| Message ID | 396d51fc-81f3-4a2b-d7a7-b966bfe3002a@gmail.com (mailing list archive) |
|---|---|
| State | Accepted |
| Commit | 426082a214db267f44b3077c9e2cae9e1baaaa91 |
| Headers | show |
| Series | [GIT,PULL] soc: mediatek: updates for v6.3 | expand |
Hello: This pull request was applied to soc/soc.git (for-next) by Arnd Bergmann <arnd@arndb.de>: On Wed, 1 Feb 2023 19:21:27 +0100 you wrote: > Hi Arnd and Olof, > > Please see below for the list of updates to the MediaTek SoC drivers. Lost of > things have happened. > > We got support for MT8188 in the mutex, mmsys and power domain driver. Mutex and > mmsys now also support the MT8195. There were several improvements for the SVS > driver. Apart from that the PMIC wrapper binding finally was converted to yaml, > this included some PMIC patches, which hold the corresponding Acked-by tags. > > [...] Here is the summary with links: - [GIT,PULL] soc: mediatek: updates for v6.3 https://git.kernel.org/soc/soc/c/426082a214db You are awesome, thank you!
Hi Arnd and Olof, Please see below for the list of updates to the MediaTek SoC drivers. Lost of things have happened. We got support for MT8188 in the mutex, mmsys and power domain driver. Mutex and mmsys now also support the MT8195. There were several improvements for the SVS driver. Apart from that the PMIC wrapper binding finally was converted to yaml, this included some PMIC patches, which hold the corresponding Acked-by tags. Please have a look. Regards, Matthias --- The following changes since commit 1b929c02afd37871d5afb9d498426f83432e71c2: Linux 6.2-rc1 (2022-12-25 13:41:39 -0800) are available in the Git repository at: https://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux.git/ tags/v6.2-next-soc for you to fetch changes up to 6f42f5e73bb431c7e01c15dadfdc15872aa85db5: soc: mediatek: mtk-svs: add missing MODULE_DEVICE_TABLE (2023-02-01 14:35:12 +0100) ---------------------------------------------------------------- Introduce MediaTek regulator coupler driver to ensure that the SRAM voltage in par with the GPU voltage. This allows for a stable use of the GPU. mtk-mutex: - add support for MT8188 vdosys0 path - allow it to be build as module - add support for MT8195 vdosys1 path mmsys: - add MT8188 vdosys0 path - allow to be build as a module - add MT8195 vdosys1 path - add support for CMDQ - allow for up to 64 reset bits - add supprot for the MT8195 vppsys[0,1] pathes pm-domains: - keep power for the MT8186 ADSP on by default - add support for MT8188 - add support for buck isolation needed in specific pm-domains for MT8188 and MT8192 mtk-svs: - enable IRQ later to allow using kexec - several improvments on the code base - fix modalias pmic wrapper: - convert binding to yaml. As this is thightly coupled to the MT6357 PMIC, I took patches regarding it as well. ---------------------------------------------------------------- Alexandre Mergnat (2): dt-bindings: soc: mediatek: convert pwrap documentation dt-bindings: mfd: mediatek: Add bindings for MT6357 PMIC Allen-KH Cheng (2): soc: mediatek: pm-domains: Add buck isolation offset and mask to power domain data soc: mediatek: pm-domains: Add buck isolation setting in power domain AngeloGioacchino Del Regno (2): soc: mediatek: Introduce mediatek-regulator-coupler driver soc: mediatek: mtk-devapc: Switch to devm_clk_get_enabled() Fabien Parent (2): dt-bindings: input: mtk-pmic-keys: add binding for MT6357 PMIC Input: mtk-pmic-keys: add MT6357 support Garmin.Chang (2): dt-bindings: power: Add MT8188 power domains soc: mediatek: pm-domains: Add support for mt8188 Matthias Brugger (4): soc: mediatek: mtk-svs: clean up platform probing soc: mediatek: mtk-svs: improve readability of platform_probe soc: mediatek: mtk-svs: move svs_platform_probe into probe soc: mediatek: mtk-svs: delete