diff mbox series

[leds,v6,04/12] leds: turris-omnia: Use global header for MCU command definitions

Message ID 20241108132845.31005-5-kabel@kernel.org (mailing list archive)
State New
Headers show
Series Turris Omnia LED driver changes | expand

Commit Message

Marek Behún Nov. 8, 2024, 1:28 p.m. UTC
The global turris-omnia-mcu-interface.h header file contains the
definitions for MCU commands. Drop the driver-internal definitions and
use the global ones.

Signed-off-by: Marek Behún <kabel@kernel.org>
---
 drivers/leds/leds-turris-omnia.c | 71 +++++++++++---------------------
 1 file changed, 23 insertions(+), 48 deletions(-)
diff mbox series

Patch

diff --git a/drivers/leds/leds-turris-omnia.c b/drivers/leds/leds-turris-omnia.c
index 00cd3bb86703..50fef4389c93 100644
--- a/drivers/leds/leds-turris-omnia.c
+++ b/drivers/leds/leds-turris-omnia.c
@@ -16,30 +16,8 @@ 
 #define OMNIA_BOARD_LEDS	12
 #define OMNIA_LED_NUM_CHANNELS	3
 
-/* MCU controller commands at I2C address 0x2a */
-#define OMNIA_MCU_I2C_ADDR		0x2a
-
-#define CMD_GET_STATUS_WORD		0x01
-#define STS_FEATURES_SUPPORTED		BIT(2)
-
-#define CMD_GET_FEATURES		0x10
-#define FEAT_LED_GAMMA_CORRECTION	BIT(5)
-
-/* LED controller commands at I2C address 0x2b */
-#define CMD_LED_MODE			0x03
-#define CMD_LED_MODE_LED(l)		((l) & 0x0f)
-#define CMD_LED_MODE_USER		0x10
-
-#define CMD_LED_STATE			0x04
-#define CMD_LED_STATE_LED(l)		((l) & 0x0f)
-#define CMD_LED_STATE_ON		0x10
-
-#define CMD_LED_COLOR			0x05
-#define CMD_LED_SET_BRIGHTNESS		0x07
-#define CMD_LED_GET_BRIGHTNESS		0x08
-
-#define CMD_SET_GAMMA_CORRECTION	0x30
-#define CMD_GET_GAMMA_CORRECTION	0x31
+/* MCU controller I2C address 0x2a, needed for detecting MCU features */
+#define OMNIA_MCU_I2C_ADDR	0x2a
 
 struct omnia_led {
 	struct led_classdev_mc mc_cdev;
@@ -60,7 +38,7 @@  struct omnia_leds {
 
 static int omnia_cmd_set_color(const struct i2c_client *client, u8 led, u8 r, u8 g, u8 b)
 {
-	u8 buf[5] = { CMD_LED_COLOR, led, r, g, b };
+	u8 buf[5] = { OMNIA_CMD_LED_COLOR, led, r, g, b };
 
 	return omnia_cmd_write(client, buf, sizeof(buf));
 }
@@ -127,12 +105,12 @@  static int omnia_led_brightness_set_blocking(struct led_classdev *cdev,
 	 * is not being blinked by HW.
 	 */
 	if (!err && !led->hwtrig && !brightness != !led->on) {
-		u8 state = CMD_LED_STATE_LED(led->reg);
+		u8 state = OMNIA_CMD_LED_STATE_LED(led->reg);
 
 		if (brightness)
-			state |= CMD_LED_STATE_ON;
+			state |= OMNIA_CMD_LED_STATE_ON;
 
-		err = omnia_cmd_write_u8(leds->client, CMD_LED_STATE, state);
+		err = omnia_cmd_write_u8(leds->client, OMNIA_CMD_LED_STATE, state);
 		if (!err)
 			led->on = !!brightness;
 	}
@@ -167,8 +145,8 @@  static int omnia_hwtrig_activate(struct led_classdev *cdev)
 
 	if (!err) {
 		/* Put the LED into MCU controlled mode */
-		err = omnia_cmd_write_u8(leds->client, CMD_LED_MODE,
-					 CMD_LED_MODE_LED(led->reg));
+		err = omnia_cmd_write_u8(leds->client, OMNIA_CMD_LED_MODE,
+					 OMNIA_CMD_LED_MODE_LED(led->reg));
 		if (!err)
 			led->hwtrig = true;
 	}
@@ -189,9 +167,8 @@  static void omnia_hwtrig_deactivate(struct led_classdev *cdev)
 	led->hwtrig = false;
 
 	/* Put the LED into software mode */
-	err = omnia_cmd_write_u8(leds->client, CMD_LED_MODE,
-				 CMD_LED_MODE_LED(led->reg) |
-				 CMD_LED_MODE_USER);
+	err = omnia_cmd_write_u8(leds->client, OMNIA_CMD_LED_MODE,
+				 OMNIA_CMD_LED_MODE_LED(led->reg) | OMNIA_CMD_LED_MODE_USER);
 
 	mutex_unlock(&leds->lock);
 
@@ -258,9 +235,8 @@  static int omnia_led_register(struct i2c_client *client, struct omnia_led *led,
 	cdev->default_trigger = omnia_hw_trigger.name;
 
