diff mbox series

[v1,08/10] arm64: dts: aspeed: Add initial AST27XX device tree

Message ID 20240726110355.2181563-9-kevin_chen@aspeedtech.com (mailing list archive)
State Changes Requested
Headers show
Series Introduce ASPEED AST27XX BMC SoC | expand

Commit Message

Kevin Chen July 26, 2024, 11:03 a.m. UTC
---
 arch/arm64/boot/dts/Makefile              |   1 +
 arch/arm64/boot/dts/aspeed/aspeed-g7.dtsi | 217 ++++++++++++++++++++++
 2 files changed, 218 insertions(+)
 create mode 100644 arch/arm64/boot/dts/aspeed/aspeed-g7.dtsi

Comments

Krzysztof Kozlowski July 26, 2024, 11:19 a.m. UTC | #1
On 26/07/2024 13:03, Kevin Chen wrote:
> ---
>  arch/arm64/boot/dts/Makefile              |   1 +
>  arch/arm64/boot/dts/aspeed/aspeed-g7.dtsi | 217 ++++++++++++++++++++++
>  2 files changed, 218 insertions(+)
>  create mode 100644 arch/arm64/boot/dts/aspeed/aspeed-g7.dtsi
> 
> diff --git a/arch/arm64/boot/dts/Makefile b/arch/arm64/boot/dts/Makefile
> index 21cd3a87f385..c909c19dc5dd 100644
> --- a/arch/arm64/boot/dts/Makefile
> +++ b/arch/arm64/boot/dts/Makefile
> @@ -34,3 +34,4 @@ subdir-y += tesla
>  subdir-y += ti
>  subdir-y += toshiba
>  subdir-y += xilinx
> +subdir-y += aspeed
> diff --git a/arch/arm64/boot/dts/aspeed/aspeed-g7.dtsi b/arch/arm64/boot/dts/aspeed/aspeed-g7.dtsi
> new file mode 100644
> index 000000000000..858ab95251e4
> --- /dev/null
> +++ b/arch/arm64/boot/dts/aspeed/aspeed-g7.dtsi
> @@ -0,0 +1,217 @@
> +// SPDX-License-Identifier: GPL-2.0-or-later
> +#include <dt-bindings/clock/aspeed,ast2700-clk.h>
> +#include <dt-bindings/reset/aspeed,ast2700-reset.h>
> +#include <dt-bindings/interrupt-controller/arm-gic.h>
> +#include <dt-bindings/interrupt-controller/aspeed-scu-ic.h>
> +
> +/ {
> +	model = "Aspeed BMC";

Model of what? No, drop.

> +	compatible = "aspeed,ast2700";

Please run scripts/checkpatch.pl and fix reported warnings. Then please
run `scripts/checkpatch.pl --strict` and (probably) fix more warnings.
Some warnings can be ignored, especially from --strict run, but the code
here looks like it needs a fix. Feel free to get in touch if the warning
is not clear.


> +	#address-cells = <2>;
> +	#size-cells = <2>;
> +	interrupt-parent = <&gic>;
> +
> +	aliases {
> +		serial12 = &uart12;

Nope. Such aliases are board specific.

> +	};
> +
> +	cpus {
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +
> +		cpu@0 {
> +			compatible = "arm,cortex-a35";
> +			enable-method = "psci";
> +			device_type = "cpu";
> +			reg = <0>;
> +			d-cache-size = <0x8000>;
> +			d-cache-line-size = <64>;
> +			d-cache-sets = <128>;
> +			i-cache-size = <0x8000>;
> +			i-cache-line-size = <64>;
> +			i-cache-sets = <256>;
> +			next-level-cache = <&l2>;
> +		};
> +
> +		cpu@1 {
> +			compatible = "arm,cortex-a35";
> +			enable-method = "psci";
> +			device_type = "cpu";
> +			reg = <1>;
> +			d-cache-size = <0x8000>;
> +			d-cache-line-size = <64>;
> +			d-cache-sets = <128>;
> +			i-cache-size = <0x8000>;
> +			i-cache-line-size = <64>;
> +			i-cache-sets = <256>;
> +			next-level-cache = <&l2>;
> +		};
> +
> +		cpu@2 {
> +			compatible = "arm,cortex-a35";
> +			enable-method = "psci";
> +			device_type = "cpu";
> +			reg = <2>;
> +			d-cache-size = <0x8000>;
> +			d-cache-line-size = <64>;
> +			d-cache-sets = <128>;
> +			i-cache-size = <0x8000>;
> +			i-cache-line-size = <64>;
> +			i-cache-sets = <256>;
> +			next-level-cache = <&l2>;
> +		};
> +
> +		cpu@3 {
> +			compatible = "arm,cortex-a35";
> +			enable-method = "psci";
> +			device_type = "cpu";
> +			reg = <3>;
> +			d-cache-size = <0x8000>;
> +			d-cache-line-size = <64>;
> +			d-cache-sets = <128>;
> +			i-cache-size = <0x8000>;
> +			i-cache-line-size = <64>;
> +			i-cache-sets = <256>;
> +			next-level-cache = <&l2>;
> +		};
> +
> +		l2: l2-cache0 {
> +			compatible = "cache";
> +			cache-size = <0x80000>;
> +			cache-line-size = <64>;
> +			cache-sets = <1024>;
> +			cache-level = <2>;
> +		};
> +	};
> +
> +	pmu {
> +		compatible = "arm,cortex-a35-pmu";
> +		interrupt-parent = <&gic>;
> +		interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
> +	};
> +
> +	psci {

Order the nodes according to DTS coding style.

Fix all your patches:
1. To pass flawlessly checkpatch (you did not run it)
2. To pass dt_binding_check and dtbs_check (you did not run these)
3. To adhere to kernel coding style
4. To adhere to DTS coding style

> +		compatible = "arm,psci-1.0";
> +		method = "smc";
> +	};
> +
> +	gic: interrupt-controller@12200000 {

Nope, this cannot be outside of SoC.

> +		compatible = "arm,gic-v3";
> +		interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
> +		#interrupt-cells = <3>;
> +		interrupt-controller;
> +		interrupt-parent = <&gic>;
> +		#redistributor-regions = <1>;
> +		reg =	<0 0x12200000 0 0x10000>,		//GICD
> +			<0 0x12280000 0 0x80000>,		//GICR
> +			<0 0x40440000 0 0x1000>;		//GICC

Read DTS coding style and order this correctly.

