diff mbox series

[v4,2/3] sdhci: sparx5: Add Sparx5 SoC eMMC driver

Message ID 20200824151035.31093-3-lars.povlsen@microchip.com (mailing list archive)
State Superseded
Headers show
Series mmc: Adding support for Microchip Sparx5 SoC | expand

Commit Message

Lars Povlsen Aug. 24, 2020, 3:10 p.m. UTC
This adds the eMMC driver for the Sparx5 SoC. It is based upon the
designware IP, but requires some extra initialization and quirks.

Signed-off-by: Lars Povlsen <lars.povlsen@microchip.com>
---
 drivers/mmc/host/Kconfig           |  13 ++
 drivers/mmc/host/Makefile          |   1 +
 drivers/mmc/host/sdhci-of-sparx5.c | 269 +++++++++++++++++++++++++++++
 3 files changed, 283 insertions(+)
 create mode 100644 drivers/mmc/host/sdhci-of-sparx5.c

Comments

Adrian Hunter Aug. 24, 2020, 3:50 p.m. UTC | #1
On 24/08/20 6:10 pm, Lars Povlsen wrote:
> This adds the eMMC driver for the Sparx5 SoC. It is based upon the
> designware IP, but requires some extra initialization and quirks.
> 
> Signed-off-by: Lars Povlsen <lars.povlsen@microchip.com>

Already acked this, still:

