mbox series

[0/6] ARM: dts: Add Raspberry Pi 400 support

Message ID 1622366775-5309-1-git-send-email-stefan.wahren@i2se.com (mailing list archive)
Headers show
Series ARM: dts: Add Raspberry Pi 400 support | expand

Message

Stefan Wahren May 30, 2021, 9:26 a.m. UTC 
This series adds support for the Raspberry Pi 400.

Stefan Wahren (6):
  ARM: dts: bcm283x: Fix up MMC node names
  watchdog: bcm2835_wdt: consider system-power-controller property
  ARM: dts: Move BCM2711 RPi specific into separate dtsi
  dt-bindings: arm: bcm2835: Add Raspberry Pi 400 to DT schema
  ARM: dts: Add Raspberry Pi 400 support
  arm64: dts: broadcom: Add reference to RPi 400

 .../devicetree/bindings/arm/bcm/bcm2835.yaml       |   1 +
 arch/arm/boot/dts/Makefile                         |   1 +
 arch/arm/boot/dts/bcm2711-rpi-4-b.dts              |  62 +----
 arch/arm/boot/dts/bcm2711-rpi-400.dts              | 271 +++++++++++++++++++++
 arch/arm/boot/dts/bcm2711-rpi.dtsi                 |  75 ++++++
 arch/arm/boot/dts/bcm2711.dtsi                     |   2 +-
 arch/arm/boot/dts/bcm283x.dtsi                     |   2 +-
 arch/arm64/boot/dts/broadcom/Makefile              |   3 +-
 arch/arm64/boot/dts/broadcom/bcm2711-rpi-400.dts   |   2 +
 drivers/watchdog/bcm2835_wdt.c                     |  10 +-
 10 files changed, 362 insertions(+), 67 deletions(-)
 create mode 100644 arch/arm/boot/dts/bcm2711-rpi-400.dts
 create mode 100644 arch/arm/boot/dts/bcm2711-rpi.dtsi
 create mode 100644 arch/arm64/boot/dts/broadcom/bcm2711-rpi-400.dts