> +	};
> +
> +	timer {
> +		compatible = "arm,armv8-timer";
> +		interrupt-parent = <&gic>;
> +		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
> +				<GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
> +				<GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
> +				<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
> +		arm,cpu-registers-not-fw-configured;
> +		always-on;
> +	};
> +
> +	soc0: soc@10000000 {
> +		compatible = "simple-bus";
> +		#address-cells = <2>;
> +		#size-cells = <2>;
> +		ranges;
> +
> +		soc0_sram: sram@10000000 {
> +			compatible = "mmio-sram";
> +			reg = <0x0 0x10000000 0x0 0x20000>;	/* 128KiB SRAM on soc0 */
> +			ranges = <0x0 0x0 0x0 0x10000000 0x0 0x20000>;
> +			#address-cells = <2>;
> +			#size-cells = <2>;
> +			no-memory-wc;
> +
> +			exported@0 {
> +				reg = <0 0x0 0 0x20000>;
> +				export;
> +			};
> +		};
> +
> +		syscon0: syscon@12c02000 {
> +			compatible = "aspeed,ast2700-scu0", "syscon", "simple-mfd";
> +			reg = <0x0 0x12c02000 0x0 0x1000>;
> +			ranges = <0x0 0x0 0 0x12c02000 0 0x1000>;
> +			#address-cells = <2>;
> +			#size-cells = <2>;
> +			#clock-cells = <1>;
> +			#reset-cells = <1>;
> +
> +			silicon-id@0 {
> +				compatible = "aspeed,ast2700-silicon-id", "aspeed,silicon-id";
> +				reg = <0 0x0 0 0x4>;
> +			};
> +
> +			scu_ic0: interrupt-controller@1D0 {

DTS coding style...

> +				#interrupt-cells = <1>;
> +				compatible = "aspeed,ast2700-scu-ic0";
> +				reg = <0 0x1d0 0 0xc>;
> +				interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
> +				interrupt-controller;
> +			};
> +
> +			scu_ic1: interrupt-controller@1E0 {
> +				#interrupt-cells = <1>;
> +				compatible = "aspeed,ast2700-scu-ic1";
> +				reg = <0 0x1e0 0 0xc>;
> +				interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
> +				interrupt-controller;
> +			};
> +
> +			soc0_rst: reset-controller@200 {
> +				reg = <0 0x200 0 0x40>;
> +			};
> +
> +			soc0_clk: clock-controller@240 {
> +				reg = <0 0x240 0 0x1c0>;
> +			};
> +		};
> +
> +	};
> +
> +	soc1: soc@14000000 {

Wait, what, to socs?

> +		compatible = "simple-bus";
> +		#address-cells = <2>;
> +		#size-cells = <2>;
> +		ranges;
> +
> +		syscon1: syscon@14c02000 {
> +			compatible = "aspeed,ast2700-scu1", "syscon", "simple-mfd";
> +			reg = <0x0 0x14c02000 0x0 0x1000>;
> +			ranges = <0x0 0x0 0x0 0x14c02000 0x0 0x1000>;
> +			#address-cells = <2>;
> +			#size-cells = <2>;
> +			#clock-cells = <1>;
> +			#reset-cells = <1>;
> +
> +			soc1_rst: reset-controller@200 {
> +				#reset-cells = <1>;
> +			};
> +
> +			soc1_clk: clock-controller@240 {
> +				reg = <0 0x240 0 0x1c0>;
> +			};
> +		};
> +
> +		uart12: serial@14c33b00 {
> +			compatible = "ns16550a";
> +			reg = <0x0 0x14c33b00 0x0 0x100>;
> +			reg-shift = <2>;
> +			reg-io-width = <4>;
> +			clocks = <&syscon1 SCU1_CLK_GATE_UART12CLK>;
> +			no-loopback-test;
> +			pinctrl-names = "default";

What is this?

> +		};
> +	};
> +};
> +

Best regards,
Krzysztof
Kevin Chen Aug. 15, 2024, 5:50 a.m. UTC | #2
Hi Krzk,

>> ---
>>  arch/arm64/boot/dts/Makefile              |   1 +
>>  arch/arm64/boot/dts/aspeed/aspeed-g7.dtsi | 217 ++++++++++++++++++++++
>>  2 files changed, 218 insertions(+)
>>  create mode 100644 arch/arm64/boot/dts/aspeed/aspeed-g7.dtsi
>>
>> diff --git a/arch/arm64/boot/dts/Makefile b/arch/arm64/boot/dts/Makefile
>> index 21cd3a87f385..c909c19dc5dd 100644
>> --- a/arch/arm64/boot/dts/Makefile
>> +++ b/arch/arm64/boot/dts/Makefile
>> @@ -34,3 +34,4 @@ subdir-y += tesla
>>  subdir-y += ti
>>  subdir-y += toshiba
>>  subdir-y += xilinx
>> +subdir-y += aspeed
>> diff --git a/arch/arm64/boot/dts/aspeed/aspeed-g7.dtsi b/arch/arm64/boot/dts/aspeed/aspeed-g7.dtsi
>> new file mode 100644
>> index 000000000000..858ab95251e4
>> --- /dev/null
>> +++ b/arch/arm64/boot/dts/aspeed/aspeed-g7.dtsi
>> @@ -0,0 +1,217 @@
>> +// SPDX-License-Identifier: GPL-2.0-or-later
>> +#include <dt-bindings/clock/aspeed,ast2700-clk.h>
>> +#include <dt-bindings/reset/aspeed,ast2700-reset.h>
>> +#include <dt-bindings/interrupt-controller/arm-gic.h>
>> +#include <dt-bindings/interrupt-controller/aspeed-scu-ic.h>
>> +
>> +/ {
>> +     model = "Aspeed BMC";
>
>Model of what? No, drop.
Can I change to "model = "AST2700 EVB""

