diff mbox series

[v2,2/6] riscv: dts: sifive unmatched: Expose the board ID eeprom

Message ID be05f8604f72634fc21286623266a85fc12eae70.1637107062.git.plr.vincent@gmail.com (mailing list archive)
State New, archived
Headers show
Series [v2,1/6] riscv: dts: sifive unmatched: Name gpio lines | expand

Commit Message

Vincent Pelletier Nov. 16, 2021, 11:57 p.m. UTC 
Mark it as read-only as it is factory-programmed with identifying
information, and no executable nor configuration:
- eth MAC address
- board model (PCB version, BoM version)
- board serial number
Accidental modification would cause misidentification which could brick
the board, so marking read-only seem like both a safe and non-constraining
choice.

Signed-off-by: Vincent Pelletier <plr.vincent@gmail.com>

--
Changes since v1:
- Remove trailing "." on subject line.
---
 arch/riscv/boot/dts/sifive/hifive-unmatched-a00.dts | 10 ++++++++++
 1 file changed, 10 insertions(+)
diff mbox series

Patch

diff --git a/arch/riscv/boot/dts/sifive/hifive-unmatched-a00.dts b/arch/riscv/boot/dts/sifive/hifive-unmatched-a00.dts
index 305a086e5207..cf8937708829 100644
--- a/arch/riscv/boot/dts/sifive/hifive-unmatched-a00.dts
+++ b/arch/riscv/boot/dts/sifive/hifive-unmatched-a00.dts
@@ -58,6 +58,16 @@  temperature-sensor@4c {
 		interrupts = <6 IRQ_TYPE_LEVEL_LOW>;
 	};
 
+	eeprom@54 {
+		compatible = "microchip,24c02", "atmel,24c02";
+		reg = <0x54>;
+		vcc-supply = <&vdd_bpro>;
+		label = "board-id";
+		pagesize = <16>;
+		read-only;
+		size = <256>;
+	};
+
 	pmic@58 {
 		compatible = "dlg,da9063";
 		reg = <0x58>;