Acked-by: Adrian Hunter <adrian.hunter@intel.com>

> ---
>  drivers/mmc/host/Kconfig           |  13 ++
>  drivers/mmc/host/Makefile          |   1 +
>  drivers/mmc/host/sdhci-of-sparx5.c | 269 +++++++++++++++++++++++++++++
>  3 files changed, 283 insertions(+)
>  create mode 100644 drivers/mmc/host/sdhci-of-sparx5.c
> 
> diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
> index 3b706af35ec31..a3bad4b4ed7ea 100644
> --- a/drivers/mmc/host/Kconfig
> +++ b/drivers/mmc/host/Kconfig
> @@ -213,6 +213,19 @@ config MMC_SDHCI_OF_DWCMSHC
>  	  If you have a controller with this interface, say Y or M here.
>  	  If unsure, say N.
>  
> +config MMC_SDHCI_OF_SPARX5
> +	tristate "SDHCI OF support for the MCHP Sparx5 SoC"
> +	depends on MMC_SDHCI_PLTFM
> +	depends on ARCH_SPARX5
> +	select MMC_SDHCI_IO_ACCESSORS
> +	help
> +	  This selects the Secure Digital Host Controller Interface (SDHCI)
> +	  found in the MCHP Sparx5 SoC.
> +
> +	  If you have a Sparx5 SoC with this interface, say Y or M here.
> +
> +	  If unsure, say N.
> +
>  config MMC_SDHCI_CADENCE
>  	tristate "SDHCI support for the Cadence SD/SDIO/eMMC controller"
>  	depends on MMC_SDHCI_PLTFM
> diff --git a/drivers/mmc/host/Makefile b/drivers/mmc/host/Makefile
> index 4d5bcb0144a0a..451c25fc2c692 100644
> --- a/drivers/mmc/host/Makefile
> +++ b/drivers/mmc/host/Makefile
> @@ -94,6 +94,7 @@ obj-$(CONFIG_MMC_SDHCI_OF_AT91)		+= sdhci-of-at91.o
>  obj-$(CONFIG_MMC_SDHCI_OF_ESDHC)	+= sdhci-of-esdhc.o
>  obj-$(CONFIG_MMC_SDHCI_OF_HLWD)		+= sdhci-of-hlwd.o
>  obj-$(CONFIG_MMC_SDHCI_OF_DWCMSHC)	+= sdhci-of-dwcmshc.o
> +obj-$(CONFIG_MMC_SDHCI_OF_SPARX5)	+= sdhci-of-sparx5.o
>  obj-$(CONFIG_MMC_SDHCI_BCM_KONA)	+= sdhci-bcm-kona.o
>  obj-$(CONFIG_MMC_SDHCI_IPROC)		+= sdhci-iproc.o
>  obj-$(CONFIG_MMC_SDHCI_MSM)		+= sdhci-msm.o
> diff --git a/drivers/mmc/host/sdhci-of-sparx5.c b/drivers/mmc/host/sdhci-of-sparx5.c
> new file mode 100644
> index 0000000000000..2b262c12e5530
> --- /dev/null
> +++ b/drivers/mmc/host/sdhci-of-sparx5.c
> @@ -0,0 +1,269 @@
> +// SPDX-License-Identifier: GPL-2.0-or-later
> +/*
> + * drivers/mmc/host/sdhci-of-sparx5.c
> + *
> + * MCHP Sparx5 SoC Secure Digital Host Controller Interface.
> + *
> + * Copyright (c) 2019 Microchip Inc.
> + *
> + * Author: Lars Povlsen <lars.povlsen@microchip.com>
> + */
> +
> +#include <linux/sizes.h>
> +#include <linux/delay.h>
> +#include <linux/module.h>
> +#include <linux/regmap.h>
> +#include <linux/of_device.h>
> +#include <linux/mfd/syscon.h>
> +#include <linux/dma-mapping.h>
> +
> +#include "sdhci-pltfm.h"
> +
> +#define CPU_REGS_GENERAL_CTRL	(0x22 * 4)
> +#define  MSHC_DLY_CC_MASK	GENMASK(16, 13)
> +#define  MSHC_DLY_CC_SHIFT	13
> +#define  MSHC_DLY_CC_MAX	15
> +
> +#define CPU_REGS_PROC_CTRL	(0x2C * 4)
> +#define  ACP_CACHE_FORCE_ENA	BIT(4)
> +#define  ACP_AWCACHE		BIT(3)
> +#define  ACP_ARCACHE		BIT(2)
> +#define  ACP_CACHE_MASK		(ACP_CACHE_FORCE_ENA|ACP_AWCACHE|ACP_ARCACHE)
> +
> +#define MSHC2_VERSION			0x500	/* Off 0x140, reg 0x0 */
> +#define MSHC2_TYPE			0x504	/* Off 0x140, reg 0x1 */
> +#define MSHC2_EMMC_CTRL			0x52c	/* Off 0x140, reg 0xB */
> +#define  MSHC2_EMMC_CTRL_EMMC_RST_N	BIT(2)
> +#define  MSHC2_EMMC_CTRL_IS_EMMC	BIT(0)
> +
> +struct sdhci_sparx5_data {
> +	struct sdhci_host *host;
> +	struct regmap *cpu_ctrl;
> +	int delay_clock;
> +};
> +
> +#define BOUNDARY_OK(addr, len) \
> +	((addr | (SZ_128M - 1)) == ((addr + len - 1) | (SZ_128M - 1)))
> +
> +/*
> + * If DMA addr spans 128MB boundary, we split the DMA transfer into two
