diff mbox series

[v9,6/7] iommu/riscv: Command and fault queue support

Message ID 6916f5308478013c7b4cda77403c1e9aa9982384.1728579958.git.tjeznach@rivosinc.com (mailing list archive)
State Superseded
Headers show
Series Linux RISC-V IOMMU Support | expand

Checks

Context Check Description
conchuod/vmtest-for-next-PR fail PR summary
conchuod/patch-6-test-1 success .github/scripts/patches/tests/build_rv32_defconfig.sh took 107.25s
conchuod/patch-6-test-2 success .github/scripts/patches/tests/build_rv64_clang_allmodconfig.sh took 978.13s
conchuod/patch-6-test-3 success .github/scripts/patches/tests/build_rv64_gcc_allmodconfig.sh took 1158.17s
conchuod/patch-6-test-4 success .github/scripts/patches/tests/build_rv64_nommu_k210_defconfig.sh took 16.22s
conchuod/patch-6-test-5 success .github/scripts/patches/tests/build_rv64_nommu_virt_defconfig.sh took 17.77s
conchuod/patch-6-test-6 success .github/scripts/patches/tests/checkpatch.sh took 1.20s
conchuod/patch-6-test-7 success .github/scripts/patches/tests/dtb_warn_rv64.sh took 35.47s
conchuod/patch-6-test-8 success .github/scripts/patches/tests/header_inline.sh took 0.00s
conchuod/patch-6-test-9 success .github/scripts/patches/tests/kdoc.sh took 0.48s
conchuod/patch-6-test-10 success .github/scripts/patches/tests/module_param.sh took 0.01s
conchuod/patch-6-test-11 success .github/scripts/patches/tests/verify_fixes.sh took 0.00s
conchuod/patch-6-test-12 success .github/scripts/patches/tests/verify_signedoff.sh took 0.02s

Commit Message

Tomasz Jeznach Oct. 10, 2024, 7:48 p.m. UTC
Introduce device command submission and fault reporting queues,
as described in Chapter 3.1 and 3.2 of the RISC-V IOMMU Architecture
Specification.

Command and fault queues are instantiated in contiguous system memory
local to IOMMU device domain, or mapped from fixed I/O space provided
by the hardware implementation. Detection of the location and maximum
allowed size of the queue utilize WARL properties of queue base control
register. Driver implementation will try to allocate up to 128KB of
system memory, while respecting hardware supported maximum queue size.

Interrupts allocation is based on interrupt vectors availability and
distributed to all queues in simple round-robin fashion. For hardware
Implementation with fixed event type to interrupt vector assignment
IVEC WARL property is used to discover such mappings.

Address translation, command and queue fault handling in this change
is limited to simple fault reporting without taking any action.

Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Zong Li <zong.li@sifive.com>
Signed-off-by: Tomasz Jeznach <tjeznach@rivosinc.com>
---
 drivers/iommu/riscv/iommu-bits.h |  75 +++++
 drivers/iommu/riscv/iommu.c      | 507 ++++++++++++++++++++++++++++++-
 drivers/iommu/riscv/iommu.h      |  21 ++
 3 files changed, 601 insertions(+), 2 deletions(-)

Comments

Will Deacon Oct. 15, 2024, 8:58 a.m. UTC | #1
On Thu, Oct 10, 2024 at 12:48:09PM -0700, Tomasz Jeznach wrote:
> Introduce device command submission and fault reporting queues,
> as described in Chapter 3.1 and 3.2 of the RISC-V IOMMU Architecture
> Specification.
> 
> Command and fault queues are instantiated in contiguous system memory
> local to IOMMU device domain, or mapped from fixed I/O space provided
> by the hardware implementation. Detection of the location and maximum
> allowed size of the queue utilize WARL properties of queue base control
> register. Driver implementation will try to allocate up to 128KB of
> system memory, while respecting hardware supported maximum queue size.
> 
> Interrupts allocation is based on interrupt vectors availability and
> distributed to all queues in simple round-robin fashion. For hardware
> Implementation with fixed event type to interrupt vector assignment
> IVEC WARL property is used to discover such mappings.
> 
> Address translation, command and queue fault handling in this change
> is limited to simple fault reporting without taking any action.
> 
> Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
> Reviewed-by: Zong Li <zong.li@sifive.com>
> Signed-off-by: Tomasz Jeznach <tjeznach@rivosinc.com>
> ---
>  drivers/iommu/riscv/iommu-bits.h |  75 +++++
>  drivers/iommu/riscv/iommu.c      | 507 ++++++++++++++++++++++++++++++-
>  drivers/iommu/riscv/iommu.h      |  21 ++
>  3 files changed, 601 insertions(+), 2 deletions(-)

[...]

