Show patches with: Submitter = Xu Yang       |    State = Action Required       |   47 patches
Patch Series A/R/T S/W/F Date Submitter Delegate State
[v2] dt-bindings: phy: imx8mq-usb: correct reference to usb-switch.yaml [v2] dt-bindings: phy: imx8mq-usb: correct reference to usb-switch.yaml 1 - - --- 2024-11-19 Xu Yang New
[v10,3/3] arm64: dts: imx95-19x19-evk: add typec nodes and enable usb3 node [v10,1/3] phy: fsl-imx8mq-usb: add tca function driver for imx95 - - - --- 2024-11-15 Xu Yang New
[v10,2/3] arm64: dts: imx95: add usb3 related nodes [v10,1/3] phy: fsl-imx8mq-usb: add tca function driver for imx95 - - - --- 2024-11-15 Xu Yang New
[v10,1/3] phy: fsl-imx8mq-usb: add tca function driver for imx95 [v10,1/3] phy: fsl-imx8mq-usb: add tca function driver for imx95 - 1 - --- 2024-11-15 Xu Yang New
dt-bindings: phy: imx8mq-usb: optionally refer to usb-switch.yaml dt-bindings: phy: imx8mq-usb: optionally refer to usb-switch.yaml - - - --- 2024-11-14 Xu Yang New
usb: core: hcd: only check primary hcd skip_phy_initialization usb: core: hcd: only check primary hcd skip_phy_initialization - - - --- 2024-11-05 Xu Yang New
usb: host: xhci-plat: set skip_phy_initialization if software node has XHCI_SKIP_PHY_INIT property usb: host: xhci-plat: set skip_phy_initialization if software node has XHCI_SKIP_PHY_INIT property - - - --- 2024-11-05 Xu Yang New
usb: dwc3: core: avoid reading register after bus clk is disabled usb: dwc3: core: avoid reading register after bus clk is disabled - - - --- 2024-11-05 Xu Yang New
[2/2] usb: chipidea: udc: create bounce buffer for problem sglist entries if possible [1/2] usb: chipidea: udc: limit usb request length to max 16KB 1 - - --- 2024-09-12 Xu Yang New
[1/2] usb: chipidea: udc: limit usb request length to max 16KB [1/2] usb: chipidea: udc: limit usb request length to max 16KB - - - --- 2024-09-12 Xu Yang New
[v5,5/5] arm64: dts: imx95-19x19-evk: add typec nodes and enable usb3 node [v5,1/5] dt-bindings: phy: imx8mq-usb: add compatible "fsl,imx95-usb-phy" - - - --- 2024-09-11 Xu Yang New
[v5,4/5] arm64: dts: imx95: add usb3 related nodes [v5,1/5] dt-bindings: phy: imx8mq-usb: add compatible "fsl,imx95-usb-phy" - - - --- 2024-09-11 Xu Yang New
[v5,3/5] phy: fsl-imx8mq-usb: add tca function driver for imx95 [v5,1/5] dt-bindings: phy: imx8mq-usb: add compatible "fsl,imx95-usb-phy" - 1 - --- 2024-09-11 Xu Yang New
[v3,2/2] ARM: dts: imx7ulp: add "nxp,sim" property for usbphy1 [v3,1/2] dt-bindings: phy: mxs-usb-phy: add nxp,sim property - - - --- 2024-09-03 Xu Yang New
[v2,3/3] arm64: dts: imx8mq-evk: add typec node [v2,1/3] dt-bindings: usb: gpio-sbu-mux: Add an entry for PTN36043 - - - --- 2024-08-01 Xu Yang New
[v2,2/3] arm64: dts: imx8mp-evk: add typec node [v2,1/3] dt-bindings: usb: gpio-sbu-mux: Add an entry for PTN36043 - - - --- 2024-08-01 Xu Yang New
[v2,1/3] dt-bindings: usb: gpio-sbu-mux: Add an entry for PTN36043 [v2,1/3] dt-bindings: usb: gpio-sbu-mux: Add an entry for PTN36043 1 - - --- 2024-08-01 Xu Yang New
[v2,6/6] ARM: dts: imx7ulp: add "nxp,sim" property for usbphy1 [v2,1/6] usb: phy: mxs: enable regulator phy-3p0 to improve signal qualilty - - - --- 2024-07-26 Xu Yang New
[6/6] ARM: dts: imx7ulp: add "nxp,sim" property for usbphy1 [1/6] usb: phy: mxs: Using regulator phy-3p0 - - - --- 2024-07-18 Xu Yang New
[3/6] dt-bindings: phy: mxs-usb-phy: add nxp,sim property [1/6] usb: phy: mxs: Using regulator phy-3p0 - - - --- 2024-07-18 Xu Yang New
[2/6] usb: phy: mxs: keep USBPHY2's clk always on [1/6] usb: phy: mxs: Using regulator phy-3p0 - - - --- 2024-07-18 Xu Yang New
[1/6] usb: phy: mxs: Using regulator phy-3p0 [1/6] usb: phy: mxs: Using regulator phy-3p0 - - - --- 2024-07-18 Xu Yang New
[v2] usb: dwc3: core: remove spin_lock/unlock_* to avoid deadlock when suspend gadget [v2] usb: dwc3: core: remove spin_lock/unlock_* to avoid deadlock when suspend gadget 1 - - --- 2024-05-27 Xu Yang New
