diff mbox series

[v2,6/7] clk: spacemit: define new syscons with only resets

Message ID 20250328210233.1077035-7-elder@riscstar.com (mailing list archive)
State New
Headers show
Series clk: spacemit: add K1 reset support | expand

Checks

Context Check Description
bjorn/pre-ci_am fail Failed to apply series

Commit Message

Alex Elder March 28, 2025, 9:02 p.m. UTC 
Enable support for three additional syscon CCUs which support reset
controls but no clocks:  ARCPU, RCPU2, and APBC2.

Signed-off-by: Alex Elder <elder@riscstar.com>
---
v2: - Symbols are named RESET* and reset* rather than RST* and rst*

 drivers/clk/spacemit/ccu-k1.c | 106 ++++++++++++++++++++++++++++++++++
 1 file changed, 106 insertions(+)
diff mbox series

Patch

diff --git a/drivers/clk/spacemit/ccu-k1.c b/drivers/clk/spacemit/ccu-k1.c
index 6885fea81f6f3..c7c9580eab90b 100644
--- a/drivers/clk/spacemit/ccu-k1.c
+++ b/drivers/clk/spacemit/ccu-k1.c
@@ -130,6 +130,37 @@ 
 #define APMU_EMAC0_CLK_RES_CTRL		0x3e4
 #define APMU_EMAC1_CLK_RES_CTRL		0x3ec
 
+/* RCPU register offsets */
+#define RCPU_SSP0_CLK_RST		0x0028
+#define RCPU_I2C0_CLK_RST		0x0030
+#define RCPU_UART1_CLK_RST		0x003c
+#define RCPU_CAN_CLK_RST		0x0048
+#define RCPU_IR_CLK_RST			0x004c
+#define RCPU_UART0_CLK_RST		0x00d8
+/* XXX Next one is part of the AUD_AUDCLOCK region @ 0xc0882000 */
+#define AUDIO_HDMI_CLK_CTRL		0x2044
+
+/* RCPU2 register offsets */
+#define RCPU2_PWM0_CLK_RST		0x0000
+#define RCPU2_PWM1_CLK_RST		0x0004
+#define RCPU2_PWM2_CLK_RST		0x0008
+#define RCPU2_PWM3_CLK_RST		0x000c
+#define RCPU2_PWM4_CLK_RST		0x0010
+#define RCPU2_PWM5_CLK_RST		0x0014
+#define RCPU2_PWM6_CLK_RST		0x0018
+#define RCPU2_PWM7_CLK_RST		0x001c
+#define RCPU2_PWM8_CLK_RST		0x0020
+#define RCPU2_PWM9_CLK_RST		0x0024
+
+/* APBC2 register offsets */
+#define APBC2_UART1_CLK_RST		0x0000
+#define APBC2_SSP2_CLK_RST		0x0004
+#define APBC2_TWSI3_CLK_RST		0x0008
+#define APBC2_RTC_CLK_RST		0x000c
+#define APBC2_TIMERS0_CLK_RST		0x0010
+#define APBC2_KPC_CLK_RST		0x0014
+#define APBC2_GPIO_CLK_RST		0x001c
+
 struct spacemit_ccu_clk {
 	int id;
 	struct clk_hw *hw;
@@ -1781,6 +1812,69 @@  static const struct spacemit_ccu_data k1_ccu_apmu_data = {
 	.reset_data	= &apmu_reset_controller_data,
 };
 
