| Message ID | 20250317215921.2031880-1-andersson@kernel.org (mailing list archive) |
|---|---|
| State | Changes Requested |
| Headers | show |
| Series | [GIT,PULL] Qualcomm Arm64 DeviceTree updates for v6.15 | expand |
On Mon, Mar 17, 2025, at 22:59, Bjorn Andersson wrote: > > Krzysztof Kozlowski (17): > arm64: dts: qcom: sa8775p: Partially revert "arm64: dts: qcom: > sa8775p: add QCrypto nodes" > arm64: dts: qcom: qcs8300: Partially revert "arm64: dts: qcom: > qcs8300: add QCrypto nodes" > arm64: dts: qcom: x1e80100-slim7x: Drop incorrect > qcom,ath12k-calibration-variant > arm64: dts: qcom: msm8998: Switch to undeprecated > qcom,calibration-variant > arm64: dts: qcom: qrb2210-rb1: Switch to undeprecated > qcom,calibration-variant > arm64: dts: qcom: qrb4210-rb2: Switch to undeprecated > qcom,calibration-variant > arm64: dts: qcom: sc7180: Switch to undeprecated > qcom,calibration-variant > arm64: dts: qcom: sdm845: Switch to undeprecated > qcom,calibration-variant > arm64: dts: qcom: sda660-ifc6560: Switch to undeprecated > qcom,calibration-variant > arm64: dts: qcom: sm6115: Switch to undeprecated > qcom,calibration-variant > arm64: dts: qcom: sm8150-hdk: Switch to undeprecated > qcom,calibration-variant > arm64: dts: qcom: qcm6490: Switch to undeprecated > qcom,calibration-variant > arm64: dts: qcom: sa8775p-ride: Switch to undeprecated > qcom,calibration-variant > arm64: dts: qcom: sc8280xp: Switch to undeprecated > qcom,calibration-variant > arm64: dts: qcom: sm8250-elish: Switch to undeprecated > qcom,calibration-variant This seeems to remove the properties that the drivers expect even in 6.14-rc7, so the branch is currently broken and I'll skip it for 6.15. Let's see how we should handle this properly in the next cycle, since it's too late now to fix it. Arnd
On 3/19/2025 2:10 PM, Arnd Bergmann wrote: > On Mon, Mar 17, 2025, at 22:59, Bjorn Andersson wrote: >> >> Krzysztof Kozlowski (17): >> arm64: dts: qcom: sa8775p: Partially revert "arm64: dts: qcom: >> sa8775p: add QCrypto nodes" >> arm64: dts: qcom: qcs8300: Partially revert "arm64: dts: qcom: >> qcs8300: add QCrypto nodes" >> arm64: dts: qcom: x1e80100-slim7x: Drop incorrect >> qcom,ath12k-calibration-variant >> arm64: dts: qcom: msm8998: Switch to undeprecated >> qcom,calibration-variant >> arm64: dts: qcom: qrb2210-rb1: Switch to undeprecated >> qcom,calibration-variant >> arm64: dts: qcom: qrb4210-rb2: Switch to undeprecated >> qcom,calibration-variant >> arm64: dts: qcom: sc7180: Switch to undeprecated >> qcom,calibration-variant >> arm64: dts: qcom: sdm845: Switch to undeprecated >> qcom,calibration-variant >> arm64: dts: qcom: sda660-ifc6560: Switch to undeprecated >> qcom,calibration-variant >> arm64: dts: qcom: sm6115: Switch to undeprecated >> qcom,calibration-variant >> arm64: dts: qcom: sm8150-hdk: Switch to undeprecated >> qcom,calibration-variant >> arm64: dts: qcom: qcm6490: Switch to undeprecated >> qcom,calibration-variant >> arm64: dts: qcom: sa8775p-ride: Switch to undeprecated >> qcom,calibration-variant >> arm64: dts: qcom: sc8280xp: Switch to undeprecated >> qcom,calibration-variant >> arm64: dts: qcom: sm8250-elish: Switch to undeprecated >> qcom,calibration-variant > > This seeems to remove the properties that the drivers expect > even in 6.14-rc7, so the branch is currently broken and I'll > skip it for 6.15. Let's see how we should handle this properly > in the next cycle, since it's too late now to fix it. > > Arnd > The driver changes are in wireless-next. +Johannes will you issue a wireless-next => net-next PR this week? Seems like there should be a way to orchestrate these into v6.15. /jeff
