deleted file mode 100644
deleted file mode 100644
deleted file mode 100644
@@ -19,7 +19,6 @@ select:
contains:
enum:
- arm,pl011
- - zte,zx296702-uart
required:
- compatible
@@ -30,7 +29,6 @@ properties:
- const: arm,pl011
- const: arm,primecell
- items:
- - const: zte,zx296702-uart
- const: arm,primecell
reg:
deleted file mode 100644
@@ -2704,40 +2704,6 @@ S: Maintained
F: arch/arm/mach-pxa/include/mach/z2.h
F: arch/arm/mach-pxa/z2.c
-ARM/ZTE ARCHITECTURE
-M: Jun Nie <jun.nie@linaro.org>
-M: Shawn Guo <shawnguo@kernel.org>
-L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
-S: Maintained
-F: Documentation/devicetree/bindings/arm/zte.yaml
-F: Documentation/devicetree/bindings/clock/zx2967*.txt
-F: Documentation/devicetree/bindings/dma/zxdma.txt
-F: Documentation/devicetree/bindings/gpio/zx296702-gpio.txt
-F: Documentation/devicetree/bindings/i2c/i2c-zx2967.txt
-F: Documentation/devicetree/bindings/mmc/zx-dw-mshc.txt
-F: Documentation/devicetree/bindings/pinctrl/pinctrl-zx.txt
-F: Documentation/devicetree/bindings/reset/zte,zx2967-reset.txt
-F: Documentation/devicetree/bindings/soc/zte/
-F: Documentation/devicetree/bindings/sound/zte,*.txt
-F: Documentation/devicetree/bindings/thermal/zx2967-thermal.txt
-F: Documentation/devicetree/bindings/watchdog/zte,zx2967-wdt.txt
-F: arch/arm/boot/dts/zx2967*
-F: arch/arm/mach-zx/
-F: arch/arm64/boot/dts/zte/
-F: drivers/clk/zte/
-F: drivers/dma/zx_dma.c
-F: drivers/gpio/gpio-zx.c
-F: drivers/i2c/busses/i2c-zx2967.c
-F: drivers/mmc/host/dw_mmc-zx.*
-F: drivers/pinctrl/zte/
-F: drivers/soc/zte/
-F: drivers/thermal/zx2967_thermal.c
-F: drivers/watchdog/zx2967_wdt.c
-F: include/dt-bindings/clock/zx2967*.h
-F: include/dt-bindings/soc/zte,*.h
-F: sound/soc/codecs/zx_aud96p22.c
-F: sound/soc/zte/
-
ARM/ZYNQ ARCHITECTURE
M: Michal Simek <michal.simek@xilinx.com>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
@@ -6029,14 +5995,6 @@ T: git git://anongit.freedesktop.org/drm/drm-misc
F: Documentation/devicetree/bindings/display/xlnx/
F: drivers/gpu/drm/xlnx/
-DRM DRIVERS FOR ZTE ZX
-M: Shawn Guo <shawnguo@kernel.org>
-L: dri-devel@lists.freedesktop.org
-S: Maintained
-T: git git://anongit.freedesktop.org/drm/drm-misc
-F: Documentation/devicetree/bindings/display/zte,vou.txt
-F: drivers/gpu/drm/zte/
-
DRM PANEL DRIVERS
M: Thierry Reding <thierry.reding@gmail.com>
R: Sam Ravnborg <sam@ravnborg.org>
@@ -718,8 +718,6 @@ source "arch/arm/mach-vexpress/Kconfig"
source "arch/arm/mach-vt8500/Kconfig"
-source "arch/arm/mach-zx/Kconfig"
-
source "arch/arm/mach-zynq/Kconfig"
# ARMv7-M architecture
@@ -1353,18 +1353,6 @@ choice
This option selects UART0 on VIA/Wondermedia System-on-a-chip
devices, including VT8500, WM8505, WM8650 and WM8850.
- config DEBUG_ZTE_ZX
- bool "Use ZTE ZX UART"
- select DEBUG_UART_PL01X
- depends on ARCH_ZX
- help
- Say Y here if you are enabling ZTE ZX296702 SOC and need
- debug uart support.
-
- This option is preferred over the platform specific
- options; the platform specific options are deprecated
- and will be soon removed.
