mbox series

[GIT,PULL] arm64: TI K3 DT updates for v5.11

Message ID 20201130174258.ljsiokkyr7x7tsbd@covenant (mailing list archive)
State Accepted
Commit e40917e4664e490d5f5b7a4cbd83ee9f46d27113
Headers show
Series [GIT,PULL] arm64: TI K3 DT updates for v5.11 | expand

Pull-request

git://git.kernel.org/pub/scm/linux/kernel/git/nmenon/linux.git tags/ti-k3-dt-for-v5.11

Message

Nishanth Menon Nov. 30, 2020, 5:42 p.m. UTC
Hi,

Please pull the following for TI K3 dts changes for v5.11 window.

The following changes since commit 3650b228f83adda7e5ee532e2b90429c03f7b9ec:

  Linux 5.10-rc1 (2020-10-25 15:14:11 -0700)

are available in the Git repository at:

  git://git.kernel.org/pub/scm/linux/kernel/git/nmenon/linux.git tags/ti-k3-dt-for-v5.11

for you to fetch changes up to cd48ce86a4d0c1ffec86aa46a26da993c9af5f53:

  arm64: dts: ti: k3-j721e-common-proc-board: Add support for SD card UHS modes (2020-11-30 07:12:54 -0600)

----------------------------------------------------------------
Devicetree changes for TI K3 platforms for v5.11 merge window:

- Standardized usage of "disabled" only in board.dts files, #interrupt-cells warning fixups, node format error fixes

- J721E: R5F support, MMC/SD UHS mode added

- AM654: R5F support, dss marked coherent, drop unused dma-ring-reset-quirk property

- J7200: ADC support, Mailbox, hwspinlock

----------------------------------------------------------------
Faiz Abbas (2):
      arm64: dts: ti: k3-j721e-main: Add output tap delay values
      arm64: dts: ti: k3-j721e-common-proc-board: Add support for SD card UHS modes

Grygorii Strashko (1):
      arm64: dts: ti: k3-am65: ringacc: drop ti, dma-ring-reset-quirk

Nishanth Menon (6):
      arm64: dts: ti: k3-am65*/j721e*: Fix unit address format error for dss node
      arm64: dts: ti: k3-am65*: Cleanup disabled nodes at SoC dtsi level
      arm64: dts: ti: k3-j721e*: Cleanup disabled nodes at SoC dtsi level
      arm64: dts: ti: am65/j721e: Fix up un-necessary status set to "okay" for crypto
      arm64: dts: ti: k3-am654-base-board: Fix up un-necessary status set to "okay" for USB
      arm64: dts: ti: am65/j721e/j7200: Mark firmware used uart as "reserved"

Peter Ujfalusi (2):
      arm64: dts: ti: k3-j7200-som-p0: main_i2c0 have an ioexpander on the SOM
      arm64: dts: ti: k3-j7200-common-proc-board: Correct the name of io expander on main_i2c1

Sekhar Nori (1):
      arm64: dts: ti: k3: squelch warning about lack of #interrupt-cells

Suman Anna (11):
      arm64: dts: ti: k3-am65-mcu: Add MCU domain R5F cluster node
      arm64: dts: ti: k3-am654-base-board: Add mailboxes to R5Fs
      arm64: dts: ti: k3-am654-base-board: Add DDR carveout memory nodes for R5Fs
      arm64: dts: ti: k3-am654-base-board: Reserve memory for IPC between R5F cores
      arm64: dts: ti: k3-j721e-mcu: Add MCU domain R5F cluster node
      arm64: dts: ti: k3-j721e-main: Add MAIN domain R5F cluster nodes
      arm64: dts: ti: k3-j721e-som-p0: Add mailboxes to R5Fs
      arm64: dts: ti: k3-j721e-som-p0: Add DDR carveout memory nodes for R5Fs
      arm64: dts: ti: k3-j7200-main: Add hwspinlock node
      arm64: dts: ti: k3-j7200-main: Add mailbox cluster nodes
      arm64: dts: ti: k3-j7200-som-p0: Add IPC sub-mailbox nodes

Tomi Valkeinen (1):
      arm64: dts: ti: k3-am65: mark dss as dma-coherent

Vignesh Raghavendra (1):
      arm64: dts: ti: k3-j7200-mcu-wakeup: Enable ADC support

 arch/arm64/boot/dts/ti/k3-am65-main.dtsi           |  13 +-
 arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi            |  43 ++++++-
 arch/arm64/boot/dts/ti/k3-am654-base-board.dts     |  71 +++++++++--
 .../boot/dts/ti/k3-j7200-common-proc-board.dts     |  33 ++---
 arch/arm64/boot/dts/ti/k3-j7200-main.dtsi          | 114 +++++++++++++++++
 arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi    |  19 +++
 arch/arm64/boot/dts/ti/k3-j7200-som-p0.dtsi        |  94 ++++++++++++++
 .../boot/dts/ti/k3-j721e-common-proc-board.dts     |  83 ++++++++++++-
 arch/arm64/boot/dts/ti/k3-j721e-main.dtsi          | 135 +++++++++++++++------
 arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi    |  42 ++++++-
 arch/arm64/boot/dts/ti/k3-j721e-som-p0.dtsi        | 110 ++++++++++++++++-
 11 files changed, 682 insertions(+), 75 deletions(-)

Comments

Arnd Bergmann Dec. 8, 2020, 11:09 p.m. UTC | #1
From: Arnd Bergmann <arnd@arndb.de>

On Mon, 30 Nov 2020 11:42:58 -0600, Nishanth Menon wrote:
> Please pull the following for TI K3 dts changes for v5.11 window.
> 
> The following changes since commit 3650b228f83adda7e5ee532e2b90429c03f7b9ec:
> 
>   Linux 5.10-rc1 (2020-10-25 15:14:11 -0700)
> 
> are available in the Git repository at:
> 
> [...]

Merged into arm/dt, thanks!

merge commit: e40917e4664e490d5f5b7a4cbd83ee9f46d27113

       Arnd
patchwork-bot+linux-soc@kernel.org Dec. 8, 2020, 11:50 p.m. UTC | #2
Hello:

This pull request was applied to soc/soc.git (refs/heads/for-next):

On Mon, 30 Nov 2020 11:42:58 -0600 you wrote:
> Hi,
> 
> Please pull the following for TI K3 dts changes for v5.11 window.
> 
> The following changes since commit 3650b228f83adda7e5ee532e2b90429c03f7b9ec:
> 
>   Linux 5.10-rc1 (2020-10-25 15:14:11 -0700)
> 
> [...]

Here is the summary with links:
  - [GIT,PULL] arm64: TI K3 DT updates for v5.11
    https://git.kernel.org/soc/soc/c/e40917e4664e

You are awesome, thank you!
--
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html