diff mbox series

[v2,1/5] ARM: dts: socfpga: Change Mercury+ AA1 dts to dtsi

Message ID 20220601154647.80071-2-pan@semihalf.com (mailing list archive)
State Accepted
Commit 7e0ed53b074ce8331b5fd7941408fe0c0ca784b1
Headers show
Series Add Chameleon v3 devicetree | expand

Commit Message

Paweł Anikiel June 1, 2022, 3:46 p.m. UTC 
The Mercury+ AA1 is not a standalone board, rather it's a module
with an Arria 10 SoC. Remove status = "okay" and i2c aliases, as they
are routed to the base board and should be enabled from there.

Signed-off-by: Paweł Anikiel <pan@semihalf.com>
---
 arch/arm/boot/dts/Makefile                    |  1 -
 ...1.dts => socfpga_arria10_mercury_aa1.dtsi} | 28 -------------------
 2 files changed, 29 deletions(-)
 rename arch/arm/boot/dts/{socfpga_arria10_mercury_aa1.dts => socfpga_arria10_mercury_aa1.dtsi} (84%)

Comments

Krzysztof Kozlowski June 2, 2022, 6:39 a.m. UTC | #1 
On 01/06/2022 17:46, Paweł Anikiel wrote:
> The Mercury+ AA1 is not a standalone board, rather it's a module
> with an Arria 10 SoC. Remove status = "okay" and i2c aliases, as they
> are routed to the base board and should be enabled from there.
> 
> Signed-off-by: Paweł Anikiel <pan@semihalf.com>


Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>


Best regards,
Krzysztof
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index edfbedaa6168..023c8b4ba45c 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -1146,7 +1146,6 @@  dtb-$(CONFIG_ARCH_S5PV210) += \
 	s5pv210-torbreck.dtb
 dtb-$(CONFIG_ARCH_INTEL_SOCFPGA) += \
 	socfpga_arria5_socdk.dtb \
-	socfpga_arria10_mercury_aa1.dtb \
 	socfpga_arria10_socdk_nand.dtb \
 	socfpga_arria10_socdk_qspi.dtb \
 	socfpga_arria10_socdk_sdmmc.dtb \
diff --git a/arch/arm/boot/dts/socfpga_arria10_mercury_aa1.dts b/arch/arm/boot/dts/socfpga_arria10_mercury_aa1.dtsi
similarity index 84%
rename from arch/arm/boot/dts/socfpga_arria10_mercury_aa1.dts
rename to arch/arm/boot/dts/socfpga_arria10_mercury_aa1.dtsi
index a75c059b6727..4b21351f2694 100644
--- a/arch/arm/boot/dts/socfpga_arria10_mercury_aa1.dts
+++ b/arch/arm/boot/dts/socfpga_arria10_mercury_aa1.dtsi
@@ -1,5 +1,4 @@ 
 // SPDX-License-Identifier: GPL-2.0
-/dts-v1/;
 
 #include "socfpga_arria10.dtsi"
 
@@ -11,8 +10,6 @@  / {
 	aliases {
 		ethernet0 = &gmac0;
 		serial1 = &uart1;
-		i2c0 = &i2c0;
-		i2c1 = &i2c1;
 	};
 
 	memory@0 {
@@ -43,7 +40,6 @@  &gmac0 {
 	phy-addr = <0xffffffff>; /* probe for phy addr */
 
 	max-frame-size = <3800>;
-	status = "okay";
 
 	phy-handle = <&phy3>;
 
@@ -69,22 +65,8 @@  phy3: ethernet-phy@3 {
 	};
 };
 
-&gpio0 {
-	status = "okay";
-};
-
-&gpio1 {
-	status = "okay";
-};
-
-&gpio2 {
-	status = "okay";
-};
-
 &i2c1 {
-	status = "okay";
 	isl12022: isl12022@6f {
-		status = "okay";
 		compatible = "isil,isl12022";
 		reg = <0x6f>;
 	};
@@ -92,7 +74,6 @@  isl12022: isl12022@6f {
 
 /* Following mappings are taken from arria10 socdk dts */
 &mmc {
-	status = "okay";
 	cap-sd-highspeed;
 	broken-cd;
 	bus-width = <4>;
@@ -101,12 +82,3 @@  &mmc {
 &osc1 {
 	clock-frequency = <33330000>;
 };
-
-&uart1 {
-	status = "okay";
-};
-
-&usb0 {
-	status = "okay";
-	dr_mode = "host";
-};