[GIT,PULL] Allwinner Device Tree Changes for 5.10, take 2

Message ID	e7c12b59-8603-438d-908b-5f0bde2c8697.lettre@localhost (mailing list archive)
State	Accepted
Commit	e27312539a393be3b38ae0112d4f72877db00f76
Headers	show Return-Path: <mripard@kernel.org> Date: Mon, 28 Sep 2020 13:34:33 +0200 From: Maxime Ripard <mripard@kernel.org> To: arm@kernel.org, soc@kernel.org Cc: Maxime Ripard <mripard@kernel.org>, linux-arm-kernel@lists.infradead.org, Chen-Yu Tsai <wens@csie.org> Subject: [GIT PULL] Allwinner Device Tree Changes for 5.10, take 2 Message-ID: <e7c12b59-8603-438d-908b-5f0bde2c8697.lettre@localhost> MIME-Version: 1.0 Content-Type: multipart/signed; micalg=pgp-sha256; protocol="application/pgp-signature"; boundary="ReaqsoxgOBHFXBhH" Content-Disposition: inline
Series	[GIT,PULL] Allwinner Device Tree Changes for 5.10, take 2 \| expand [GIT,PULL] Allwinner Device Tree Changes for 5.10, take 2

Message ID

e7c12b59-8603-438d-908b-5f0bde2c8697.lettre@localhost (mailing list archive)

State

Accepted

Commit

e27312539a393be3b38ae0112d4f72877db00f76

Headers

Date: Mon, 28 Sep 2020 13:34:33 +0200
From: Maxime Ripard <mripard@kernel.org>
To: arm@kernel.org, soc@kernel.org
Cc: Maxime Ripard <mripard@kernel.org>,
	linux-arm-kernel@lists.infradead.org, Chen-Yu Tsai <wens@csie.org>
Subject: [GIT PULL] Allwinner Device Tree Changes for 5.10, take 2
Message-ID: <e7c12b59-8603-438d-908b-5f0bde2c8697.lettre@localhost>
MIME-Version: 1.0
Content-Type: multipart/signed; micalg=pgp-sha256;
	protocol="application/pgp-signature"; boundary="ReaqsoxgOBHFXBhH"
Content-Disposition: inline

Series

[GIT,PULL] Allwinner Device Tree Changes for 5.10, take 2 | expand

Message

Maxime Ripard Sept. 28, 2020, 11:34 a.m. UTC

Hi,

Since we get a little extra delay, here's a few extra patches for 5.10 

Thanks!
Maxime

The following changes since commit 96820e359e25c7a61c4c8b994745aaa9d9db6a5e:

  ARM: dts: sun8i: v3s: Enable crypto engine (2020-09-17 18:37:32 +0200)

are available in the Git repository at:

  https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux.git refs/tags/sunxi-dt-for-5.10-2

for you to fetch changes up to 2bd5298af55cfd725f13ff853adcee4d117532cd:

  ARM: dts: sun8i: v3s: Add simple-framebuffer (2020-09-28 13:25:27 +0200)

----------------------------------------------------------------
A few more DT patches for 5.10, to support simple-framebuffer on the v3s
and the pinecube board
-----BEGIN PGP SIGNATURE-----

iHUEABYIAB0WIQRcEzekXsqa64kGDp7j7w1vZxhRxQUCX3HKAwAKCRDj7w1vZxhR
xc3bAQCcnys+hZ4XtwA/GIT10zcvpBVkUrjU56zZPG9WiEA9AgD/S9PN5m6J0R7O
F8dU+0Xx8O+3KNwIhuqEw2Mj7WHpcwE=
=6hIV
-----END PGP SIGNATURE-----

----------------------------------------------------------------
Icenowy Zheng (7):
      ARM: dts: sun8i: V3/V3s/S3/S3L: add Ethernet support
      ARM: dts: sun8i: V3/V3s/S3/S3L: add pinctrl for UART2 RX/TX
      ARM: dts: sun8i: V3/V3s/S3/S3L: add CSI1 device node
      ARM: dts: sun8i: V3/V3s/S3/S3L: add pinctrl for 8-bit parallel CSI
      ARM: dts: sun8i: V3/V3s/S3/S3L: add pinctrl for I2C1 at PE bank
      dt-bindings: arm: sunxi: add Pine64 PineCube binding
      ARM: dts: sun8i: s3l: add support for Pine64 PineCube IP camera

Martin Cerveny (1):
      ARM: dts: sun8i: v3s: Add simple-framebuffer


 Documentation/devicetree/bindings/arm/sunxi.yaml |   5 +-
 arch/arm/boot/dts/Makefile                       |   1 +-
 arch/arm/boot/dts/sun8i-s3-pinecube.dts          | 235 ++++++++++++++++++++++++-
 arch/arm/boot/dts/sun8i-v3.dtsi                  |  13 +-
 arch/arm/boot/dts/sun8i-v3s.dtsi                 | 107 +++++++++++-
 5 files changed, 361 insertions(+)
 create mode 100644 arch/arm/boot/dts/sun8i-s3-pinecube.dts

[GIT,PULL] Allwinner Device Tree Changes for 5.10, take 2

Pull-request

Message