	PINCTRL_PIN(GPIO_19, "GPIO_19"),
+	PINCTRL_PIN(GPIO_20, "GPIO_20"),
+	PINCTRL_PIN(GPIO_21, "GPIO_21"),
+	PINCTRL_PIN(GPIO_22, "GPIO_22"),
+	PINCTRL_PIN(GPIO_23, "GPIO_23"),
+	PINCTRL_PIN(GPIO_24, "GPIO_24"),
+	PINCTRL_PIN(GPIO_25, "GPIO_25"),
+	PINCTRL_PIN(GPIO_26, "GPIO_26"),
+	PINCTRL_PIN(GPIO_27, "GPIO_27"),
+	PINCTRL_PIN(GPIO_28, "GPIO_28"),
+	PINCTRL_PIN(GPIO_29, "GPIO_29"),
+	PINCTRL_PIN(GPIO_30, "GPIO_30"),
+	PINCTRL_PIN(GPIO_31, "GPIO_31"),
+	PINCTRL_PIN(GPIO_32, "GPIO_32"),
+	PINCTRL_PIN(GPIO_33, "GPIO_33"),
+	PINCTRL_PIN(GPIO_34, "GPIO_34"),
+	PINCTRL_PIN(GPIO_35, "GPIO_35"),
+	PINCTRL_PIN(GPIO_36, "GPIO_36"),
+	PINCTRL_PIN(GPIO_37, "GPIO_37"),
+	PINCTRL_PIN(GPIO_38, "GPIO_38"),
+	PINCTRL_PIN(GPIO_39, "GPIO_39"),
+	PINCTRL_PIN(GPIO_40, "GPIO_40"),
+	PINCTRL_PIN(GPIO_41, "GPIO_41"),
+	PINCTRL_PIN(GPIO_42, "GPIO_42"),
+	PINCTRL_PIN(GPIO_43, "GPIO_43"),
+	PINCTRL_PIN(GPIO_44, "GPIO_44"),
+	PINCTRL_PIN(GPIO_45, "GPIO_45"),
+	PINCTRL_PIN(GPIO_46, "GPIO_46"),
+	PINCTRL_PIN(GPIO_47, "GPIO_47"),
+	PINCTRL_PIN(GPIO_48, "GPIO_48"),
+	PINCTRL_PIN(GPIO_49, "GPIO_49"),
+	PINCTRL_PIN(GPIO_50, "GPIO_50"),
+	PINCTRL_PIN(GPIO_51, "GPIO_51"),
+	PINCTRL_PIN(GPIO_52, "GPIO_52"),
+	PINCTRL_PIN(GPIO_53, "GPIO_53"),
+	PINCTRL_PIN(GPIO_54, "GPIO_54"),
+	PINCTRL_PIN(GPIO_55, "GPIO_55"),
+	PINCTRL_PIN(GPIO_56, "GPIO_56"),
+	PINCTRL_PIN(GPIO_57, "GPIO_57"),
+	PINCTRL_PIN(GPIO_58, "GPIO_58"),
+	PINCTRL_PIN(GPIO_59, "GPIO_59"),
+	PINCTRL_PIN(GPIO_60, "GPIO_60"),
+	PINCTRL_PIN(GPIO_61, "GPIO_61"),
+	PINCTRL_PIN(GPIO_62, "GPIO_62"),
+	PINCTRL_PIN(GPIO_63, "GPIO_63"),
+	PINCTRL_PIN(GPIO_64, "GPIO_64"),
+	PINCTRL_PIN(GPIO_65, "GPIO_65"),
+	PINCTRL_PIN(GPIO_66, "GPIO_66"),
+	PINCTRL_PIN(GPIO_67, "GPIO_67"),
+	PINCTRL_PIN(GPIO_68, "GPIO_68"),
+	PINCTRL_PIN(GPIO_69, "GPIO_69"),
+	PINCTRL_PIN(GPIO_70, "GPIO_70/PRI_DTI"),
+	PINCTRL_PIN(GPIO_71, "GPIO_71/PRI_TMS"),
+	PINCTRL_PIN(GPIO_72, "GPIO_72/PRI_TCK"),
+	PINCTRL_PIN(GPIO_73, "GPIO_73/PRI_TDO"),
+	PINCTRL_PIN(GPIO_74, "GPIO_74"),
+	PINCTRL_PIN(GPIO_75, "GPIO_75"),
+	PINCTRL_PIN(GPIO_76, "GPIO_76"),
+	PINCTRL_PIN(GPIO_77, "GPIO_77"),
+	PINCTRL_PIN(GPIO_78, "GPIO_78"),
+	PINCTRL_PIN(GPIO_79, "GPIO_79"),
+	PINCTRL_PIN(GPIO_80, "GPIO_80"),