> + * so that each DMA transfer doesn't exceed the boundary.
> + */
> +static void sdhci_sparx5_adma_write_desc(struct sdhci_host *host, void **desc,
> +					  dma_addr_t addr, int len,
> +					  unsigned int cmd)
> +{
> +	int tmplen, offset;
> +
> +	if (likely(!len || BOUNDARY_OK(addr, len))) {
> +		sdhci_adma_write_desc(host, desc, addr, len, cmd);
> +		return;
> +	}
> +
> +	pr_debug("%s: write_desc: splitting dma len %d, offset 0x%0llx\n",
> +		 mmc_hostname(host->mmc), len, addr);
> +
> +	offset = addr & (SZ_128M - 1);
> +	tmplen = SZ_128M - offset;
> +	sdhci_adma_write_desc(host, desc, addr, tmplen, cmd);
> +
> +	addr += tmplen;
> +	len -= tmplen;
> +	sdhci_adma_write_desc(host, desc, addr, len, cmd);
> +}
> +
> +static void sparx5_set_cacheable(struct sdhci_host *host, u32 value)
> +{
> +	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
> +	struct sdhci_sparx5_data *sdhci_sparx5 = sdhci_pltfm_priv(pltfm_host);
> +
> +	pr_debug("%s: Set Cacheable = 0x%x\n", mmc_hostname(host->mmc), value);
> +
> +	/* Update ACP caching attributes in HW */
> +	regmap_update_bits(sdhci_sparx5->cpu_ctrl,
> +			   CPU_REGS_PROC_CTRL, ACP_CACHE_MASK, value);
> +}
> +
> +static void sparx5_set_delay(struct sdhci_host *host, u8 value)
> +{
> +	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
> +	struct sdhci_sparx5_data *sdhci_sparx5 = sdhci_pltfm_priv(pltfm_host);
> +
> +	pr_debug("%s: Set DLY_CC = %u\n", mmc_hostname(host->mmc), value);
> +
> +	/* Update DLY_CC in HW */
> +	regmap_update_bits(sdhci_sparx5->cpu_ctrl,
> +			   CPU_REGS_GENERAL_CTRL,
> +			   MSHC_DLY_CC_MASK,
> +			   (value << MSHC_DLY_CC_SHIFT));
> +}
> +
> +static void sdhci_sparx5_set_emmc(struct sdhci_host *host)
> +{
> +	if (!mmc_card_is_removable(host->mmc)) {
> +		u8 value;
> +
> +		value = sdhci_readb(host, MSHC2_EMMC_CTRL);
> +		if (!(value & MSHC2_EMMC_CTRL_IS_EMMC)) {
> +			value |= MSHC2_EMMC_CTRL_IS_EMMC;
> +			pr_debug("%s: Set EMMC_CTRL: 0x%08x\n",
> +				 mmc_hostname(host->mmc), value);
> +			sdhci_writeb(host, value, MSHC2_EMMC_CTRL);
> +		}
> +	}
> +}
> +
> +static void sdhci_sparx5_reset_emmc(struct sdhci_host *host)
> +{
> +	u8 value;
> +
> +	pr_debug("%s: Toggle EMMC_CTRL.EMMC_RST_N\n", mmc_hostname(host->mmc));
> +	value = sdhci_readb(host, MSHC2_EMMC_CTRL) &
> +		~MSHC2_EMMC_CTRL_EMMC_RST_N;
> +	sdhci_writeb(host, value, MSHC2_EMMC_CTRL);
> +	/* For eMMC, minimum is 1us but give it 10us for good measure */
> +	usleep_range(10, 20);
> +	sdhci_writeb(host, value | MSHC2_EMMC_CTRL_EMMC_RST_N,
> +		     MSHC2_EMMC_CTRL);
> +	/* For eMMC, minimum is 200us but give it 300us for good measure */
> +	usleep_range(300, 400);
> +}
> +
> +static void sdhci_sparx5_reset(struct sdhci_host *host, u8 mask)
> +{
> +	pr_debug("%s: *** RESET: mask %d\n", mmc_hostname(host->mmc), mask);
> +
> +	sdhci_reset(host, mask);
> +
> +	/* Be sure CARD_IS_EMMC stays set */
> +	sdhci_sparx5_set_emmc(host);
> +}
> +
> +static const struct sdhci_ops sdhci_sparx5_ops = {
> +	.set_clock		= sdhci_set_clock,
> +	.set_bus_width		= sdhci_set_bus_width,
> +	.set_uhs_signaling	= sdhci_set_uhs_signaling,
> +	.get_max_clock		= sdhci_pltfm_clk_get_max_clock,
> +	.reset			= sdhci_sparx5_reset,
> +	.adma_write_desc	= sdhci_sparx5_adma_write_desc,
> +};
> +
> +static const struct sdhci_pltfm_data sdhci_sparx5_pdata = {
> +	.quirks  = 0,
> +	.quirks2 = SDHCI_QUIRK2_HOST_NO_CMD23 | /* Controller issue */
> +		   SDHCI_QUIRK2_NO_1_8_V, /* No sdr104, ddr50, etc */