>
>> +     compatible = "aspeed,ast2700";
>
>Please run scripts/checkpatch.pl and fix reported warnings. Then please
>run `scripts/checkpatch.pl --strict` and (probably) fix more warnings.
>Some warnings can be ignored, especially from --strict run, but the code
>here looks like it needs a fix. Feel free to get in touch if the warning
>is not clear.
>
>
>> +     #address-cells = <2>;
>> +     #size-cells = <2>;
>> +     interrupt-parent = <&gic>;
>> +
>> +     aliases {
>> +             serial12 = &uart12;
>
>Nope. Such aliases are board specific.
Agree, I will move to ast2700-evb.dts.
>
>> +     };
>> +
>> +     cpus {
>> +             #address-cells = <1>;
>> +             #size-cells = <0>;
>> +
>> +             cpu@0 {
>> +                     compatible = "arm,cortex-a35";
>> +                     enable-method = "psci";
>> +                     device_type = "cpu";
>> +                     reg = <0>;
>> +                     d-cache-size = <0x8000>;
>> +                     d-cache-line-size = <64>;
>> +                     d-cache-sets = <128>;
>> +                     i-cache-size = <0x8000>;
>> +                     i-cache-line-size = <64>;
>> +                     i-cache-sets = <256>;
>> +                     next-level-cache = <&l2>;
>> +             };
>> +
>> +             cpu@1 {
>> +                     compatible = "arm,cortex-a35";
>> +                     enable-method = "psci";
>> +                     device_type = "cpu";
>> +                     reg = <1>;
>> +                     d-cache-size = <0x8000>;
>> +                     d-cache-line-size = <64>;
>> +                     d-cache-sets = <128>;
>> +                     i-cache-size = <0x8000>;
>> +                     i-cache-line-size = <64>;
>> +                     i-cache-sets = <256>;
>> +                     next-level-cache = <&l2>;
>> +             };
>> +
>> +             cpu@2 {
>> +                     compatible = "arm,cortex-a35";
>> +                     enable-method = "psci";
>> +                     device_type = "cpu";
>> +                     reg = <2>;
>> +                     d-cache-size = <0x8000>;
>> +                     d-cache-line-size = <64>;
>> +                     d-cache-sets = <128>;
>> +                     i-cache-size = <0x8000>;
>> +                     i-cache-line-size = <64>;
>> +                     i-cache-sets = <256>;
>> +                     next-level-cache = <&l2>;
>> +             };
>> +
>> +             cpu@3 {
>> +                     compatible = "arm,cortex-a35";
>> +                     enable-method = "psci";
>> +                     device_type = "cpu";
>> +                     reg = <3>;
>> +                     d-cache-size = <0x8000>;
>> +                     d-cache-line-size = <64>;
>> +                     d-cache-sets = <128>;
>> +                     i-cache-size = <0x8000>;
>> +                     i-cache-line-size = <64>;
>> +                     i-cache-sets = <256>;
>> +                     next-level-cache = <&l2>;
>> +             };
>> +
>> +             l2: l2-cache0 {
>> +                     compatible = "cache";
>> +                     cache-size = <0x80000>;
>> +                     cache-line-size = <64>;
>> +                     cache-sets = <1024>;
>> +                     cache-level = <2>;
>> +             };
>> +     };
>> +
>> +     pmu {
>> +             compatible = "arm,cortex-a35-pmu";
>> +             interrupt-parent = <&gic>;
>> +             interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
>> +     };
>> +
>> +     psci {
>
>Order the nodes according to DTS coding style.
>
>Fix all your patches:
>1. To pass flawlessly checkpatch (you did not run it)
>2. To pass dt_binding_check and dtbs_check (you did not run these)
>3. To adhere to kernel coding style
>4. To adhere to DTS coding style
Agree.
>
>> +             compatible = "arm,psci-1.0";
>> +             method = "smc";
>> +     };
>> +
>> +     gic: interrupt-controller@12200000 {
>
>Nope, this cannot be outside of SoC.
Agree.
>
>> +             compatible = "arm,gic-v3";
>> +             interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
>> +             #interrupt-cells = <3>;
>> +             interrupt-controller;
>> +             interrupt-parent = <&gic>;
>> +             #redistributor-regions = <1>;
>> +             reg =   <0 0x12200000 0 0x10000>,               //GICD
>> +                     <0 0x12280000 0 0x80000>,               //GICR
>> +                     <0 0x40440000 0 0x1000>;                //GICC
>
>Read DTS coding style and order this correctly.
Agree.
>
>> +     };
>> +
>> +     timer {
>> +             compatible = "arm,armv8-timer";
>> +             interrupt-parent = <&gic>;
>> +             interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
>> +                             <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
>> +                             <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
>> +                             <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
>> +             arm,cpu-registers-not-fw-configured;
>> +             always-on;
>> +     };
>> +
>> +     soc0: soc@10000000 {
>> +             compatible = "simple-bus";
>> +             #address-cells = <2>;
>> +             #size-cells = <2>;
>> +             ranges;
>> +
>> +             soc0_sram: sram@10000000 {
>> +                     compatible = "mmio-sram";
>> +                     reg = <0x0 0x10000000 0x0 0x20000>;     /* 128KiB SRAM on soc0 */
>> +                     ranges = <0x0 0x0 0x0 0x10000000 0x0 0x20000>;
>> +                     #address-cells = <2>;
>> +                     #size-cells = <2>;
>> +                     no-memory-wc;
>> +
>> +                     exported@0 {
>> +                             reg = <0 0x0 0 0x20000>;
>> +                             export;
>> +                     };
>> +             };
>> +
>> +             syscon0: syscon@12c02000 {
>> +                     compatible = "aspeed,ast2700-scu0", "syscon", "simple-mfd";
>> +                     reg = <0x0 0x12c02000 0x0 0x1000>;
>> +                     ranges = <0x0 0x0 0 0x12c02000 0 0x1000>;
>> +                     #address-cells = <2>;
>> +                     #size-cells = <2>;
>> +                     #clock-cells = <1>;
>> +                     #reset-cells = <1>;
>> +
>> +                     silicon-id@0 {
>> +                             compatible = "aspeed,ast2700-silicon-id", "aspeed,silicon-id";
>> +                             reg = <0 0x0 0 0x4>;
>> +                     };
>> +
>> +                     scu_ic0: interrupt-controller@1D0 {
>
>DTS coding style...
Agree. I will fix to "scu_ic0: interrupt-controller@1d0 {"

