diff mbox series

[V3,6/6] ARM: imx_v6_v7_defconfig: Enable Tarragon peripheral drivers

Message ID 20230331095715.5988-7-stefan.wahren@chargebyte.com (mailing list archive)
State Superseded
Headers show
Series ARM: dts: imx6ull: Add chargebyte Tarragon support | expand

Commit Message

Stefan Wahren March 31, 2023, 9:57 a.m. UTC 
We need to enable some drivers in order to use the following peripherals
of Tarragon:
  * QCA7000/7005 Powerline chip
  * One-Wire Master DS2484 with external thermal sensors
  * external 4 pin PWM fan
  * ST IIS328DQ I2C accelerometer

Signed-off-by: Stefan Wahren <stefan.wahren@chargebyte.com>
---
 arch/arm/configs/imx_v6_v7_defconfig | 6 ++++++
 1 file changed, 6 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig
index 9475839e7fe1..2e2af31eeb4c 100644
--- a/arch/arm/configs/imx_v6_v7_defconfig
+++ b/arch/arm/configs/imx_v6_v7_defconfig
@@ -128,6 +128,7 @@  CONFIG_CS89x0_PLATFORM=y
 # CONFIG_NET_VENDOR_MICREL is not set
 # CONFIG_NET_VENDOR_MICROCHIP is not set
 # CONFIG_NET_VENDOR_NATSEMI is not set
+CONFIG_QCA7000_SPI=m
 # CONFIG_NET_VENDOR_SEEQ is not set
 CONFIG_SMC91X=y
 CONFIG_SMC911X=y
@@ -216,6 +217,9 @@  CONFIG_GPIO_PCF857X=y
 CONFIG_GPIO_BD71815=y
 CONFIG_GPIO_STMPE=y
 CONFIG_GPIO_74X164=y
+CONFIG_W1=m
+CONFIG_W1_MASTER_DS2482=m
+CONFIG_W1_SLAVE_THERM=m
 CONFIG_POWER_RESET=y
 CONFIG_POWER_RESET_SYSCON=y
 CONFIG_POWER_RESET_SYSCON_POWEROFF=y
@@ -224,6 +228,7 @@  CONFIG_RN5T618_POWER=m
 CONFIG_SENSORS_MC13783_ADC=y
 CONFIG_SENSORS_GPIO_FAN=y
 CONFIG_SENSORS_IIO_HWMON=y
+CONFIG_SENSORS_PWM_FAN=y
 CONFIG_SENSORS_SY7636A=y
 CONFIG_THERMAL_STATISTICS=y
 CONFIG_THERMAL_WRITABLE_TRIPS=y
@@ -409,6 +414,7 @@  CONFIG_CLK_IMX8MQ=y
 CONFIG_SOC_IMX8M=y
 CONFIG_EXTCON_USB_GPIO=y
 CONFIG_IIO=y
+CONFIG_IIO_ST_ACCEL_3AXIS=m
 CONFIG_MMA8452=y
 CONFIG_IMX7D_ADC=y
 CONFIG_RN5T618_ADC=y