> +	.ops = &sdhci_sparx5_ops,
> +};
> +
> +int sdhci_sparx5_probe(struct platform_device *pdev)
> +{
> +	int ret;
> +	const char *syscon = "microchip,sparx5-cpu-syscon";
> +	struct sdhci_host *host;
> +	struct sdhci_pltfm_host *pltfm_host;
> +	struct sdhci_sparx5_data *sdhci_sparx5;
> +	struct device_node *np = pdev->dev.of_node;
> +	u32 value;
> +	u32 extra;
> +
> +	host = sdhci_pltfm_init(pdev, &sdhci_sparx5_pdata,
> +				sizeof(*sdhci_sparx5));
> +
> +	if (IS_ERR(host))
> +		return PTR_ERR(host);
> +
> +	/*
> +	 * extra adma table cnt for cross 128M boundary handling.
> +	 */
> +	extra = DIV_ROUND_UP_ULL(dma_get_required_mask(&pdev->dev), SZ_128M);
> +	if (extra > SDHCI_MAX_SEGS)
> +		extra = SDHCI_MAX_SEGS;
> +	host->adma_table_cnt += extra;
> +
> +	pltfm_host = sdhci_priv(host);
> +	sdhci_sparx5 = sdhci_pltfm_priv(pltfm_host);
> +	sdhci_sparx5->host = host;
> +
> +	pltfm_host->clk = devm_clk_get(&pdev->dev, "core");
> +	if (IS_ERR(pltfm_host->clk)) {
> +		ret = PTR_ERR(pltfm_host->clk);
> +		dev_err(&pdev->dev, "failed to get core clk: %d\n", ret);
> +		goto free_pltfm;
> +	}
> +	ret = clk_prepare_enable(pltfm_host->clk);
> +	if (ret)
> +		goto free_pltfm;
> +
> +	if (!of_property_read_u32(np, "microchip,clock-delay", &value) &&
> +	    (value > 0 && value <= MSHC_DLY_CC_MAX))
> +		sdhci_sparx5->delay_clock = value;
> +
> +	sdhci_get_of_property(pdev);
> +
> +	ret = mmc_of_parse(host->mmc);
> +	if (ret)
> +		goto err_clk;
> +
> +	sdhci_sparx5->cpu_ctrl = syscon_regmap_lookup_by_compatible(syscon);
> +	if (IS_ERR(sdhci_sparx5->cpu_ctrl)) {
> +		dev_err(&pdev->dev, "No CPU syscon regmap !\n");
> +		ret = PTR_ERR(sdhci_sparx5->cpu_ctrl);
> +		goto err_clk;
> +	}
> +
> +	if (sdhci_sparx5->delay_clock >= 0)
> +		sparx5_set_delay(host, sdhci_sparx5->delay_clock);
> +
> +	if (!mmc_card_is_removable(host->mmc)) {
> +		/* Do a HW reset of eMMC card */
> +		sdhci_sparx5_reset_emmc(host);
> +		/* Update EMMC_CTRL */
> +		sdhci_sparx5_set_emmc(host);
> +		/* If eMMC, disable SD and SDIO */
> +		host->mmc->caps2 |= (MMC_CAP2_NO_SDIO|MMC_CAP2_NO_SD);
> +	}
> +
> +	ret = sdhci_add_host(host);
> +	if (ret)
> +		goto err_clk;
> +
> +	/* Set AXI bus master to use un-cached access (for DMA) */
> +	if (host->flags & (SDHCI_USE_SDMA | SDHCI_USE_ADMA) &&
> +	    IS_ENABLED(CONFIG_DMA_DECLARE_COHERENT))
> +		sparx5_set_cacheable(host, ACP_CACHE_FORCE_ENA);
> +
> +	pr_debug("%s: SDHC version: 0x%08x\n",
> +		 mmc_hostname(host->mmc), sdhci_readl(host, MSHC2_VERSION));
> +	pr_debug("%s: SDHC type:    0x%08x\n",
> +		 mmc_hostname(host->mmc), sdhci_readl(host, MSHC2_TYPE));
> +
> +	return ret;
> +
> +err_clk:
> +	clk_disable_unprepare(pltfm_host->clk);
> +free_pltfm:
> +	sdhci_pltfm_free(pdev);
> +	return ret;
> +}
> +
> +static const struct of_device_id sdhci_sparx5_of_match[] = {
> +	{ .compatible = "microchip,dw-sparx5-sdhci" },
> +	{ }
> +};
> +MODULE_DEVICE_TABLE(of, sdhci_sparx5_of_match);
> +
> +static struct platform_driver sdhci_sparx5_driver = {
> +	.driver = {
> +		.name = "sdhci-sparx5",
> +		.of_match_table = sdhci_sparx5_of_match,
> +		.pm = &sdhci_pltfm_pmops,
> +	},
> +	.probe = sdhci_sparx5_probe,
> +	.remove = sdhci_pltfm_unregister,
> +};
> +
> +module_platform_driver(sdhci_sparx5_driver);
> +
> +MODULE_DESCRIPTION("Sparx5 SDHCI OF driver");
> +MODULE_AUTHOR("Lars Povlsen <lars.povlsen@microchip.com>");
> +MODULE_LICENSE("GPL v2");
>
kernel test robot Aug. 24, 2020, 8:03 p.m. UTC | #2
Hi Lars,