On 20/03/2025 01:27, Jeff Johnson wrote: > On 3/19/2025 2:10 PM, Arnd Bergmann wrote: >> On Mon, Mar 17, 2025, at 22:59, Bjorn Andersson wrote: >>> >>> Krzysztof Kozlowski (17): >>> arm64: dts: qcom: sa8775p: Partially revert "arm64: dts: qcom: >>> sa8775p: add QCrypto nodes" >>> arm64: dts: qcom: qcs8300: Partially revert "arm64: dts: qcom: >>> qcs8300: add QCrypto nodes" >>> arm64: dts: qcom: x1e80100-slim7x: Drop incorrect >>> qcom,ath12k-calibration-variant >>> arm64: dts: qcom: msm8998: Switch to undeprecated >>> qcom,calibration-variant >>> arm64: dts: qcom: qrb2210-rb1: Switch to undeprecated >>> qcom,calibration-variant >>> arm64: dts: qcom: qrb4210-rb2: Switch to undeprecated >>> qcom,calibration-variant >>> arm64: dts: qcom: sc7180: Switch to undeprecated >>> qcom,calibration-variant >>> arm64: dts: qcom: sdm845: Switch to undeprecated >>> qcom,calibration-variant >>> arm64: dts: qcom: sda660-ifc6560: Switch to undeprecated >>> qcom,calibration-variant >>> arm64: dts: qcom: sm6115: Switch to undeprecated >>> qcom,calibration-variant >>> arm64: dts: qcom: sm8150-hdk: Switch to undeprecated >>> qcom,calibration-variant >>> arm64: dts: qcom: qcm6490: Switch to undeprecated >>> qcom,calibration-variant >>> arm64: dts: qcom: sa8775p-ride: Switch to undeprecated >>> qcom,calibration-variant >>> arm64: dts: qcom: sc8280xp: Switch to undeprecated >>> qcom,calibration-variant >>> arm64: dts: qcom: sm8250-elish: Switch to undeprecated >>> qcom,calibration-variant >> >> This seeems to remove the properties that the drivers expect >> even in 6.14-rc7, so the branch is currently broken and I'll >> skip it for 6.15. Let's see how we should handle this properly >> in the next cycle, since it's too late now to fix it. >> >> Arnd >> > > The driver changes are in wireless-next. > +Johannes will you issue a wireless-next => net-next PR this week? > > Seems like there should be a way to orchestrate these into v6.15. It does not matter, it would not make history bisectable. Just like I explained in this patchset, it should wait for next cycle. Best regards, Krzysztof
On Wed, Mar 19, 2025 at 10:10:31PM +0100, Arnd Bergmann wrote: > On Mon, Mar 17, 2025, at 22:59, Bjorn Andersson wrote: > > > > Krzysztof Kozlowski (17): > > arm64: dts: qcom: sa8775p: Partially revert "arm64: dts: qcom: > > sa8775p: add QCrypto nodes" > > arm64: dts: qcom: qcs8300: Partially revert "arm64: dts: qcom: > > qcs8300: add QCrypto nodes" > > arm64: dts: qcom: x1e80100-slim7x: Drop incorrect > > qcom,ath12k-calibration-variant > > arm64: dts: qcom: msm8998: Switch to undeprecated > > qcom,calibration-variant > > arm64: dts: qcom: qrb2210-rb1: Switch to undeprecated > > qcom,calibration-variant > > arm64: dts: qcom: qrb4210-rb2: Switch to undeprecated > > qcom,calibration-variant > > arm64: dts: qcom: sc7180: Switch to undeprecated > > qcom,calibration-variant > > arm64: dts: qcom: sdm845: Switch to undeprecated > > qcom,calibration-variant > > arm64: dts: qcom: sda660-ifc6560: Switch to undeprecated > > qcom,calibration-variant > > arm64: dts: qcom: sm6115: Switch to undeprecated > > qcom,calibration-variant > > arm64: dts: qcom: sm8150-hdk: Switch to undeprecated > > qcom,calibration-variant > > arm64: dts: qcom: qcm6490: Switch to undeprecated > > qcom,calibration-variant > > arm64: dts: qcom: sa8775p-ride: Switch to undeprecated > > qcom,calibration-variant > > arm64: dts: qcom: sc8280xp: Switch to undeprecated > > qcom,calibration-variant > > arm64: dts: qcom: sm8250-elish: Switch to undeprecated > > qcom,calibration-variant > > This seeems to remove the properties that the drivers expect > even in 6.14-rc7, so the branch is currently broken and I'll > skip it for 6.15. Let's see how we should handle this properly > in the next cycle, since it's too late now to fix it. > Sorry about that. I didn't spot the comment(s) that these patches shouldn't be merged until v6.16. I think for this case it's okay not to provide more forwards compatibility than a single release, so picking them up then should be fine. Regards, Bjorn
The following changes since commit 2014c95afecee3e76ca4a56956a936e23283f05b: Linux 6.14-rc1 (2025-02-02 15:39:26 -0800) are available in the Git repository at: https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux.git tags/qcom-arm64-for-6.15 for you to fetch changes up to d09ab685a8f51ba412d37305ea62628a01cbea57: arm64: dts: qcom: x1e80100-qcp: Add WiFi/BT pwrseq (2025-03-03 22:54:17 -0600) ---------------------------------------------------------------- Qualcomm Arm64 DeviceTree updates for v6.15 The Snapdragon X Plus platform and the reference device is introduced. Tsens and thermal zones are added for IPQ5332 and IPQ5424. IPQ6018 gains 1.2GHz and 1.5GHz CPU frequencies. Display and GPU are enabled in the QCM6490-based Fairphone FP5. On QCS6490 Rb3Gen2 ADC channels for thermal profiling are added and Bluetooth is enabled. QCS615 platform gains command DB definition. The QCS8300 platform gains description of more QUP instances and the SPMI controller. On SDM630 missing resets are added for SDCC. Then on Fairphone FP3 modem is enabled, and firmware-path are defined on ADSP and WCNSS. The SDM845 RB3/DragonBoard845c and the QRB5165 RB5 has the sensors DSP enabled, and the vision mezzanine on both gets their CMA configuration cleaned up. On the SM7325 Nothing Phone (1) camera EEPROMs are described. For SM8550 OPP tables are described for PCIe and QUP. SM8750 gains RPMh sleep stats. SM8650 gians OSM L3 scaling and variety of OPP tables and missing interconnect definitions. The thermal trip points for CPU cores and GPU are raised in reliance on hardware throttling. A few more temp-alarm instances are added for the SC8280XP PMICs. On the X Elite platform GPU cooling and watchdog is introduced, together with a number of smaller fixes. Dell XPS13 gains support for USB Type-C display, the QCP gains WiFi/BT power sequence, and a few devices learns about HBR3. ---------------------------------------------------------------- Aleksandrs Vinarskis (4): arm64: dts: qcom: x1e80100-dell-xps13-9345: Enable external DP support arm64: dts: qcom: x1e001de-devkit: Enable HBR3 on external DPs arm64: dts: qcom: x1e80100-hp-x14: Enable HBR3 on external DPs arm64: dts: qcom: x1e80100-qcp: Enable HBR3 on external DPs Alexey Minnekhanov (2): dt-bindings: clock: gcc-sdm660: Add missing SDCC resets arm64: dts: qcom: sdm630: Add missing resets to mmc blocks Bjorn Andersson (1): Merge branch '20250203063427.358327-2-alexeymin@postmarketos.org' into arm64-for-6.15 Cheng Jiang (1): arm64: dts: qcom: sa8775p-ride: Add firmware-name in BT node Chukun Pan (5): arm64: dts: qcom: ipq6018: add 1.2GHz CPU Frequency arm64: dts: qcom: ipq6018: add 1.5GHz CPU Frequency arm64: dts: qcom: ipq6018: move mp5496 regulator out of soc dtsi arm64: dts: qcom: ipq6018: rename labels of mp5496 regulator arm64: dts: qcom: ipq6018: add LDOA2 regulator Danila Tikhonov (2): arm64: dts: qcom: sm7325-nothing-spacewar: Add CAM fixed-regulators arm64: dts: qcom: sm7325-nothing-spacewar: Enable camera EEPROMs Dmitry Baryshkov (2): arm64: dts: qcom: sdm845-db845c: enable sensors DSP arm64: dts: qcom: qrb5165-rb5: enable sensors DSP Janaki Ramaiah Thota (1): arm64: dts: qcom: qcs6490-rb3gen2: add and enable BT node Konrad Dybcio (5): arm64: dts: qcom: x1e80100: Set CPU interconnect paths as ACTIVE_ONLY arm64: dts: qcom: x1e80100: Wire up PCIe PHY NOCSR resets arm64: dts: qcom: Commonize X1 CRD DTSI arm64: dts: qcom: Add X1P42100 SoC and CRD arm64: dts: qcom: qcm6490-fairphone-fp5: Enable the GPU Krzysztof Kozlowski (17): arm64: dts: qcom: sa8775p: Partially revert "arm64: dts: qcom: sa8775p: add QCrypto nodes" arm64: dts: qcom: qcs8300: Partially revert "arm64: dts: qcom: qcs8300: add QCrypto nodes" arm64: dts: qcom: x1e80100-slim7x: Drop incorrect qcom,ath12k-calibration-variant arm64: dts: qcom: msm8998: Switch to undeprecated qcom,calibration-variant arm64: dts: qcom: qrb2210-rb1: Switch to undeprecated qcom,calibration-variant arm64: dts: qcom: qrb4210-rb2: Switch to undeprecated qcom,calibration-variant arm64: dts: qcom: sc7180: Switch to undeprecated qcom,calibration-variant arm64: dts: qcom: sdm845: Switch to undeprecated qcom,calibration-variant arm64: dts: qcom: sda660-ifc6560: Switch to undeprecated qcom,calibration-variant arm64: dts: qcom: sm6115: Switch to undeprecated qcom,calibration-variant arm64: dts: qcom: sm8150-hdk: Switch to undeprecated qcom,calibration-variant arm64: dts: qcom: qcm6490: Switch to undeprecated qcom,calibration-variant arm64: dts: qcom: sa8775p-ride: Switch to undeprecated qcom,calibration-variant arm64: dts: qcom: sc8280xp: Switch to undeprecated qcom,calibration-variant arm64: dts: qcom: sm8250-elish: Switch to undeprecated qcom,calibration-variant arm64: dts: qcom: sm8750: Change labels to lower-case arm64: dts: qcom: Correct white-space style Lijuan Gao (1): arm64: dts: qcom: qcs615: Add Command DB support Luca Weiss (5): arm64: dts: qcom: qcm6490-fairphone-fp5: Enable display arm64: dts: qcom: sdm632-fairphone-fp3: Move status properties last arm64: dts: qcom: sdm632-fairphone-fp3: Add newlines between regulator nodes arm64: dts: qcom: sdm632-fairphone-fp3: Add firmware-name for adsp & wcnss arm64: dts: qcom: sdm632-fairphone-fp3: Enable modem