+static const struct ccu_reset_data rcpu_reset_data[] = {
+	[RESET_RCPU_SSP0]	= RESET_DATA(RCPU_SSP0_CLK_RST,	0, BIT(0)),
+	[RESET_RCPU_I2C0]	= RESET_DATA(RCPU_I2C0_CLK_RST,	0, BIT(0)),
+	[RESET_RCPU_UART1]	= RESET_DATA(RCPU_UART1_CLK_RST, 0, BIT(0)),
+	[RESET_RCPU_IR]		= RESET_DATA(RCPU_CAN_CLK_RST,	0, BIT(0)),
+	[RESET_RCPU_CAN]	= RESET_DATA(RCPU_IR_CLK_RST,	0, BIT(0)),
+	[RESET_RCPU_UART0]	= RESET_DATA(RCPU_UART0_CLK_RST, 0, BIT(0)),
+	[RESET_RCPU_HDMI_AUDIO]	= RESET_DATA(AUDIO_HDMI_CLK_CTRL, 0, BIT(0)),
+};
+
+static const struct ccu_reset_controller_data rcpu_reset_controller_data = {
+	.count		= ARRAY_SIZE(rcpu_reset_data),
+	.data		= rcpu_reset_data,
+};
+
+static struct spacemit_ccu_data k1_ccu_rcpu_data = {
+	/* No clocks in the RCPU CCU */
+	.reset_data	= &rcpu_reset_controller_data,
+};
+
+static const struct ccu_reset_data rcpu2_reset_data[] = {
+	[RESET_RCPU2_PWM0]	= RESET_DATA(RCPU2_PWM9_CLK_RST, BIT(2), BIT(0)),
+	[RESET_RCPU2_PWM1]	= RESET_DATA(RCPU2_PWM9_CLK_RST, BIT(2), BIT(0)),
+	[RESET_RCPU2_PWM2]	= RESET_DATA(RCPU2_PWM9_CLK_RST, BIT(2), BIT(0)),
+	[RESET_RCPU2_PWM3]	= RESET_DATA(RCPU2_PWM9_CLK_RST, BIT(2), BIT(0)),
+	[RESET_RCPU2_PWM4]	= RESET_DATA(RCPU2_PWM9_CLK_RST, BIT(2), BIT(0)),
+	[RESET_RCPU2_PWM5]	= RESET_DATA(RCPU2_PWM9_CLK_RST, BIT(2), BIT(0)),
+	[RESET_RCPU2_PWM6]	= RESET_DATA(RCPU2_PWM9_CLK_RST, BIT(2), BIT(0)),
+	[RESET_RCPU2_PWM7]	= RESET_DATA(RCPU2_PWM9_CLK_RST, BIT(2), BIT(0)),
+	[RESET_RCPU2_PWM8]	= RESET_DATA(RCPU2_PWM9_CLK_RST, BIT(2), BIT(0)),
+	[RESET_RCPU2_PWM9]	= RESET_DATA(RCPU2_PWM9_CLK_RST, BIT(2), BIT(0)),
+};
+
+static const struct ccu_reset_controller_data rcpu2_reset_controller_data = {
+	.count		= ARRAY_SIZE(rcpu2_reset_data),
+	.data		= rcpu2_reset_data,
+};
+
+static struct spacemit_ccu_data k1_ccu_rcpu2_data = {
+	/* No clocks in the RCPU2 CCU */
+	.reset_data	= &rcpu2_reset_controller_data,
+};
+
+static const struct ccu_reset_data apbc2_reset_data[] = {
+	[RESET_APBC2_UART1]	= RESET_DATA(APBC2_UART1_CLK_RST, BIT(2), (0)),
+	[RESET_APBC2_SSP2]	= RESET_DATA(APBC2_SSP2_CLK_RST, BIT(2), (0)),
+	[RESET_APBC2_TWSI3]	= RESET_DATA(APBC2_TWSI3_CLK_RST, BIT(2), (0)),
+	[RESET_APBC2_RTC]	= RESET_DATA(APBC2_RTC_CLK_RST,	BIT(2), (0)),
+	[RESET_APBC2_TIMERS0]	= RESET_DATA(APBC2_TIMERS0_CLK_RST, BIT(2), (0)),
+	[RESET_APBC2_KPC]	= RESET_DATA(APBC2_KPC_CLK_RST,	BIT(2), (0)),
+	[RESET_APBC2_GPIO]	= RESET_DATA(APBC2_GPIO_CLK_RST, BIT(2), (0)),
+};
+
+static const struct ccu_reset_controller_data apbc2_reset_controller_data = {
+	.count		= ARRAY_SIZE(apbc2_reset_data),
+	.data		= apbc2_reset_data,
+};
+
+static struct spacemit_ccu_data k1_ccu_apbc2_data = {
+	/* No clocks in the APBC2 CCU */
+	.reset_data	= &apbc2_reset_controller_data,
+};
+
 static int spacemit_reset_update(struct reset_controller_dev *rcdev,
 				 unsigned long id, bool assert)
 {
@@ -1948,6 +2042,18 @@  static const struct of_device_id of_k1_ccu_match[] = {
 		.compatible	= "spacemit,k1-syscon-apmu",
 		.data		= &k1_ccu_apmu_data,
 	},
+	{
+		.compatible	= "spacemit,k1-syscon-rcpu",
+		.data		= &k1_ccu_rcpu_data,
+	},
+	{
+		.compatible	= "spacemit,k1-syscon-rcpu2",
+		.data		= &k1_ccu_rcpu2_data,
+	},
+	{
+		.compatible	= "spacemit,k1-syscon-apbc2",
+		.data		= &k1_ccu_apbc2_data,
+	},
 	{ /* sentinel */ }
 };
 MODULE_DEVICE_TABLE(of, of_k1_ccu_match);