I love your patch! Perhaps something to improve:

[auto build test WARNING on robh/for-next]
[also build test WARNING on linus/master v5.9-rc2 next-20200824]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch]

url:    https://github.com/0day-ci/linux/commits/Lars-Povlsen/mmc-Adding-support-for-Microchip-Sparx5-SoC/20200824-231355
base:   https://git.kernel.org/pub/scm/linux/kernel/git/robh/linux.git for-next
config: arm64-allyesconfig (attached as .config)
compiler: aarch64-linux-gcc (GCC) 9.3.0
reproduce (this is a W=1 build):
        wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
        chmod +x ~/bin/make.cross
        # save the attached .config to linux build tree
        COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-9.3.0 make.cross ARCH=arm64 

If you fix the issue, kindly add following tag as appropriate
Reported-by: kernel test robot <lkp@intel.com>

All warnings (new ones prefixed by >>):

>> drivers/mmc/host/sdhci-of-sparx5.c:158:5: warning: no previous prototype for 'sdhci_sparx5_probe' [-Wmissing-prototypes]
     158 | int sdhci_sparx5_probe(struct platform_device *pdev)
         |     ^~~~~~~~~~~~~~~~~~

# https://github.com/0day-ci/linux/commit/dd46278eff00cacc114d229429f51fbdbcb2e8f2
git remote add linux-review https://github.com/0day-ci/linux
git fetch --no-tags linux-review Lars-Povlsen/mmc-Adding-support-for-Microchip-Sparx5-SoC/20200824-231355
git checkout dd46278eff00cacc114d229429f51fbdbcb2e8f2
vim +/sdhci_sparx5_probe +158 drivers/mmc/host/sdhci-of-sparx5.c

