diff mbox series

[v4,4/5] arm64: dts: keembay: Add device tree for Keem Bay SoC

Message ID 20200717090414.313530-5-daniele.alessandrelli@linux.intel.com (mailing list archive)
State Mainlined, archived
Headers show
Series Add initial Keem Bay SoC / Board support | expand

Commit Message

Daniele Alessandrelli July 17, 2020, 9:04 a.m. UTC
From: Daniele Alessandrelli <daniele.alessandrelli@intel.com>

Add initial device tree for Intel Movidius SoC code-named Keem Bay.

This initial DT includes nodes for Cortex-A53 cores, UARTs, GIC, PSCI,
and PMU.

Reviewed-by: Dinh Nguyen <dinguyen@kernel.org>
Signed-off-by: Daniele Alessandrelli <daniele.alessandrelli@intel.com>
---
 MAINTAINERS                                |   1 +
 arch/arm64/boot/dts/intel/keembay-soc.dtsi | 123 +++++++++++++++++++++
 2 files changed, 124 insertions(+)
 create mode 100644 arch/arm64/boot/dts/intel/keembay-soc.dtsi
diff mbox series

Patch

diff --git a/MAINTAINERS b/MAINTAINERS
index 3babb333b556..82ca9748fb70 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1959,6 +1959,7 @@  M:	Paul J. Murphy <paul.j.murphy@intel.com>
 M:	Daniele Alessandrelli <daniele.alessandrelli@intel.com>
 S:	Maintained
 F:	Documentation/devicetree/bindings/arm/intel,keembay.yaml
+F:	arch/arm64/boot/dts/intel/keembay-soc.dtsi
 
 ARM/INTEL RESEARCH IMOTE/STARGATE 2 MACHINE SUPPORT
 M:	Jonathan Cameron <jic23@cam.ac.uk>
diff --git a/arch/arm64/boot/dts/intel/keembay-soc.dtsi b/arch/arm64/boot/dts/intel/keembay-soc.dtsi
new file mode 100644
index 000000000000..781761d2942b
--- /dev/null
+++ b/arch/arm64/boot/dts/intel/keembay-soc.dtsi
@@ -0,0 +1,123 @@ 
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-3-Clause)
+/*
+ * Copyright (C) 2020, Intel Corporation.
+ *
+ * Device tree describing Keem Bay SoC.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			compatible = "arm,cortex-a53";
+			device_type = "cpu";
+			reg = <0x0>;
+			enable-method = "psci";
+		};
+
+		cpu@1 {
+			compatible = "arm,cortex-a53";
+			device_type = "cpu";
+			reg = <0x1>;
+			enable-method = "psci";
+		};
+
+		cpu@2 {
+			compatible = "arm,cortex-a53";
+			device_type = "cpu";
+			reg = <0x2>;
+			enable-method = "psci";
+		};
+
+		cpu@3 {
+			compatible = "arm,cortex-a53";
+			device_type = "cpu";
+			reg = <0x3>;
+			enable-method = "psci";
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	gic: interrupt-controller@20500000 {
+		compatible = "arm,gic-v3";
+		interrupt-controller;
+		#interrupt-cells = <3>;
+		reg = <0x0 0x20500000 0x0 0x20000>,	/* GICD */
+		      <0x0 0x20580000 0x0 0x80000>;	/* GICR */
+		/* VGIC maintenance interrupt */
+		interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		/* Secure, non-secure, virtual, and hypervisor */
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	pmu {
+		compatible = "arm,armv8-pmuv3";
+		interrupts = <GIC_PPI 0x7 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		uart0: serial@20150000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x0 0x20150000 0x0 0x100>;
+			interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
+			clock-frequency = <24000000>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			status = "disabled";
+		};
+
+		uart1: serial@20160000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x0 0x20160000 0x0 0x100>;
+			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
+			clock-frequency = <24000000>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			status = "disabled";
+		};
+
+		uart2: serial@20170000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x0 0x20170000 0x0 0x100>;
+			interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
+			clock-frequency = <24000000>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			status = "disabled";
+		};
+
+		uart3: serial@20180000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x0 0x20180000 0x0 0x100>;
+			interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+			clock-frequency = <24000000>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			status = "disabled";
+		};
+	};
+};