+	PINCTRL_PIN(GPIO_81, "GPIO_81"),
+	PINCTRL_PIN(GPIO_82, "GPIO_82"),
+	PINCTRL_PIN(GPIO_83, "GPIO_83"),
+	PINCTRL_PIN(GPIO_84, "GPIO_84"),
+	PINCTRL_PIN(GPIO_85, "GPIO_85"),
+	PINCTRL_PIN(GPIO_86, "GPIO_86"),
+	PINCTRL_PIN(GPIO_87, "GPIO_87"),
+	PINCTRL_PIN(GPIO_88, "GPIO_88"),
+	PINCTRL_PIN(GPIO_89, "GPIO_89"),
+	PINCTRL_PIN(GPIO_90, "GPIO_90"),
+	PINCTRL_PIN(GPIO_91, "GPIO_91"),
+	PINCTRL_PIN(GPIO_92, "GPIO_92"),
+	PINCTRL_PIN(GPIO_93, "GPIO_93/PWR_SCL"),
+	PINCTRL_PIN(GPIO_94, "GPIO_94/PWR_SDA"),
+	PINCTRL_PIN(GPIO_95, "GPIO_95/VCX0_EN"),
+	PINCTRL_PIN(GPIO_96, "GPIO_96/DVL0"),
+	PINCTRL_PIN(GPIO_97, "GPIO_97/DVL1"),
+	PINCTRL_PIN(GPIO_98,  "GPIO_98/QSPI_DAT3"),
+	PINCTRL_PIN(GPIO_99,  "GPIO_99/QSPI_DAT2"),
+	PINCTRL_PIN(GPIO_100, "GPIO_100/QSPI_DAT1"),
+	PINCTRL_PIN(GPIO_101, "GPIO_101/QSPI_DAT0"),
+	PINCTRL_PIN(GPIO_102, "GPIO_102/QSPI_CLK"),
+	PINCTRL_PIN(GPIO_103, "GPIO_103/QSPI_CSI"),
+	PINCTRL_PIN(GPIO_104, "GPIO_104/MMC1_DAT3"),
+	PINCTRL_PIN(GPIO_105, "GPIO_105/MMC1_DAT2"),
+	PINCTRL_PIN(GPIO_106, "GPIO_106/MMC1_DAT1"),
+	PINCTRL_PIN(GPIO_107, "GPIO_107/MMC1_DAT0"),
+	PINCTRL_PIN(GPIO_108, "GPIO_108/MMC1_CMD"),
+	PINCTRL_PIN(GPIO_109, "GPIO_109/MMC1_CLK"),
+	PINCTRL_PIN(GPIO_110, "GPIO_110"),
+	PINCTRL_PIN(GPIO_111, "GPIO_111"),
+	PINCTRL_PIN(GPIO_112, "GPIO_112"),
+	PINCTRL_PIN(GPIO_113, "GPIO_113"),
+	PINCTRL_PIN(GPIO_114, "GPIO_114"),
+	PINCTRL_PIN(GPIO_115, "GPIO_115"),
+	PINCTRL_PIN(GPIO_116, "GPIO_116"),
+	PINCTRL_PIN(GPIO_117, "GPIO_117"),
+	PINCTRL_PIN(GPIO_118, "GPIO_118"),
+	PINCTRL_PIN(GPIO_119, "GPIO_119"),
+	PINCTRL_PIN(GPIO_120, "GPIO_120"),
+	PINCTRL_PIN(GPIO_121, "GPIO_121"),
+	PINCTRL_PIN(GPIO_122, "GPIO_122"),
+	PINCTRL_PIN(GPIO_123, "GPIO_123"),
+	PINCTRL_PIN(GPIO_124, "GPIO_124"),
+	PINCTRL_PIN(GPIO_125, "GPIO_125"),
+	PINCTRL_PIN(GPIO_126, "GPIO_126"),
+	PINCTRL_PIN(GPIO_127, "GPIO_127"),
+};
+
+static const struct spacemit_pin k1_pin_data[ARRAY_SIZE(k1_pin_desc)] = {
+	K1_FUNC_PIN(GPIO_00, 0, IO_TYPE_1V8),
+	K1_FUNC_PIN(GPIO_01, 0, IO_TYPE_1V8),
+	K1_FUNC_PIN(GPIO_02, 0, IO_TYPE_1V8),
+	K1_FUNC_PIN(GPIO_03, 0, IO_TYPE_1V8),
+	K1_FUNC_PIN(GPIO_04, 0, IO_TYPE_1V8),
+	K1_FUNC_PIN(GPIO_05, 0, IO_TYPE_1V8),
+	K1_FUNC_PIN(GPIO_06, 0, IO_TYPE_1V8),