>
>> +                             #interrupt-cells = <1>;
>> +                             compatible = "aspeed,ast2700-scu-ic0";
>> +                             reg = <0 0x1d0 0 0xc>;
>> +                             interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
>> +                             interrupt-controller;
>> +                     };
>> +
>> +                     scu_ic1: interrupt-controller@1E0 {
>> +                             #interrupt-cells = <1>;
>> +                             compatible = "aspeed,ast2700-scu-ic1";
>> +                             reg = <0 0x1e0 0 0xc>;
>> +                             interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
>> +                             interrupt-controller;
>> +                     };
>> +
>> +                     soc0_rst: reset-controller@200 {
>> +                             reg = <0 0x200 0 0x40>;
>> +                     };
>> +
>> +                     soc0_clk: clock-controller@240 {
>> +                             reg = <0 0x240 0 0x1c0>;
>> +                     };
>> +             };
>> +
>> +     };
>> +
>> +     soc1: soc@14000000 {
>
>Wait, what, to socs?
Yes, two socs in different die.

>
>> +             compatible = "simple-bus";
>> +             #address-cells = <2>;
>> +             #size-cells = <2>;
>> +             ranges;
>> +
>> +             syscon1: syscon@14c02000 {
>> +                     compatible = "aspeed,ast2700-scu1", "syscon", "simple-mfd";
>> +                     reg = <0x0 0x14c02000 0x0 0x1000>;
>> +                     ranges = <0x0 0x0 0x0 0x14c02000 0x0 0x1000>;
>> +                     #address-cells = <2>;
>> +                     #size-cells = <2>;
>> +                     #clock-cells = <1>;
>> +                     #reset-cells = <1>;
>> +
>> +                     soc1_rst: reset-controller@200 {
>> +                             #reset-cells = <1>;
>> +                     };
>> +
>> +                     soc1_clk: clock-controller@240 {
>> +                             reg = <0 0x240 0 0x1c0>;
>> +                     };
>> +             };
>> +
>> +             uart12: serial@14c33b00 {
>> +                     compatible = "ns16550a";
>> +                     reg = <0x0 0x14c33b00 0x0 0x100>;
>> +                     reg-shift = <2>;
>> +                     reg-io-width = <4>;
>> +                     clocks = <&syscon1 SCU1_CLK_GATE_UART12CLK>;
>> +                     no-loopback-test;
>> +                     pinctrl-names = "default";
>
>What is this?
BMC uart using in uart12 in soc1.

>
>> +             };
>> +     };
>> +};
>> +

--
Best Regards,
Kevin. Chen
Kevin Chen Aug. 16, 2024, 4:07 a.m. UTC | #3
Hi Krzk,

> > ---
> >  arch/arm64/boot/dts/Makefile              |   1 +
> >  arch/arm64/boot/dts/aspeed/aspeed-g7.dtsi | 217
> > ++++++++++++++++++++++
> >  2 files changed, 218 insertions(+)
> >  create mode 100644 arch/arm64/boot/dts/aspeed/aspeed-g7.dtsi
> >
> > diff --git a/arch/arm64/boot/dts/Makefile
> > b/arch/arm64/boot/dts/Makefile index 21cd3a87f385..c909c19dc5dd
> 100644
> > --- a/arch/arm64/boot/dts/Makefile
> > +++ b/arch/arm64/boot/dts/Makefile
> > @@ -34,3 +34,4 @@ subdir-y += tesla
> >  subdir-y += ti
> >  subdir-y += toshiba
> >  subdir-y += xilinx
> > +subdir-y += aspeed
> > diff --git a/arch/arm64/boot/dts/aspeed/aspeed-g7.dtsi
> > b/arch/arm64/boot/dts/aspeed/aspeed-g7.dtsi
> > new file mode 100644
> > index 000000000000..858ab95251e4
> > --- /dev/null
> > +++ b/arch/arm64/boot/dts/aspeed/aspeed-g7.dtsi
> > @@ -0,0 +1,217 @@
> > +// SPDX-License-Identifier: GPL-2.0-or-later #include
> > +<dt-bindings/clock/aspeed,ast2700-clk.h>
> > +#include <dt-bindings/reset/aspeed,ast2700-reset.h>
> > +#include <dt-bindings/interrupt-controller/arm-gic.h>
> > +#include <dt-bindings/interrupt-controller/aspeed-scu-ic.h>
> > +
> > +/ {
> > +   model = "Aspeed BMC";
>
> Model of what? No, drop.
Can I change to "model = "AST2700 EVB""

>
> > +   compatible = "aspeed,ast2700";
>
> Please run scripts/checkpatch.pl and fix reported warnings. Then please run
> `scripts/checkpatch.pl --strict` and (probably) fix more warnings.
> Some warnings can be ignored, especially from --strict run, but the code here
> looks like it needs a fix. Feel free to get in touch if the warning is not clear.
>
>
> > +   #address-cells = <2>;
> > +   #size-cells = <2>;
> > +   interrupt-parent = <&gic>;
> > +
> > +   aliases {
> > +           serial12 = &uart12;
>
> Nope. Such aliases are board specific.
Agree, I will move to ast2700-evb.dts.