 	/* put the LED into software mode */
-	ret = omnia_cmd_write_u8(client, CMD_LED_MODE,
-				 CMD_LED_MODE_LED(led->reg) |
-				 CMD_LED_MODE_USER);
+	ret = omnia_cmd_write_u8(client, OMNIA_CMD_LED_MODE, OMNIA_CMD_LED_MODE_LED(led->reg) |
+							     OMNIA_CMD_LED_MODE_USER);
 	if (ret) {
 		dev_err(dev, "Cannot set LED %pOF to software mode: %i\n", np,
 			ret);
@@ -268,8 +244,7 @@  static int omnia_led_register(struct i2c_client *client, struct omnia_led *led,
 	}
 
 	/* disable the LED */
-	ret = omnia_cmd_write_u8(client, CMD_LED_STATE,
-				 CMD_LED_STATE_LED(led->reg));
+	ret = omnia_cmd_write_u8(client, OMNIA_CMD_LED_STATE, OMNIA_CMD_LED_STATE_LED(led->reg));
 	if (ret) {
 		dev_err(dev, "Cannot set LED %pOF brightness: %i\n", np, ret);
 		return ret;
@@ -311,7 +286,7 @@  static ssize_t brightness_show(struct device *dev, struct device_attribute *a,
 	u8 reply;
 	int err;
 
-	err = omnia_cmd_read_u8(client, CMD_LED_GET_BRIGHTNESS, &reply);
+	err = omnia_cmd_read_u8(client, OMNIA_CMD_GET_BRIGHTNESS, &reply);
 	if (err < 0)
 		return err;
 
@@ -331,7 +306,7 @@  static ssize_t brightness_store(struct device *dev, struct device_attribute *a,
 	if (brightness > 100)
 		return -EINVAL;
 
-	err = omnia_cmd_write_u8(client, CMD_LED_SET_BRIGHTNESS, brightness);
+	err = omnia_cmd_write_u8(client, OMNIA_CMD_SET_BRIGHTNESS, brightness);
 
 	return err ?: count;
 }
@@ -346,7 +321,7 @@  static ssize_t gamma_correction_show(struct device *dev,
 	int err;
 
 	if (leds->has_gamma_correction) {
-		err = omnia_cmd_read_u8(client, CMD_GET_GAMMA_CORRECTION, &reply);
+		err = omnia_cmd_read_u8(client, OMNIA_CMD_GET_GAMMA_CORRECTION, &reply);
 		if (err < 0)
 			return err;
 	}
@@ -369,7 +344,7 @@  static ssize_t gamma_correction_store(struct device *dev,
 	if (kstrtobool(buf, &val) < 0)
 		return -EINVAL;
 
-	err = omnia_cmd_write_u8(client, CMD_SET_GAMMA_CORRECTION, val);
+	err = omnia_cmd_write_u8(client, OMNIA_CMD_SET_GAMMA_CORRECTION, val);
 
 	return err ?: count;
 }
@@ -387,15 +362,15 @@  static int omnia_mcu_get_features(const struct i2c_client *mcu_client)
 	u16 reply;
 	int err;
 
-	err = omnia_cmd_read_u16(mcu_client, CMD_GET_STATUS_WORD, &reply);
+	err = omnia_cmd_read_u16(mcu_client, OMNIA_CMD_GET_STATUS_WORD, &reply);
 	if (err)
 		return err;
 
-	/* Check whether MCU firmware supports the CMD_GET_FEAUTRES command */
-	if (!(reply & STS_FEATURES_SUPPORTED))
+	/* Check whether MCU firmware supports the OMNIA_CMD_GET_FEAUTRES command */
+	if (!(reply & OMNIA_STS_FEATURES_SUPPORTED))
 		return 0;
 
-	err = omnia_cmd_read_u16(mcu_client, CMD_GET_FEATURES, &reply);
+	err = omnia_cmd_read_u16(mcu_client, OMNIA_CMD_GET_FEATURES, &reply);
 	if (err)
 		return err;
 
@@ -460,7 +435,7 @@  static int omnia_leds_probe(struct i2c_client *client)
 		return ret;
 	}
 
-	leds->has_gamma_correction = ret & FEAT_LED_GAMMA_CORRECTION;
+	leds->has_gamma_correction = ret & OMNIA_FEAT_LED_GAMMA_CORRECTION;
 	if (!leds->has_gamma_correction) {
 		dev_info(dev,
 			 "Your board's MCU firmware does not support the LED gamma correction feature.\n");
@@ -491,7 +466,7 @@  static int omnia_leds_probe(struct i2c_client *client)
 static void omnia_leds_remove(struct i2c_client *client)
 {
 	/* put all LEDs into default (HW triggered) mode */
-	omnia_cmd_write_u8(client, CMD_LED_MODE, CMD_LED_MODE_LED(OMNIA_BOARD_LEDS));
+	omnia_cmd_write_u8(client, OMNIA_CMD_LED_MODE, OMNIA_CMD_LED_MODE_LED(OMNIA_BOARD_LEDS));
 
 	/* set all LEDs color to [255, 255, 255] */
 	omnia_cmd_set_color(client, OMNIA_BOARD_LEDS, 255, 255, 255);