+	K1_FUNC_PIN(GPIO_07, 0, IO_TYPE_1V8),
+	K1_FUNC_PIN(GPIO_08, 0, IO_TYPE_1V8),
+	K1_FUNC_PIN(GPIO_09, 0, IO_TYPE_1V8),
+	K1_FUNC_PIN(GPIO_10, 0, IO_TYPE_1V8),
+	K1_FUNC_PIN(GPIO_11, 0, IO_TYPE_1V8),
+	K1_FUNC_PIN(GPIO_12, 0, IO_TYPE_1V8),
+	K1_FUNC_PIN(GPIO_13, 0, IO_TYPE_1V8),
+	K1_FUNC_PIN(GPIO_14, 0, IO_TYPE_1V8),
+	K1_FUNC_PIN(GPIO_15, 0, IO_TYPE_1V8),
+	K1_FUNC_PIN(GPIO_16, 0, IO_TYPE_1V8),
+	K1_FUNC_PIN(GPIO_17, 0, IO_TYPE_1V8),
+	K1_FUNC_PIN(GPIO_18, 0, IO_TYPE_1V8),
+	K1_FUNC_PIN(GPIO_19, 0, IO_TYPE_1V8),
+	K1_FUNC_PIN(GPIO_20, 0, IO_TYPE_1V8),
+	K1_FUNC_PIN(GPIO_21, 0, IO_TYPE_1V8),
+	K1_FUNC_PIN(GPIO_22, 0, IO_TYPE_1V8),
+	K1_FUNC_PIN(GPIO_23, 0, IO_TYPE_1V8),
+	K1_FUNC_PIN(GPIO_24, 0, IO_TYPE_1V8),
+	K1_FUNC_PIN(GPIO_25, 0, IO_TYPE_1V8),
+	K1_FUNC_PIN(GPIO_26, 0, IO_TYPE_1V8),
+	K1_FUNC_PIN(GPIO_27, 0, IO_TYPE_1V8),
+	K1_FUNC_PIN(GPIO_28, 0, IO_TYPE_1V8),
+	K1_FUNC_PIN(GPIO_29, 0, IO_TYPE_1V8),
+	K1_FUNC_PIN(GPIO_30, 0, IO_TYPE_1V8),
+	K1_FUNC_PIN(GPIO_31, 0, IO_TYPE_1V8),
+	K1_FUNC_PIN(GPIO_32, 0, IO_TYPE_1V8),
+	K1_FUNC_PIN(GPIO_33, 0, IO_TYPE_1V8),
+	K1_FUNC_PIN(GPIO_34, 0, IO_TYPE_1V8),
+	K1_FUNC_PIN(GPIO_35, 0, IO_TYPE_1V8),
+	K1_FUNC_PIN(GPIO_36, 0, IO_TYPE_1V8),
+	K1_FUNC_PIN(GPIO_37, 0, IO_TYPE_1V8),
+	K1_FUNC_PIN(GPIO_38, 0, IO_TYPE_1V8),
+	K1_FUNC_PIN(GPIO_39, 0, IO_TYPE_1V8),
+	K1_FUNC_PIN(GPIO_40, 0, IO_TYPE_1V8),
+	K1_FUNC_PIN(GPIO_41, 0, IO_TYPE_1V8),
+	K1_FUNC_PIN(GPIO_42, 0, IO_TYPE_1V8),
+	K1_FUNC_PIN(GPIO_43, 0, IO_TYPE_1V8),
+	K1_FUNC_PIN(GPIO_44, 0, IO_TYPE_1V8),
+	K1_FUNC_PIN(GPIO_45, 0, IO_TYPE_1V8),
+	K1_FUNC_PIN(GPIO_46, 0, IO_TYPE_1V8),
+	K1_FUNC_PIN(GPIO_47, 0, IO_TYPE_EXTERNAL),
+	K1_FUNC_PIN(GPIO_48, 0, IO_TYPE_EXTERNAL),
+	K1_FUNC_PIN(GPIO_49, 0, IO_TYPE_EXTERNAL),
+	K1_FUNC_PIN(GPIO_50, 0, IO_TYPE_EXTERNAL),
+	K1_FUNC_PIN(GPIO_51, 0, IO_TYPE_EXTERNAL),
+	K1_FUNC_PIN(GPIO_52, 0, IO_TYPE_EXTERNAL),
+	K1_FUNC_PIN(GPIO_53, 0, IO_TYPE_1V8),
+	K1_FUNC_PIN(GPIO_54, 0, IO_TYPE_1V8),
+	K1_FUNC_PIN(GPIO_55, 0, IO_TYPE_1V8),
+	K1_FUNC_PIN(GPIO_56, 0, IO_TYPE_1V8),
+	K1_FUNC_PIN(GPIO_57, 0, IO_TYPE_1V8),
+	K1_FUNC_PIN(GPIO_58, 0, IO_TYPE_1V8),
+	K1_FUNC_PIN(GPIO_59, 0, IO_TYPE_1V8),
+	K1_FUNC_PIN(GPIO_60, 0, IO_TYPE_1V8),