usb: roles: try to get/put all relevant modules usb: roles: try to get/put all relevant modules - - - --- 2024-01-12 Xu Yang New
[v2,5/5] arm64: dts: imx93-11x11-evk: enable usb and typec nodes [v2,1/5] arm64: dts: imx8ulp: add usb nodes - - - --- 2023-12-18 Xu Yang New
[v2,4/5] arm64: dts: imx93: add usb nodes [v2,1/5] arm64: dts: imx8ulp: add usb nodes - - - --- 2023-12-18 Xu Yang New
[v2,3/5] dt-bindings: usb: ci-hdrc-usb2: add compatible and clock-names restriction for imx93 [v2,1/5] arm64: dts: imx8ulp: add usb nodes - - - --- 2023-12-18 Xu Yang New
[v2,2/5] arm64: dts: imx8ulp-evk: enable usb nodes and add ptn5150 nodes [v2,1/5] arm64: dts: imx8ulp: add usb nodes - - - --- 2023-12-18 Xu Yang New
[v2,1/5] arm64: dts: imx8ulp: add usb nodes [v2,1/5] arm64: dts: imx8ulp: add usb nodes - - - --- 2023-12-18 Xu Yang New
[v2,2/2] usb: typec: tcpci: enable vSafe0v Detection and Auto Discharge Disconnect for PTN5110 [v2,1/2] usb: typec: tcpci: add check code for tcpci/regmap_read/write() - - - --- 2023-09-14 Xu Yang New
[v2,1/2] usb: typec: tcpci: add check code for tcpci/regmap_read/write() [v2,1/2] usb: typec: tcpci: add check code for tcpci/regmap_read/write() - - - --- 2023-09-14 Xu Yang New
[2/2] usb: ehci: unlink itd/sitds from hardware list if the controller has stopped periodic schedule [1/2] usb: host: ehci-sched: add itd/sitd_unlink_urb() functions - - - --- 2023-07-18 Xu Yang New
[1/2] usb: host: ehci-sched: add itd/sitd_unlink_urb() functions [1/2] usb: host: ehci-sched: add itd/sitd_unlink_urb() functions - - - --- 2023-07-18 Xu Yang New
[2/2] usb: phy: mxs: add DT bindings to hold data line [1/2] dt-bindings: phy: fsl,mxs-usbphy: add fsl,hold-line-without-vbus property - - - --- 2023-06-14 Xu Yang New
[1/2] dt-bindings: phy: fsl,mxs-usbphy: add fsl,hold-line-without-vbus property [1/2] dt-bindings: phy: fsl,mxs-usbphy: add fsl,hold-line-without-vbus property - - - --- 2023-06-14 Xu Yang New
usb: typec: tcpci: allow drp toggling for non-drp port usb: typec: tcpci: allow drp toggling for non-drp port - - - --- 2023-06-08 Xu Yang New
[v3] usb: typec: tcpm: fix create duplicate source/sink-capabilities file [v3] usb: typec: tcpm: fix create duplicate source/sink-capabilities file - 2 - --- 2023-02-14 Xu Yang New
usb: chipidea: otg: handle vbus change for udc iff it's in device mode usb: chipidea: otg: handle vbus change for udc iff it's in device mode - - - --- 2022-12-07 Xu Yang New
[v2,4/4] arm64: dts: imx8mp-evk: add typec node typec orientation switch support via mux controller - - - --- 2022-08-23 Xu Yang New
[v2,3/4] usb: typec: mux: add typec orientation switch support via mux controller typec orientation switch support via mux controller - - - --- 2022-08-23 Xu Yang New
[v2,2/4] mux: convert to use fwnode interface typec orientation switch support via mux controller - - - --- 2022-08-23 Xu Yang New
[v2,1/4] dt-bindings: connector: Add typec orientation switch properties typec orientation switch support via mux controller - - - --- 2022-08-23 Xu Yang New
usb: chipidea: core: complement wakeup support for usb role switch usb: chipidea: core: complement wakeup support for usb role switch - - - --- 2022-08-12 Xu Yang New
usb: typec: tcpci: don't touch CC line which source Vconn usb: typec: tcpci: don't touch CC line which source Vconn - - - --- 2022-01-06 Xu Yang New
[v2] usb: typec: tcpm: fix issue of multiple tcpm_set_state [v2] usb: typec: tcpm: fix issue of multiple tcpm_set_state - - - --- 2021-10-11 Xu Yang New
[2/2] usb: typec: tcpm: Don't handle two continuous same state [1/2] usb: typec: tcpm: Fix up tcpm set delayed state which may not delay - - - --- 2021-08-24 Xu Yang New
[1/2] usb: typec: tcpm: Fix up tcpm set delayed state which may not delay [1/2] usb: typec: tcpm: Fix up tcpm set delayed state which may not delay - - - --- 2021-08-24 Xu Yang New