diff mbox series

[v2,14/48] arm64: dts: freescale: align led node names with dtschema

Message ID 20220609113938.380466-5-krzysztof.kozlowski@linaro.org (mailing list archive)
State Superseded
Headers show
Series dt-bindings: input: gpio-keys: rework matching children | expand

Commit Message

Krzysztof Kozlowski June 9, 2022, 11:39 a.m. UTC
The node names should be generic and DT schema expects certain pattern
with 'led'.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 arch/arm64/boot/dts/freescale/fsl-ls1088a-ten64.dts | 6 +++---
 arch/arm64/boot/dts/freescale/imx8mm-mx8menlo.dts   | 4 ++--
 2 files changed, 5 insertions(+), 5 deletions(-)

Comments

Shawn Guo June 19, 2022, 8:12 a.m. UTC | #1
On Thu, Jun 09, 2022 at 01:39:33PM +0200, Krzysztof Kozlowski wrote:
> The node names should be generic and DT schema expects certain pattern
> with 'led'.
> 
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Applied, thanks!
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a-ten64.dts b/arch/arm64/boot/dts/freescale/fsl-ls1088a-ten64.dts
index aa38f5379558..ef6c8967533e 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1088a-ten64.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a-ten64.dts
@@ -52,17 +52,17 @@  button-admin {
 	leds {
 		compatible = "gpio-leds";
 
-		sfp1down {
+		led-0 {
 			label = "ten64:green:sfp1:down";
 			gpios = <&gpio3 11 GPIO_ACTIVE_HIGH>;
 		};
 
-		sfp2up {
+		led-1 {
 			label = "ten64:green:sfp2:up";
 			gpios = <&gpio3 12 GPIO_ACTIVE_HIGH>;
 		};
 
-		admin {
+		led-2 {
 			label = "ten64:admin";
 			gpios = <&sfpgpio 12 GPIO_ACTIVE_HIGH>;
 		};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-mx8menlo.dts b/arch/arm64/boot/dts/freescale/imx8mm-mx8menlo.dts
index 92eaf4ef4563..c97f4e06ae5f 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-mx8menlo.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mm-mx8menlo.dts
@@ -20,13 +20,13 @@  leds {
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_led>;
 
-		user1 {
+		led-1 {
 			label = "TestLed601";
 			gpios = <&gpio4 18 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "mmc0";
 		};
 
-		user2 {
+		led-2 {
 			label = "TestLed602";
 			gpios = <&gpio4 10 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "heartbeat";