+	K1_FUNC_PIN(GPIO_61, 0, IO_TYPE_1V8),
+	K1_FUNC_PIN(GPIO_62, 0, IO_TYPE_1V8),
+	K1_FUNC_PIN(GPIO_63, 0, IO_TYPE_1V8),
+	K1_FUNC_PIN(GPIO_64, 0, IO_TYPE_1V8),
+	K1_FUNC_PIN(GPIO_65, 0, IO_TYPE_1V8),
+	K1_FUNC_PIN(GPIO_66, 0, IO_TYPE_1V8),
+	K1_FUNC_PIN(GPIO_67, 0, IO_TYPE_1V8),
+	K1_FUNC_PIN(GPIO_68, 0, IO_TYPE_1V8),
+	K1_FUNC_PIN(GPIO_69, 0, IO_TYPE_1V8),
+	K1_FUNC_PIN(GPIO_70, 1, IO_TYPE_1V8),
+	K1_FUNC_PIN(GPIO_71, 1, IO_TYPE_1V8),
+	K1_FUNC_PIN(GPIO_72, 1, IO_TYPE_1V8),
+	K1_FUNC_PIN(GPIO_73, 1, IO_TYPE_1V8),
+	K1_FUNC_PIN(GPIO_74, 0, IO_TYPE_1V8),
+	K1_FUNC_PIN(GPIO_75, 0, IO_TYPE_EXTERNAL),
+	K1_FUNC_PIN(GPIO_76, 0, IO_TYPE_EXTERNAL),
+	K1_FUNC_PIN(GPIO_77, 0, IO_TYPE_EXTERNAL),
+	K1_FUNC_PIN(GPIO_78, 0, IO_TYPE_EXTERNAL),
+	K1_FUNC_PIN(GPIO_79, 0, IO_TYPE_EXTERNAL),
+	K1_FUNC_PIN(GPIO_80, 0, IO_TYPE_EXTERNAL),
+	K1_FUNC_PIN(GPIO_81, 0, IO_TYPE_1V8),
+	K1_FUNC_PIN(GPIO_82, 0, IO_TYPE_1V8),
+	K1_FUNC_PIN(GPIO_83, 0, IO_TYPE_1V8),
+	K1_FUNC_PIN(GPIO_84, 0, IO_TYPE_1V8),
+	K1_FUNC_PIN(GPIO_85, 0, IO_TYPE_1V8),
+	K1_FUNC_PIN(GPIO_86, 0, IO_TYPE_1V8),
+	K1_FUNC_PIN(GPIO_87, 0, IO_TYPE_1V8),
+	K1_FUNC_PIN(GPIO_88, 0, IO_TYPE_1V8),
+	K1_FUNC_PIN(GPIO_89, 0, IO_TYPE_1V8),
+	K1_FUNC_PIN(GPIO_90, 0, IO_TYPE_1V8),
+	K1_FUNC_PIN(GPIO_91, 0, IO_TYPE_1V8),
+	K1_FUNC_PIN(GPIO_92, 0, IO_TYPE_1V8),
+	K1_FUNC_PIN(GPIO_93, 1, IO_TYPE_1V8),
+	K1_FUNC_PIN(GPIO_94, 1, IO_TYPE_1V8),
+	K1_FUNC_PIN(GPIO_95, 1, IO_TYPE_1V8),
+	K1_FUNC_PIN(GPIO_96, 1, IO_TYPE_1V8),
+	K1_FUNC_PIN(GPIO_97, 1, IO_TYPE_1V8),
+	K1_FUNC_PIN(GPIO_98, 1, IO_TYPE_EXTERNAL),
+	K1_FUNC_PIN(GPIO_99, 1, IO_TYPE_EXTERNAL),
+	K1_FUNC_PIN(GPIO_100, 1, IO_TYPE_EXTERNAL),
+	K1_FUNC_PIN(GPIO_101, 1, IO_TYPE_EXTERNAL),
+	K1_FUNC_PIN(GPIO_102, 1, IO_TYPE_EXTERNAL),
+	K1_FUNC_PIN(GPIO_103, 1, IO_TYPE_EXTERNAL),
+	K1_FUNC_PIN(GPIO_104, 4, IO_TYPE_EXTERNAL),
+	K1_FUNC_PIN(GPIO_105, 4, IO_TYPE_EXTERNAL),
+	K1_FUNC_PIN(GPIO_106, 4, IO_TYPE_EXTERNAL),
+	K1_FUNC_PIN(GPIO_107, 4, IO_TYPE_EXTERNAL),
+	K1_FUNC_PIN(GPIO_108, 4, IO_TYPE_EXTERNAL),
+	K1_FUNC_PIN(GPIO_109, 4, IO_TYPE_EXTERNAL),
+	K1_FUNC_PIN(GPIO_110, 0, IO_TYPE_1V8),
+	K1_FUNC_PIN(GPIO_111, 0, IO_TYPE_1V8),
+	K1_FUNC_PIN(GPIO_112, 0, IO_TYPE_1V8),
+	K1_FUNC_PIN(GPIO_113, 0, IO_TYPE_1V8),
