| Message ID | 20220428214838.1040278-10-Mr.Bossman075@gmail.com (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | Add support for the i.MXRT1170-evk | expand |
On 22-04-28 17:48:32, Jesse Taube wrote: > The i.MXRT1170 has a pll that has the multiplier bits inverted and > cannot be changed add IMX_PLLV3_GENERICV2. > Drop the "ARM:" from the subject line. It is confusing reviewers. This is a clocks patch. Has nothing to do with arch/arm subsystem. > The i.MXRT1170 also has the lock bit moved as well as the > power bit inverted the power bit also is in different locations on each > pll control register. > > Signed-off-by: Jesse Taube <Mr.Bossman075@gmail.com> > --- > V1 -> V2: > - Nothing done > --- > drivers/clk/imx/clk-pllv3.c | 57 +++++++++++++++++++++++++++++++++++-- > drivers/clk/imx/clk.h | 4 +++ > 2 files changed, 59 insertions(+), 2 deletions(-) > > diff --git a/drivers/clk/imx/clk-pllv3.c b/drivers/clk/imx/clk-pllv3.c > index 20ee9611ba6e..a1dbc3a2e280 100644 > --- a/drivers/clk/imx/clk-pllv3.c > +++ b/drivers/clk/imx/clk-pllv3.c > @@ -23,6 +23,7 @@ > > #define BM_PLL_POWER (0x1 << 12) > #define BM_PLL_LOCK (0x1 << 31) > +#define BM_PLL_LOCK_V2 (0x1 << 29) > #define IMX7_ENET_PLL_POWER (0x1 << 5) > #define IMX7_DDR_PLL_POWER (0x1 << 20) > > @@ -34,6 +35,7 @@ > * @base: base address of PLL registers > * @power_bit: pll power bit mask > * @powerup_set: set power_bit to power up the PLL > + * @lock_bit: pll lock bit mask > * @div_mask: mask of divider bits > * @div_shift: shift of divider bits > * @ref_clock: reference clock rate > @@ -48,6 +50,7 @@ struct clk_pllv3 { > void __iomem *base; > u32 power_bit; > bool powerup_set; > + u32 lock_bit; > u32 div_mask; > u32 div_shift; > unsigned long ref_clock; > @@ -65,7 +68,7 @@ static int clk_pllv3_wait_lock(struct clk_pllv3 *pll) > if ((pll->powerup_set && !val) || (!pll->powerup_set && val)) > return 0; > > - return readl_relaxed_poll_timeout(pll->base, val, val & BM_PLL_LOCK, > + return readl_relaxed_poll_timeout(pll->base, val, val & pll->lock_bit, > 500, PLL_LOCK_TIMEOUT); > } > > @@ -101,7 +104,7 @@ static int clk_pllv3_is_prepared(struct clk_hw *hw) > { > struct clk_pllv3 *pll = to_clk_pllv3(hw); > > - if (readl_relaxed(pll->base) & BM_PLL_LOCK) > + if (readl_relaxed(pll->base) & pll->lock_bit) > return 1; > > return 0; > @@ -155,6 +158,39 @@ static const struct clk_ops clk_pllv3_ops = { > .set_rate = clk_pllv3_set_rate, > }; > > +static int clk_pllv3_genericv2_set_rate(struct clk_hw *hw, unsigned long rate, > + unsigned long parent_rate) > +{ > + struct clk_pllv3 *pll = to_clk_pllv3(hw); > + u32 val, div; > + > + div = (readl_relaxed(pll->base) >> pll->div_shift) & pll->div_mask; > + val = (div == 0) ? parent_rate * 22 : parent_rate * 20; > + > + if (rate == val) > + return 0; > + > + return -EINVAL; > +} > + > +static unsigned long clk_pllv3_genericv2_recalc_rate(struct clk_hw *hw, > + unsigned long parent_rate) > +{ > + struct clk_pllv3 *pll = to_clk_pllv3(hw); > + u32 div = (readl_relaxed(pll->base) >> pll->div_shift) & pll->div_mask; > + > + return (div == 0) ? parent_rate * 22 : parent_rate * 20; > +} > + > +static const struct clk_ops clk_pllv3_genericv2_ops = { > + .prepare = clk_pllv3_prepare, > + .unprepare = clk_pllv3_unprepare, > + .is_prepared = clk_pllv3_is_prepared, > + .recalc_rate = clk_pllv3_genericv2_recalc_rate, > + .round_rate = clk_pllv3_round_rate, > + .set_rate = clk_pllv3_genericv2_set_rate, > +}; > + > static unsigned long clk_pllv3_sys_recalc_rate(struct clk_hw *hw, > unsigned long parent_rate) > { > @@ -407,6 +443,13 @@ static const struct clk_ops clk_pllv3_enet_ops = { > .recalc_rate = clk_pllv3_enet_recalc_rate, > }; > > +void imx_clk_hw_pll3_powerbit(struct clk_hw *hw, u8 shift) > +{ > + struct clk_pllv3 *pll = to_clk_pllv3(hw); > + > + pll->power_bit = shift; > +} > + > struct clk_hw *imx_clk_hw_pllv3(enum imx_pllv3_type type, const char *name, > const char *parent_name, void __iomem *base, > u32 div_mask) > @@ -422,10 +465,20 @@ struct clk_hw *imx_clk_hw_pllv3(enum imx_pllv3_type type, const char *name, > return ERR_PTR(-ENOMEM); > > pll->power_bit = BM_PLL_POWER; > + pll->lock_bit = BM_PLL_LOCK; > pll->num_offset = PLL_NUM_OFFSET; > pll->denom_offset = PLL_DENOM_OFFSET; > > switch (type) { > + case IMX_PLLV3_GENERICV2: > + pll->lock_bit = BM_PLL_LOCK_V2; > + pll->powerup_set = true; > + ops = &clk_pllv3_genericv2_ops; > + break; > + case IMX_PLLV3_SYSV2: > + pll->lock_bit = BM_PLL_LOCK_V2; > + pll->powerup_set = true; > + fallthrough; > case IMX_PLLV3_SYS: > ops = &clk_pllv3_sys_ops; > break; > diff --git a/drivers/clk/imx/clk.h b/drivers/clk/imx/clk.h > index 7d220a01de1f..e70e985840a4 100644 > --- a/drivers/clk/imx/clk.h > +++ b/drivers/clk/imx/clk.h > @@ -220,6 +220,8 @@ struct clk_hw *imx_clk_hw_sscg_pll(const char *name, > > enum imx_pllv3_type { > IMX_PLLV3_GENERIC, > + IMX_PLLV3_GENERICV2, > + IMX_PLLV3_SYSV2, > IMX_PLLV3_SYS, > IMX_PLLV3_USB, > IMX_PLLV3_USB_VF610, > @@ -231,6 +233,8 @@ enum imx_pllv3_type { > IMX_PLLV3_AV_IMX7, > }; > > +void imx_clk_hw_pll3_powerbit(struct clk_hw *hw, u8 shift); > + > struct clk_hw *imx_clk_hw_pllv3(enum imx_pllv3_type type, const char *name, > const char *parent_name, void __iomem *base, u32 div_mask); > > -- > 2.35.1 >
diff --git a/drivers/clk/imx/clk-pllv3.c b/drivers/clk/imx/clk-pllv3.c index 20ee9611ba6e..a1dbc3a2e280 100644 --- a/drivers/clk/imx/clk-pllv3.c +++ b/drivers/clk/imx/clk-pllv3.c @@ -23,6 +23,7 @@ #define BM_PLL_POWER (0x1 << 12) #define BM_PLL_LOCK (0x1 << 31) +#define BM_PLL_LOCK_V2 (0x1 << 29) #define IMX7_ENET_PLL_POWER (0x1 << 5) #define IMX7_DDR_PLL_POWER (0x1 << 20) @@ -34,6 +35,7 @@ * @base: base address of PLL registers * @power_bit: pll power bit mask * @powerup_set: set power_bit to power up the PLL + * @lock_bit: pll lock bit mask * @div_mask: mask of divider bits * @div_shift: shift of divider bits * @ref_clock: reference clock rate @@ -48,6 +50,7 @@ struct clk_pllv3 { void __iomem *base; u32 power_bit; bool powerup_set; + u32 lock_bit; u32 div_mask; u32 div_shift; unsigned long ref_clock; @@ -65,7 +68,7 @@ static int clk_pllv3_wait_lock(struct clk_pllv3 *pll) if ((pll->powerup_set && !val) || (!pll->powerup_set && val)) return 0; - return readl_relaxed_poll_timeout(pll->base, val, val & BM_PLL_LOCK, + return readl_relaxed_poll_timeout(pll->base, val, val & pll->lock_bit, 500, PLL_LOCK_TIMEOUT); } @@ -101,7 +104,7 @@ static int clk_pllv3_is_prepared(struct clk_hw *hw) { struct clk_pllv3 *pll = to_clk_pllv3(hw); - if (readl_relaxed(pll->base) & BM_PLL_LOCK) + if (readl_relaxed(pll->base) & pll->lock_bit) return 1; return 0; @@ -155,6 +158,39 @@ static const struct clk_ops clk_pllv3_ops = { .set_rate = clk_pllv3_set_rate, }; +static int clk_pllv3_genericv2_set_rate(struct clk_hw *hw, unsigned long rate, + unsigned long parent_rate) +{ + struct clk_pllv3 *pll = to_clk_pllv3(hw); + u32 val, div; + + div = (readl_relaxed(pll->base) >> pll->div_shift) & pll->div_mask; + val = (div == 0) ? parent_rate * 22 : parent_rate * 20; + + if (rate == val) + return 0; + + return -EINVAL; +} + +static unsigned long clk_pllv3_genericv2_recalc_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + struct clk_pllv3 *pll = to_clk_pllv3(hw); + u32 div = (readl_relaxed(pll->base) >> pll->div_shift) & pll->div_mask; + + return (div == 0) ? parent_rate * 22 : parent_rate * 20; +} + +static const struct clk_ops clk_pllv3_genericv2_ops = { + .prepare = clk_pllv3_prepare, + .unprepare = clk_pllv3_unprepare, + .is_prepared = clk_pllv3_is_prepared, + .recalc_rate = clk_pllv3_genericv2_recalc_rate, + .round_rate = clk_pllv3_round_rate, + .set_rate = clk_pllv3_genericv2_set_rate, +}; + static unsigned long clk_pllv3_sys_recalc_rate(struct clk_hw *hw, unsigned long parent_rate) { @@ -407,6 +443,13 @@ static const struct clk_ops clk_pllv3_enet_ops = { .recalc_rate = clk_pllv3_enet_recalc_rate, }; +void imx_clk_hw_pll3_powerbit(struct clk_hw *hw, u8 shift) +{ + struct clk_pllv3 *pll = to_clk_pllv3(hw); + + pll->power_bit = shift; +} + struct clk_hw *imx_clk_hw_pllv3(enum imx_pllv3_type type, const char *name, const char *parent_name, void __iomem *base, u32 div_mask) @@ -422,10 +465,20 @@ struct clk_hw *imx_clk_hw_pllv3(enum imx_pllv3_type type, const char *name, return ERR_PTR(-ENOMEM); pll->power_bit = BM_PLL_POWER; + pll->lock_bit = BM_PLL_LOCK; pll->num_offset = PLL_NUM_OFFSET; pll->denom_offset = PLL_DENOM_OFFSET; switch (type) { + case IMX_PLLV3_GENERICV2: + pll->lock_bit = BM_PLL_LOCK_V2; + pll->powerup_set = true; + ops = &clk_pllv3_genericv2_ops; + break; + case IMX_PLLV3_SYSV2: + pll->lock_bit = BM_PLL_LOCK_V2; + pll->powerup_set = true; + fallthrough; case IMX_PLLV3_SYS: ops = &clk_pllv3_sys_ops; break; diff --git a/drivers/clk/imx/clk.h b/drivers/clk/imx/clk.h index 7d220a01de1f..e70e985840a4 100644 --- a/drivers/clk/imx/clk.h +++ b/drivers/clk/imx/clk.h @@ -220,6 +220,8 @@ struct clk_hw *imx_clk_hw_sscg_pll(const char *name, enum imx_pllv3_type { IMX_PLLV3_GENERIC, + IMX_PLLV3_GENERICV2, + IMX_PLLV3_SYSV2, IMX_PLLV3_SYS, IMX_PLLV3_USB, IMX_PLLV3_USB_VF610, @@ -231,6 +233,8 @@ enum imx_pllv3_type { IMX_PLLV3_AV_IMX7, }; +void imx_clk_hw_pll3_powerbit(struct clk_hw *hw, u8 shift); + struct clk_hw *imx_clk_hw_pllv3(enum imx_pllv3_type type, const char *name, const char *parent_name, void __iomem *base, u32 div_mask);
The i.MXRT1170 has a pll that has the multiplier bits inverted and cannot be changed add IMX_PLLV3_GENERICV2. The i.MXRT1170 also has the lock bit moved as well as the power bit inverted the power bit also is in different locations on each pll control register. Signed-off-by: Jesse Taube <Mr.Bossman075@gmail.com> --- V1 -> V2: - Nothing done --- drivers/clk/imx/clk-pllv3.c | 57 +++++++++++++++++++++++++++++++++++-- drivers/clk/imx/clk.h | 4 +++ 2 files changed, 59 insertions(+), 2 deletions(-)