>
> > +   };
> > +
> > +   cpus {
> > +           #address-cells = <1>;
> > +           #size-cells = <0>;
> > +
> > +           cpu@0 {
> > +                   compatible = "arm,cortex-a35";
> > +                   enable-method = "psci";
> > +                   device_type = "cpu";
> > +                   reg = <0>;
> > +                   d-cache-size = <0x8000>;
> > +                   d-cache-line-size = <64>;
> > +                   d-cache-sets = <128>;
> > +                   i-cache-size = <0x8000>;
> > +                   i-cache-line-size = <64>;
> > +                   i-cache-sets = <256>;
> > +                   next-level-cache = <&l2>;
> > +           };
> > +
> > +           cpu@1 {
> > +                   compatible = "arm,cortex-a35";
> > +                   enable-method = "psci";
> > +                   device_type = "cpu";
> > +                   reg = <1>;
> > +                   d-cache-size = <0x8000>;
> > +                   d-cache-line-size = <64>;
> > +                   d-cache-sets = <128>;
> > +                   i-cache-size = <0x8000>;
> > +                   i-cache-line-size = <64>;
> > +                   i-cache-sets = <256>;
> > +                   next-level-cache = <&l2>;
> > +           };
> > +
> > +           cpu@2 {
> > +                   compatible = "arm,cortex-a35";
> > +                   enable-method = "psci";
> > +                   device_type = "cpu";
> > +                   reg = <2>;
> > +                   d-cache-size = <0x8000>;
> > +                   d-cache-line-size = <64>;
> > +                   d-cache-sets = <128>;
> > +                   i-cache-size = <0x8000>;
> > +                   i-cache-line-size = <64>;
> > +                   i-cache-sets = <256>;
> > +                   next-level-cache = <&l2>;
> > +           };
> > +
> > +           cpu@3 {
> > +                   compatible = "arm,cortex-a35";
> > +                   enable-method = "psci";
> > +                   device_type = "cpu";
> > +                   reg = <3>;
> > +                   d-cache-size = <0x8000>;
> > +                   d-cache-line-size = <64>;
> > +                   d-cache-sets = <128>;
> > +                   i-cache-size = <0x8000>;
> > +                   i-cache-line-size = <64>;
> > +                   i-cache-sets = <256>;
> > +                   next-level-cache = <&l2>;
> > +           };
> > +
> > +           l2: l2-cache0 {
> > +                   compatible = "cache";
> > +                   cache-size = <0x80000>;
> > +                   cache-line-size = <64>;
> > +                   cache-sets = <1024>;
> > +                   cache-level = <2>;
> > +           };
> > +   };
> > +
> > +   pmu {
> > +           compatible = "arm,cortex-a35-pmu";
> > +           interrupt-parent = <&gic>;
> > +           interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(2) |
> IRQ_TYPE_LEVEL_HIGH)>;
> > +   };
> > +
> > +   psci {
>
> Order the nodes according to DTS coding style.
>
> Fix all your patches:
> 1. To pass flawlessly checkpatch (you did not run it) 2. To pass
> dt_binding_check and dtbs_check (you did not run these) 3. To adhere to
> kernel coding style 4. To adhere to DTS coding style
Agree.

>
> > +           compatible = "arm,psci-1.0";
> > +           method = "smc";
> > +   };
> > +
> > +   gic: interrupt-controller@12200000 {
>
> Nope, this cannot be outside of SoC.
Agree.

>
> > +           compatible = "arm,gic-v3";
> > +           interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) |
> IRQ_TYPE_LEVEL_HIGH)>;
> > +           #interrupt-cells = <3>;
> > +           interrupt-controller;
> > +           interrupt-parent = <&gic>;
> > +           #redistributor-regions = <1>;
> > +           reg =   <0 0x12200000 0 0x10000>,               //GICD
> > +                   <0 0x12280000 0 0x80000>,               //GICR
> > +                   <0 0x40440000 0 0x1000>;                //GICC
>
> Read DTS coding style and order this correctly.
Agree.

>
> > +   };
> > +
> > +   timer {
> > +           compatible = "arm,armv8-timer";
> > +           interrupt-parent = <&gic>;
> > +           interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) |
> IRQ_TYPE_LEVEL_LOW)>,
> > +                           <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) |
> IRQ_TYPE_LEVEL_LOW)>,
> > +                           <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) |
> IRQ_TYPE_LEVEL_LOW)>,
> > +                           <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) |
> IRQ_TYPE_LEVEL_LOW)>;
> > +           arm,cpu-registers-not-fw-configured;
> > +           always-on;
> > +   };
> > +
> > +   soc0: soc@10000000 {
> > +           compatible = "simple-bus";
> > +           #address-cells = <2>;
> > +           #size-cells = <2>;
> > +           ranges;
> > +
> > +           soc0_sram: sram@10000000 {
> > +                   compatible = "mmio-sram";
> > +                   reg = <0x0 0x10000000 0x0 0x20000>;     /* 128KiB SRAM on soc0
> */
> > +                   ranges = <0x0 0x0 0x0 0x10000000 0x0 0x20000>;
> > +                   #address-cells = <2>;
> > +                   #size-cells = <2>;
> > +                   no-memory-wc;
> > +
> > +                   exported@0 {
> > +                           reg = <0 0x0 0 0x20000>;
> > +                           export;
> > +                   };
> > +           };
> > +
> > +           syscon0: syscon@12c02000 {
> > +                   compatible = "aspeed,ast2700-scu0", "syscon", "simple-mfd";
> > +                   reg = <0x0 0x12c02000 0x0 0x1000>;
> > +                   ranges = <0x0 0x0 0 0x12c02000 0 0x1000>;
> > +                   #address-cells = <2>;
> > +                   #size-cells = <2>;
> > +                   #clock-cells = <1>;
> > +                   #reset-cells = <1>;
> > +
> > +                   silicon-id@0 {
> > +                           compatible = "aspeed,ast2700-silicon-id",
> "aspeed,silicon-id";
> > +                           reg = <0 0x0 0 0x4>;
> > +                   };
> > +
> > +                   scu_ic0: interrupt-controller@1D0 {
>
> DTS coding style...
Agree. I will fix to "scu_ic0: interrupt-controller@1d0 {"

>
> > +                           #interrupt-cells = <1>;
> > +                           compatible = "aspeed,ast2700-scu-ic0";
> > +                           reg = <0 0x1d0 0 0xc>;
> > +                           interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
> > +                           interrupt-controller;
> > +                   };
> > +
> > +                   scu_ic1: interrupt-controller@1E0 {
> > +                           #interrupt-cells = <1>;
> > +                           compatible = "aspeed,ast2700-scu-ic1";
> > +                           reg = <0 0x1e0 0 0xc>;
> > +                           interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
> > +                           interrupt-controller;
> > +                   };
> > +
> > +                   soc0_rst: reset-controller@200 {
> > +                           reg = <0 0x200 0 0x40>;
> > +                   };
> > +
> > +                   soc0_clk: clock-controller@240 {
> > +                           reg = <0 0x240 0 0x1c0>;
> > +                   };
> > +           };
> > +
> > +   };
> > +
> > +   soc1: soc@14000000 {
>
> Wait, what, to socs?
Yes.
In AST2700, there are two socs with different base address for use.