> +/* Enqueue an entry and wait to be processed if timeout_us > 0
> + *
> + * Error handling for IOMMU hardware not responding in reasonable time
> + * will be added as separate patch series along with other RAS features.
> + * For now, only report hardware failure and continue.
> + */
> +static unsigned int riscv_iommu_queue_send(struct riscv_iommu_queue *queue,
> +					   void *entry, size_t entry_size)
> +{
> +	unsigned int prod;
> +	unsigned int head;
> +	unsigned int tail;
> +	unsigned long flags;
> +
> +	/* Do not preempt submission flow. */
> +	local_irq_save(flags);
> +
> +	/* 1. Allocate some space in the queue */
> +	prod = atomic_inc_return(&queue->prod) - 1;
> +	head = atomic_read(&queue->head);
> +
> +	/* 2. Wait for space availability. */
> +	if ((prod - head) > queue->mask) {
> +		if (readx_poll_timeout(atomic_read, &queue->head,
> +				       head, (prod - head) < queue->mask,
> +				       0, RISCV_IOMMU_QUEUE_TIMEOUT))
> +			goto err_busy;
> +	} else if ((prod - head) == queue->mask) {
> +		const unsigned int last = Q_ITEM(queue, head);
> +
> +		if (riscv_iommu_readl_timeout(queue->iommu, Q_HEAD(queue), head,
> +					      !(head & ~queue->mask) && head != last,
> +					      0, RISCV_IOMMU_QUEUE_TIMEOUT))
> +			goto err_busy;
> +		atomic_add((head - last) & queue->mask, &queue->head);
> +	}
> +
> +	/* 3. Store entry in the ring buffer. */
> +	memcpy(queue->base + Q_ITEM(queue, prod) * entry_size, entry, entry_size);
> +
> +	/* 4. Wait for all previous entries to be ready */
> +	if (readx_poll_timeout(atomic_read, &queue->tail, tail, prod == tail,
> +			       0, RISCV_IOMMU_QUEUE_TIMEOUT))
> +		goto err_busy;
> +
> +	/* 5. Complete submission and restore local interrupts */
> +	dma_wmb();
> +	riscv_iommu_writel(queue->iommu, Q_TAIL(queue), Q_ITEM(queue, prod + 1));

Please explain why a dma_wmb() is sufficient to order the memcpy() stores
before the tail update.

> +	atomic_inc(&queue->tail);

I think this can be reordered before the relaxed MMIO write to tail,
causing other CPUs to exit their polling early.

Will
Tomasz Jeznach Oct. 16, 2024, 6:49 a.m. UTC | #2
On Tue, Oct 15, 2024 at 1:58 AM Will Deacon <will@kernel.org> wrote:
>
> On Thu, Oct 10, 2024 at 12:48:09PM -0700, Tomasz Jeznach wrote:
> > Introduce device command submission and fault reporting queues,
> > as described in Chapter 3.1 and 3.2 of the RISC-V IOMMU Architecture
> > Specification.
> >
> > Command and fault queues are instantiated in contiguous system memory
> > local to IOMMU device domain, or mapped from fixed I/O space provided
> > by the hardware implementation. Detection of the location and maximum
> > allowed size of the queue utilize WARL properties of queue base control
> > register. Driver implementation will try to allocate up to 128KB of
> > system memory, while respecting hardware supported maximum queue size.
> >
> > Interrupts allocation is based on interrupt vectors availability and
> > distributed to all queues in simple round-robin fashion. For hardware
> > Implementation with fixed event type to interrupt vector assignment
> > IVEC WARL property is used to discover such mappings.
> >
> > Address translation, command and queue fault handling in this change
> > is limited to simple fault reporting without taking any action.
> >
> > Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
> > Reviewed-by: Zong Li <zong.li@sifive.com>
> > Signed-off-by: Tomasz Jeznach <tjeznach@rivosinc.com>
> > ---
> >  drivers/iommu/riscv/iommu-bits.h |  75 +++++
> >  drivers/iommu/riscv/iommu.c      | 507 ++++++++++++++++++++++++++++++-
> >  drivers/iommu/riscv/iommu.h      |  21 ++
> >  3 files changed, 601 insertions(+), 2 deletions(-)
>
> [...]
>
> > +/* Enqueue an entry and wait to be processed if timeout_us > 0
> > + *
> > + * Error handling for IOMMU hardware not responding in reasonable time
> > + * will be added as separate patch series along with other RAS features.
> > + * For now, only report hardware failure and continue.
> > + */
> > +static unsigned int riscv_iommu_queue_send(struct riscv_iommu_queue *queue,
> > +                                        void *entry, size_t entry_size)
> > +{
> > +     unsigned int prod;
> > +     unsigned int head;
> > +     unsigned int tail;
> > +     unsigned long flags;
> > +
> > +     /* Do not preempt submission flow. */
> > +     local_irq_save(flags);
> > +
> > +     /* 1. Allocate some space in the queue */
> > +     prod = atomic_inc_return(&queue->prod) - 1;
> > +     head = atomic_read(&queue->head);
> > +
> > +     /* 2. Wait for space availability. */
> > +     if ((prod - head) > queue->mask) {
> > +             if (readx_poll_timeout(atomic_read, &queue->head,
> > +                                    head, (prod - head) < queue->mask,
> > +                                    0, RISCV_IOMMU_QUEUE_TIMEOUT))
> > +                     goto err_busy;
> > +     } else if ((prod - head) == queue->mask) {
> > +             const unsigned int last = Q_ITEM(queue, head);
> > +
> > +             if (riscv_iommu_readl_timeout(queue->iommu, Q_HEAD(queue), head,
> > +                                           !(head & ~queue->mask) && head != last,
> > +                                           0, RISCV_IOMMU_QUEUE_TIMEOUT))
> > +                     goto err_busy;
> > +             atomic_add((head - last) & queue->mask, &queue->head);
> > +     }
> > +
> > +     /* 3. Store entry in the ring buffer. */
> > +     memcpy(queue->base + Q_ITEM(queue, prod) * entry_size, entry, entry_size);
> > +
> > +     /* 4. Wait for all previous entries to be ready */
> > +     if (readx_poll_timeout(atomic_read, &queue->tail, tail, prod == tail,
> > +                            0, RISCV_IOMMU_QUEUE_TIMEOUT))
> > +             goto err_busy;
> > +
> > +     /* 5. Complete submission and restore local interrupts */
> > +     dma_wmb();
> > +     riscv_iommu_writel(queue->iommu, Q_TAIL(queue), Q_ITEM(queue, prod + 1));
>
> Please explain why a dma_wmb() is sufficient to order the memcpy() stores
> before the tail update.
>