Manikanta Mylavarapu (2): arm64: dts: qcom: ipq5424: Add tsens node arm64: dts: qcom: ipq5424: Add thermal zone nodes Mark Kettenis (1): arm64: dts: qcom: x1e80100: Mark usb_2 as dma-coherent Maulik Shah (1): arm64: dts: qcom: sm8750: Add RPMh sleep stats Neil Armstrong (19): arm64: dts: qcom: sm8650: add OSM L3 node arm64: dts: qcom: sm8650: add cpu interconnect nodes arm64: dts: qcom: sm8650: add cpu OPP table with DDR, LLCC & L3 bandwidths arm64: dts: qcom: sm8650: drop cpu thermal passive trip points arm64: dts: qcom: sm8650: setup gpu thermal with higher temperatures arm64: dts: qcom: sm8650: harmonize all unregulated thermal trip points arm64: dts: qcom: sm8650: drop remaining polling-delay-passive properties arm64: dts: qcom: sm8550: use ICC tag for all interconnect phandles arm64: dts: qcom: sm8550: set CPU interconnect paths as ACTIVE_ONLY arm64: dts: qcom: sm8550: add OPP table support to PCIe arm64: dts: qcom: sm8550: add QUP serial engines OPP tables arm64: dts: qcom: sm8650: use ICC tag for IPA interconnect phandles arm64: dts: qcom: sm8650: set CPU interconnect paths as ACTIVE_ONLY arm64: dts: qcom: sm8650: add USB interconnect paths arm64: dts: qcom: sm8650: add OPP table support to PCIe arm64: dts: qcom: sm8650: add QUP serial engines OPP tables arm64: dts: qcom: sm8650: add UFS OPP table instead of freq-table-hz property arm64: dts: qcom: sm8550: add missing cpu-cfg interconnect path in the mdss node arm64: dts: qcom: sm8650: add missing cpu-cfg interconnect path in the mdss node Nikita Travkin (2): arm64: dts: qcom: qrb5165-rb5-vision-mezzanine: Drop CMA heap arm64: dts: qcom: sdm845-db845c-navigation-mezzanine: Drop CMA heap Pengyu Luo (3): arm64: dts: qcom: sc8280xp-pmics: Fix slave ID in interrupts configuration arm64: dts: qcom: sc8280xp-pmics: Add more temp-alarm devices arm64: dts: qcom: sc8280xp: Fix clock for spi0 to spi7 Praveenkumar I (2): arm64: dts: qcom: ipq5332: Add tsens node arm64: dts: qcom: ipq5332: Add thermal zone nodes Rajendra Nayak (1): arm64: dts: qcom: x1e80100: Add the watchdog device Rakesh Kota (1): arm64: dts: qcom: qcs6490-rb3gen2: Add vadc and adc-tm channels Stephan Gerhold (5): arm64: dts: qcom: x1e80100: Fix video thermal zone arm64: dts: qcom: x1e80100: Apply consistent critical thermal shutdown arm64: dts: qcom: x1e80100: Add GPU cooling arm64: dts: qcom: x1e80100: Drop unused passive thermal trip points for CPU arm64: dts: qcom: x1e80100-qcp: Add WiFi/BT pwrseq Tingguo Cheng (2): arm64: dts: qcom: qcs8300: Adds SPMI support arm64: dts: qcom: qcs8300-ride: Enable PMIC peripherals Viken Dadhaniya (1): arm64: dts: qcom: qcs8300: Add QUPv3 configuration Wojciech Slenska (1): arm64: dts: qcom: qcm2290: Add uart3 node arch/arm64/boot/dts/qcom/Makefile | 1 + arch/arm64/boot/dts/qcom/ipq5332.dtsi | 135 ++ arch/arm64/boot/dts/qcom/ipq5424.dtsi | 201 ++ arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dts | 2 +- arch/arm64/boot/dts/qcom/ipq6018-mp5496.dtsi | 44 + arch/arm64/boot/dts/qcom/ipq6018.dtsi | 28 +- arch/arm64/boot/dts/qcom/ipq9574.dtsi | 40 +- arch/arm64/boot/dts/qcom/msm8917-xiaomi-riva.dts | 2 +- arch/arm64/boot/dts/qcom/msm8917.dtsi | 2 +- .../boot/dts/qcom/msm8998-lenovo-miix-630.dts | 2 +- arch/arm64/boot/dts/qcom/qcm2290.dtsi | 24 + arch/arm64/boot/dts/qcom/qcm6490-fairphone-fp5.dts | 104 +- arch/arm64/boot/dts/qcom/qcm6490-idp.dts | 2 +- arch/arm64/boot/dts/qcom/qcm6490-shift-otter.dts | 2 +- arch/arm64/boot/dts/qcom/qcs615.dtsi | 22 +- arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts | 281 ++- arch/arm64/boot/dts/qcom/qcs8300-pmics.dtsi | 51 + arch/arm64/boot/dts/qcom/qcs8300-ride.dts | 1 + arch/arm64/boot/dts/qcom/qcs8300.dtsi | 2126 +++++++++++++++++-- arch/arm64/boot/dts/qcom/qrb2210-rb1.dts | 2 +- arch/arm64/boot/dts/qcom/qrb4210-rb2.dts | 2 +- .../dts/qcom/qrb5165-rb5-vision-mezzanine.dtso | 11 - arch/arm64/boot/dts/qcom/qrb5165-rb5.dts | 6 + arch/arm64/boot/dts/qcom/sa8775p-ride.dtsi | 3 +- arch/arm64/boot/dts/qcom/sa8775p.dtsi | 11 - .../boot/dts/qcom/sc7180-trogdor-homestar.dtsi | 2 +- .../boot/dts/qcom/sc7180-trogdor-kingoftown.dts | 2 +- arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor.dtsi | 2 +- .../boot/dts/qcom/sc7180-trogdor-pazquel360.dtsi | 2 +- .../arm64/boot/dts/qcom/sc7180-trogdor-pompom.dtsi | 2 +- .../boot/dts/qcom/sc7180-trogdor-wormdingler.dtsi | 2 +- arch/arm64/boot/dts/qcom/sc8280xp-crd.dts | 2 +- .../dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts | 2 +- .../boot/dts/qcom/sc8280xp-microsoft-arcata.dts | 2 +- .../boot/dts/qcom/sc8280xp-microsoft-blackrock.dts | 2 +- arch/arm64/boot/dts/qcom/sc8280xp-pmics.dtsi | 58 +- arch/arm64/boot/dts/qcom/sc8280xp.dtsi | 16 +- .../arm64/boot/dts/qcom/sda660-inforce-ifc6560.dts | 2 +- arch/arm64/boot/dts/qcom/sdm630.dtsi | 3 + arch/arm64/boot/dts/qcom/sdm632-fairphone-fp3.dts | 46 +- .../qcom/sdm845-db845c-navigation-mezzanine.dtso | 11 - arch/arm64/boot/dts/qcom/sdm845-db845c.dts | 8 +- arch/arm64/boot/dts/qcom/sdm845-mtp.dts | 2 +- .../boot/dts/qcom/sdm850-lenovo-yoga-c630.dts | 2 +- arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts | 2 +- arch/arm64/boot/dts/qcom/sm6115p-lenovo-j606f.dts | 2 +- .../boot/dts/qcom/sm7325-nothing-spacewar.dts | 157 +- arch/arm64/boot/dts/qcom/sm8150-hdk.dts | 2 +- .../boot/dts/qcom/sm8250-xiaomi-elish-common.dtsi | 2 +- arch/arm64/boot/dts/qcom/sm8550.dtsi | 602 ++++-- arch/arm64/boot/dts/qcom/sm8650.dtsi | 2152 +++++++++++++++----- arch/arm64/boot/dts/qcom/sm8750.dtsi | 13 +- arch/arm64/boot/dts/qcom/x1-crd.dtsi | 1275 ++++++++++++ arch/arm64/boot/dts/qcom/x1e001de-devkit.dts | 3 + arch/arm64/boot/dts/qcom/x1e80100-crd.dts | 1270 +----------- .../boot/dts/qcom/x1e80100-dell-xps13-9345.dts | 18 + .../boot/dts/qcom/x1e80100-hp-omnibook-x14.dts | 2 + .../boot/dts/qcom/x1e80100-lenovo-yoga-slim7x.dts | 2 - arch/arm64/boot/dts/qcom/x1e80100-pmics.dtsi | 2 +- arch/arm64/boot/dts/qcom/x1e80100-qcp.dts | 147 ++ arch/arm64/boot/dts/qcom/x1e80100.dtsi | 968 +++------ arch/arm64/boot/dts/qcom/x1p42100-crd.dts | 17 + arch/arm64/boot/dts/qcom/x1p42100.dtsi | 81 + include/dt-bindings/clock/qcom,gcc-sdm660.h | 2 + 64 files changed, 7152 insertions(+), 2840 deletions(-) create mode 100644 arch/arm64/boot/dts/qcom/ipq6018-mp5496.dtsi create mode 100644 arch/arm64/boot/dts/qcom/qcs8300-pmics.dtsi create mode 100644 arch/arm64/boot/dts/qcom/x1-crd.dtsi create mode 100644 arch/arm64/boot/dts/qcom/x1p42100-crd.dts create mode 100644 arch/arm64/boot/dts/qcom/x1p42100.dtsi