>
> > +           compatible = "simple-bus";
> > +           #address-cells = <2>;
> > +           #size-cells = <2>;
> > +           ranges;
> > +
> > +           syscon1: syscon@14c02000 {
> > +                   compatible = "aspeed,ast2700-scu1", "syscon", "simple-mfd";
> > +                   reg = <0x0 0x14c02000 0x0 0x1000>;
> > +                   ranges = <0x0 0x0 0x0 0x14c02000 0x0 0x1000>;
> > +                   #address-cells = <2>;
> > +                   #size-cells = <2>;
> > +                   #clock-cells = <1>;
> > +                   #reset-cells = <1>;
> > +
> > +                   soc1_rst: reset-controller@200 {
> > +                           #reset-cells = <1>;
> > +                   };
> > +
> > +                   soc1_clk: clock-controller@240 {
> > +                           reg = <0 0x240 0 0x1c0>;
> > +                   };
> > +           };
> > +
> > +           uart12: serial@14c33b00 {
> > +                   compatible = "ns16550a";
> > +                   reg = <0x0 0x14c33b00 0x0 0x100>;
> > +                   reg-shift = <2>;
> > +                   reg-io-width = <4>;
> > +                   clocks = <&syscon1 SCU1_CLK_GATE_UART12CLK>;
> > +                   no-loopback-test;
> > +                   pinctrl-names = "default";
>
> What is this?
BMC UART is used in uart12 in soc1.

>
> > +           };
> > +   };
> > +};
> > +
>
> Best regards,
> Krzysztof

--
Best Regards,
Kevin.Chen
************* Email Confidentiality Notice ********************
免責聲明:
本信件(或其附件)可能包含機密資訊,並受法律保護。如 台端非指定之收件者,請以電子郵件通知本電子郵件之發送者, 並請立即刪除本電子郵件及其附件和銷毀所有複印件。謝謝您的合作!

DISCLAIMER:
This message (and any attachments) may contain legally privileged and/or other confidential information. If you have received it in error, please notify the sender by reply e-mail and immediately delete the e-mail and any attachments without copying or disclosing the contents. Thank you.
Krzysztof Kozlowski Aug. 16, 2024, 5:08 a.m. UTC | #4
On 15/08/2024 07:50, Kevin Chen wrote:
>>> diff --git a/arch/arm64/boot/dts/aspeed/aspeed-g7.dtsi b/arch/arm64/boot/dts/aspeed/aspeed-g7.dtsi
>>> new file mode 100644
>>> index 000000000000..858ab95251e4
>>> --- /dev/null
>>> +++ b/arch/arm64/boot/dts/aspeed/aspeed-g7.dtsi
>>> @@ -0,0 +1,217 @@
>>> +// SPDX-License-Identifier: GPL-2.0-or-later
>>> +#include <dt-bindings/clock/aspeed,ast2700-clk.h>
>>> +#include <dt-bindings/reset/aspeed,ast2700-reset.h>
>>> +#include <dt-bindings/interrupt-controller/arm-gic.h>
>>> +#include <dt-bindings/interrupt-controller/aspeed-scu-ic.h>
>>> +
>>> +/ {
>>> +     model = "Aspeed BMC";
>>
>> Model of what? No, drop.
> Can I change to "model = "AST2700 EVB""

Model of what? No, it does not make sense here.


..


>>> +
>>> +             uart12: serial@14c33b00 {
>>> +                     compatible = "ns16550a";
>>> +                     reg = <0x0 0x14c33b00 0x0 0x100>;
>>> +                     reg-shift = <2>;
>>> +                     reg-io-width = <4>;
>>> +                     clocks = <&syscon1 SCU1_CLK_GATE_UART12CLK>;
>>> +                     no-loopback-test;
>>> +                     pinctrl-names = "default";
>>
>> What is this?
> BMC uart using in uart12 in soc1.

No, that line. pinctrl-names do not make sense here without values.

> 
>>
>>> +             };
>>> +     };
>>> +};
>>> +
> 
> --
> Best Regards,
> Kevin. Chen
> ________________________________
> 寄件者: Krzysztof Kozlowski <krzk@kernel.org>
> 寄件日期: 2024年7月26日 下午 07:19
> 收件者: Kevin Chen <kevin_chen@aspeedtech.com>; robh@kernel.org <robh@kernel.org>; krzk+dt@kernel.org <krzk+dt@kernel.org>; conor+dt@kernel.org <conor+dt@kernel.org>; joel@jms.id.au <joel@jms.id.au>; andrew@codeconstruct.com.au <andrew@codeconstruct.com.au>; lee@kernel.org <lee@kernel.org>; catalin.marinas@arm.com <catalin.marinas@arm.com>; will@kernel.org <will@kernel.org>; arnd@arndb.de <arnd@arndb.de>; olof@lixom.net <olof@lixom.net>; soc@kernel.org <soc@kernel.org>; mturquette@baylibre.com <mturquette@baylibre.com>; sboyd@kernel.org <sboyd@kernel.org>; p.zabel@pengutronix.de <p.zabel@pengutronix.de>; quic_bjorande@quicinc.com <quic_bjorande@quicinc.com>; geert+renesas@glider.be <geert+renesas@glider.be>; dmitry.baryshkov@linaro.org <dmitry.baryshkov@linaro.org>; shawnguo@kernel.org <shawnguo@kernel.org>; neil.armstrong@linaro.org <neil.armstrong@linaro.org>; m.szyprowski@samsung.com <m.szyprowski@samsung.com>; nfraprado@collabora.com <nfraprado@collabora.com>; u-kumar1@ti.com <u-kumar1@ti.com>; devicetree@vger.kernel.org <devicetree@vger.kernel.org>; linux-arm-kernel@lists.infradead.org <linux-arm-kernel@lists.infradead.org>; linux-aspeed@lists.ozlabs.org <linux-aspeed@lists.ozlabs.org>; linux-kernel@vger.kernel.org <linux-kernel@vger.kernel.org>; linux-clk@vger.kernel.org <linux-clk@vger.kernel.org>
> 主旨: Re: [PATCH v1 08/10] arm64: dts: aspeed: Add initial AST27XX device tree
> 

Why do you quote my email twice?


...