Thanks, comment added in v10

> > +     atomic_inc(&queue->tail);
>
> I think this can be reordered before the relaxed MMIO write to tail,
> causing other CPUs to exit their polling early.
>

Very valid point, thank you! Should be fixed in v10

Best,
- Tomasz

> Will
diff mbox series

Patch

diff --git a/drivers/iommu/riscv/iommu-bits.h b/drivers/iommu/riscv/iommu-bits.h
index 3a67d4d664b0..98daf0e1a306 100644
--- a/drivers/iommu/riscv/iommu-bits.h
+++ b/drivers/iommu/riscv/iommu-bits.h
@@ -706,4 +706,79 @@  struct riscv_iommu_msipte {
 #define RISCV_IOMMU_MSIPTE_MRIF_NPPN	RISCV_IOMMU_PPN_FIELD
 #define RISCV_IOMMU_MSIPTE_MRIF_NID_MSB	BIT_ULL(60)
 
+/* Helper functions: command structure builders. */
+
+static inline void riscv_iommu_cmd_inval_vma(struct riscv_iommu_command *cmd)
+{
+	cmd->dword0 = FIELD_PREP(RISCV_IOMMU_CMD_OPCODE, RISCV_IOMMU_CMD_IOTINVAL_OPCODE) |
+		      FIELD_PREP(RISCV_IOMMU_CMD_FUNC, RISCV_IOMMU_CMD_IOTINVAL_FUNC_VMA);
+	cmd->dword1 = 0;
+}
+
+static inline void riscv_iommu_cmd_inval_set_addr(struct riscv_iommu_command *cmd,
+						  u64 addr)
+{
+	cmd->dword1 = FIELD_PREP(RISCV_IOMMU_CMD_IOTINVAL_ADDR, phys_to_pfn(addr));
+	cmd->dword0 |= RISCV_IOMMU_CMD_IOTINVAL_AV;
+}
+
+static inline void riscv_iommu_cmd_inval_set_pscid(struct riscv_iommu_command *cmd,
+						   int pscid)
+{
+	cmd->dword0 |= FIELD_PREP(RISCV_IOMMU_CMD_IOTINVAL_PSCID, pscid) |
+		       RISCV_IOMMU_CMD_IOTINVAL_PSCV;
+}
+
+static inline void riscv_iommu_cmd_inval_set_gscid(struct riscv_iommu_command *cmd,
+						   int gscid)
+{
+	cmd->dword0 |= FIELD_PREP(RISCV_IOMMU_CMD_IOTINVAL_GSCID, gscid) |
+		       RISCV_IOMMU_CMD_IOTINVAL_GV;
+}
+
+static inline void riscv_iommu_cmd_iofence(struct riscv_iommu_command *cmd)
+{
+	cmd->dword0 = FIELD_PREP(RISCV_IOMMU_CMD_OPCODE, RISCV_IOMMU_CMD_IOFENCE_OPCODE) |
+		      FIELD_PREP(RISCV_IOMMU_CMD_FUNC, RISCV_IOMMU_CMD_IOFENCE_FUNC_C) |
+		      RISCV_IOMMU_CMD_IOFENCE_PR | RISCV_IOMMU_CMD_IOFENCE_PW;
+	cmd->dword1 = 0;
+}
+
+static inline void riscv_iommu_cmd_iofence_set_av(struct riscv_iommu_command *cmd,
+						  u64 addr, u32 data)
+{
+	cmd->dword0 = FIELD_PREP(RISCV_IOMMU_CMD_OPCODE, RISCV_IOMMU_CMD_IOFENCE_OPCODE) |
+		      FIELD_PREP(RISCV_IOMMU_CMD_FUNC, RISCV_IOMMU_CMD_IOFENCE_FUNC_C) |
+		      FIELD_PREP(RISCV_IOMMU_CMD_IOFENCE_DATA, data) |
+		      RISCV_IOMMU_CMD_IOFENCE_AV;
+	cmd->dword1 = addr >> 2;
+}
+
+static inline void riscv_iommu_cmd_iodir_inval_ddt(struct riscv_iommu_command *cmd)
+{
+	cmd->dword0 = FIELD_PREP(RISCV_IOMMU_CMD_OPCODE, RISCV_IOMMU_CMD_IODIR_OPCODE) |
+		      FIELD_PREP(RISCV_IOMMU_CMD_FUNC, RISCV_IOMMU_CMD_IODIR_FUNC_INVAL_DDT);
+	cmd->dword1 = 0;
+}
+
+static inline void riscv_iommu_cmd_iodir_inval_pdt(struct riscv_iommu_command *cmd)
+{
+	cmd->dword0 = FIELD_PREP(RISCV_IOMMU_CMD_OPCODE, RISCV_IOMMU_CMD_IODIR_OPCODE) |
+		      FIELD_PREP(RISCV_IOMMU_CMD_FUNC, RISCV_IOMMU_CMD_IODIR_FUNC_INVAL_PDT);
+	cmd->dword1 = 0;
+}
+
+static inline void riscv_iommu_cmd_iodir_set_did(struct riscv_iommu_command *cmd,
+						 unsigned int devid)
+{
+	cmd->dword0 |= FIELD_PREP(RISCV_IOMMU_CMD_IODIR_DID, devid) |
+		       RISCV_IOMMU_CMD_IODIR_DV;
+}
+
+static inline void riscv_iommu_cmd_iodir_set_pid(struct riscv_iommu_command *cmd,
+						 unsigned int pasid)
+{
+	cmd->dword0 |= FIELD_PREP(RISCV_IOMMU_CMD_IODIR_PID, pasid);
+}
+
 #endif /* _RISCV_IOMMU_BITS_H_ */
diff --git a/drivers/iommu/riscv/iommu.c b/drivers/iommu/riscv/iommu.c
index d702c8f6ddf7..a00396a61439 100644
--- a/drivers/iommu/riscv/iommu.c
+++ b/drivers/iommu/riscv/iommu.c
@@ -25,7 +25,14 @@ 
 #include "iommu.h"
 
