@@ -81,6 +81,11 @@ config PINCTRL_SUN9I_A80_R
default MACH_SUN9I
select PINCTRL_SUNXI
+config PINCTRL_SUN8I_V853
+ bool "Support for the Allwinner V853/V851S/V851SE PIO"
+ default MACH_SUN8I
+ select PINCTRL_SUNXI
+
config PINCTRL_SUN20I_D1
bool "Support for the Allwinner D1 PIO"
default MACH_SUN8I || (RISCV && ARCH_SUNXI)
@@ -20,6 +20,7 @@ obj-$(CONFIG_PINCTRL_SUN8I_A83T_R) += pinctrl-sun8i-a83t-r.o
obj-$(CONFIG_PINCTRL_SUN8I_H3) += pinctrl-sun8i-h3.o
obj-$(CONFIG_PINCTRL_SUN8I_H3_R) += pinctrl-sun8i-h3-r.o
obj-$(CONFIG_PINCTRL_SUN8I_V3S) += pinctrl-sun8i-v3s.o
+obj-$(CONFIG_PINCTRL_SUN8I_V853) += pinctrl-sun8i-v853.o
obj-$(CONFIG_PINCTRL_SUN20I_D1) += pinctrl-sun20i-d1.o
obj-$(CONFIG_PINCTRL_SUN50I_H5) += pinctrl-sun50i-h5.o
obj-$(CONFIG_PINCTRL_SUN50I_H6) += pinctrl-sun50i-h6.o
new file mode 100644
@@ -0,0 +1,53 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Allwinner V853 SoC pinctrl driver.
+ *
+ * Copyright (c) 2025 Andras Szemzo <szemzo.andras@gmail.com>
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/pinctrl/pinctrl.h>
+
+#include "pinctrl-sunxi.h"
+
+static const u8 v853_nr_bank_pins[SUNXI_PINCTRL_MAX_BANKS] =
+/* PA PB PC PD PE PF PG PH PI */
+ { 22, 0, 12, 23, 18, 7, 8, 16, 5 };
+
+static const unsigned int v853_irq_bank_map[] = { 0, 2, 3, 4, 5, 6, 7, 8 };
+
+static const u8 v853_irq_bank_muxes[SUNXI_PINCTRL_MAX_BANKS] =
+/* PA PB PC PD PE PF PG PH PI */
+ { 14, 0, 14, 14, 14, 14, 14, 14, 14 };
+
+static struct sunxi_pinctrl_desc v853_pinctrl_data = {
+ .irq_banks = ARRAY_SIZE(v853_irq_bank_map),
+ .irq_bank_map = v853_irq_bank_map,
+ .io_bias_cfg_variant = BIAS_VOLTAGE_PIO_POW_MODE_SEL,
+};
+
+static int v853_pinctrl_probe(struct platform_device *pdev)
+{
+ return sunxi_pinctrl_dt_table_init(pdev, v853_nr_bank_pins,
+ v853_irq_bank_muxes,
+ &v853_pinctrl_data,
+ SUNXI_PINCTRL_NEW_REG_LAYOUT |
+ SUNXI_PINCTRL_ELEVEN_BANKS);
+}
+
+static const struct of_device_id v853_pinctrl_match[] = {
+ { .compatible = "allwinner,sun8i-v853-pinctrl", },
+ {}
+};
+
+static struct platform_driver v853_pinctrl_driver = {
+ .probe = v853_pinctrl_probe,
+ .driver = {
+ .name = "sun8i-v853-pinctrl",
+ .of_match_table = v853_pinctrl_match,
+ },
+};
+builtin_platform_driver(v853_pinctrl_driver);
The V853 family has multiple package variants, from BGA to QFN88. The latter has co-packaged DRAM and fewer pins, and less features (pin muxes). All family members can be supported by a single driver, as the available pins with allowed muxes is the same across the devices. This new pinctrl driver depends on the new sunxi device-tree based mux support patch series [1]. [1]: https://lore.kernel.org/linux-sunxi/20241111005750.13071-1-andre.przywara@arm.com/T/ Signed-off-by: Andras Szemzo <szemzo.andras@gmail.com> --- drivers/pinctrl/sunxi/Kconfig | 5 ++ drivers/pinctrl/sunxi/Makefile | 1 + drivers/pinctrl/sunxi/pinctrl-sun8i-v853.c | 53 ++++++++++++++++++++++ 3 files changed, 59 insertions(+) create mode 100644 drivers/pinctrl/sunxi/pinctrl-sun8i-v853.c