mbox series

[GIT,PULL] arm64: TI K3 DT updates for v5.10

Message ID 20200922134722.2y5kqxu4lghbwp5u@akan (mailing list archive)
State Accepted
Commit 5310d705a934fdb6565824ab91a7be07c290ef47
Headers show
Series [GIT,PULL] arm64: TI K3 DT updates for v5.10 | expand

Pull-request

git://git.kernel.org/pub/scm/linux/kernel/git/nmenon/linux.git tags/ti-k3-dt-for-v5.10

Message

Nishanth Menon Sept. 22, 2020, 1:47 p.m. UTC
Hi,

Please pull the following for 5.10 cycle (had to base on 5.9-rc3 due to
a bad dependency):
	- dts fixups for dtbs_check and W=2 build of dtbs, node names.
	- am654 adds crypto nodes and an erratum workaround for PCIe(down to Gen2)
	- j721e adds C66, C71 DSP and PCIe nodes

The following changes since commit f75aef392f869018f78cfedf3c320a6b3fcfda6b:

  Linux 5.9-rc3 (2020-08-30 16:01:54 -0700)

are available in the Git repository at:

  git://git.kernel.org/pub/scm/linux/kernel/git/nmenon/linux.git tags/ti-k3-dt-for-v5.10

for you to fetch changes up to 66db854b1f62dbee48ec7373f149fa30e4b3dd4e:

  arm64: dts: ti: k3-j721e-common-proc-board: Configure the PCIe instances (2020-09-22 08:19:47 -0500)

----------------------------------------------------------------
Device tree updates towards 5.10-rc1 for TI K3 platform.

----------------------------------------------------------------
Keerthy (2):
      arm64: dts: ti: k3-am6: Add crypto accelarator node
      arm64: dts: ti: k3-j721e-main: Add crypto accelerator node

Kishon Vijay Abraham I (2):
      arm64: dts: ti: k3-j721e-main: Add PCIe device tree nodes
      arm64: dts: ti: k3-j721e-common-proc-board: Configure the PCIe instances

Nishanth Menon (8):
      arm64: dts: ti: k3-j721e: Use lower case hexadecimal
      arm64: dts: ti: k3-am65-main: Use lower case hexadecimal
      arm64: dts: ti: k3-am65*: Use generic gpio for node names
      arm64: dts: ti: k3-am65*: Use generic clock for syscon clock names
      arm64: dts: ti: k3-*: Use generic pinctrl for node names
      arm64: dts: ti: k3-am65-base-board Use generic camera for node name instead of ov5640
      arm64: dts: ti: k3-am65-wakeup: Use generic temperature-sensor for node name
      arm64: dts: ti: k3-*: Fix up node_name_chars_strict warnings

Sekhar Nori (1):
      arm64: dts: ti: k3-am65: restrict PCIe to Gen2 speed

Suman Anna (10):
      arm64: dts: ti: k3-am65: Fix interconnect node names
      arm64: dts: ti: k3-j721e: Fix interconnect node names
      arm64: dts: ti: k3-j721e-som-p0: Move mailbox nodes from board dts file
      arm64: dts: ti: k3-j721e-main: Add C66x DSP nodes
      arm64: dts: ti: k3-j721e-som-p0: Add mailboxes to C66x DSPs
      arm64: dts: ti: k3-j721e-som-p0: Add DDR carveout memory nodes for C66 DSPs
      arm64: dts: ti: k3-j721e-main: Add C71x DSP node
      arm64: dts: ti: k3-j721e-som-p0: Add mailboxes to C71x DSP
      arm64: dts: ti: k3-j721e-som-p0: Add DDR carveout memory nodes for C71x DSP
      arm64: dts: ti: k3-j721e-som-p0: Reserve memory for IPC between RTOS cores

 arch/arm64/boot/dts/ti/k3-am65-main.dtsi           |  52 +++-
 arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi            |   4 +-
 arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi         |   6 +-
 arch/arm64/boot/dts/ti/k3-am65.dtsi                |   6 +-
 arch/arm64/boot/dts/ti/k3-am654-base-board.dts     |  18 +-
 .../boot/dts/ti/k3-am654-industrial-thermal.dtsi   |  12 +-
 .../boot/dts/ti/k3-j721e-common-proc-board.dts     | 191 ++++++-------
 arch/arm64/boot/dts/ti/k3-j721e-main.dtsi          | 301 ++++++++++++++++++++-
 arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi    |   4 +-
 arch/arm64/boot/dts/ti/k3-j721e-som-p0.dtsi        | 155 ++++++++++-
 arch/arm64/boot/dts/ti/k3-j721e.dtsi               |  11 +-
 11 files changed, 608 insertions(+), 152 deletions(-)