 /* Timeouts in [us] */
-#define RISCV_IOMMU_DDTP_TIMEOUT	50000
+#define RISCV_IOMMU_QCSR_TIMEOUT	150000
+#define RISCV_IOMMU_QUEUE_TIMEOUT	150000
+#define RISCV_IOMMU_DDTP_TIMEOUT	10000000
+#define RISCV_IOMMU_IOTINVAL_TIMEOUT	90000000
+
+/* Number of entries per CMD/FLT queue, should be <= INT_MAX */
+#define RISCV_IOMMU_DEF_CQ_COUNT	8192
+#define RISCV_IOMMU_DEF_FQ_COUNT	4096
 
 /* RISC-V IOMMU PPN <> PHYS address conversions, PHYS <=> PPN[53:10] */
 #define phys_to_ppn(pa)  (((pa) >> 2) & (((1ULL << 44) - 1) << 10))
@@ -89,6 +96,446 @@  static void riscv_iommu_free_pages(struct riscv_iommu_device *iommu, void *addr)
 		       riscv_iommu_devres_pages_match, &devres);
 }
 
+/*
+ * Hardware queue allocation and management.
+ */
+
+/* Setup queue base, control registers and default queue length */
+#define RISCV_IOMMU_QUEUE_INIT(q, name) do {				\
+	struct riscv_iommu_queue *_q = q;				\
+	_q->qid = RISCV_IOMMU_INTR_ ## name;				\
+	_q->qbr = RISCV_IOMMU_REG_ ## name ## B;			\
+	_q->qcr = RISCV_IOMMU_REG_ ## name ## CSR;			\
+	_q->mask = _q->mask ?: (RISCV_IOMMU_DEF_ ## name ## _COUNT) - 1;\
+} while (0)
+
+/* Note: offsets are the same for all queues */
+#define Q_HEAD(q) ((q)->qbr + (RISCV_IOMMU_REG_CQH - RISCV_IOMMU_REG_CQB))
+#define Q_TAIL(q) ((q)->qbr + (RISCV_IOMMU_REG_CQT - RISCV_IOMMU_REG_CQB))
+#define Q_ITEM(q, index) ((q)->mask & (index))
+#define Q_IPSR(q) BIT((q)->qid)
+
+/*
+ * Discover queue ring buffer hardware configuration, allocate in-memory
+ * ring buffer or use fixed I/O memory location, configure queue base register.
+ * Must be called before hardware queue is enabled.
+ *
+ * @queue - data structure, configured with RISCV_IOMMU_QUEUE_INIT()
+ * @entry_size - queue single element size in bytes.
+ */
+static int riscv_iommu_queue_alloc(struct riscv_iommu_device *iommu,
+				   struct riscv_iommu_queue *queue,
+				   size_t entry_size)
+{
+	unsigned int logsz;
+	u64 qb, rb;
+
+	/*
+	 * Use WARL base register property to discover maximum allowed
+	 * number of entries and optional fixed IO address for queue location.
+	 */
+	riscv_iommu_writeq(iommu, queue->qbr, RISCV_IOMMU_QUEUE_LOG2SZ_FIELD);
+	qb = riscv_iommu_readq(iommu, queue->qbr);
+
+	/*
+	 * Calculate and verify hardware supported queue length, as reported
+	 * by the field LOG2SZ, where max queue length is equal to 2^(LOG2SZ + 1).
+	 * Update queue size based on hardware supported value.
+	 */
+	logsz = ilog2(queue->mask);
+	if (logsz > FIELD_GET(RISCV_IOMMU_QUEUE_LOG2SZ_FIELD, qb))
+		logsz = FIELD_GET(RISCV_IOMMU_QUEUE_LOG2SZ_FIELD, qb);
+
+	/*
+	 * Use WARL base register property to discover an optional fixed IO
+	 * address for queue ring buffer location. Otherwise allocate contiguous
+	 * system memory.
+	 */
+	if (FIELD_GET(RISCV_IOMMU_PPN_FIELD, qb)) {
+		const size_t queue_size = entry_size << (logsz + 1);
+
+		queue->phys = pfn_to_phys(FIELD_GET(RISCV_IOMMU_PPN_FIELD, qb));
+		queue->base = devm_ioremap(iommu->dev, queue->phys, queue_size);
+	} else {
+		do {
+			const size_t queue_size = entry_size << (logsz + 1);
+			const int order = get_order(queue_size);
+
+			queue->base = riscv_iommu_get_pages(iommu, order);
+			queue->phys = __pa(queue->base);
+		} while (!queue->base && logsz-- > 0);
+	}
+
+	if (!queue->base)
+		return -ENOMEM;
+
+	qb = phys_to_ppn(queue->phys) |
+	     FIELD_PREP(RISCV_IOMMU_QUEUE_LOG2SZ_FIELD, logsz);
+
+	/* Update base register and read back to verify hw accepted our write */
+	riscv_iommu_writeq(iommu, queue->qbr, qb);
+	rb = riscv_iommu_readq(iommu, queue->qbr);
+	if (rb != qb) {
+		dev_err(iommu->dev, "queue #%u allocation failed\n", queue->qid);
+		return -ENODEV;
+	}
+
+	/* Update actual queue mask */
+	queue->mask = (2U << logsz) - 1;
+
+	dev_dbg(iommu->dev, "queue #%u allocated 2^%u entries",