>> +             uart12: serial@14c33b00 {
>> +                     compatible = "ns16550a";
>> +                     reg = <0x0 0x14c33b00 0x0 0x100>;
>> +                     reg-shift = <2>;
>> +                     reg-io-width = <4>;
>> +                     clocks = <&syscon1 SCU1_CLK_GATE_UART12CLK>;
>> +                     no-loopback-test;
>> +                     pinctrl-names = "default";
> 
> What is this?
> 
>> +             };
>> +     };
>> +};
>> +
> 
> Best regards,
> Krzysztof
> 
> ************* Email Confidentiality Notice ********************
> 免責聲明:
> 本信件(或其附件)可能包含機密資訊,並受法律保護。如 台端非指定之收件者,請以電子郵件通知本電子郵件之發送者, 並請立即刪除本電子郵件及其附件和銷毀所有複印件。謝謝您的合作!
> 
> DISCLAIMER:
> This message (and any attachments) may contain legally privileged and/or other confidential information. If you have received it in error, please notify the sender by reply e-mail and immediately delete the e-mail and any attachments without copying or disclosing the contents. Thank you.

Maybe I am the intended recipient of your message, maybe not. I don't
want to have any legal questions regarding upstream, public
collaboration, thus probably I should just remove your messages.

Please talk with your IT that such disclaimers in open-source are not
desired (and maybe even harmful).
If you do not understand why, please also see:
https://www.youtube.com/live/fMeH7wqOwXA?si=GY7igfbda6vnjXlJ&t=835

If you need to go around company SMTP server, then consider using b4
web-relay: https://b4.docs.kernel.org/en/latest/contributor/send.html

Please be informed that by responding to this email you agree that all
communications from you and/or your company is made public. In other
words, all messages originating from you and/or your company will be
made public.

Best regards,
Krzysztof
Kevin Chen Oct. 7, 2024, 9:26 a.m. UTC | #5
> >>> diff --git a/arch/arm64/boot/dts/aspeed/aspeed-g7.dtsi
> >>> b/arch/arm64/boot/dts/aspeed/aspeed-g7.dtsi
> >>> new file mode 100644
> >>> index 000000000000..858ab95251e4
> >>> --- /dev/null
> >>> +++ b/arch/arm64/boot/dts/aspeed/aspeed-g7.dtsi
> >>> @@ -0,0 +1,217 @@
> >>> +// SPDX-License-Identifier: GPL-2.0-or-later #include
> >>> +<dt-bindings/clock/aspeed,ast2700-clk.h>
> >>> +#include <dt-bindings/reset/aspeed,ast2700-reset.h>
> >>> +#include <dt-bindings/interrupt-controller/arm-gic.h>
> >>> +#include <dt-bindings/interrupt-controller/aspeed-scu-ic.h>
> >>> +
> >>> +/ {
> >>> +     model = "Aspeed BMC";
> >>
> >> Model of what? No, drop.
> > Can I change to "model = "AST2700 EVB""
> 
> Model of what? No, it does not make sense here.
Should I change to model = "Aspeed BMC SoC";

> 
> 
> ..
> 
> 
> >>> +
> >>> +             uart12: serial@14c33b00 {
> >>> +                     compatible = "ns16550a";
> >>> +                     reg = <0x0 0x14c33b00 0x0 0x100>;
> >>> +                     reg-shift = <2>;
> >>> +                     reg-io-width = <4>;
> >>> +                     clocks = <&syscon1
> SCU1_CLK_GATE_UART12CLK>;
> >>> +                     no-loopback-test;
> >>> +                     pinctrl-names = "default";
> >>
> >> What is this?
> > BMC uart using in uart12 in soc1.
> 
> No, that line. pinctrl-names do not make sense here without values.
Agree, I will remove the line of pinctrl-names in next patch.
Pinctrl property needed to be defined in the future patches.

> 
> >
> >>
> >>> +             };
> >>> +     };
> >>> +};
> >>> +
> >
> > --
> > Best Regards,
> > Kevin. Chen
> >
> 
> Why do you quote my email twice?
> 
> 
> ...
> 
> >> +             uart12: serial@14c33b00 {
> >> +                     compatible = "ns16550a";
> >> +                     reg = <0x0 0x14c33b00 0x0 0x100>;
> >> +                     reg-shift = <2>;
> >> +                     reg-io-width = <4>;
> >> +                     clocks = <&syscon1
> SCU1_CLK_GATE_UART12CLK>;
> >> +                     no-loopback-test;
> >> +                     pinctrl-names = "default";
> >
> > What is this?
> >
> >> +             };
> >> +     };
> >> +};
> >> +
> >
> > Best regards,
> > Krzysztof
> >
> other confidential information. If you have received it in error, please notify the
> sender by reply e-mail and immediately delete the e-mail and any
> attachments without copying or disclosing the contents. Thank you.
> 
> Maybe I am the intended recipient of your message, maybe not. I don't want to
> have any legal questions regarding upstream, public collaboration, thus
> probably I should just remove your messages.
> 
> Please talk with your IT that such disclaimers in open-source are not desired
> (and maybe even harmful).
> If you do not understand why, please also see:
> https://www.youtube.com/live/fMeH7wqOwXA?si=GY7igfbda6vnjXlJ&t=835
> 
> If you need to go around company SMTP server, then consider using b4
> web-relay: https://b4.docs.kernel.org/en/latest/contributor/send.html
> 
> Please be informed that by responding to this email you agree that all
> communications from you and/or your company is made public. In other words,
> all messages originating from you and/or your company will be made public.
> 
> Best regards,
> Krzysztof
Krzysztof Kozlowski Oct. 7, 2024, 11:05 a.m. UTC | #6
On 07/10/2024 11:26, Kevin Chen wrote:
>>>>> diff --git a/arch/arm64/boot/dts/aspeed/aspeed-g7.dtsi
>>>>> b/arch/arm64/boot/dts/aspeed/aspeed-g7.dtsi
>>>>> new file mode 100644
>>>>> index 000000000000..858ab95251e4
>>>>> --- /dev/null
>>>>> +++ b/arch/arm64/boot/dts/aspeed/aspeed-g7.dtsi
>>>>> @@ -0,0 +1,217 @@
>>>>> +// SPDX-License-Identifier: GPL-2.0-or-later #include
>>>>> +<dt-bindings/clock/aspeed,ast2700-clk.h>
>>>>> +#include <dt-bindings/reset/aspeed,ast2700-reset.h>
>>>>> +#include <dt-bindings/interrupt-controller/arm-gic.h>
>>>>> +#include <dt-bindings/interrupt-controller/aspeed-scu-ic.h>
>>>>> +
>>>>> +/ {
>>>>> +     model = "Aspeed BMC";
>>>>
>>>> Model of what? No, drop.
>>> Can I change to "model = "AST2700 EVB""
>>
>> Model of what? No, it does not make sense here.
> Should I change to model = "Aspeed BMC SoC";

SoCs do not have models. Please take a look how *every* other SoC is doing.

