[GIT,PULL] RISC-V Devicetrees for v6.10 Take 2

Pull-request

https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux.git/ riscv-dt-for-v6.10-take2

Message

Conor Dooley May 8, 2024, 8:13 p.m. UTC

Hey Arnd,

Here's a second attempt for ya.. The canaan stuff is dropped and I'll
send it to you for 6.11 instead.

Cheers,
Conor.

The following changes since commit 4cece764965020c22cff7665b18a012006359095:

  Linux 6.9-rc1 (2024-03-24 14:10:05 -0700)

are available in the Git repository at:

  https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux.git/ riscv-dt-for-v6.10-take2

for you to fetch changes up to 1c80d50bb697f84bfbc3876e08e1a1d42bfbdddb:

  riscv: dts: microchip: add pac1934 power-monitor to icicle (2024-05-07 17:14:06 +0100)

----------------------------------------------------------------
RISC-V Devicetrees for v6.10

Microchip:
A simple addition of a power-monitor on the Icicle dev board, as the
binding for it is now in mainline.

StarFive:
Support for the Milk-V Mars. This board is incredibly similar to the
VisionFive v2 that is already supported, with only the really ethernet
configuration being slightly different. Emil requested that a common
dtsi file, so my fixes branch is pulled into for-next to avoid an
annoying conflict between moved content and some erroneously added
nodes that were removed as fixes this cycle.

T-Head:
Re-ordering of some nodes to match the DTS coding style on the th1520.

Signed-off-by: Conor Dooley <[e-mail]>

----------------------------------------------------------------
Conor Dooley (2):
      RISC-V: add Milkv Mars board devicetree
      riscv: dts: microchip: add pac1934 power-monitor to icicle

Hannah Peuckmann (2):
      riscv: dts: starfive: visionfive 2: Remove non-existing TDM hardware
      riscv: dts: starfive: visionfive 2: Remove non-existing I2S hardware

Jisheng Zhang (8):
      riscv: dts: starfive: add 'cpus' label to jh7110 and jh7100 soc dtsi
      dt-bindings: riscv: starfive: add Milkv Mars board
      riscv: dts: starfive: visionfive 2: update sound and codec dt node name
      riscv: dts: starfive: visionfive 2: use cpus label for timebase freq
      riscv: dts: starfive: visionfive 2: add tf cd-gpios
      riscv: dts: starfive: visionfive 2: add "disable-wp" for tfcard
      riscv: dts: starfive: introduce a common board dtsi for jh7110 based boards
      riscv: dts: starfive: add Milkv Mars board device tree

Shengyu Qu (1):
      riscv: dts: starfive: Remove PMIC interrupt info for Visionfive 2 board

Thomas Bonnefille (1):
      riscv: dts: thead: Fix node ordering in TH1520 device tree

 .../devicetree/bindings/riscv/starfive.yaml        |   1 +
 arch/riscv/boot/dts/microchip/mpfs-icicle-kit.dts  |  32 +
 arch/riscv/boot/dts/starfive/Makefile              |   1 +
 arch/riscv/boot/dts/starfive/jh7100.dtsi           |   2 +-
 arch/riscv/boot/dts/starfive/jh7110-common.dtsi    | 599 ++++++++++++++++++
 arch/riscv/boot/dts/starfive/jh7110-milkv-mars.dts |  30 +
 .../dts/starfive/jh7110-starfive-visionfive-2.dtsi | 683 +--------------------
 arch/riscv/boot/dts/starfive/jh7110.dtsi           |   2 +-
 arch/riscv/boot/dts/thead/th1520.dtsi              |  54 +-
 9 files changed, 693 insertions(+), 711 deletions(-)
 create mode 100644 arch/riscv/boot/dts/starfive/jh7110-common.dtsi
 create mode 100644 arch/riscv/boot/dts/starfive/jh7110-milkv-mars.dts

Comments

[e-mail] May 8, 2024, 8:30 p.m. UTC | #1

Hello:

This pull request was applied to soc/soc.git (for-next)
by Arnd Bergmann <[e-mail]>:

On Wed, 8 May 2024 21:13:54 +0100 you wrote:
> Hey Arnd,
> 
> Here's a second attempt for ya.. The canaan stuff is dropped and I'll
> send it to you for 6.11 instead.
> 
> Cheers,
> Conor.
> 
> [...]

Here is the summary with links:
  - [GIT,PULL] RISC-V Devicetrees for v6.10 Take 2
    https://git.kernel.org/soc/soc/c/01a7f9e1a97e

You are awesome, thank you!