   157	
 > 158	int sdhci_sparx5_probe(struct platform_device *pdev)
   159	{
   160		int ret;
   161		const char *syscon = "microchip,sparx5-cpu-syscon";
   162		struct sdhci_host *host;
   163		struct sdhci_pltfm_host *pltfm_host;
   164		struct sdhci_sparx5_data *sdhci_sparx5;
   165		struct device_node *np = pdev->dev.of_node;
   166		u32 value;
   167		u32 extra;
   168	
   169		host = sdhci_pltfm_init(pdev, &sdhci_sparx5_pdata,
   170					sizeof(*sdhci_sparx5));
   171	
   172		if (IS_ERR(host))
   173			return PTR_ERR(host);
   174	
   175		/*
   176		 * extra adma table cnt for cross 128M boundary handling.
   177		 */
   178		extra = DIV_ROUND_UP_ULL(dma_get_required_mask(&pdev->dev), SZ_128M);
   179		if (extra > SDHCI_MAX_SEGS)
   180			extra = SDHCI_MAX_SEGS;
   181		host->adma_table_cnt += extra;
   182	
   183		pltfm_host = sdhci_priv(host);
   184		sdhci_sparx5 = sdhci_pltfm_priv(pltfm_host);
   185		sdhci_sparx5->host = host;
   186	
   187		pltfm_host->clk = devm_clk_get(&pdev->dev, "core");
   188		if (IS_ERR(pltfm_host->clk)) {
   189			ret = PTR_ERR(pltfm_host->clk);
   190			dev_err(&pdev->dev, "failed to get core clk: %d\n", ret);
   191			goto free_pltfm;
   192		}
   193		ret = clk_prepare_enable(pltfm_host->clk);
   194		if (ret)
   195			goto free_pltfm;
   196	
   197		if (!of_property_read_u32(np, "microchip,clock-delay", &value) &&
   198		    (value > 0 && value <= MSHC_DLY_CC_MAX))
   199			sdhci_sparx5->delay_clock = value;
   200	
   201		sdhci_get_of_property(pdev);
   202	
   203		ret = mmc_of_parse(host->mmc);
   204		if (ret)
   205			goto err_clk;
   206	
   207		sdhci_sparx5->cpu_ctrl = syscon_regmap_lookup_by_compatible(syscon);
   208		if (IS_ERR(sdhci_sparx5->cpu_ctrl)) {
   209			dev_err(&pdev->dev, "No CPU syscon regmap !\n");
   210			ret = PTR_ERR(sdhci_sparx5->cpu_ctrl);
   211			goto err_clk;
   212		}
   213	
   214		if (sdhci_sparx5->delay_clock >= 0)
   215			sparx5_set_delay(host, sdhci_sparx5->delay_clock);
   216	
   217		if (!mmc_card_is_removable(host->mmc)) {
   218			/* Do a HW reset of eMMC card */
   219			sdhci_sparx5_reset_emmc(host);
   220			/* Update EMMC_CTRL */
   221			sdhci_sparx5_set_emmc(host);
   222			/* If eMMC, disable SD and SDIO */
   223			host->mmc->caps2 |= (MMC_CAP2_NO_SDIO|MMC_CAP2_NO_SD);
   224		}
   225	
   226		ret = sdhci_add_host(host);
   227		if (ret)
   228			goto err_clk;
   229	
   230		/* Set AXI bus master to use un-cached access (for DMA) */
   231		if (host->flags & (SDHCI_USE_SDMA | SDHCI_USE_ADMA) &&
   232		    IS_ENABLED(CONFIG_DMA_DECLARE_COHERENT))
   233			sparx5_set_cacheable(host, ACP_CACHE_FORCE_ENA);
   234	
   235		pr_debug("%s: SDHC version: 0x%08x\n",
   236			 mmc_hostname(host->mmc), sdhci_readl(host, MSHC2_VERSION));
   237		pr_debug("%s: SDHC type:    0x%08x\n",
   238			 mmc_hostname(host->mmc), sdhci_readl(host, MSHC2_TYPE));
   239	
   240		return ret;
   241	
   242	err_clk:
   243		clk_disable_unprepare(pltfm_host->clk);
   244	free_pltfm:
   245		sdhci_pltfm_free(pdev);
   246		return ret;
   247	}
   248	

---
0-DAY CI Kernel Test Service, Intel Corporation
https://lists.01.org/hyperkitty/list/kbuild-all@lists.01.org
diff mbox series

Patch

diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
index 3b706af35ec31..a3bad4b4ed7ea 100644
--- a/drivers/mmc/host/Kconfig
+++ b/drivers/mmc/host/Kconfig
@@ -213,6 +213,19 @@  config MMC_SDHCI_OF_DWCMSHC
 	  If you have a controller with this interface, say Y or M here.
 	  If unsure, say N.
 
