diff mbox series

[2/2] serial: sifive: Remove duplicate `clkin_rate' setting

Message ID alpine.DEB.2.21.2204291656150.9383@angie.orcam.me.uk (mailing list archive)
State New, archived
Headers show
Series serial: sifive: Correct/improve baud base handling | expand

Commit Message

Maciej W. Rozycki April 29, 2022, 8:40 p.m. UTC 
The `clkin_rate' member of `struct sifive_serial_port' now duplicates 
`uartclk' from nested `struct uart_port', so use `uartclk' throughout 
and remove `clkin_rate'.

Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
---
 drivers/tty/serial/sifive.c |   14 ++++++--------
 1 file changed, 6 insertions(+), 8 deletions(-)

linux-serial-sifive-uartclk.diff
diff mbox series

Patch

Index: linux-macro/drivers/tty/serial/sifive.c
===================================================================
--- linux-macro.orig/drivers/tty/serial/sifive.c
+++ linux-macro/drivers/tty/serial/sifive.c
@@ -148,7 +148,6 @@ 
  * @port: struct uart_port embedded in this struct
  * @dev: struct device *
  * @ier: shadowed copy of the interrupt enable register
- * @clkin_rate: input clock to the UART IP block.
  * @baud_rate: UART serial line rate (e.g., 115200 baud)
  * @clk: reference to this device's clock
  * @clk_notifier: clock rate change notifier for upstream clock changes
@@ -159,7 +158,6 @@  struct sifive_serial_port {
 	struct uart_port	port;
 	struct device		*dev;
 	unsigned char		ier;
-	unsigned long		clkin_rate;
 	unsigned long		baud_rate;
 	struct clk		*clk;
 	struct notifier_block	clk_notifier;
@@ -463,7 +461,7 @@  static void __ssp_update_div(struct sifi
 {
 	u16 div;
 
-	div = DIV_ROUND_UP(ssp->clkin_rate, ssp->baud_rate) - 1;
+	div = DIV_ROUND_UP(ssp->port.uartclk, ssp->baud_rate) - 1;
 
 	__ssp_writel(div, SIFIVE_SERIAL_DIV_OFFS, ssp);
 }
@@ -648,8 +646,8 @@  static int sifive_serial_clk_notifier(st
 		udelay(DIV_ROUND_UP(12 * 1000 * 1000, ssp->baud_rate));
 	}
 
-	if (event == POST_RATE_CHANGE && ssp->clkin_rate != cnd->new_rate) {
-		ssp->clkin_rate = cnd->new_rate;
+	if (event == POST_RATE_CHANGE && ssp->port.uartclk != cnd->new_rate) {
+		ssp->port.uartclk = cnd->new_rate;
 		__ssp_update_div(ssp);
 	}
 
@@ -678,7 +676,8 @@  static void sifive_serial_set_termios(st
 	__ssp_set_stop_bits(ssp, nstop);
 
 	/* Set line rate */
-	rate = uart_get_baud_rate(port, termios, old, 0, ssp->clkin_rate / 16);
+	rate = uart_get_baud_rate(port, termios, old, 0,
+				  ssp->port.uartclk / 16);
 	__ssp_update_baud_rate(ssp, rate);
 
 	spin_lock_irqsave(&ssp->port.lock, flags);
@@ -996,9 +995,8 @@  static int sifive_serial_probe(struct pl
 	}
 
 	/* Set up clock divider */
-	ssp->clkin_rate = clk_get_rate(ssp->clk);
+	ssp->port.uartclk = clk_get_rate(ssp->clk);
 	ssp->baud_rate = SIFIVE_DEFAULT_BAUD_RATE;
-	ssp->port.uartclk = ssp->clkin_rate;
 	__ssp_update_div(ssp);
 
 	platform_set_drvdata(pdev, ssp);