mbox series

[GIT,PULL] Allwinner device tree changes for 6.3

Message ID Y9Raak4mhdtL0L8e@jernej-laptop (mailing list archive)
State Accepted
Commit ffe4bd3db832a36b69a764d3895e34c726f4f3cf
Headers show
Series [GIT,PULL] Allwinner device tree changes for 6.3 | expand

Pull-request

https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux.git tags/sunxi-dt-for-6.3-1

Message

Jernej Skrabec Jan. 27, 2023, 11:12 p.m. UTC
Hi!

Please pull following device tree changes for 6.3. Note that this PR
depends on following immutable tag:

https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux.git soc2arch-immutable

Let me know if I should split this PR into two, one for ARM and another
for RISC-V.

Best regards,
Jernej

The following changes since commit 3af577f9826fdddefac42b35fc5eb3912c5b7d85:

  RISC-V: stop directly selecting drivers for SOC_CANAAN (2022-12-27 18:01:40 +0000)

are available in the Git repository at:

  https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux.git tags/sunxi-dt-for-6.3-1

for you to fetch changes up to dca36f7b3dd7eb574f0958484d3d21cfd8af2651:

  riscv: dts: allwinner: d1: Add power controller node (2023-01-27 23:21:06 +0100)

----------------------------------------------------------------
- introduce Allwinner D1 DTSI
- add boards: Dongshan Nezha STU, MangoPi MQ (Pro), Sipeed Lichee RV,
  Nezha
- add D1 power controller node
- Add SATA regulator to Bananapi M3
- fix regulator reference for nanopi-duo2
- fix GPIO node names
- align HDMI CEC node name for h3-beelink-x2
- add DPHY interrupt to A64 and A33

----------------------------------------------------------------
Andre Przywara (1):
      ARM: dts: sun8i: a83t: bananapi-m3: describe SATA disk regulator

Krzysztof Kozlowski (1):
      ARM: dts: sun8i: h3-beelink-x2: align HDMI CEC node names with dtschema

Samuel Holland (15):
      ARM: dts: sun8i: a33: Add DPHY interrupt
      arm64: dts: allwinner: a64: Add DPHY interrupt
      ARM: dts: sunxi: Fix GPIO LED node names
      ARM: dts: sun8i: nanopi-duo2: Fix regulator GPIO reference
      MAINTAINERS: Match the sun20i family of Allwinner SoCs
      dt-bindings: vendor-prefixes: Add Allwinner D1/D1s board vendors
      dt-bindings: riscv: Add Allwinner D1/D1s board compatibles
      riscv: dts: allwinner: Add the D1/D1s SoC devicetree
      riscv: dts: allwinner: Add MangoPi MQ devicetree
      riscv: dts: allwinner: Add Allwinner D1 Nezha devicetree
      riscv: dts: allwinner: Add Sipeed Lichee RV devicetrees
      riscv: dts: allwinner: Add MangoPi MQ Pro devicetree
      riscv: dts: allwinner: Add Dongshan Nezha STU devicetree
      riscv: Add the Allwinner SoC family Kconfig option
      riscv: dts: allwinner: d1: Add power controller node

