mbox series

[GIT,PULL] Allwinner Device Tree Changes for 5.11

Message ID 551fdf4f-8a0b-4a22-ba49-b4f61520a9ab.lettre@localhost (mailing list archive)
State Mainlined, archived
Commit 036b7334ee6dc10115fbaebd8b04c9e4a17eccb2
Headers show
Series [GIT,PULL] Allwinner Device Tree Changes for 5.11 | expand

Pull-request

https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux.git refs/tags/sunxi-dt-for-5.11

Message

Maxime Ripard Nov. 28, 2020, 11:28 a.m. UTC
Hi Arnd, Olof,

Please pull the following changes for the next release.

Thanks!
Maxime

The following changes since commit 3650b228f83adda7e5ee532e2b90429c03f7b9ec:

  Linux 5.10-rc1 (2020-10-25 15:14:11 -0700)

are available in the Git repository at:

  https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux.git refs/tags/sunxi-dt-for-5.11

for you to fetch changes up to 036b7334ee6dc10115fbaebd8b04c9e4a17eccb2:

  ARM: dts: sun8i-h2-plus-bananapi-m2-zero: add gpio-line-names (2020-11-24 15:24:59 +0100)

----------------------------------------------------------------
Our usual bunch of patches to support the Allwinner SoCs, this time
adding:
  - Some nice pinephone additions
  - I2S support for the A64, H3, H5 and H6
  - New boards: Elimo Impetus, Elimo Initium, FriendlyArm ZeroPi, NanoPi R1

----------------------------------------------------------------
Jernej Skrabec (2):
      arm64: dts: allwinner: h6: PineH64 model B: Add wifi
      arm64: dts: allwinner: h6: Add I2S1 node

Luca Weiss (1):
      arm64: dts: allwinner: pinephone: Add LED flash

Marcus Cooper (2):
      arm64: dts: allwinner: a64: Add I2S2 node
      arm: dts: sunxi: h3/h5: Add I2S2 node

Matteo Scordino (5):
      dt-bindings: vendors: add Elimo Engineering vendor prefix
      ARM: dts: sun8i: V3/S3: Add UART1 pin definitions to the V3/S3 dtsi
      ARM: dts: sun8i: s3: Add dtsi for the Elimo Impetus SoM
      dt-bindings: arm: sunxi: add Elimo bindings
      ARM: dts: sun8i: s3: Add dts for the Elimo Initium SBC

Michael Klein (1):
      ARM: dts: sun8i-h2-plus-bananapi-m2-zero: add gpio-line-names

Ondrej Jirman (3):
      arm64: dts: allwinner: pinephone: Add light/proximity sensor
      arm64: dts: allwinner: pinephone: Add WiFi support
      arm64: dts: allwinner: pinephone: Add Bluetooth support

Paul Kocialkowski (1):
      ARM: dts: sun8i-v3s: Add I2C1 PB pins description

Samuel Holland (3):
      arm64: dts: allwinner: pinephone: Remove AC power supply
      arm64: dts: allwinner: pinephone: Set ALDO3 to exactly 3v0
      arm64: dts: allwinner: pinephone: Use generic sensor node names

Serge Semin (1):
      arm64: dts: allwinner: h6: Harmonize DWC USB3 DT nodes name

Yu-Tung Chang (2):
      ARM: dts: sun8i: add FriendlyArm ZeroPi support
      ARM: dts: sun8i: h3: Add initial NanoPi R1 support


 Documentation/devicetree/bindings/arm/sunxi.yaml             |  23 ++-
 Documentation/devicetree/bindings/vendor-prefixes.yaml       |   2 +-
 arch/arm/boot/dts/Makefile                                   |   3 +-
 arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts         |  64 +++++-
 arch/arm/boot/dts/sun8i-h3-nanopi-r1.dts                     | 169 ++++++++++++-
 arch/arm/boot/dts/sun8i-h3-zeropi.dts                        |  85 ++++++-
 arch/arm/boot/dts/sun8i-s3-elimo-impetus.dtsi                |  44 +++-
 arch/arm/boot/dts/sun8i-s3-elimo-initium.dts                 |  29 ++-
 arch/arm/boot/dts/sun8i-v3.dtsi                              |   5 +-
 arch/arm/boot/dts/sun8i-v3s.dtsi                             |   6 +-
 arch/arm/boot/dts/sunxi-h3-h5.dtsi                           |  13 +-
 arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone-1.0.dts   |   5 +-
 arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone-1.1.dts   |   5 +-
 arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone-1.2.dts   |  14 +-
 arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi      |  68 ++++-
 arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi                |  14 +-
 arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64-model-b.dts |  15 +-
 arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi                 |  15 +-
 18 files changed, 570 insertions(+), 9 deletions(-)
 create mode 100644 arch/arm/boot/dts/sun8i-h3-nanopi-r1.dts
 create mode 100644 arch/arm/boot/dts/sun8i-h3-zeropi.dts
 create mode 100644 arch/arm/boot/dts/sun8i-s3-elimo-impetus.dtsi
 create mode 100644 arch/arm/boot/dts/sun8i-s3-elimo-initium.dts

Comments

Arnd Bergmann Dec. 8, 2020, 11:09 p.m. UTC | #1
From: Arnd Bergmann <arnd@arndb.de>

On Sat, 28 Nov 2020 12:28:03 +0100, Maxime Ripard wrote:
> Please pull the following changes for the next release.
> 
> Thanks!
> Maxime
> 
> The following changes since commit 3650b228f83adda7e5ee532e2b90429c03f7b9ec:
> 
>   Linux 5.10-rc1 (2020-10-25 15:14:11 -0700)
> 
> [...]

Merged into arm/dt, thanks!

merge commit: 915a39191503359531fd92339bfe74ca3defe271

       Arnd