Best regards,
Krzysztof
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/Makefile b/arch/arm64/boot/dts/Makefile
index 21cd3a87f385..c909c19dc5dd 100644
--- a/arch/arm64/boot/dts/Makefile
+++ b/arch/arm64/boot/dts/Makefile
@@ -34,3 +34,4 @@  subdir-y += tesla
 subdir-y += ti
 subdir-y += toshiba
 subdir-y += xilinx
+subdir-y += aspeed
diff --git a/arch/arm64/boot/dts/aspeed/aspeed-g7.dtsi b/arch/arm64/boot/dts/aspeed/aspeed-g7.dtsi
new file mode 100644
index 000000000000..858ab95251e4
--- /dev/null
+++ b/arch/arm64/boot/dts/aspeed/aspeed-g7.dtsi
@@ -0,0 +1,217 @@ 
+// SPDX-License-Identifier: GPL-2.0-or-later
+#include <dt-bindings/clock/aspeed,ast2700-clk.h>
+#include <dt-bindings/reset/aspeed,ast2700-reset.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/aspeed-scu-ic.h>
+
+/ {
+	model = "Aspeed BMC";
+	compatible = "aspeed,ast2700";
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&gic>;
+
+	aliases {
+		serial12 = &uart12;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			compatible = "arm,cortex-a35";
+			enable-method = "psci";
+			device_type = "cpu";
+			reg = <0>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			next-level-cache = <&l2>;
+		};
+
+		cpu@1 {
+			compatible = "arm,cortex-a35";
+			enable-method = "psci";
+			device_type = "cpu";
+			reg = <1>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			next-level-cache = <&l2>;
+		};
+
+		cpu@2 {
+			compatible = "arm,cortex-a35";
+			enable-method = "psci";
+			device_type = "cpu";
+			reg = <2>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			next-level-cache = <&l2>;
+		};
+
+		cpu@3 {
+			compatible = "arm,cortex-a35";
+			enable-method = "psci";
+			device_type = "cpu";
+			reg = <3>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			i-cache-size = <0x8000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			next-level-cache = <&l2>;
+		};
+
+		l2: l2-cache0 {
+			compatible = "cache";
+			cache-size = <0x80000>;
+			cache-line-size = <64>;
+			cache-sets = <1024>;
+			cache-level = <2>;
+		};
+	};
+
+	pmu {
+		compatible = "arm,cortex-a35-pmu";
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	gic: interrupt-controller@12200000 {
+		compatible = "arm,gic-v3";
+		interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
+		#interrupt-cells = <3>;
+		interrupt-controller;
+		interrupt-parent = <&gic>;
+		#redistributor-regions = <1>;
+		reg =	<0 0x12200000 0 0x10000>,		//GICD
+			<0 0x12280000 0 0x80000>,		//GICR
+			<0 0x40440000 0 0x1000>;		//GICC
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+				<GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+				<GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+				<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
+		arm,cpu-registers-not-fw-configured;
+		always-on;
+	};
+
+	soc0: soc@10000000 {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		soc0_sram: sram@10000000 {
+			compatible = "mmio-sram";
+			reg = <0x0 0x10000000 0x0 0x20000>;	/* 128KiB SRAM on soc0 */
+			ranges = <0x0 0x0 0x0 0x10000000 0x0 0x20000>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			no-memory-wc;
+
+			exported@0 {
+				reg = <0 0x0 0 0x20000>;
+				export;
+			};
+		};
+
+		syscon0: syscon@12c02000 {
+			compatible = "aspeed,ast2700-scu0", "syscon", "simple-mfd";
+			reg = <0x0 0x12c02000 0x0 0x1000>;
+			ranges = <0x0 0x0 0 0x12c02000 0 0x1000>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+
+			silicon-id@0 {
+				compatible = "aspeed,ast2700-silicon-id", "aspeed,silicon-id";
+				reg = <0 0x0 0 0x4>;
+			};
+
+			scu_ic0: interrupt-controller@1D0 {
+				#interrupt-cells = <1>;
+				compatible = "aspeed,ast2700-scu-ic0";
+				reg = <0 0x1d0 0 0xc>;
+				interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-controller;
+			};
+
+			scu_ic1: interrupt-controller@1E0 {
+				#interrupt-cells = <1>;
+				compatible = "aspeed,ast2700-scu-ic1";
+				reg = <0 0x1e0 0 0xc>;
+				interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-controller;
+			};
+
+			soc0_rst: reset-controller@200 {
+				reg = <0 0x200 0 0x40>;
+			};
+
+			soc0_clk: clock-controller@240 {
+				reg = <0 0x240 0 0x1c0>;
+			};
+		};
+
+	};
+
+	soc1: soc@14000000 {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		syscon1: syscon@14c02000 {
+			compatible = "aspeed,ast2700-scu1", "syscon", "simple-mfd";
+			reg = <0x0 0x14c02000 0x0 0x1000>;
+			ranges = <0x0 0x0 0x0 0x14c02000 0x0 0x1000>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+
+			soc1_rst: reset-controller@200 {
+				#reset-cells = <1>;
+			};
+
+			soc1_clk: clock-controller@240 {
+				reg = <0 0x240 0 0x1c0>;
+			};
+		};
+
+		uart12: serial@14c33b00 {
+			compatible = "ns16550a";
+			reg = <0x0 0x14c33b00 0x0 0x100>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&syscon1 SCU1_CLK_GATE_UART12CLK>;
+			no-loopback-test;
+			pinctrl-names = "default";
+		};
+	};
+};
+