+	K1_FUNC_PIN(GPIO_114, 0, IO_TYPE_1V8),
+	K1_FUNC_PIN(GPIO_115, 0, IO_TYPE_1V8),
+	K1_FUNC_PIN(GPIO_116, 0, IO_TYPE_1V8),
+	K1_FUNC_PIN(GPIO_117, 0, IO_TYPE_1V8),
+	K1_FUNC_PIN(GPIO_118, 0, IO_TYPE_1V8),
+	K1_FUNC_PIN(GPIO_119, 0, IO_TYPE_1V8),
+	K1_FUNC_PIN(GPIO_120, 0, IO_TYPE_1V8),
+	K1_FUNC_PIN(GPIO_121, 0, IO_TYPE_1V8),
+	K1_FUNC_PIN(GPIO_122, 0, IO_TYPE_1V8),
+	K1_FUNC_PIN(GPIO_123, 0, IO_TYPE_1V8),
+	K1_FUNC_PIN(GPIO_124, 0, IO_TYPE_1V8),
+	K1_FUNC_PIN(GPIO_125, 0, IO_TYPE_1V8),
+	K1_FUNC_PIN(GPIO_126, 0, IO_TYPE_1V8),
+	K1_FUNC_PIN(GPIO_127, 0, IO_TYPE_1V8),
+};
+
+static const struct spacemit_pinctrl_data k1_pinctrl_data = {
+	.pins = k1_pin_desc,
+	.data = k1_pin_data,
+	.npins = ARRAY_SIZE(k1_pin_desc),
+};
+
+static const struct of_device_id k1_pinctrl_ids[] = {
+	{ .compatible = "spacemit,k1-pinctrl", .data = &k1_pinctrl_data },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, k1_pinctrl_ids);
+
+static struct platform_driver k1_pinctrl_driver = {
+	.probe	= spacemit_pinctrl_probe,
+	.driver	= {
+		.name			= "k1-pinctrl",
+		.suppress_bind_attrs	= true,
+		.of_match_table		= k1_pinctrl_ids,
+	},
+};
+module_platform_driver(k1_pinctrl_driver);
+
+MODULE_AUTHOR("Yixun Lan <dlan@gentoo.org>");
+MODULE_DESCRIPTION("Pinctrl driver for the SpacemiT K1 SoC");
+MODULE_LICENSE("GPL");
diff --git a/drivers/pinctrl/spacemit/pinctrl-k1.h b/drivers/pinctrl/spacemit/pinctrl-k1.h
new file mode 100644
index 0000000000000..fa98756cf7321
--- /dev/null
+++ b/drivers/pinctrl/spacemit/pinctrl-k1.h
@@ -0,0 +1,180 @@ 
+/* SPDX-License-Identifier: GPL-2.0 */
+/* Copyright (c) 2024 Yixun Lan <dlan@gentoo.org> */
+
+#ifndef _PINCTRL_SPACEMIT_K1_H
+#define _PINCTRL_SPACEMIT_K1_H
+
+#include <linux/bits.h>
+#include <linux/bitfield.h>
+#include <linux/device.h>
+#include <linux/mutex.h>
+#include <linux/spinlock.h>
+#include <linux/platform_device.h>
+#include <linux/pinctrl/pinctrl.h>
+#include <linux/pinctrl/pinconf.h>
+
+enum spacemit_pin_io_type {
+	IO_TYPE_NONE = 0,
+	IO_TYPE_1V8,
+	IO_TYPE_3V3,
+	IO_TYPE_EXTERNAL,
+};
+
+#define PIN_POWER_STATE_1V8		1800
+#define PIN_POWER_STATE_3V3		3300
+
+#define K1_PIN_IO_TYPE		GENMASK(2, 1)
+
+#define K1_PIN_CAP_IO_TYPE(type)				\