+		queue->qid, logsz + 1);
+
+	return 0;
+}
+
+/* Check interrupt queue status, IPSR */
+static irqreturn_t riscv_iommu_queue_ipsr(int irq, void *data)
+{
+	struct riscv_iommu_queue *queue = (struct riscv_iommu_queue *)data;
+
+	if (riscv_iommu_readl(queue->iommu, RISCV_IOMMU_REG_IPSR) & Q_IPSR(queue))
+		return IRQ_WAKE_THREAD;
+
+	return IRQ_NONE;
+}
+
+static int riscv_iommu_queue_vec(struct riscv_iommu_device *iommu, int n)
+{
+	/* Reuse ICVEC.CIV mask for all interrupt vectors mapping. */
+	return (iommu->icvec >> (n * 4)) & RISCV_IOMMU_ICVEC_CIV;
+}
+
+/*
+ * Enable queue processing in the hardware, register interrupt handler.
+ *
+ * @queue - data structure, already allocated with riscv_iommu_queue_alloc()
+ * @irq_handler - threaded interrupt handler.
+ */
+static int riscv_iommu_queue_enable(struct riscv_iommu_device *iommu,
+				    struct riscv_iommu_queue *queue,
+				    irq_handler_t irq_handler)
+{
+	const unsigned int irq = iommu->irqs[riscv_iommu_queue_vec(iommu, queue->qid)];
+	u32 csr;
+	int rc;
+
+	if (queue->iommu)
+		return -EBUSY;
+
+	/* Polling not implemented */
+	if (!irq)
+		return -ENODEV;
+
+	queue->iommu = iommu;
+	rc = request_threaded_irq(irq, riscv_iommu_queue_ipsr, irq_handler,
+				  IRQF_ONESHOT | IRQF_SHARED,
+				  dev_name(iommu->dev), queue);
+	if (rc) {
+		queue->iommu = NULL;
+		return rc;
+	}
+
+	/*
+	 * Enable queue with interrupts, clear any memory fault if any.
+	 * Wait for the hardware to acknowledge request and activate queue
+	 * processing.
+	 * Note: All CSR bitfields are in the same offsets for all queues.
+	 */
+	riscv_iommu_writel(iommu, queue->qcr,
+			   RISCV_IOMMU_QUEUE_ENABLE |
+			   RISCV_IOMMU_QUEUE_INTR_ENABLE |
+			   RISCV_IOMMU_QUEUE_MEM_FAULT);
+
+	riscv_iommu_readl_timeout(iommu, queue->qcr,
+				  csr, !(csr & RISCV_IOMMU_QUEUE_BUSY),
+				  10, RISCV_IOMMU_QCSR_TIMEOUT);
+
+	if (RISCV_IOMMU_QUEUE_ACTIVE != (csr & (RISCV_IOMMU_QUEUE_ACTIVE |
+						RISCV_IOMMU_QUEUE_BUSY |
+						RISCV_IOMMU_QUEUE_MEM_FAULT))) {
+		/* Best effort to stop and disable failing hardware queue. */
+		riscv_iommu_writel(iommu, queue->qcr, 0);
+		free_irq(irq, queue);
+		queue->iommu = NULL;
+		dev_err(iommu->dev, "queue #%u failed to start\n", queue->qid);
+		return -EBUSY;
+	}
+
+	/* Clear any pending interrupt flag. */
+	riscv_iommu_writel(iommu, RISCV_IOMMU_REG_IPSR, Q_IPSR(queue));
+
+	return 0;
+}
+
+/*
+ * Disable queue. Wait for the hardware to acknowledge request and
+ * stop processing enqueued requests. Report errors but continue.
+ */
+static void riscv_iommu_queue_disable(struct riscv_iommu_queue *queue)
+{
+	struct riscv_iommu_device *iommu = queue->iommu;
+	u32 csr;
+
+	if (!iommu)
+		return;
+
+	free_irq(iommu->irqs[riscv_iommu_queue_vec(iommu, queue->qid)], queue);
+	riscv_iommu_writel(iommu, queue->qcr, 0);
+	riscv_iommu_readl_timeout(iommu, queue->qcr,
+				  csr, !(csr & RISCV_IOMMU_QUEUE_BUSY),
+				  10, RISCV_IOMMU_QCSR_TIMEOUT);
+
+	if (csr & (RISCV_IOMMU_QUEUE_ACTIVE | RISCV_IOMMU_QUEUE_BUSY))
+		dev_err(iommu->dev, "fail to disable hardware queue #%u, csr 0x%x\n",
+			queue->qid, csr);
+
+	queue->iommu = NULL;
+}
+
+/*
+ * Returns number of available valid queue entries and the first item index.
+ * Update shadow producer index if necessary.
+ */
+static int riscv_iommu_queue_consume(struct riscv_iommu_queue *queue,
+				     unsigned int *index)
+{
+	unsigned int head = atomic_read(&queue->head);
+	unsigned int tail = atomic_read(&queue->tail);
+	unsigned int last = Q_ITEM(queue, tail);
+	int available = (int)(tail - head);
+
+	*index = head;
+
+	if (available > 0)
+		return available;
+
+	/* read hardware producer index, check reserved register bits are not set. */
+	if (riscv_iommu_readl_timeout(queue->iommu, Q_TAIL(queue),