-
config DEBUG_ZYNQ_UART0
bool "Kernel low-level debugging on Xilinx Zynq using UART0"
depends on ARCH_ZYNQ
@@ -1599,7 +1587,6 @@ config DEBUG_UART_PHYS
default 0x02531000 if DEBUG_KEYSTONE_UART1
default 0x03010fe0 if ARCH_RPC
default 0x07000000 if DEBUG_SUN9I_UART0
- default 0x09405000 if DEBUG_ZTE_ZX
default 0x10009000 if DEBUG_REALVIEW_STD_PORT || \
DEBUG_VEXPRESS_UART0_CA9
default 0x1010c000 if DEBUG_REALVIEW_PB1176_PORT
@@ -1782,7 +1769,6 @@ config DEBUG_UART_VIRT
default 0xfb020000 if DEBUG_OMAP3UART3
default 0xfb042000 if DEBUG_OMAP3UART4
default 0xfb10c000 if DEBUG_REALVIEW_PB1176_PORT
- default 0xfc705000 if DEBUG_ZTE_ZX
default 0xfcfe8600 if DEBUG_BCM63XX_UART
default 0xfd000000 if DEBUG_SPEAR3XX || DEBUG_SPEAR13XX
default 0xfd883000 if DEBUG_ALPINE_UART0
@@ -220,7 +220,6 @@ machine-$(CONFIG_ARCH_U8500) += ux500
machine-$(CONFIG_ARCH_VERSATILE) += versatile
machine-$(CONFIG_ARCH_VEXPRESS) += vexpress
machine-$(CONFIG_ARCH_VT8500) += vt8500
-machine-$(CONFIG_ARCH_ZX) += zx
machine-$(CONFIG_ARCH_ZYNQ) += zynq
machine-$(CONFIG_PLAT_SPEAR) += spear
@@ -1387,7 +1387,6 @@ dtb-$(CONFIG_ARCH_MSTARV7) += \
mstar-infinity2m-ssd202d-ssd201htv2.dtb \
mstar-infinity3-msc313e-breadbee.dtb \
mstar-mercury5-ssc8336n-midrived08.dtb
-dtb-$(CONFIG_ARCH_ZX) += zx296702-ad1.dtb
dtb-$(CONFIG_ARCH_ASPEED) += \
aspeed-ast2500-evb.dtb \
aspeed-ast2600-evb.dtb \
deleted file mode 100644
deleted file mode 100644
deleted file mode 100644
deleted file mode 100644
deleted file mode 100644
deleted file mode 100644
deleted file mode 100644
deleted file mode 100644
deleted file mode 100644
deleted file mode 100644
@@ -317,12 +317,6 @@ config ARCH_XGENE
help
This enables support for AppliedMicro X-Gene SOC Family
-config ARCH_ZX
- bool "ZTE ZX SoC Family"
- select PINCTRL
- help
- This enables support for ZTE ZX SoC Family
-
config ARCH_ZYNQMP
bool "Xilinx ZynqMP Family"
help
@@ -29,4 +29,3 @@ subdir-y += synaptics
subdir-y += ti
subdir-y += toshiba
subdir-y += xilinx
-subdir-y += zte
deleted file mode 100644
deleted file mode 100644
deleted file mode 100644
deleted file mode 100644
@@ -173,7 +173,7 @@ config RESET_SCMI
config RESET_SIMPLE
bool "Simple Reset Controller Driver" if COMPILE_TEST
- default ARCH_AGILEX || ARCH_ASPEED || ARCH_BITMAIN || ARCH_REALTEK || ARCH_STM32 || ARCH_STRATIX10 || ARCH_SUNXI || ARCH_ZX || ARC
+ default ARCH_AGILEX || ARCH_ASPEED || ARCH_BITMAIN || ARCH_REALTEK || ARCH_STM32 || ARCH_STRATIX10 || ARCH_SUNXI || ARC
help
This enables a simple reset controller driver for reset lines that
that can be asserted and deasserted by toggling bits in a contiguous,
@@ -22,7 +22,6 @@ source "drivers/soc/ti/Kconfig"
source "drivers/soc/ux500/Kconfig"
source "drivers/soc/versatile/Kconfig"
source "drivers/soc/xilinx/Kconfig"
-source "drivers/soc/zte/Kconfig"
source "drivers/soc/kendryte/Kconfig"
endmenu
@@ -28,5 +28,4 @@ obj-y += ti/
obj-$(CONFIG_ARCH_U8500) += ux500/
obj-$(CONFIG_PLAT_VERSATILE) += versatile/
obj-y += xilinx/
-obj-$(CONFIG_ARCH_ZX) += zte/
obj-$(CONFIG_SOC_KENDRYTE) += kendryte/
deleted file mode 100644
deleted file mode 100644
deleted file mode 100644
deleted file mode 100644
deleted file mode 100644