+	FIELD_PREP_CONST(K1_PIN_IO_TYPE, type)
+#define K1_PIN_GET_IO_TYPE(val)					\
+	FIELD_GET(K1_PIN_IO_TYPE, val)
+
+#define K1_FUNC_PIN(_id, _gpiofunc, _io)			\
+	{							\
+		.pin		= (_id),			\
+		.gpiofunc	= (_gpiofunc),			\
+		.flags		= (K1_PIN_CAP_IO_TYPE(_io)),	\
+	}
+
+/* pin offset */
+#define PINID(x)	((x) + 1)
+
+#define GPIO_INVAL  0
+#define GPIO_00     PINID(0)
+#define GPIO_01     PINID(1)
+#define GPIO_02     PINID(2)
+#define GPIO_03     PINID(3)
+#define GPIO_04     PINID(4)
+#define GPIO_05     PINID(5)
+#define GPIO_06     PINID(6)
+#define GPIO_07     PINID(7)
+#define GPIO_08     PINID(8)
+#define GPIO_09     PINID(9)
+#define GPIO_10     PINID(10)
+#define GPIO_11     PINID(11)
+#define GPIO_12     PINID(12)
+#define GPIO_13     PINID(13)
+#define GPIO_14     PINID(14)
+#define GPIO_15     PINID(15)
+#define GPIO_16     PINID(16)
+#define GPIO_17     PINID(17)
+#define GPIO_18     PINID(18)
+#define GPIO_19     PINID(19)
+#define GPIO_20     PINID(20)
+#define GPIO_21     PINID(21)
+#define GPIO_22     PINID(22)
+#define GPIO_23     PINID(23)
+#define GPIO_24     PINID(24)
+#define GPIO_25     PINID(25)
+#define GPIO_26     PINID(26)
+#define GPIO_27     PINID(27)
+#define GPIO_28     PINID(28)
+#define GPIO_29     PINID(29)
+#define GPIO_30     PINID(30)
+#define GPIO_31     PINID(31)
+
+#define GPIO_32     PINID(32)
+#define GPIO_33     PINID(33)
+#define GPIO_34     PINID(34)
+#define GPIO_35     PINID(35)
+#define GPIO_36     PINID(36)
+#define GPIO_37     PINID(37)
+#define GPIO_38     PINID(38)
+#define GPIO_39     PINID(39)
+#define GPIO_40     PINID(40)
+#define GPIO_41     PINID(41)
+#define GPIO_42     PINID(42)
+#define GPIO_43     PINID(43)
+#define GPIO_44     PINID(44)
+#define GPIO_45     PINID(45)
+#define GPIO_46     PINID(46)
+#define GPIO_47     PINID(47)
+#define GPIO_48     PINID(48)
+#define GPIO_49     PINID(49)
+#define GPIO_50     PINID(50)
+#define GPIO_51     PINID(51)
+#define GPIO_52     PINID(52)
+#define GPIO_53     PINID(53)
+#define GPIO_54     PINID(54)
+#define GPIO_55     PINID(55)
+#define GPIO_56     PINID(56)
+#define GPIO_57     PINID(57)
+#define GPIO_58     PINID(58)
+#define GPIO_59     PINID(59)