+				      tail, (tail & ~queue->mask) == 0,
+				      0, RISCV_IOMMU_QUEUE_TIMEOUT)) {
+		dev_err_once(queue->iommu->dev,
+			     "Hardware error: queue access timeout\n");
+		return 0;
+	}
+
+	if (tail == last)
+		return 0;
+
+	/* update shadow producer index */
+	return (int)(atomic_add_return((tail - last) & queue->mask, &queue->tail) - head);
+}
+
+/*
+ * Release processed queue entries, should match riscv_iommu_queue_consume() calls.
+ */
+static void riscv_iommu_queue_release(struct riscv_iommu_queue *queue, int count)
+{
+	const unsigned int head = atomic_add_return(count, &queue->head);
+
+	riscv_iommu_writel(queue->iommu, Q_HEAD(queue), Q_ITEM(queue, head));
+}
+
+/* Return actual consumer index based on hardware reported queue head index. */
+static unsigned int riscv_iommu_queue_cons(struct riscv_iommu_queue *queue)
+{
+	const unsigned int cons = atomic_read(&queue->head);
+	const unsigned int last = Q_ITEM(queue, cons);
+	unsigned int head;
+
+	if (riscv_iommu_readl_timeout(queue->iommu, Q_HEAD(queue), head,
+				      !(head & ~queue->mask),
+				      0, RISCV_IOMMU_QUEUE_TIMEOUT))
+		return cons;
+
+	return cons + ((head - last) & queue->mask);
+}
+
+/* Wait for submitted item to be processed. */
+static int riscv_iommu_queue_wait(struct riscv_iommu_queue *queue,
+				  unsigned int index,
+				  unsigned int timeout_us)
+{
+	unsigned int cons = atomic_read(&queue->head);
+
+	/* Already processed by the consumer */
+	if ((int)(cons - index) > 0)
+		return 0;
+
+	/* Monitor consumer index */
+	return readx_poll_timeout(riscv_iommu_queue_cons, queue, cons,
+				 (int)(cons - index) > 0, 0, timeout_us);
+}
+
+/* Enqueue an entry and wait to be processed if timeout_us > 0
+ *
+ * Error handling for IOMMU hardware not responding in reasonable time
+ * will be added as separate patch series along with other RAS features.
+ * For now, only report hardware failure and continue.
+ */
+static unsigned int riscv_iommu_queue_send(struct riscv_iommu_queue *queue,
+					   void *entry, size_t entry_size)
+{
+	unsigned int prod;
+	unsigned int head;
+	unsigned int tail;
+	unsigned long flags;
+
+	/* Do not preempt submission flow. */
+	local_irq_save(flags);
+
+	/* 1. Allocate some space in the queue */
+	prod = atomic_inc_return(&queue->prod) - 1;
+	head = atomic_read(&queue->head);
+
+	/* 2. Wait for space availability. */
+	if ((prod - head) > queue->mask) {
+		if (readx_poll_timeout(atomic_read, &queue->head,
+				       head, (prod - head) < queue->mask,
+				       0, RISCV_IOMMU_QUEUE_TIMEOUT))
+			goto err_busy;
+	} else if ((prod - head) == queue->mask) {
+		const unsigned int last = Q_ITEM(queue, head);
+
+		if (riscv_iommu_readl_timeout(queue->iommu, Q_HEAD(queue), head,
+					      !(head & ~queue->mask) && head != last,
+					      0, RISCV_IOMMU_QUEUE_TIMEOUT))
+			goto err_busy;
+		atomic_add((head - last) & queue->mask, &queue->head);
+	}
+
+	/* 3. Store entry in the ring buffer. */
+	memcpy(queue->base + Q_ITEM(queue, prod) * entry_size, entry, entry_size);
+
+	/* 4. Wait for all previous entries to be ready */
+	if (readx_poll_timeout(atomic_read, &queue->tail, tail, prod == tail,
+			       0, RISCV_IOMMU_QUEUE_TIMEOUT))
+		goto err_busy;
+
+	/* 5. Complete submission and restore local interrupts */
+	dma_wmb();
+	riscv_iommu_writel(queue->iommu, Q_TAIL(queue), Q_ITEM(queue, prod + 1));
+	atomic_inc(&queue->tail);
+	local_irq_restore(flags);
+
+	return prod;
+
+err_busy:
+	local_irq_restore(flags);
+	dev_err_once(queue->iommu->dev, "Hardware error: command enqueue failed\n");
+
+	return prod;
+}
+
+/*
+ * IOMMU Command queue chapter 3.1
+ */
+
+/* Command queue interrupt handler thread function */
+static irqreturn_t riscv_iommu_cmdq_process(int irq, void *data)
+{
