@@ -60,6 +60,36 @@ static struct uartinit uartinit_data[] __initdata = {
},
};
+/* LPC3250 Errata HSUART.1: Hang workaround via loopback mode on inactivity */
+void lpc32xx_loopback_set(resource_size_t mapbase, int state)
+{
+ int bit;
+ u32 tmp;
+
+ switch (mapbase) {
+ case LPC32XX_HS_UART1_BASE:
+ bit = 0;
+ break;
+ case LPC32XX_HS_UART2_BASE:
+ bit = 1;
+ break;
+ case LPC32XX_HS_UART7_BASE:
+ bit = 6;
+ break;
+ default:
+ WARN(1, "lpc32xx_hs: Warning: Unknown port at %08x\n", mapbase);
+ return;
+ }
+
+ tmp = readl(LPC32XX_UARTCTL_CLOOP);
+ if (state)
+ tmp |= (1 << bit);
+ else
+ tmp &= ~(1 << bit);
+ writel(tmp, LPC32XX_UARTCTL_CLOOP);
+}
+EXPORT_SYMBOL_GPL(lpc32xx_loopback_set);
+
void __init lpc32xx_serial_init(void)
{
u32 tmp, clkmodes = 0;
@@ -25,6 +25,8 @@
#include <linux/irq.h>
#include <linux/gpio.h>
#include <linux/of.h>
+#include <linux/sizes.h>
+#include <linux/soc/nxp/lpc32xx-misc.h>
/*
* High Speed UART register offsets
@@ -79,6 +81,8 @@
#define LPC32XX_HSU_TX_TL8B (0x2 << 0)
#define LPC32XX_HSU_TX_TL16B (0x3 << 0)
+#define LPC32XX_MAIN_OSC_FREQ 13000000
+
#define MODNAME "lpc32xx_hsuart"
struct lpc32xx_hsuart_port {
@@ -149,8 +153,6 @@ static void lpc32xx_hsuart_console_write(struct console *co, const char *s,
local_irq_restore(flags);
}
-static void lpc32xx_loopback_set(resource_size_t mapbase, int state);
-
static int __init lpc32xx_hsuart_console_setup(struct console *co,
char *options)
{
@@ -437,35 +439,6 @@ static void serial_lpc32xx_break_ctl(struct uart_port *port,
spin_unlock_irqrestore(&port->lock, flags);
}
-/* LPC3250 Errata HSUART.1: Hang workaround via loopback mode on inactivity */
-static void lpc32xx_loopback_set(resource_size_t mapbase, int state)
-{
- int bit;
- u32 tmp;
-
- switch (mapbase) {
- case LPC32XX_HS_UART1_BASE:
- bit = 0;
- break;
- case LPC32XX_HS_UART2_BASE:
- bit = 1;
- break;
- case LPC32XX_HS_UART7_BASE:
- bit = 6;
- break;
- default:
- WARN(1, "lpc32xx_hs: Warning: Unknown port at %08x\n", mapbase);
- return;
- }
-
- tmp = readl(LPC32XX_UARTCTL_CLOOP);
- if (state)
- tmp |= (1 << bit);
- else
- tmp &= ~(1 << bit);
- writel(tmp, LPC32XX_UARTCTL_CLOOP);
-}
-
/* port->lock is not held. */
static int serial_lpc32xx_startup(struct uart_port *port)
{
@@ -14,6 +14,7 @@
#ifdef CONFIG_ARCH_LPC32XX
extern u32 lpc32xx_return_iram(void __iomem **mapbase, dma_addr_t *dmaaddr);
extern void lpc32xx_set_phy_interface_mode(phy_interface_t mode);
+extern void lpc32xx_loopback_set(resource_size_t mapbase, int state);
#else
static inline u32 lpc32xx_return_iram(void __iomem **mapbase, dma_addr_t *dmaaddr)
{
@@ -24,6 +25,9 @@ static inline u32 lpc32xx_return_iram(void __iomem **mapbase, dma_addr_t *dmaadd
static inline void lpc32xx_set_phy_interface_mode(phy_interface_t mode)
{
}
+static inline void lpc32xx_loopback_set(resource_size_t mapbase, int state)
+{
+}
#endif
#endif /* __SOC_LPC32XX_MISC_H */
The lpc32xx_loopback_set() function in hte lpc32xx_hs driver is the one thing that relies on platform header files. Move that into the core platform code so we only need a variable declaration for it, and enable COMPILE_TEST building. Signed-off-by: Arnd Bergmann <arnd@arndb.de> --- arch/arm/mach-lpc32xx/serial.c | 30 ++++++++++++++++++++++++ drivers/tty/serial/lpc32xx_hs.c | 35 ++++------------------------ include/linux/soc/nxp/lpc32xx-misc.h | 4 ++++ 3 files changed, 38 insertions(+), 31 deletions(-)