| Message ID | 20240922145151.130999-3-hal.feng@starfivetech.com (mailing list archive) |
|---|---|
| State | Handled Elsewhere |
| Headers | show |
| Series | CAST Controller Area Network driver support | expand |
On Sun, 22 Sep 2024 22:51:48 +0800, Hal Feng wrote: > From: William Qiu <william.qiu@starfivetech.com> > > Add bindings for CAST CAN Bus Controller. > > Signed-off-by: William Qiu <william.qiu@starfivetech.com> > Signed-off-by: Hal Feng <hal.feng@starfivetech.com> > --- > .../bindings/net/can/cast,can-ctrl.yaml | 106 ++++++++++++++++++ > 1 file changed, 106 insertions(+) > create mode 100644 Documentation/devicetree/bindings/net/can/cast,can-ctrl.yaml > My bot found errors running 'make dt_binding_check' on your patch: yamllint warnings/errors: ./Documentation/devicetree/bindings/net/can/cast,can-ctrl.yaml:27:9: [warning] wrong indentation: expected 10 but found 8 (indentation) dtschema/dtc warnings/errors: doc reference errors (make refcheckdocs): See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20240922145151.130999-3-hal.feng@starfivetech.com The base for the series is generally the latest rc1. A different dependency should be noted in *this* patch. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit after running the above command yourself. Note that DT_SCHEMA_FILES can be set to your schema file to speed up checking your schema. However, it must be unset to test all examples with your schema.
On Sun, Sep 22, 2024 at 10:51:48PM +0800, Hal Feng wrote: > From: William Qiu <william.qiu@starfivetech.com> > > Add bindings for CAST CAN Bus Controller. > > Signed-off-by: William Qiu <william.qiu@starfivetech.com> > Signed-off-by: Hal Feng <hal.feng@starfivetech.com> > --- > .../bindings/net/can/cast,can-ctrl.yaml | 106 ++++++++++++++++++ > 1 file changed, 106 insertions(+) > create mode 100644 Documentation/devicetree/bindings/net/can/cast,can-ctrl.yaml > > diff --git a/Documentation/devicetree/bindings/net/can/cast,can-ctrl.yaml b/Documentation/devicetree/bindings/net/can/cast,can-ctrl.yaml > new file mode 100644 > index 000000000000..2870cff80164 > --- /dev/null > +++ b/Documentation/devicetree/bindings/net/can/cast,can-ctrl.yaml > @@ -0,0 +1,106 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/net/can/cast,can-ctrl.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: CAST CAN Bus Controller > + > +description: > + This CAN Bus Controller, also called CAN-CTRL, implements a highly > + featured and reliable CAN bus controller that performs serial > + communication according to the CAN protocol. > + > + The CAN-CTRL comes in three variants, they are CC, FD, and XL. > + The CC variant supports only Classical CAN, the FD variant adds support > + for CAN FD, and the XL variant supports the Classical CAN, CAN FD, and > + CAN XL standards. > + > +maintainers: > + - William Qiu <william.qiu@starfivetech.com> > + - Hal Feng <hal.feng@starfivetech.com> > + > +properties: > + compatible: > + items: > + - enum: > + - starfive,jh7110-can > + - const: cast,can-ctrl-fd-7x10N00S00 What's the 7x10...? Perhaps some explanation on it. > + > + reg: > + maxItems: 1 > + > + interrupts: > + maxItems: 1 > + > + clocks: > + minItems: 3 > + > + clock-names: > + items: > + - const: apb > + - const: timer > + - const: core > + > + resets: > + minItems: 3 > + > + reset-names: > + items: > + - const: apb > + - const: timer > + - const: core > + > + starfive,syscon: > + $ref: /schemas/types.yaml#/definitions/phandle-array > + items: > + - items: > + - description: phandle to System Register Controller syscon node > + - description: offset of SYS_SYSCONSAIF__SYSCFG register for CAN controller > + - description: shift of SYS_SYSCONSAIF__SYSCFG register for CAN controller > + - description: mask of SYS_SYSCONSAIF__SYSCFG register for CAN controller > + description: > + Should be four parameters, the phandle to System Register Controller > + syscon node and the offset/shift/mask of SYS_SYSCONSAIF__SYSCFG register > + for CAN controller. This just repeats what the schema says. More useful would be what you need to access/control in this register. Rob
diff --git a/Documentation/devicetree/bindings/net/can/cast,can-ctrl.yaml b/Documentation/devicetree/bindings/net/can/cast,can-ctrl.yaml new file mode 100644 index 000000000000..2870cff80164 --- /dev/null +++ b/Documentation/devicetree/bindings/net/can/cast,can-ctrl.yaml @@ -0,0 +1,106 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/can/cast,can-ctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: CAST CAN Bus Controller + +description: + This CAN Bus Controller, also called CAN-CTRL, implements a highly + featured and reliable CAN bus controller that performs serial + communication according to the CAN protocol. + + The CAN-CTRL comes in three variants, they are CC, FD, and XL. + The CC variant supports only Classical CAN, the FD variant adds support + for CAN FD, and the XL variant supports the Classical CAN, CAN FD, and + CAN XL standards. + +maintainers: + - William Qiu <william.qiu@starfivetech.com> + - Hal Feng <hal.feng@starfivetech.com> + +properties: + compatible: + items: + - enum: + - starfive,jh7110-can + - const: cast,can-ctrl-fd-7x10N00S00 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + minItems: 3 + + clock-names: + items: + - const: apb + - const: timer + - const: core + + resets: + minItems: 3 + + reset-names: + items: + - const: apb + - const: timer + - const: core + + starfive,syscon: + $ref: /schemas/types.yaml#/definitions/phandle-array + items: + - items: + - description: phandle to System Register Controller syscon node + - description: offset of SYS_SYSCONSAIF__SYSCFG register for CAN controller + - description: shift of SYS_SYSCONSAIF__SYSCFG register for CAN controller + - description: mask of SYS_SYSCONSAIF__SYSCFG register for CAN controller + description: + Should be four parameters, the phandle to System Register Controller + syscon node and the offset/shift/mask of SYS_SYSCONSAIF__SYSCFG register + for CAN controller. + +allOf: + - $ref: can-controller.yaml# + - if: + properties: + compatible: + contains: + const: starfive,jh7110-can + then: + required: + - starfive,syscon + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - resets + - reset-names + +additionalProperties: false + +examples: + - | + can@130d0000{ + compatible = "starfive,jh7110-can", "cast,can-ctrl-fd-7x10N00S00"; + reg = <0x130d0000 0x1000>; + interrupts = <112>; + clocks = <&syscrg 115>, + <&syscrg 116>, + <&syscrg 117>; + clock-names = "apb", "timer", "core"; + resets = <&syscrg 111>, + <&syscrg 113>, + <&syscrg 112>; + reset-names = "apb", "timer", "core"; + starfive,syscon = <&sys_syscon 0x10 0x3 0x8>; + }; + +...