superfluous platform data entries Moudy Ho (1): dt-bindings: arm: mediatek: mmsys: Add support for MT8195 VPPSYS Nancy.Lin (11): dt-bindings: arm: mediatek: mmsys: add vdosys1 compatible for MT8195 dt-bindings: reset: mt8195: add vdosys1 reset control bit soc: mediatek: add mtk-mmsys ethdr and mdp_rdma components soc: mediatek: add mtk-mmsys support for mt8195 vdosys1 soc: mediatek: refine code to use mtk_mmsys_update_bits API soc: mediatek: add mtk-mmsys config API for mt8195 vdosys1 soc: mediatek: add cmdq support of mtk-mmsys config API for mt8195 vdosys1 soc: mediatek: mmsys: add mmsys for support 64 reset bits soc: mediatek: mmsys: add reset control for MT8195 vdosys1 soc: mediatek: add mtk-mutex component - dp_intf1 soc: mediatek: add mtk-mutex support for mt8195 vdosys1 Nathan Lu (4): dt-bindings: mediatek: modify VDOSYS0 mmsys device tree Documentations for MT8188 dt-bindings: mediatek: modify VDOSYS0 mutex device tree Documentations for MT8188 soc: mediatek: add mtk-mmsys support for mt8188 vdosys0 soc: mediatek: add mtk-mutex support for mt8188 vdosys0 Ricardo Ribalda (1): soc: mediatek: mtk-svs: Enable the IRQ later Roger Lu (4): soc: mediatek: mtk-svs: restore default voltages when svs_init02() fail soc: mediatek: mtk-svs: reset svs when svs_resume() fail soc: mediatek: mtk-svs: keep svs alive if CONFIG_DEBUG_FS not supported soc: mtk-svs: mt8183: refactor o_slope calculation Roy-CW.Yeh (1): soc: mediatek: mmsys: add support for MT8195 VPPSYS Shang XiaoJing (1): soc: mediatek: mtk-svs: Use pm_runtime_resume_and_get() in svs_init01() Tinghan Shen (1): soc: mediatek: mtk-pm-domains: Allow mt8186 ADSP default power on Uwe Kleine-König (1): soc: mediatek: mutex: Drop empty platform remove function Yongqiang Niu (1): mtk-mmsys: Change mtk-mmsys & mtk-mutex to modules Zeng Heng (1): soc: mediatek: mtk-svs: add missing MODULE_DEVICE_TABLE .../bindings/arm/mediatek/mediatek,mmsys.yaml | 4 + .../bindings/input/mediatek,pmic-keys.yaml | 1 + .../devicetree/bindings/leds/leds-mt6323.txt | 2 +- .../devicetree/bindings/mfd/mediatek,mt6357.yaml | 111 ++++ Documentation/devicetree/bindings/mfd/mt6397.txt | 2 +- .../bindings/power/mediatek,power-controller.yaml | 2 + .../bindings/soc/mediatek/mediatek,mutex.yaml | 1 + .../bindings/soc/mediatek/mediatek,pwrap.yaml | 147 +++++ .../devicetree/bindings/soc/mediatek/pwrap.txt | 75 --- drivers/input/keyboard/mtk-pmic-keys.c | 17 + drivers/soc/mediatek/Kconfig | 7 +- drivers/soc/mediatek/Makefile | 1 + drivers/soc/mediatek/mt8186-pm-domains.h | 4 +- drivers/soc/mediatek/mt8188-mmsys.h | 149 +++++ drivers/soc/mediatek/mt8188-pm-domains.h | 623 +++++++++++++++++++++ drivers/soc/mediatek/mt8195-mmsys.h | 146 +++++ drivers/soc/mediatek/mtk-devapc.c | 11 +- drivers/soc/mediatek/mtk-mmsys.c | 200 +++++-- drivers/soc/mediatek/mtk-mmsys.h | 2 + drivers/soc/mediatek/mtk-mutex.c | 113 +++- drivers/soc/mediatek/mtk-pm-domains.c | 13 + drivers/soc/mediatek/mtk-pm-domains.h | 5 + drivers/soc/mediatek/mtk-regulator-coupler.c | 159 ++++++ drivers/soc/mediatek/mtk-svs.c | 155 ++--- include/dt-bindings/power/mediatek,mt8188-power.h | 44 ++ include/dt-bindings/reset/mt8195-resets.h | 45 ++ include/linux/soc/mediatek/infracfg.h | 121 ++++ include/linux/soc/mediatek/mtk-mmsys.h | 25 + 28 files changed, 1975 insertions(+), 210 deletions(-) create mode 100644 Documentation/devicetree/bindings/mfd/mediatek,mt6357.yaml create mode 100644 Documentation/devicetree/bindings/soc/mediatek/mediatek,pwrap.yaml delete mode 100644 Documentation/devicetree/bindings/soc/mediatek/pwrap.txt create mode 100644 drivers/soc/mediatek/mt8188-mmsys.h create mode 100644 drivers/soc/mediatek/mt8188-pm-domains.h create mode 100644 drivers/soc/mediatek/mtk-regulator-coupler.c create mode 100644 include/dt-bindings/power/mediatek,mt8188-power.h