diff mbox

[v3,6/6] ARM: shmobile: lager: Enable UHS-I SDR-50

Message ID 1435332239.23818.13.camel@codethink.co.uk (mailing list archive)
State Superseded
Delegated to: Simon Horman
Headers show

Commit Message

Ben Hutchings June 26, 2015, 3:23 p.m. UTC
Add the "1v8" pinctrl state and sd-uhs-sdr50 property to SDHI{0,2}.

Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
---
 arch/arm/boot/dts/r8a7790-lager.dts | 22 ++++++++++++++++++++--
 1 file changed, 20 insertions(+), 2 deletions(-)
diff mbox

Patch

diff --git a/arch/arm/boot/dts/r8a7790-lager.dts b/arch/arm/boot/dts/r8a7790-lager.dts
index 5f68e53c58ae..c7db213054f6 100644
--- a/arch/arm/boot/dts/r8a7790-lager.dts
+++ b/arch/arm/boot/dts/r8a7790-lager.dts
@@ -312,11 +312,25 @@ 
 	sdhi0_pins: sd0 {
 		renesas,groups = "sdhi0_data4", "sdhi0_ctrl";
 		renesas,function = "sdhi0";
+		power-source = <0>;
+	};
+
+	sdhi0_pins_1v8: sd0_1v8 {
+		renesas,groups = "sdhi0_data4", "sdhi0_ctrl";
+		renesas,function = "sdhi0";
+		power-source = <1>;
 	};
 
 	sdhi2_pins: sd2 {
 		renesas,groups = "sdhi2_data4", "sdhi2_ctrl";
 		renesas,function = "sdhi2";
+		power-source = <0>;
+	};
+
+	sdhi2_pins_1v8: sd2_1v8 {
+		renesas,groups = "sdhi2_data4", "sdhi2_ctrl";
+		renesas,function = "sdhi2";
+		power-source = <1>;
 	};
 
 	mmc1_pins: mmc1 {
@@ -486,7 +500,8 @@ 
 
 &sdhi0 {
 	pinctrl-0 = <&sdhi0_pins>;
-	pinctrl-names = "default";
+	pinctrl-1 = <&sdhi0_pins_1v8>;
+	pinctrl-names = "default", "1v8";
 
 	assigned-clocks = <&mstp3_clks R8A7790_CLK_SDHI0>;
 	assigned-clock-rates = <156000000>;
@@ -494,12 +509,14 @@ 
 	vmmc-supply = <&vcc_sdhi0>;
 	vqmmc-supply = <&vccq_sdhi0>;
 	cd-gpios = <&gpio3 6 GPIO_ACTIVE_LOW>;
+	sd-uhs-sdr50;
 	status = "okay";
 };
 
 &sdhi2 {
 	pinctrl-0 = <&sdhi2_pins>;
-	pinctrl-names = "default";
+	pinctrl-1 = <&sdhi2_pins_1v8>;
+	pinctrl-names = "default", "1v8";
 
 	assigned-clocks = <&mstp3_clks R8A7790_CLK_SDHI2>;
 	assigned-clock-rates = <97500000>;
@@ -507,6 +524,7 @@ 
 	vmmc-supply = <&vcc_sdhi2>;
 	vqmmc-supply = <&vccq_sdhi2>;
 	cd-gpios = <&gpio3 22 GPIO_ACTIVE_LOW>;
+	sd-uhs-sdr50;
 	status = "okay";
 };