diff mbox series

[8/8] riscv: dtb: thead: Add BeagleV Ahead LEDs

Message ID 20240902-th1520-pinctrl-v1-8-639bf83ef50a@tenstorrent.com (mailing list archive)
State Superseded
Headers show
Series pinctrl: Add T-Head TH1520 SoC pin controllers | expand

Checks

Context Check Description
conchuod/vmtest-for-next-PR success PR summary
conchuod/patch-8-test-1 success .github/scripts/patches/tests/build_rv32_defconfig.sh
conchuod/patch-8-test-2 success .github/scripts/patches/tests/build_rv64_clang_allmodconfig.sh
conchuod/patch-8-test-3 success .github/scripts/patches/tests/build_rv64_gcc_allmodconfig.sh
conchuod/patch-8-test-4 success .github/scripts/patches/tests/build_rv64_nommu_k210_defconfig.sh
conchuod/patch-8-test-5 success .github/scripts/patches/tests/build_rv64_nommu_virt_defconfig.sh
conchuod/patch-8-test-6 success .github/scripts/patches/tests/checkpatch.sh
conchuod/patch-8-test-7 success .github/scripts/patches/tests/dtb_warn_rv64.sh
conchuod/patch-8-test-8 success .github/scripts/patches/tests/header_inline.sh
conchuod/patch-8-test-9 success .github/scripts/patches/tests/kdoc.sh
conchuod/patch-8-test-10 success .github/scripts/patches/tests/module_param.sh
conchuod/patch-8-test-11 success .github/scripts/patches/tests/verify_fixes.sh
conchuod/patch-8-test-12 success .github/scripts/patches/tests/verify_signedoff.sh

Commit Message

Drew Fustini Sept. 3, 2024, 4:07 a.m. UTC 
From: Emil Renner Berthing <emil.renner.berthing@canonical.com>

Add nodes for the 5 user controllable LEDs on the BeagleV Ahead board.

Tested-by: Thomas Bonnefille <thomas.bonnefille@bootlin.com>
Signed-off-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Signed-off-by: Drew Fustini <dfustini@tenstorrent.com>
---
 arch/riscv/boot/dts/thead/th1520-beaglev-ahead.dts | 55 ++++++++++++++++++++++
 1 file changed, 55 insertions(+)
diff mbox series

Patch

diff --git a/arch/riscv/boot/dts/thead/th1520-beaglev-ahead.dts b/arch/riscv/boot/dts/thead/th1520-beaglev-ahead.dts
index c5356f674f85..823aa5b44efb 100644
--- a/arch/riscv/boot/dts/thead/th1520-beaglev-ahead.dts
+++ b/arch/riscv/boot/dts/thead/th1520-beaglev-ahead.dts
@@ -7,6 +7,8 @@ 
 /dts-v1/;
 
 #include "th1520.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
 
 / {
 	model = "BeagleV Ahead";
@@ -34,7 +36,42 @@  chosen {
 	memory@0 {
 		device_type = "memory";
 		reg = <0x0  0x00000000  0x1 0x00000000>;
+	};
+
+	leds {
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins>;
+		compatible = "gpio-leds";
+
+		led-1 {
+			gpios = <&gpio4 8 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_BLUE>;
+			label = "led1";
+		};
+
+		led-2 {
+			gpios = <&gpio4 9 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_BLUE>;
+			label = "led2";
+		};
+
+		led-3 {
+			gpios = <&gpio4 10 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_BLUE>;
+			label = "led3";
+		};
+
+		led-4 {
+			gpios = <&gpio4 11 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_BLUE>;
+			label = "led4";
+		};
 
+		led-5 {
+			gpios = <&gpio4 12 GPIO_ACTIVE_LOW>;
+			color = <LED_COLOR_ID_BLUE>;
+			label = "led5";
+		};
 	};
 };
 
@@ -82,6 +119,24 @@  &sdio0 {
 	status = "okay";
 };
 
+&padctrl_aosys {
+	led_pins: led-0 {
+		led-pins {
+			pins = "AUDIO_PA8",  /* GPIO4_8 */
+			       "AUDIO_PA9",  /* GPIO4_9 */
+			       "AUDIO_PA10", /* GPIO4_10 */
+			       "AUDIO_PA11", /* GPIO4_11 */
+			       "AUDIO_PA12"; /* GPIO4_12 */
+			function = "gpio";
+			bias-disable;
+			drive-strength = <3>;
+			input-disable;
+			input-schmitt-disable;
+			slew-rate = <0>;
+		};
+	};
+};
+
 &padctrl0_apsys {
 	uart0_pins: uart0-0 {
 		tx-pins {