diff mbox series

[v4,4/5] ARM: mstar: Add gpio controller to MStar base dtsi

Message ID 20201129110803.2461700-5-daniel@0x0f.com (mailing list archive)
State Queued, archived
Headers show
Series Add GPIO support for MStar/SigmaStar ARMv7 | expand

Commit Message

Daniel Palmer Nov. 29, 2020, 11:08 a.m. UTC
The GPIO controller is at the same address in all of the
currently known chips so create a node for it in the base
dtsi.

Some extra properties are needed to actually use it so
disable it by default.

Signed-off-by: Daniel Palmer <daniel@0x0f.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
---
 arch/arm/boot/dts/mstar-v7.dtsi | 10 ++++++++++
 1 file changed, 10 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/mstar-v7.dtsi b/arch/arm/boot/dts/mstar-v7.dtsi
index f07880561e11..81369bc07f78 100644
--- a/arch/arm/boot/dts/mstar-v7.dtsi
+++ b/arch/arm/boot/dts/mstar-v7.dtsi
@@ -109,6 +109,16 @@  l3bridge: l3bridge@204400 {
 				reg = <0x204400 0x200>;
 			};
 
+			gpio: gpio@207800 {
+				#gpio-cells = <2>;
+				reg = <0x207800 0x200>;
+				gpio-controller;
+				#interrupt-cells = <2>;
+				interrupt-controller;
+				interrupt-parent = <&intc_fiq>;
+				status = "disabled";
+			};
+
 			pm_uart: uart@221000 {
 				compatible = "ns16550a";
 				reg = <0x221000 0x100>;