+	const struct riscv_iommu_queue *queue = (struct riscv_iommu_queue *)data;
+	unsigned int ctrl;
+
+	/* Clear MF/CQ errors, complete error recovery to be implemented. */
+	ctrl = riscv_iommu_readl(queue->iommu, queue->qcr);
+	if (ctrl & (RISCV_IOMMU_CQCSR_CQMF | RISCV_IOMMU_CQCSR_CMD_TO |
+		    RISCV_IOMMU_CQCSR_CMD_ILL | RISCV_IOMMU_CQCSR_FENCE_W_IP)) {
+		riscv_iommu_writel(queue->iommu, queue->qcr, ctrl);
+		dev_warn(queue->iommu->dev,
+			 "Queue #%u error; fault:%d timeout:%d illegal:%d fence_w_ip:%d\n",
+			 queue->qid,
+			 !!(ctrl & RISCV_IOMMU_CQCSR_CQMF),
+			 !!(ctrl & RISCV_IOMMU_CQCSR_CMD_TO),
+			 !!(ctrl & RISCV_IOMMU_CQCSR_CMD_ILL),
+			 !!(ctrl & RISCV_IOMMU_CQCSR_FENCE_W_IP));
+	}
+
+	/* Placeholder for command queue interrupt notifiers */
+
+	/* Clear command interrupt pending. */
+	riscv_iommu_writel(queue->iommu, RISCV_IOMMU_REG_IPSR, Q_IPSR(queue));
+
+	return IRQ_HANDLED;
+}
+
+/* Send command to the IOMMU command queue */
+static void riscv_iommu_cmd_send(struct riscv_iommu_device *iommu,
+				 struct riscv_iommu_command *cmd)
+{
+	riscv_iommu_queue_send(&iommu->cmdq, cmd, sizeof(*cmd));
+}
+
+/* Send IOFENCE.C command and wait for all scheduled commands to complete. */
+static void riscv_iommu_cmd_sync(struct riscv_iommu_device *iommu,
+				 unsigned int timeout_us)
+{
+	struct riscv_iommu_command cmd;
+	unsigned int prod;
+
+	riscv_iommu_cmd_iofence(&cmd);
+	prod = riscv_iommu_queue_send(&iommu->cmdq, &cmd, sizeof(cmd));
+
+	if (!timeout_us)
+		return;
+
+	if (riscv_iommu_queue_wait(&iommu->cmdq, prod, timeout_us))
+		dev_err_once(iommu->dev,
+			     "Hardware error: command execution timeout\n");
+}
+
+/*
+ * IOMMU Fault/Event queue chapter 3.2
+ */
+
+static void riscv_iommu_fault(struct riscv_iommu_device *iommu,
+			      struct riscv_iommu_fq_record *event)
+{
+	unsigned int err = FIELD_GET(RISCV_IOMMU_FQ_HDR_CAUSE, event->hdr);
+	unsigned int devid = FIELD_GET(RISCV_IOMMU_FQ_HDR_DID, event->hdr);
+
+	/* Placeholder for future fault handling implementation, report only. */
+	if (err)
+		dev_warn_ratelimited(iommu->dev,
+				     "Fault %d devid: 0x%x iotval: %llx iotval2: %llx\n",
+				     err, devid, event->iotval, event->iotval2);
+}
+
+/* Fault queue interrupt handler thread function */
+static irqreturn_t riscv_iommu_fltq_process(int irq, void *data)
+{
+	struct riscv_iommu_queue *queue = (struct riscv_iommu_queue *)data;
+	struct riscv_iommu_device *iommu = queue->iommu;
+	struct riscv_iommu_fq_record *events;
+	unsigned int ctrl, idx;
+	int cnt, len;
+
+	events = (struct riscv_iommu_fq_record *)queue->base;
+
+	/* Clear fault interrupt pending and process all received fault events. */
+	riscv_iommu_writel(iommu, RISCV_IOMMU_REG_IPSR, Q_IPSR(queue));
+
+	do {
+		cnt = riscv_iommu_queue_consume(queue, &idx);
+		for (len = 0; len < cnt; idx++, len++)
+			riscv_iommu_fault(iommu, &events[Q_ITEM(queue, idx)]);
+		riscv_iommu_queue_release(queue, cnt);
+	} while (cnt > 0);
+
+	/* Clear MF/OF errors, complete error recovery to be implemented. */
+	ctrl = riscv_iommu_readl(iommu, queue->qcr);
+	if (ctrl & (RISCV_IOMMU_FQCSR_FQMF | RISCV_IOMMU_FQCSR_FQOF)) {
+		riscv_iommu_writel(iommu, queue->qcr, ctrl);
+		dev_warn(iommu->dev,
+			 "Queue #%u error; memory fault:%d overflow:%d\n",
+			 queue->qid,
+			 !!(ctrl & RISCV_IOMMU_FQCSR_FQMF),
+			 !!(ctrl & RISCV_IOMMU_FQCSR_FQOF));
+	}
+
+	return IRQ_HANDLED;
+}
+
 /* Lookup and initialize device context info structure. */
 static struct riscv_iommu_dc *riscv_iommu_get_dc(struct riscv_iommu_device *iommu,
 						 unsigned int devid)
@@ -250,6 +697,7 @@  static int riscv_iommu_iodir_set_mode(struct riscv_iommu_device *iommu,
 	struct device *dev = iommu->dev;
 	u64 ddtp, rq_ddtp;
 	unsigned int mode, rq_mode = ddtp_mode;
+	struct riscv_iommu_command cmd;
 
