mbox series

[0/7] ARM: dts: at91: add Exegin Q5xR5 and CalAmp LMU5000

Message ID 20210805155357.594414-1-claudiu.beznea@microchip.com (mailing list archive)
Headers show
Series ARM: dts: at91: add Exegin Q5xR5 and CalAmp LMU5000 | expand

Message

Claudiu Beznea Aug. 5, 2021, 3:53 p.m. UTC 
Hi,

This series adds support for Exegin Q5xR5 and CalAmp LMU5000 boards
which were maintained up to this moment, separatelly, in OpenWrt tree.
With these patches the support for these boards will be included in
upstream kernel and there will be no need to forward port the proper
patches in OpenWrt every time the OpenWrt kernel version is changed.

Thank you,
Claudiu Beznea

Adam Porter (1):
  ARM: dts: at91: add CalAmp LMU5000 board

Claudiu Beznea (5):
  ARM: dts: at91: at91sam9260: add pinctrl label
  dt-bindings: add vendor prefix for exegin
  dt-bindings: ARM: at91: document exegin q5xr5 board
  dt-bindings: add vendor prefix for calamp
  dt-bindings: ARM: at91: document CalAmp LMU5000 board

Owen Kirby (1):
  ARM: dts: at91: add Exegin Q5xR5 board

 .../devicetree/bindings/arm/atmel-at91.yaml   |  12 ++
 .../devicetree/bindings/vendor-prefixes.yaml  |   4 +
 arch/arm/boot/dts/Makefile                    |   2 +
 arch/arm/boot/dts/at91-lmu5000.dts            | 148 +++++++++++++
 arch/arm/boot/dts/at91-q5xr5.dts              | 200 ++++++++++++++++++
 arch/arm/boot/dts/at91sam9260.dtsi            |   2 +-
 6 files changed, 367 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm/boot/dts/at91-lmu5000.dts
 create mode 100644 arch/arm/boot/dts/at91-q5xr5.dts