+config MMC_SDHCI_OF_SPARX5
+	tristate "SDHCI OF support for the MCHP Sparx5 SoC"
+	depends on MMC_SDHCI_PLTFM
+	depends on ARCH_SPARX5
+	select MMC_SDHCI_IO_ACCESSORS
+	help
+	  This selects the Secure Digital Host Controller Interface (SDHCI)
+	  found in the MCHP Sparx5 SoC.
+
+	  If you have a Sparx5 SoC with this interface, say Y or M here.
+
+	  If unsure, say N.
+
 config MMC_SDHCI_CADENCE
 	tristate "SDHCI support for the Cadence SD/SDIO/eMMC controller"
 	depends on MMC_SDHCI_PLTFM
diff --git a/drivers/mmc/host/Makefile b/drivers/mmc/host/Makefile
index 4d5bcb0144a0a..451c25fc2c692 100644
--- a/drivers/mmc/host/Makefile
+++ b/drivers/mmc/host/Makefile
@@ -94,6 +94,7 @@  obj-$(CONFIG_MMC_SDHCI_OF_AT91)		+= sdhci-of-at91.o
 obj-$(CONFIG_MMC_SDHCI_OF_ESDHC)	+= sdhci-of-esdhc.o
 obj-$(CONFIG_MMC_SDHCI_OF_HLWD)		+= sdhci-of-hlwd.o
 obj-$(CONFIG_MMC_SDHCI_OF_DWCMSHC)	+= sdhci-of-dwcmshc.o
+obj-$(CONFIG_MMC_SDHCI_OF_SPARX5)	+= sdhci-of-sparx5.o
 obj-$(CONFIG_MMC_SDHCI_BCM_KONA)	+= sdhci-bcm-kona.o
 obj-$(CONFIG_MMC_SDHCI_IPROC)		+= sdhci-iproc.o
 obj-$(CONFIG_MMC_SDHCI_MSM)		+= sdhci-msm.o
diff --git a/drivers/mmc/host/sdhci-of-sparx5.c b/drivers/mmc/host/sdhci-of-sparx5.c
new file mode 100644
index 0000000000000..2b262c12e5530
--- /dev/null
+++ b/drivers/mmc/host/sdhci-of-sparx5.c
@@ -0,0 +1,269 @@ 
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * drivers/mmc/host/sdhci-of-sparx5.c
+ *
+ * MCHP Sparx5 SoC Secure Digital Host Controller Interface.
+ *
+ * Copyright (c) 2019 Microchip Inc.
+ *
+ * Author: Lars Povlsen <lars.povlsen@microchip.com>
+ */
+
+#include <linux/sizes.h>
+#include <linux/delay.h>
+#include <linux/module.h>
+#include <linux/regmap.h>
+#include <linux/of_device.h>
+#include <linux/mfd/syscon.h>
+#include <linux/dma-mapping.h>
+
+#include "sdhci-pltfm.h"
+
+#define CPU_REGS_GENERAL_CTRL	(0x22 * 4)
+#define  MSHC_DLY_CC_MASK	GENMASK(16, 13)
+#define  MSHC_DLY_CC_SHIFT	13
+#define  MSHC_DLY_CC_MAX	15
+
+#define CPU_REGS_PROC_CTRL	(0x2C * 4)
+#define  ACP_CACHE_FORCE_ENA	BIT(4)
+#define  ACP_AWCACHE		BIT(3)
+#define  ACP_ARCACHE		BIT(2)
+#define  ACP_CACHE_MASK		(ACP_CACHE_FORCE_ENA|ACP_AWCACHE|ACP_ARCACHE)
+
+#define MSHC2_VERSION			0x500	/* Off 0x140, reg 0x0 */
+#define MSHC2_TYPE			0x504	/* Off 0x140, reg 0x1 */
+#define MSHC2_EMMC_CTRL			0x52c	/* Off 0x140, reg 0xB */
+#define  MSHC2_EMMC_CTRL_EMMC_RST_N	BIT(2)
+#define  MSHC2_EMMC_CTRL_IS_EMMC	BIT(0)
+
+struct sdhci_sparx5_data {
+	struct sdhci_host *host;
+	struct regmap *cpu_ctrl;
+	int delay_clock;
+};
+
+#define BOUNDARY_OK(addr, len) \
+	((addr | (SZ_128M - 1)) == ((addr + len - 1) | (SZ_128M - 1)))
+
+/*
+ * If DMA addr spans 128MB boundary, we split the DMA transfer into two
+ * so that each DMA transfer doesn't exceed the boundary.
+ */
+static void sdhci_sparx5_adma_write_desc(struct sdhci_host *host, void **desc,
+					  dma_addr_t addr, int len,
+					  unsigned int cmd)
+{
+	int tmplen, offset;
+
+	if (likely(!len || BOUNDARY_OK(addr, len))) {
+		sdhci_adma_write_desc(host, desc, addr, len, cmd);
+		return;
+	}
+
+	pr_debug("%s: write_desc: splitting dma len %d, offset 0x%0llx\n",
+		 mmc_hostname(host->mmc), len, addr);
+
+	offset = addr & (SZ_128M - 1);
+	tmplen = SZ_128M - offset;
+	sdhci_adma_write_desc(host, desc, addr, tmplen, cmd);
+
+	addr += tmplen;
+	len -= tmplen;
+	sdhci_adma_write_desc(host, desc, addr, len, cmd);
+}
+
+static void sparx5_set_cacheable(struct sdhci_host *host, u32 value)
+{
+	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+	struct sdhci_sparx5_data *sdhci_sparx5 = sdhci_pltfm_priv(pltfm_host);
+
+	pr_debug("%s: Set Cacheable = 0x%x\n", mmc_hostname(host->mmc), value);
+
+	/* Update ACP caching attributes in HW */
+	regmap_update_bits(sdhci_sparx5->cpu_ctrl,
+			   CPU_REGS_PROC_CTRL, ACP_CACHE_MASK, value);
+}
+
+static void sparx5_set_delay(struct sdhci_host *host, u8 value)
+{
+	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+	struct sdhci_sparx5_data *sdhci_sparx5 = sdhci_pltfm_priv(pltfm_host);
+
+	pr_debug("%s: Set DLY_CC = %u\n", mmc_hostname(host->mmc), value);
+
+	/* Update DLY_CC in HW */
+	regmap_update_bits(sdhci_sparx5->cpu_ctrl,
+			   CPU_REGS_GENERAL_CTRL,
+			   MSHC_DLY_CC_MASK,
+			   (value << MSHC_DLY_CC_SHIFT));
+}
+
+static void sdhci_sparx5_set_emmc(struct sdhci_host *host)
+{
+	if (!mmc_card_is_removable(host->mmc)) {
+		u8 value;
+
+		value = sdhci_readb(host, MSHC2_EMMC_CTRL);
+		if (!(value & MSHC2_EMMC_CTRL_IS_EMMC)) {
+			value |= MSHC2_EMMC_CTRL_IS_EMMC;
+			pr_debug("%s: Set EMMC_CTRL: 0x%08x\n",
+				 mmc_hostname(host->mmc), value);
