mbox series

[v3,0/7] Add initial Keem Bay SoC / Board support

Message ID 20200714161305.836348-1-daniele.alessandrelli@linux.intel.com (mailing list archive)
Headers show
Series Add initial Keem Bay SoC / Board support | expand

Message

Daniele Alessandrelli July 14, 2020, 4:12 p.m. UTC
Hi,

This patch-set adds initial support for a new Intel Movidius SoC code-named
Keem Bay. The SoC couples an ARM Cortex A53 CPU with an Intel Movidius VPU.

This initial patch-set enables only the minimal set of components required
to make the Keem Bay EVM board boot into initramfs.

Changes from v2 to v3:
* Split dt-bindings patch into 3 different patches (SoC/board bindings,
  clock bindings, and power domains bindings).
* Added dual license (GPL-2.0-only or BSD-3-Clause) to dt-bindings header
  files and DTS files.

Changes from v1 to v2:
* Moved keembay-scmi-mailbox driver to a separate patchset
* Removed Keem Bay SCMI mailbox and SCMI node from Keem Bay SoC device tree

Regards,
Daniele

Daniele Alessandrelli (7):
  arm64: Add config for Keem Bay SoC
  dt-bindings: arm: Add Keem Bay bindings
  dt-bindings: clock: Add Keem Bay clock IDs
  dt-bindings: power: Add Keem Bay power domains
  MAINTAINERS: Add maintainers for Keem Bay SoC
  arm64: dts: keembay: Add device tree for Keem Bay SoC
  arm64: dts: keembay: Add device tree for Keem Bay EVM board

 .../devicetree/bindings/arm/keembay.yaml      |  19 ++
 MAINTAINERS                                   |  10 +
 arch/arm64/Kconfig.platforms                  |   5 +
 arch/arm64/boot/dts/intel/Makefile            |   1 +
 arch/arm64/boot/dts/intel/keembay-evm.dts     |  39 ++++
 arch/arm64/boot/dts/intel/keembay-soc.dtsi    | 125 ++++++++++++
 include/dt-bindings/clock/keembay-clocks.h    | 188 ++++++++++++++++++
 include/dt-bindings/power/keembay-power.h     |  19 ++
 8 files changed, 406 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/arm/keembay.yaml
 create mode 100644 arch/arm64/boot/dts/intel/keembay-evm.dts
 create mode 100644 arch/arm64/boot/dts/intel/keembay-soc.dtsi
 create mode 100644 include/dt-bindings/clock/keembay-clocks.h
 create mode 100644 include/dt-bindings/power/keembay-power.h