 Documentation/devicetree/bindings/riscv/sunxi.yaml |  69 ++
 .../devicetree/bindings/vendor-prefixes.yaml       |   4 +
 MAINTAINERS                                        |   2 +-
 arch/arm/boot/dts/sun5i-gr8-chip-pro.dts           |   2 +-
 arch/arm/boot/dts/sun5i-r8-chip.dts                |   2 +-
 arch/arm/boot/dts/sun6i-a31s-sina31s.dts           |   2 +-
 arch/arm/boot/dts/sun8i-a33.dtsi                   |   1 +
 arch/arm/boot/dts/sun8i-a83t-bananapi-m3.dts       |  15 +
 arch/arm/boot/dts/sun8i-h3-beelink-x2.dts          |   2 +-
 arch/arm/boot/dts/sun8i-h3-nanopi-duo2.dts         |   2 +-
 arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi      |   1 +
 arch/riscv/Kconfig.socs                            |   9 +
 arch/riscv/boot/dts/Makefile                       |   1 +
 arch/riscv/boot/dts/allwinner/Makefile             |   9 +
 .../dts/allwinner/sun20i-common-regulators.dtsi    |  28 +
 .../dts/allwinner/sun20i-d1-dongshan-nezha-stu.dts | 117 +++
 .../sun20i-d1-lichee-rv-86-panel-480p.dts          |  29 +
 .../sun20i-d1-lichee-rv-86-panel-720p.dts          |  10 +
 .../allwinner/sun20i-d1-lichee-rv-86-panel.dtsi    | 119 +++
 .../dts/allwinner/sun20i-d1-lichee-rv-dock.dts     |  97 +++
 .../boot/dts/allwinner/sun20i-d1-lichee-rv.dts     |  87 +++
 .../dts/allwinner/sun20i-d1-mangopi-mq-pro.dts     | 142 ++++
 arch/riscv/boot/dts/allwinner/sun20i-d1-nezha.dts  | 166 ++++
 arch/riscv/boot/dts/allwinner/sun20i-d1.dtsi       |  66 ++
 .../boot/dts/allwinner/sun20i-d1s-mangopi-mq.dts   | 128 ++++
 arch/riscv/boot/dts/allwinner/sun20i-d1s.dtsi      |  76 ++
 arch/riscv/boot/dts/allwinner/sunxi-d1-t113.dtsi   |  15 +
 arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi  | 834 +++++++++++++++++++++
 28 files changed, 2029 insertions(+), 6 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/riscv/sunxi.yaml
 create mode 100644 arch/riscv/boot/dts/allwinner/Makefile
 create mode 100644 arch/riscv/boot/dts/allwinner/sun20i-common-regulators.dtsi
 create mode 100644 arch/riscv/boot/dts/allwinner/sun20i-d1-dongshan-nezha-stu.dts
 create mode 100644 arch/riscv/boot/dts/allwinner/sun20i-d1-lichee-rv-86-panel-480p.dts
 create mode 100644 arch/riscv/boot/dts/allwinner/sun20i-d1-lichee-rv-86-panel-720p.dts
 create mode 100644 arch/riscv/boot/dts/allwinner/sun20i-d1-lichee-rv-86-panel.dtsi
 create mode 100644 arch/riscv/boot/dts/allwinner/sun20i-d1-lichee-rv-dock.dts
 create mode 100644 arch/riscv/boot/dts/allwinner/sun20i-d1-lichee-rv.dts
 create mode 100644 arch/riscv/boot/dts/allwinner/sun20i-d1-mangopi-mq-pro.dts
 create mode 100644 arch/riscv/boot/dts/allwinner/sun20i-d1-nezha.dts
 create mode 100644 arch/riscv/boot/dts/allwinner/sun20i-d1.dtsi
 create mode 100644 arch/riscv/boot/dts/allwinner/sun20i-d1s-mangopi-mq.dts
 create mode 100644 arch/riscv/boot/dts/allwinner/sun20i-d1s.dtsi
 create mode 100644 arch/riscv/boot/dts/allwinner/sunxi-d1-t113.dtsi
 create mode 100644 arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi

Comments

Arnd Bergmann Jan. 30, 2023, 5:19 p.m. UTC | #1
On Sat, Jan 28, 2023, at 00:12, Jernej Skrabec wrote:
> Hi!
>
> Please pull following device tree changes for 6.3. Note that this PR
> depends on following immutable tag:
>
> https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux.git 
> soc2arch-immutable
>
> Let me know if I should split this PR into two, one for ARM and another
> for RISC-V.
>
> Best regards,
> Jernej
>
> The following changes since commit 3af577f9826fdddefac42b35fc5eb3912c5b7d85:
>
>   RISC-V: stop directly selecting drivers for SOC_CANAAN (2022-12-27 
> 18:01:40 +0000)
>
> are available in the Git repository at:
>
>   https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux.git 
> tags/sunxi-dt-for-6.3-1
>
> for you to fetch changes up to dca36f7b3dd7eb574f0958484d3d21cfd8af2651:
>
>   riscv: dts: allwinner: d1: Add power controller node (2023-01-27 
> 23:21:06 +0100)