+			sdhci_writeb(host, value, MSHC2_EMMC_CTRL);
+		}
+	}
+}
+
+static void sdhci_sparx5_reset_emmc(struct sdhci_host *host)
+{
+	u8 value;
+
+	pr_debug("%s: Toggle EMMC_CTRL.EMMC_RST_N\n", mmc_hostname(host->mmc));
+	value = sdhci_readb(host, MSHC2_EMMC_CTRL) &
+		~MSHC2_EMMC_CTRL_EMMC_RST_N;
+	sdhci_writeb(host, value, MSHC2_EMMC_CTRL);
+	/* For eMMC, minimum is 1us but give it 10us for good measure */
+	usleep_range(10, 20);
+	sdhci_writeb(host, value | MSHC2_EMMC_CTRL_EMMC_RST_N,
+		     MSHC2_EMMC_CTRL);
+	/* For eMMC, minimum is 200us but give it 300us for good measure */
+	usleep_range(300, 400);
+}
+
+static void sdhci_sparx5_reset(struct sdhci_host *host, u8 mask)
+{
+	pr_debug("%s: *** RESET: mask %d\n", mmc_hostname(host->mmc), mask);
+
+	sdhci_reset(host, mask);
+
+	/* Be sure CARD_IS_EMMC stays set */
+	sdhci_sparx5_set_emmc(host);
+}
+
+static const struct sdhci_ops sdhci_sparx5_ops = {
+	.set_clock		= sdhci_set_clock,
+	.set_bus_width		= sdhci_set_bus_width,
+	.set_uhs_signaling	= sdhci_set_uhs_signaling,
+	.get_max_clock		= sdhci_pltfm_clk_get_max_clock,
+	.reset			= sdhci_sparx5_reset,
+	.adma_write_desc	= sdhci_sparx5_adma_write_desc,
+};
+
+static const struct sdhci_pltfm_data sdhci_sparx5_pdata = {
+	.quirks  = 0,
+	.quirks2 = SDHCI_QUIRK2_HOST_NO_CMD23 | /* Controller issue */
+		   SDHCI_QUIRK2_NO_1_8_V, /* No sdr104, ddr50, etc */
+	.ops = &sdhci_sparx5_ops,
+};
+
+int sdhci_sparx5_probe(struct platform_device *pdev)
+{
+	int ret;
+	const char *syscon = "microchip,sparx5-cpu-syscon";
+	struct sdhci_host *host;
+	struct sdhci_pltfm_host *pltfm_host;
+	struct sdhci_sparx5_data *sdhci_sparx5;
+	struct device_node *np = pdev->dev.of_node;
+	u32 value;
+	u32 extra;
+
+	host = sdhci_pltfm_init(pdev, &sdhci_sparx5_pdata,
+				sizeof(*sdhci_sparx5));
+
+	if (IS_ERR(host))
+		return PTR_ERR(host);
+
+	/*
+	 * extra adma table cnt for cross 128M boundary handling.
+	 */
+	extra = DIV_ROUND_UP_ULL(dma_get_required_mask(&pdev->dev), SZ_128M);
+	if (extra > SDHCI_MAX_SEGS)
+		extra = SDHCI_MAX_SEGS;
+	host->adma_table_cnt += extra;
+
+	pltfm_host = sdhci_priv(host);
+	sdhci_sparx5 = sdhci_pltfm_priv(pltfm_host);
+	sdhci_sparx5->host = host;
+
+	pltfm_host->clk = devm_clk_get(&pdev->dev, "core");
+	if (IS_ERR(pltfm_host->clk)) {
+		ret = PTR_ERR(pltfm_host->clk);
+		dev_err(&pdev->dev, "failed to get core clk: %d\n", ret);
+		goto free_pltfm;
+	}
+	ret = clk_prepare_enable(pltfm_host->clk);
+	if (ret)
+		goto free_pltfm;
+
+	if (!of_property_read_u32(np, "microchip,clock-delay", &value) &&
+	    (value > 0 && value <= MSHC_DLY_CC_MAX))
+		sdhci_sparx5->delay_clock = value;
+
+	sdhci_get_of_property(pdev);
+
+	ret = mmc_of_parse(host->mmc);
+	if (ret)
+		goto err_clk;
+
+	sdhci_sparx5->cpu_ctrl = syscon_regmap_lookup_by_compatible(syscon);
+	if (IS_ERR(sdhci_sparx5->cpu_ctrl)) {
+		dev_err(&pdev->dev, "No CPU syscon regmap !\n");
+		ret = PTR_ERR(sdhci_sparx5->cpu_ctrl);
+		goto err_clk;
+	}
+
+	if (sdhci_sparx5->delay_clock >= 0)
+		sparx5_set_delay(host, sdhci_sparx5->delay_clock);
+
+	if (!mmc_card_is_removable(host->mmc)) {
+		/* Do a HW reset of eMMC card */
+		sdhci_sparx5_reset_emmc(host);
+		/* Update EMMC_CTRL */
+		sdhci_sparx5_set_emmc(host);
+		/* If eMMC, disable SD and SDIO */
+		host->mmc->caps2 |= (MMC_CAP2_NO_SDIO|MMC_CAP2_NO_SD);
+	}
+
+	ret = sdhci_add_host(host);
+	if (ret)
+		goto err_clk;
+
+	/* Set AXI bus master to use un-cached access (for DMA) */
+	if (host->flags & (SDHCI_USE_SDMA | SDHCI_USE_ADMA) &&
+	    IS_ENABLED(CONFIG_DMA_DECLARE_COHERENT))
+		sparx5_set_cacheable(host, ACP_CACHE_FORCE_ENA);
+
+	pr_debug("%s: SDHC version: 0x%08x\n",
+		 mmc_hostname(host->mmc), sdhci_readl(host, MSHC2_VERSION));
+	pr_debug("%s: SDHC type:    0x%08x\n",
+		 mmc_hostname(host->mmc), sdhci_readl(host, MSHC2_TYPE));
+
+	return ret;
+
+err_clk:
+	clk_disable_unprepare(pltfm_host->clk);
+free_pltfm:
+	sdhci_pltfm_free(pdev);
+	return ret;
+}
+
+static const struct of_device_id sdhci_sparx5_of_match[] = {
+	{ .compatible = "microchip,dw-sparx5-sdhci" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, sdhci_sparx5_of_match);
+
+static struct platform_driver sdhci_sparx5_driver = {
+	.driver = {
+		.name = "sdhci-sparx5",
+		.of_match_table = sdhci_sparx5_of_match,
+		.pm = &sdhci_pltfm_pmops,
+	},
+	.probe = sdhci_sparx5_probe,
+	.remove = sdhci_pltfm_unregister,
+};
+
+module_platform_driver(sdhci_sparx5_driver);
+
+MODULE_DESCRIPTION("Sparx5 SDHCI OF driver");
+MODULE_AUTHOR("Lars Povlsen <lars.povlsen@microchip.com>");
+MODULE_LICENSE("GPL v2");