+#define GPIO_60     PINID(60)
+#define GPIO_61     PINID(61)
+#define GPIO_62     PINID(62)
+#define GPIO_63     PINID(63)
+
+#define GPIO_64     PINID(64)
+#define GPIO_65     PINID(65)
+#define GPIO_66     PINID(66)
+#define GPIO_67     PINID(67)
+#define GPIO_68     PINID(68)
+#define GPIO_69     PINID(69)
+#define GPIO_70     PINID(70)
+#define GPIO_71     PINID(71)
+#define GPIO_72     PINID(72)
+#define GPIO_73     PINID(73)
+#define GPIO_74     PINID(74)
+#define GPIO_75     PINID(75)
+#define GPIO_76     PINID(76)
+#define GPIO_77     PINID(77)
+#define GPIO_78     PINID(78)
+#define GPIO_79     PINID(79)
+#define GPIO_80     PINID(80)
+#define GPIO_81     PINID(81)
+#define GPIO_82     PINID(82)
+#define GPIO_83     PINID(83)
+#define GPIO_84     PINID(84)
+#define GPIO_85     PINID(85)
+
+#define GPIO_101    PINID(89)
+#define GPIO_100    PINID(90)
+#define GPIO_99     PINID(91)
+#define GPIO_98     PINID(92)
+#define GPIO_103    PINID(93)
+#define GPIO_102    PINID(94)
+
+#define GPIO_104    PINID(109)
+#define GPIO_105    PINID(110)
+#define GPIO_106    PINID(111)
+#define GPIO_107    PINID(112)
+#define GPIO_108    PINID(113)
+#define GPIO_109    PINID(114)
+#define GPIO_110    PINID(115)
+
+#define GPIO_93     PINID(116)
+#define GPIO_94     PINID(117)
+#define GPIO_95     PINID(118)
+#define GPIO_96     PINID(119)
+#define GPIO_97     PINID(120)
+
+#define GPIO_86     PINID(122)
+#define GPIO_87     PINID(123)
+#define GPIO_88     PINID(124)
+#define GPIO_89     PINID(125)
+#define GPIO_90     PINID(126)
+#define GPIO_91     PINID(127)
+#define GPIO_92     PINID(128)
+
+#define GPIO_111    PINID(130)
+#define GPIO_112    PINID(131)
+#define GPIO_113    PINID(132)
+#define GPIO_114    PINID(133)
+#define GPIO_115    PINID(134)
+#define GPIO_116    PINID(135)
+#define GPIO_117    PINID(136)
+#define GPIO_118    PINID(137)
+#define GPIO_119    PINID(138)
+#define GPIO_120    PINID(139)
+#define GPIO_121    PINID(140)
+#define GPIO_122    PINID(141)
+#define GPIO_123    PINID(142)
+#define GPIO_124    PINID(143)
+#define GPIO_125    PINID(144)
+#define GPIO_126    PINID(145)
+#define GPIO_127    PINID(146)
+
+#endif /* _PINCTRL_SPACEMIT_K1_H */