Something looks wrong here, I get an error when pulling this:

ERROR: commit-id mismatch between pull request and remote
       msg=dca36f7b3dd7eb574f0958484d3d21cfd8af2651, remote=3af577f9826fdddefac42b35fc5eb3912c5b7d85
Topmost hash is not the same. Expected dca36f7b3dd7eb574f0958484d3d21cfd8af2651

Can you check what happened and then either push the correct branch
or send a new pull request, depending on which one has the intended
commit?

     Arnd
Arnd Bergmann Jan. 30, 2023, 5:24 p.m. UTC | #2
On Mon, Jan 30, 2023, at 18:19, Arnd Bergmann wrote:
> On Sat, Jan 28, 2023, at 00:12, Jernej Skrabec wrote:
>> Hi!
>>
>> Please pull following device tree changes for 6.3. Note that this PR
>> depends on following immutable tag:
>>
>> https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux.git 
>> soc2arch-immutable
>>
>> Let me know if I should split this PR into two, one for ARM and another
>> for RISC-V.
>>
>> Best regards,
>> Jernej
>>
>> The following changes since commit 3af577f9826fdddefac42b35fc5eb3912c5b7d85:
>>
>>   RISC-V: stop directly selecting drivers for SOC_CANAAN (2022-12-27 
>> 18:01:40 +0000)
>>
>> are available in the Git repository at:
>>
>>   https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux.git 
>> tags/sunxi-dt-for-6.3-1
>>
>> for you to fetch changes up to dca36f7b3dd7eb574f0958484d3d21cfd8af2651:
>>
>>   riscv: dts: allwinner: d1: Add power controller node (2023-01-27 
>> 23:21:06 +0100)
>
> Something looks wrong here, I get an error when pulling this:
>
> ERROR: commit-id mismatch between pull request and remote
>        msg=dca36f7b3dd7eb574f0958484d3d21cfd8af2651, 
> remote=3af577f9826fdddefac42b35fc5eb3912c5b7d85
> Topmost hash is not the same. Expected 
> dca36f7b3dd7eb574f0958484d3d21cfd8af2651
>
> Can you check what happened and then either push the correct branch
> or send a new pull request, depending on which one has the intended
> commit?

nevermind, I see what happened: the script parsed the pull
request incorrectly and tried to pull the soc2arch-immutable
tag instead of your tags/sunxi-dt-for-6.3-1 tag.

I can handle that here and fix it up then, it's not your fault.

Combining the risc-v and arm bits is fine as long as this makes
sense as a branch overall. If you have too many different things
in one branch, it makes sense to split it up along some boundary,
but that does not have to be between architectures, just based
on what makes the most sensible changelog text in each pull
request.

     Arnd
patchwork-bot+linux-soc@kernel.org Jan. 30, 2023, 10:31 p.m. UTC | #3
Hello:

This pull request was applied to soc/soc.git (for-next)
by Arnd Bergmann <arnd@arndb.de>:

On Sat, 28 Jan 2023 00:12:42 +0100 you wrote:
> Hi!
> 
> Please pull following device tree changes for 6.3. Note that this PR
> depends on following immutable tag:
> 
> https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux.git soc2arch-immutable
> 
> [...]

Here is the summary with links:
  - [GIT,PULL] Allwinner device tree changes for 6.3
    https://git.kernel.org/soc/soc/c/ffe4bd3db832

You are awesome, thank you!