 	ddtp = riscv_iommu_read_ddtp(iommu);
 	if (ddtp & RISCV_IOMMU_DDTP_BUSY)
@@ -317,6 +765,17 @@  static int riscv_iommu_iodir_set_mode(struct riscv_iommu_device *iommu,
 	if (mode != ddtp_mode)
 		dev_dbg(dev, "DDTP hw mode %u, requested %u\n", mode, ddtp_mode);
 
+	/* Invalidate device context cache */
+	riscv_iommu_cmd_iodir_inval_ddt(&cmd);
+	riscv_iommu_cmd_send(iommu, &cmd);
+
+	/* Invalidate address translation cache */
+	riscv_iommu_cmd_inval_vma(&cmd);
+	riscv_iommu_cmd_send(iommu, &cmd);
+
+	/* IOFENCE.C */
+	riscv_iommu_cmd_sync(iommu, RISCV_IOMMU_IOTINVAL_TIMEOUT);
+
 	return 0;
 }
 
@@ -496,6 +955,24 @@  static int riscv_iommu_init_check(struct riscv_iommu_device *iommu)
 			return -EINVAL;
 	}
 
+	/*
+	 * Distribute interrupt vectors, always use first vector for CIV.
+	 * At least one interrupt is required. Read back and verify.
+	 */
+	if (!iommu->irqs_count)
+		return -EINVAL;
+
+	iommu->icvec = FIELD_PREP(RISCV_IOMMU_ICVEC_FIV, 1 % iommu->irqs_count) |
+		       FIELD_PREP(RISCV_IOMMU_ICVEC_PIV, 2 % iommu->irqs_count) |
+		       FIELD_PREP(RISCV_IOMMU_ICVEC_PMIV, 3 % iommu->irqs_count);
+	riscv_iommu_writeq(iommu, RISCV_IOMMU_REG_ICVEC, iommu->icvec);
+	iommu->icvec = riscv_iommu_readq(iommu, RISCV_IOMMU_REG_ICVEC);
+	if (max(max(FIELD_GET(RISCV_IOMMU_ICVEC_CIV, iommu->icvec),
+		    FIELD_GET(RISCV_IOMMU_ICVEC_FIV, iommu->icvec)),
+		max(FIELD_GET(RISCV_IOMMU_ICVEC_PIV, iommu->icvec),
+		    FIELD_GET(RISCV_IOMMU_ICVEC_PMIV, iommu->icvec))) >= iommu->irqs_count)
+		return -EINVAL;
+
 	return 0;
 }
 
@@ -504,12 +981,17 @@  void riscv_iommu_remove(struct riscv_iommu_device *iommu)
 	iommu_device_unregister(&iommu->iommu);
 	iommu_device_sysfs_remove(&iommu->iommu);
 	riscv_iommu_iodir_set_mode(iommu, RISCV_IOMMU_DDTP_IOMMU_MODE_OFF);
+	riscv_iommu_queue_disable(&iommu->cmdq);
+	riscv_iommu_queue_disable(&iommu->fltq);
 }
 
 int riscv_iommu_init(struct riscv_iommu_device *iommu)
 {
 	int rc;
 
+	RISCV_IOMMU_QUEUE_INIT(&iommu->cmdq, CQ);
+	RISCV_IOMMU_QUEUE_INIT(&iommu->fltq, FQ);
+
 	rc = riscv_iommu_init_check(iommu);
 	if (rc)
 		return dev_err_probe(iommu->dev, rc, "unexpected device state\n");
@@ -518,10 +1000,28 @@  int riscv_iommu_init(struct riscv_iommu_device *iommu)
 	if (rc)
 		return rc;
 
-	rc = riscv_iommu_iodir_set_mode(iommu, RISCV_IOMMU_DDTP_IOMMU_MODE_MAX);
+	rc = riscv_iommu_queue_alloc(iommu, &iommu->cmdq,
+				     sizeof(struct riscv_iommu_command));
+	if (rc)
+		return rc;
+
+	rc = riscv_iommu_queue_alloc(iommu, &iommu->fltq,
+				     sizeof(struct riscv_iommu_fq_record));
+	if (rc)
+		return rc;
+
+	rc = riscv_iommu_queue_enable(iommu, &iommu->cmdq, riscv_iommu_cmdq_process);
 	if (rc)
 		return rc;
 
+	rc = riscv_iommu_queue_enable(iommu, &iommu->fltq, riscv_iommu_fltq_process);
+	if (rc)
+		goto err_queue_disable;
+
+	rc = riscv_iommu_iodir_set_mode(iommu, RISCV_IOMMU_DDTP_IOMMU_MODE_MAX);
+	if (rc)
+		goto err_queue_disable;
+
 	rc = iommu_device_sysfs_add(&iommu->iommu, NULL, NULL, "riscv-iommu@%s",
 				    dev_name(iommu->dev));
 	if (rc) {
@@ -541,5 +1041,8 @@  int riscv_iommu_init(struct riscv_iommu_device *iommu)
 	iommu_device_sysfs_remove(&iommu->iommu);
 err_iodir_off:
 	riscv_iommu_iodir_set_mode(iommu, RISCV_IOMMU_DDTP_IOMMU_MODE_OFF);
+err_queue_disable:
+	riscv_iommu_queue_disable(&iommu->fltq);
+	riscv_iommu_queue_disable(&iommu->cmdq);
 	return rc;
 }
diff --git a/drivers/iommu/riscv/iommu.h b/drivers/iommu/riscv/iommu.h
index f1696926582c..b1c4664542b4 100644
--- a/drivers/iommu/riscv/iommu.h
+++ b/drivers/iommu/riscv/iommu.h
@@ -17,6 +17,22 @@ 
 
 #include "iommu-bits.h"
 
+struct riscv_iommu_device;
+
+struct riscv_iommu_queue {
+	atomic_t prod;				/* unbounded producer allocation index */
+	atomic_t head;				/* unbounded shadow ring buffer consumer index */
+	atomic_t tail;				/* unbounded shadow ring buffer producer index */
+	unsigned int mask;			/* index mask, queue length - 1 */
+	unsigned int irq;			/* allocated interrupt number */
+	struct riscv_iommu_device *iommu;	/* iommu device handling the queue when active */
+	void *base;				/* ring buffer kernel pointer */
+	dma_addr_t phys;			/* ring buffer physical address */
+	u16 qbr;				/* base register offset, head and tail reference */
+	u16 qcr;				/* control and status register offset */
+	u8 qid;					/* queue identifier, same as RISCV_IOMMU_INTR_XX */
+};
+
 struct riscv_iommu_device {
 	/* iommu core interface */
 	struct iommu_device iommu;
@@ -34,6 +50,11 @@  struct riscv_iommu_device {
 	/* available interrupt numbers, MSI or WSI */
 	unsigned int irqs[RISCV_IOMMU_INTR_COUNT];
 	unsigned int irqs_count;
+	unsigned int icvec;
+
+	/* hardware queues */
+	struct riscv_iommu_queue cmdq;
+	struct riscv_iommu_queue fltq;
 
 	/* device directory */
 	unsigned int ddt_mode;